Jump to content

Aleksandar

Members
  • Posts

    6
  • Joined

  • Last visited

  1. Thank you all. Yes, there is edge on pins with letter L in pin name (354, 355, 362, 360 etc.)
  2. Hello, I'm using orangepi3 with latest Armbian 20.02 Why there is no egde file in /sys/class/gpio/gpioXXX/ like on the raspberrypi root@orangepi3:/sys/class/gpio/gpio117# ls -lh total 0 -rw-r--r-- 1 root root 4.0K Feb 4 13:59 active_low lrwxrwxrwx 1 root root 0 Feb 4 13:59 device -> ../../../gpiochip1 -rw-r--r-- 1 root root 4.0K Feb 4 13:57 direction drwxr-xr-x 2 root root 0 Feb 4 13:40 power lrwxrwxrwx 1 root gpio 0 Feb 4 13:40 subsystem -> ../../../../../../../class/gpio -rw-r--r-- 1 root root 4.0K Feb 4 13:40 uevent -rw-r--r-- 1 root root 4.0K Feb 4 13:40 value
  3. Hello, can somebody help me. I have OrangePi3 (Linux orangepi3 5.4.14-sunxi64 #rc1 SMP Sat Jan 25 15:46:08 CET 2020 aarch64 GNU/Linux ) running Armbian_20.02.0-rc1_Orangepi3_buster_current_5.4.14 This is the board with 26-pin header. There is no /dev/spi0.0 This is my /boot/armbianEnv.txt file verbosity=1 console=both overlay_prefix=sun50i-h6 rootdev=UUID=0b94dc1e-9162-435e-86d6-8a870add3ae5 rootfstype=ext4 overlays=spi-spidev param_spidev_spi_bus=0 param_spidev_spi_cs=0 param_spidev_max_freq=1000000 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u What else I can try to get /dev/spi Thanks
  4. I have working Amlogic S805, 2GB RAM and 8GB NAND flash (like this one: https://www.aliexpress.com/item/32476254383.html ) Booting with Armbian_5.67_Aml-s805_Debian_stretch_default_3.10.108_desktop_20181207.img with meson8b_m201_1G.dtb from Samsung 32GB uSD card. RTL8723BS working after modprobe 8723bs command Only 1GB RAM visible to armbian. Does anybody have dtb (dts) for this device with 2GB in device tree
  5. Hello All ! I have TV stick: Transpeed S805 with various aliexpress names (like this one: https://www.aliexpress.com/item/32476254383.html) I successfully booted with Armbian_5.67_Aml-s805_Debian_stretch_default_3.10.108_desktop_20181207.img with meson201_1gb.dtb I tried editnig dtb without success :=( My device have 2GB RAM and 8GB NAND flash, I get WiFi working after this command: modprobe 8723bs I can see android partitions because I boot from SD card ( i hink there is 4 partitions: data,cache,logo etc.) My question is: -How can I make Armbian reconize all RAM ( how to edit dtb file to support 2GB RAM???) -How to install Armbian to NAND flash on this device? I know there is no new post for months, but this is only rellevant place to ask Thank you Sasa
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines