Hugh Cole-Baker
-
Posts
3 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by Hugh Cole-Baker
-
-
On 5/16/2020 at 4:01 PM, jock said:
Hello, I join the discussion.
I'm trying the hantro/v4l2 system on a rk3288 tv box, Ubuntu Focal with recently compiled 5.5.19 kernel with patches coming from LibreELEC's master repository from Rockchip project applied. Hantro driver module is enabled and loaded. FFmpeg is taken from @Kwiboo's repository (v4l2-request-hwaccel-4.2.2) and compiled right now.
FFmpeg refuses to decode the stream with h264_v4l2m2m decoder and says it can't find a valid device.
Dmesg:
paolo@xt:~$ dmesg
[ 0.000000] Booting Linux on physical CPU 0x500
[ 0.000000] Linux version 5.5.19-rockchip (root@armbianbuild) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #trunk SMP PREEMPT Fri May 15 21:28:01 UTC 2020
[ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: XT-Q8L-V10-RK3288
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] cma: Reserved 16 MiB at 0x7f000000
[ 0.000000] On node 0 totalpages: 524288
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 196608 pages, LIFO batch:63
[ 0.000000] HighMem zone: 327680 pages, LIFO batch:63
[ 0.000000] percpu: Embedded 20 pages/cpu s51160 r8192 d22568 u81920
[ 0.000000] pcpu-alloc: s51160 r8192 d22568 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 522560
[ 0.000000] Kernel command line: earlyprintk root=UUID=6011cf83-f999-4cb4-8ff2-c014253b73ae rootwait rootfstype=ext4 console=ttyS2,115200n8 console=tty1 panic=10 consoleblank=0 loglevel=7 ubootpart= usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] allocated 2097152 bytes of page_ext
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 2023184K/2097152K available (15360K kernel code, 1098K rwdata, 3212K rodata, 2048K init, 4695K bss, 57584K reserved, 16384K cma-reserved, 1294336K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 45744 entries in 90 pages
[ 0.000000] ftrace: allocated 90 pages with 4 groups
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] random: get_random_bytes called from start_kernel+0x340/0x504 with crng_init=0
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000026] Switching to timer-based delay loop, resolution 41ns
[ 0.001734] Console: colour dummy device 80x30
[ 0.002422] printk: console [tty1] enabled
[ 0.002484] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.002536] pid_max: default: 32768 minimum: 301
[ 0.002736] LSM: Security Framework initializing
[ 0.002783] Yama: becoming mindful.
[ 0.002894] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.002942] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.003059] *** VALIDATE tmpfs ***
[ 0.003963] *** VALIDATE proc ***
[ 0.004346] *** VALIDATE cgroup1 ***
[ 0.004383] *** VALIDATE cgroup2 ***
[ 0.004419] CPU: Testing write buffer coherency: ok
[ 0.004481] CPU0: Spectre v2: using BPIALL workaround
[ 0.004955] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
[ 0.028041] Setting up static identity map for 0x100000 - 0x100060
[ 0.036030] rcu: Hierarchical SRCU implementation.
[ 0.052142] smp: Bringing up secondary CPUs ...
[ 0.085725] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
[ 0.085737] CPU1: Spectre v2: using BPIALL workaround
[ 0.117914] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
[ 0.117926] CPU2: Spectre v2: using BPIALL workaround
[ 0.150118] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
[ 0.150129] CPU3: Spectre v2: using BPIALL workaround
[ 0.150394] smp: Brought up 1 node, 4 CPUs
[ 0.150431] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[ 0.150462] CPU: All CPU(s) started in SVC mode.
[ 0.151554] devtmpfs: initialized
[ 0.166308] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
[ 0.166885] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.166949] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.168029] xor: measuring software checksum speed
[ 0.205009] arm4regs : 1042.000 MB/sec
[ 0.245117] 8regs : 803.000 MB/sec
[ 0.285234] 32regs : 801.000 MB/sec
[ 0.325349] neon : 1407.000 MB/sec
[ 0.325379] xor: using function: neon (1407.000 MB/sec)
[ 0.325471] pinctrl core: initialized pinctrl subsystem
[ 0.326283] thermal_sys: Registered thermal governor 'step_wise'
[ 0.327824] NET: Registered protocol family 16
[ 0.330922] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.331571] audit: initializing netlink subsys (disabled)
[ 0.333275] audit: type=2000 audit(0.328:1): state=initialized audit_enabled=0 res=1
[ 0.333342] cpuidle: using governor ladder
[ 0.333454] cpuidle: using governor menu
[ 0.334797] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.334843] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.361722] gpio gpiochip0: (gpio0): added GPIO chardev (254:0)
[ 0.361862] gpiochip_setup_dev: registered GPIOs 0 to 23 on device: gpiochip0 (gpio0)
[ 0.362320] gpio gpiochip1: (gpio1): added GPIO chardev (254:1)
[ 0.362445] gpiochip_setup_dev: registered GPIOs 24 to 55 on device: gpiochip1 (gpio1)
[ 0.362862] gpio gpiochip2: (gpio2): added GPIO chardev (254:2)
[ 0.363023] gpiochip_setup_dev: registered GPIOs 56 to 87 on device: gpiochip2 (gpio2)
[ 0.363451] gpio gpiochip3: (gpio3): added GPIO chardev (254:3)
[ 0.363566] gpiochip_setup_dev: registered GPIOs 88 to 119 on device: gpiochip3 (gpio3)
[ 0.363980] gpio gpiochip4: (gpio4): added GPIO chardev (254:4)
[ 0.364105] gpiochip_setup_dev: registered GPIOs 120 to 151 on device: gpiochip4 (gpio4)
[ 0.364518] gpio gpiochip5: (gpio5): added GPIO chardev (254:5)
[ 0.364640] gpiochip_setup_dev: registered GPIOs 152 to 183 on device: gpiochip5 (gpio5)
[ 0.365051] gpio gpiochip6: (gpio6): added GPIO chardev (254:6)
[ 0.365166] gpiochip_setup_dev: registered GPIOs 184 to 215 on device: gpiochip6 (gpio6)
[ 0.365598] gpio gpiochip7: (gpio7): added GPIO chardev (254:7)
[ 0.365745] gpiochip_setup_dev: registered GPIOs 216 to 247 on device: gpiochip7 (gpio7)
[ 0.366090] gpio gpiochip8: (gpio8): added GPIO chardev (254:8)
[ 0.366214] gpiochip_setup_dev: registered GPIOs 248 to 263 on device: gpiochip8 (gpio8)
[ 0.502444] raid6: neonx8 gen() 606 MB/s
[ 0.570616] raid6: neonx8 xor() 617 MB/s
[ 0.638811] raid6: neonx4 gen() 673 MB/s
[ 0.706960] raid6: neonx4 xor() 690 MB/s
[ 0.775173] raid6: neonx2 gen() 418 MB/s
[ 0.843313] raid6: neonx2 xor() 623 MB/s
[ 0.911486] raid6: neonx1 gen() 340 MB/s
[ 0.979633] raid6: neonx1 xor() 464 MB/s
[ 1.047812] raid6: int32x8 gen() 187 MB/s
[ 1.116134] raid6: int32x8 xor() 134 MB/s
[ 1.184322] raid6: int32x4 gen() 145 MB/s
[ 1.252355] raid6: int32x4 xor() 145 MB/s
[ 1.320542] raid6: int32x2 gen() 105 MB/s
[ 1.388845] raid6: int32x2 xor() 128 MB/s
[ 1.456971] raid6: int32x1 gen() 94 MB/s
[ 1.524994] raid6: int32x1 xor() 105 MB/s
[ 1.525024] raid6: using algorithm neonx4 gen() 673 MB/s
[ 1.525052] raid6: .... xor() 690 MB/s, rmw enabled
[ 1.525079] raid6: using neon recovery algorithm
[ 1.525948] reg-fixed-voltage vsys-regulator: GPIO lookup for consumer (null)
[ 1.525962] reg-fixed-voltage vsys-regulator: using device tree for GPIO lookup
[ 1.525998] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/vsys-regulator[0]'
[ 1.526025] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vsys-regulator[0]'
[ 1.526042] reg-fixed-voltage vsys-regulator: using lookup tables for GPIO lookup
[ 1.526055] reg-fixed-voltage vsys-regulator: No GPIO consumer (null) found
[ 1.526657] reg-fixed-voltage sdmmc-regulator: GPIO lookup for consumer (null)
[ 1.526670] reg-fixed-voltage sdmmc-regulator: using device tree for GPIO lookup
[ 1.526701] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/sdmmc-regulator[0]'
[ 1.526751] of_get_named_gpiod_flags: parsed 'gpio' property of node '/sdmmc-regulator[0]' - status (0)
[ 1.526795] gpio gpiochip7: Persistence not supported for GPIO 11
[ 1.527292] reg-fixed-voltage flash-regulator: GPIO lookup for consumer (null)
[ 1.527304] reg-fixed-voltage flash-regulator: using device tree for GPIO lookup
[ 1.527334] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/flash-regulator[0]'
[ 1.527359] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/flash-regulator[0]'
[ 1.527376] reg-fixed-voltage flash-regulator: using lookup tables for GPIO lookup
[ 1.527388] reg-fixed-voltage flash-regulator: No GPIO consumer (null) found
[ 1.527866] reg-fixed-voltage usb-host-regulator: GPIO lookup for consumer (null)
[ 1.527879] reg-fixed-voltage usb-host-regulator: using device tree for GPIO lookup
[ 1.527908] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/usb-host-regulator[0]'
[ 1.527953] of_get_named_gpiod_flags: parsed 'gpio' property of node '/usb-host-regulator[0]' - status (0)
[ 1.527987] gpio gpiochip0: Persistence not supported for GPIO 14
[ 1.528043] vcc_host_5v: supplied by vcc_sys
[ 1.528650] reg-fixed-voltage usb-otg-regulator: GPIO lookup for consumer (null)
[ 1.528664] reg-fixed-voltage usb-otg-regulator: using device tree for GPIO lookup
[ 1.528695] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/usb-otg-regulator[0]'
[ 1.528738] of_get_named_gpiod_flags: parsed 'gpio' property of node '/usb-otg-regulator[0]' - status (0)
[ 1.528771] gpio gpiochip0: Persistence not supported for GPIO 12
[ 1.528827] vcc_otg_5v: supplied by vcc_sys
[ 1.529861] iommu: Default domain type: Translated
[ 1.534377] SCSI subsystem initialized
[ 1.534709] usbcore: registered new interface driver usbfs
[ 1.534818] usbcore: registered new interface driver hub
[ 1.534934] usbcore: registered new device driver usb
[ 1.535080] mc: Linux media interface: v0.10
[ 1.535148] videodev: Linux video capture interface: v2.00
[ 1.535346] pps_core: LinuxPPS API ver. 1 registered
[ 1.535378] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.535440] PTP clock support registered
[ 1.537152] Bluetooth: Core ver 2.22
[ 1.537240] NET: Registered protocol family 31
[ 1.537270] Bluetooth: HCI device and connection manager initialized
[ 1.537313] Bluetooth: HCI socket layer initialized
[ 1.537349] Bluetooth: L2CAP socket layer initialized
[ 1.537405] Bluetooth: SCO socket layer initialized
[ 1.537520] NetLabel: Initializing
[ 1.537549] NetLabel: domain hash size = 128
[ 1.537573] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.537699] NetLabel: unlabeled traffic allowed by default
[ 1.538882] clocksource: Switched to clocksource arch_sys_counter
[ 2.996984] VFS: Disk quotas dquot_6.6.0
[ 2.997132] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.997469] FS-Cache: Loaded
[ 2.997500] *** VALIDATE ramfs ***
[ 2.997796] CacheFiles: Loaded
[ 3.013855] NET: Registered protocol family 2
[ 3.014951] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 12288 bytes, linear)
[ 3.015064] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 3.015197] TCP bind hash table entries: 8192 (order: 5, 163840 bytes, linear)
[ 3.015521] TCP: Hash tables configured (established 8192 bind 8192)
[ 3.015699] UDP hash table entries: 512 (order: 2, 24576 bytes, linear)
[ 3.015800] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes, linear)
[ 3.016209] NET: Registered protocol family 1
[ 3.017065] RPC: Registered named UNIX socket transport module.
[ 3.017104] RPC: Registered udp transport module.
[ 3.017131] RPC: Registered tcp transport module.
[ 3.017158] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.018122] Trying to unpack rootfs image as initramfs...
[ 3.777150] Freeing initrd memory: 8496K
[ 3.778713] hw perfevents: enabled with armv7_cortex_a12 PMU driver, 7 counters available
[ 3.781232] Initialise system trusted keyrings
[ 3.781569] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 3.791299] zbud: loaded
[ 3.793723] FS-Cache: Netfs 'nfs' registered for caching
[ 3.794588] NFS: Registering the id_resolver key type
[ 3.794645] Key type id_resolver registered
[ 3.794674] Key type id_legacy registered
[ 3.794718] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 3.795102] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled
[ 3.797680] *** VALIDATE xfs ***
[ 3.869116] async_tx: api initialized (async)
[ 3.869160] Key type asymmetric registered
[ 3.869188] Asymmetric key parser 'x509' registered
[ 3.869291] bounce: pool size: 64 pages
[ 3.869370] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 3.869660] io scheduler mq-deadline registered
[ 3.869697] io scheduler kyber registered
[ 3.879227] dma-pl330 ff250000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 3.879281] dma-pl330 ff250000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 3.880472] dma-pl330 ffb20000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 3.880525] dma-pl330 ffb20000.dma-controller: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
[ 3.881461] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.884029] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud = 1500000) is a 16550A
[ 3.885261] ff190000.serial: ttyS1 at MMIO 0xff190000 (irq = 39, base_baud = 1500000) is a 16550A
[ 3.886498] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 40, base_baud = 1500000) is a 16550A
[ 4.928436] printk: console [ttyS2] enabled
[ 4.934369] ff1b0000.serial: ttyS3 at MMIO 0xff1b0000 (irq = 41, base_baud = 1500000) is a 16550A
[ 4.947044] rockchip-vop ff930000.vop: Adding to iommu group 0
[ 4.954367] rockchip-vop ff940000.vop: Adding to iommu group 1
[ 4.965160] rockchip-drm display-subsystem: bound ff930000.vop (ops 0xc10767dc)
[ 4.974015] rockchip-drm display-subsystem: bound ff940000.vop (ops 0xc10767dc)
[ 4.982374] rockchip-drm display-subsystem: failed to bind ff980000.hdmi (ops 0xc107971c): -517
[ 4.992493] rockchip-drm display-subsystem: master bind failed: -517
[ 5.000092] usbcore: registered new interface driver udl
[ 5.011881] brd: module loaded
[ 5.030952] loop: module loaded
[ 5.037904] mdio_bus fixed-0: GPIO lookup for consumer reset
[ 5.037918] mdio_bus fixed-0: using lookup tables for GPIO lookup
[ 5.037931] mdio_bus fixed-0: No GPIO consumer reset found
[ 5.038061] libphy: Fixed MDIO Bus: probed
[ 5.042782] tun: Universal TUN/TAP device driver, 1.6
[ 5.048781] CAN device driver interface
[ 5.054701] rk_gmac-dwmac ff290000.ethernet: IRQ eth_lpi not found
[ 5.061822] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock
[ 5.068630] rk_gmac-dwmac ff290000.ethernet: phy regulator is not available yet, deferred probing
[ 5.080299] usbcore: registered new interface driver rt2500usb
[ 5.086983] usbcore: registered new interface driver rt73usb
[ 5.093430] usbcore: registered new interface driver rt2800usb
[ 5.100071] usbcore: registered new interface driver rtl8xxxu
[ 5.106625] usbcore: registered new interface driver rndis_wlan
[ 5.113362] usbcore: registered new interface driver cdc_ether
[ 5.119998] usbcore: registered new interface driver rndis_host
[ 5.127164] dwc2 ff540000.usb: ff540000.usb supply vusb_d not found, using dummy regulator
[ 5.136600] dwc2 ff540000.usb: ff540000.usb supply vusb_a not found, using dummy regulator
[ 5.203401] dwc2 ff540000.usb: DWC OTG Controller
[ 5.208762] dwc2 ff540000.usb: new USB bus registered, assigned bus number 1
[ 5.216752] dwc2 ff540000.usb: irq 45, io mem 0xff540000
[ 5.223128] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[ 5.232440] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.240573] usb usb1: Product: DWC OTG Controller
[ 5.245881] usb usb1: Manufacturer: Linux 5.5.19-rockchip dwc2_hsotg
[ 5.253027] usb usb1: SerialNumber: ff540000.usb
[ 5.259121] hub 1-0:1.0: USB hub found
[ 5.263425] hub 1-0:1.0: 1 port detected
[ 5.268853] dwc2 ff580000.usb: ff580000.usb supply vusb_d not found, using dummy regulator
[ 5.278292] dwc2 ff580000.usb: ff580000.usb supply vusb_a not found, using dummy regulator
[ 5.414986] dwc2 ff580000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM
[ 5.423685] dwc2 ff580000.usb: DWC OTG Controller
[ 5.429036] dwc2 ff580000.usb: new USB bus registered, assigned bus number 2
[ 5.437019] dwc2 ff580000.usb: irq 46, io mem 0xff580000
[ 5.443351] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05
[ 5.452666] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.460802] usb usb2: Product: DWC OTG Controller
[ 5.466109] usb usb2: Manufacturer: Linux 5.5.19-rockchip dwc2_hsotg
[ 5.473263] usb usb2: SerialNumber: ff580000.usb
[ 5.479453] hub 2-0:1.0: USB hub found
[ 5.483765] hub 2-0:1.0: 1 port detected
[ 5.490899] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.498248] ehci-platform: EHCI generic platform driver
[ 5.504685] usbcore: registered new interface driver usb-storage
[ 5.512277] usbcore: registered new interface driver iforce
[ 5.518669] usbcore: registered new interface driver xpad
[ 5.524923] usbcore: registered new interface driver usbtouchscreen
[ 5.532693] i2c /dev entries driver
[ 5.541286] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[ 5.549077] fan53555-reg: supplied by vcc_sys
[ 5.556494] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[ 5.564277] fan53555-reg: supplied by vcc_sys
[ 5.571871] REG1: supplied by vcc_sys
[ 5.577022] REG2: supplied by vcc_sys
[ 5.582207] REG3: supplied by vcc_sys
[ 5.587390] REG4: supplied by vcc_sys
[ 5.592733] REG5: supplied by vcc_sys
[ 5.598053] REG6: supplied by vcc_sys
[ 5.603394] REG7: supplied by vcc_sys
[ 5.607804] vcca_18: Bringing 3300000uV into 1800000-1800000uV
[ 5.616033] REG8: supplied by vcc_sys
[ 5.621337] REG9: supplied by vcc_sys
[ 5.626369] REG10: supplied by vcc_20
[ 5.631738] REG11: supplied by vcc_20
[ 5.637100] REG12: supplied by vcc_20
[ 5.645788] vcc_flash: supplied by vcc_io
[ 5.656486] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 5.666034] usb 1-1: new high-speed USB device number 2 using dwc2
[ 5.673127] random: fast init done
[ 5.677478] device-mapper: raid: Loading target version 1.15.1
[ 5.684336] Bluetooth: HCI UART driver ver 2.3
[ 5.689364] Bluetooth: HCI UART protocol H4 registered
[ 5.695156] Bluetooth: HCI UART protocol ATH3K registered
[ 5.695738] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00
[ 5.701286] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 5.710441] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.717572] usbcore: registered new interface driver bfusb
[ 5.725501] usb 1-1: Product: USB 2.0 Hub [MTT]
[ 5.732297] hub 1-1:1.0: USB hub found
[ 5.736898] usbcore: registered new interface driver btusb
[ 5.741158] hub 1-1:1.0: 4 ports detected
[ 5.747847] pwrseq_simple sdio0_pwrseq: GPIO lookup for consumer reset
[ 5.751759] pwrseq_simple sdio0_pwrseq: using device tree for GPIO lookup
[ 5.751816] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio0_pwrseq[0]' - status (0)
[ 5.751854] gpio gpiochip4: Persistence not supported for GPIO 28
[ 5.751890] pwrseq_simple sdio0_pwrseq: GPIO lookup for consumer reset
[ 5.751901] pwrseq_simple sdio0_pwrseq: using device tree for GPIO lookup
[ 5.751950] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio0_pwrseq[1]' - status (0)
[ 5.751978] gpio gpiochip4: Persistence not supported for GPIO 29
[ 5.752520] pwrseq_emmc emmc-pwrseq: GPIO lookup for consumer reset
[ 5.752533] pwrseq_emmc emmc-pwrseq: using device tree for GPIO lookup
[ 5.752584] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/emmc-pwrseq[0]' - status (0)
[ 5.752618] gpio gpiochip3: Persistence not supported for GPIO 9
[ 5.752888] sdhci: Secure Digital Host Controller Interface driver
[ 5.759863] sdhci: Copyright(c) Pierre Ossman
[ 5.764774] Synopsys Designware Multimedia Card Interface Driver
[ 5.772761] dwmmc_rockchip ff0c0000.dwmmc: IDMAC supports 32-bit address mode.
[ 5.780999] dwmmc_rockchip ff0c0000.dwmmc: Using internal DMA controller.
[ 5.788659] dwmmc_rockchip ff0c0000.dwmmc: Version ID is 270a
[ 5.795225] dwmmc_rockchip ff0c0000.dwmmc: DW MMC controller at irq 30,32 bit host data width,256 deep fifo
[ 5.806246] vcc_sd: supplied by vcc_io
[ 5.811234] dwmmc_rockchip ff0c0000.dwmmc: GPIO lookup for consumer cd
[ 5.811247] dwmmc_rockchip ff0c0000.dwmmc: using device tree for GPIO lookup
[ 5.811304] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/dwmmc@ff0c0000[0]' - status (0)
[ 5.811340] gpio gpiochip6: Persistence not supported for GPIO 22
[ 5.811378] dwmmc_rockchip ff0c0000.dwmmc: Got CD GPIO
[ 5.817198] dwmmc_rockchip ff0c0000.dwmmc: GPIO lookup for consumer wp
[ 5.817209] dwmmc_rockchip ff0c0000.dwmmc: using device tree for GPIO lookup
[ 5.817242] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ff0c0000[0]'
[ 5.817270] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ff0c0000[0]'
[ 5.817288] dwmmc_rockchip ff0c0000.dwmmc: using lookup tables for GPIO lookup
[ 5.817300] dwmmc_rockchip ff0c0000.dwmmc: No GPIO consumer wp found
[ 5.886927] usb 2-1: new high-speed USB device number 2 using dwc2
[ 5.912799] usb 2-1: New USB device found, idVendor=152d, idProduct=2338, bcdDevice= 1.00
[ 5.922015] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 5.930051] usb 2-1: Product: USB to ATA/ATAPI Bridge
[ 5.935740] usb 2-1: Manufacturer: JMicron
[ 5.936263] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 5.940365] usb 2-1: SerialNumber: D578E70881C3
[ 5.941927] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 5.963585] scsi host0: usb-storage 2-1:1.0
[ 5.964898] dwmmc_rockchip ff0d0000.dwmmc: IDMAC supports 32-bit address mode.
[ 5.976600] dwmmc_rockchip ff0d0000.dwmmc: Using internal DMA controller.
[ 5.984301] dwmmc_rockchip ff0d0000.dwmmc: Version ID is 270a
[ 5.990855] dwmmc_rockchip ff0d0000.dwmmc: DW MMC controller at irq 31,32 bit host data width,256 deep fifo
[ 6.002547] dwmmc_rockchip ff0d0000.dwmmc: GPIO lookup for consumer wp
[ 6.002560] dwmmc_rockchip ff0d0000.dwmmc: using device tree for GPIO lookup
[ 6.002597] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ff0d0000[0]'
[ 6.002625] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ff0d0000[0]'
[ 6.002644] dwmmc_rockchip ff0d0000.dwmmc: using lookup tables for GPIO lookup
[ 6.002656] dwmmc_rockchip ff0d0000.dwmmc: No GPIO consumer wp found
[ 6.002738] dwmmc_rockchip ff0d0000.dwmmc: allocated mmc-pwrseq
[ 6.009429] mmc_host mmc1: card is non-removable.
[ 6.135037] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 6.142926] usb 1-1.1: new low-speed USB device number 3 using dwc2
[ 6.158931] dwmmc_rockchip ff0f0000.dwmmc: IDMAC supports 32-bit address mode.
[ 6.167222] dwmmc_rockchip ff0f0000.dwmmc: Using internal DMA controller.
[ 6.174995] dwmmc_rockchip ff0f0000.dwmmc: Version ID is 270a
[ 6.181637] dwmmc_rockchip ff0f0000.dwmmc: DW MMC controller at irq 32,32 bit host data width,256 deep fifo
[ 6.193235] dwmmc_rockchip ff0f0000.dwmmc: GPIO lookup for consumer wp
[ 6.193247] dwmmc_rockchip ff0f0000.dwmmc: using device tree for GPIO lookup
[ 6.193284] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@ff0f0000[0]'
[ 6.193324] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@ff0f0000[0]'
[ 6.193364] dwmmc_rockchip ff0f0000.dwmmc: using lookup tables for GPIO lookup
[ 6.193377] dwmmc_rockchip ff0f0000.dwmmc: No GPIO consumer wp found
[ 6.193467] dwmmc_rockchip ff0f0000.dwmmc: allocated mmc-pwrseq
[ 6.200198] mmc_host mmc2: card is non-removable.
[ 6.213950] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 6.218617] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 6.231918] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 6.239742] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 6.244005] sdhci-pltfm: SDHCI platform and OF driver helper
[ 6.252849] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/power[0]' - status (0)
[ 6.252887] gpio gpiochip7: Persistence not supported for GPIO 2
[ 6.252895] no flags found for gpios
[ 6.253693] ledtrig-cpu: registered to indicate activity on CPUs
[ 6.260691] hid: raw HID events driver (C) Jiri Kosina
[ 6.261863] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 6.266987] usbcore: registered new interface driver usbhid
[ 6.278952] usbhid: USB HID core driver
[ 6.283787] ashmem: initialized
[ 6.291452] NET: Registered protocol family 10
[ 6.298086] Segment Routing with IPv6
[ 6.302375] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 6.310910] NET: Registered protocol family 17
[ 6.316012] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 6.318311] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 6.330571] can: controller area network core (rev 20170425 abi 9)
[ 6.330684] NET: Registered protocol family 29
[ 6.342428] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
[ 6.348680] Bluetooth: RFCOMM socket layer initialized
[ 6.354733] mmc2: new DDR MMC card at address 0001
[ 6.364546] Bluetooth: RFCOMM ver 1.11
[ 6.364571] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 6.364589] Bluetooth: HIDP socket layer initialized
[ 6.364859] 8021q: 802.1Q VLAN Support v1.8
[ 6.364902] lib80211: common routines for IEEE802.11 drivers
[ 6.364911] lib80211_crypt: registered algorithm 'NULL'
[ 6.364918] lib80211_crypt: registered algorithm 'WEP'
[ 6.364925] lib80211_crypt: registered algorithm 'CCMP'
[ 6.364933] lib80211_crypt: registered algorithm 'TKIP'
[ 6.364976] Key type dns_resolver registered
[ 6.365554] ThumbEE CPU extension supported.
[ 6.377000] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c312, bcdDevice= 1.01
[ 6.380184] mmc1: new high speed SDIO card at address 0001
[ 6.380943] Registering SWP/SWPB emulation handler
[ 6.382160] mmcblk2: mmc2:0001 NCard 7.22 GiB
[ 6.382742] mmcblk2boot0: mmc2:0001 NCard partition 1 4.00 MiB
[ 6.383395] mmcblk2boot1: mmc2:0001 NCard partition 2 4.00 MiB
[ 6.387694] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.387754] mmcblk2rpmb: mmc2:0001 NCard partition 3 128 KiB, chardev (241:0)
[ 6.395111] Loading compiled-in X.509 certificates
[ 6.397936] usb 1-1.1: Product: USB Multimedia Keyboard
[ 6.404513] zswap: loaded using pool lzo/zbud
[ 6.409090] usb 1-1.1: Manufacturer: LITEON Technology
[ 6.492252] input: LITEON Technology USB Multimedia Keyboard as /devices/platform/ff540000.usb/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C312.0001/input/input0
[ 6.508012] Key type ._fscrypt registered
[ 6.512555] Key type .fscrypt registered
[ 6.518443] Btrfs loaded, crc32c=crc32c-generic
[ 6.568033] hid-generic 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-ff540000.usb-1.1/input0
[ 6.575095] rockchip-drm display-subsystem: bound ff930000.vop (ops 0xc10767dc)
[ 6.592784] rockchip-drm display-subsystem: bound ff940000.vop (ops 0xc10767dc)
[ 6.601343] dwhdmi-rockchip ff980000.hdmi: Detected HDMI TX controller v2.00a with HDCP (DWC MHL PHY)
[ 6.612655] rockchip-drm display-subsystem: bound ff980000.hdmi (ops 0xc107971c)
[ 6.621002] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.628443] [drm] No driver support for vblank timestamp query.
[ 6.723146] dwhdmi-rockchip ff980000.hdmi: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13
[ 6.723159] dwhdmi-rockchip ff980000.hdmi: colorspace: YCbCr 4:2:2
[ 6.723169] dwhdmi-rockchip ff980000.hdmi: scan mode: Underscan
[ 6.723178] dwhdmi-rockchip ff980000.hdmi: colorimetry: ITU709
[ 6.723188] dwhdmi-rockchip ff980000.hdmi: picture aspect: 16:9
[ 6.723197] dwhdmi-rockchip ff980000.hdmi: active aspect: Same as Picture
[ 6.723206] dwhdmi-rockchip ff980000.hdmi: itc: No Data
[ 6.723216] dwhdmi-rockchip ff980000.hdmi: extended colorimetry: xvYCC 709
[ 6.723225] dwhdmi-rockchip ff980000.hdmi: quantization range: Limited
[ 6.723234] dwhdmi-rockchip ff980000.hdmi: nups: Unknown Non-uniform Scaling
[ 6.723244] dwhdmi-rockchip ff980000.hdmi: video code: 16
[ 6.723253] dwhdmi-rockchip ff980000.hdmi: ycc quantization range: Limited
[ 6.723262] dwhdmi-rockchip ff980000.hdmi: hdmi content type: Graphics
[ 6.723271] dwhdmi-rockchip ff980000.hdmi: pixel repeat: 0
[ 6.723282] dwhdmi-rockchip ff980000.hdmi: bar top 0, bottom 0, left 0, right 0
[ 6.723334] dwhdmi-rockchip ff980000.hdmi: HDMI infoframe: Source Product Description (SPD), version 1, length 25
[ 6.723343] dwhdmi-rockchip ff980000.hdmi: vendor: DW
[ 6.723353] dwhdmi-rockchip ff980000.hdmi: product: HDMI
[ 6.723363] dwhdmi-rockchip ff980000.hdmi: source device information: PC General (0x9)
[ 6.762940] usb 1-1.2: new full-speed USB device number 4 using dwc2
[ 6.787811] Console: switching to colour frame buffer device 240x67
[ 6.971363] usb 1-1.2: New USB device found, idVendor=045e, idProduct=0745, bcdDevice= 6.34
[ 6.974676] rockchip-drm display-subsystem: fb0: rockchipdrmfb frame buffer device
[ 6.981195] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.032010] usb 1-1.2: Product: Microsoft\xc2\xae Nano Transceiver v2.0
[ 7.032885] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
[ 7.039065] usb 1-1.2: Manufacturer: Microsoft
[ 7.040475] scsi 0:0:0:0: Direct-Access WDC WD25 00BEVS-60UST0 1A01 PQ: 0 ANSI: 2 CCS
[ 7.049607] rk_gmac-dwmac ff290000.ethernet: IRQ eth_lpi not found
[ 7.055775] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 7.063295] rk_gmac-dwmac ff290000.ethernet: PTP uses main clock
[ 7.071926] input: Microsoft Microsoft\xc2\xae Nano Transceiver v2.0 as /devices/platform/ff540000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:0745.0002/input/input1
[ 7.072242] sd 0:0:0:0: [sda] Write Protect is off
[ 7.072257] sd 0:0:0:0: [sda] Mode Sense: 00 38 00 00
[ 7.072865] sd 0:0:0:0: [sda] Asking for cache data failed
[ 7.072878] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 7.079214] rk_gmac-dwmac ff290000.ethernet: clock input or output? (input).
[ 7.089517] sda: sda1 sda2
[ 7.101845] rk_gmac-dwmac ff290000.ethernet: TX delay(0x30).
[ 7.110910] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.113722] rk_gmac-dwmac ff290000.ethernet: RX delay(0x10).
[ 7.147810] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Microsoft\xc2\xae Nano Transceiver v2.0] on usb-ff540000.usb-1.2/input0
[ 7.149288] rk_gmac-dwmac ff290000.ethernet: integrated PHY? (no).
[ 7.210321] input: Microsoft Microsoft\xc2\xae Nano Transceiver v2.0 Mouse as /devices/platform/ff540000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:045E:0745.0003/input/input2
[ 7.228471] rk_gmac-dwmac ff290000.ethernet: cannot get clock clk_mac_speed
[ 7.256848] input: Microsoft Microsoft\xc2\xae Nano Transceiver v2.0 Consumer Control as /devices/platform/ff540000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:045E:0745.0003/input/input3
[ 7.275970] rk_gmac-dwmac ff290000.ethernet: clock input from PHY
[ 7.329517] rk_gmac-dwmac ff290000.ethernet: init for RGMII
[ 7.342244] random: crng init done
[ 7.364598] rk_gmac-dwmac ff290000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[ 7.364611] hid-generic 0003:045E:0745.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft\xc2\xae Nano Transceiver v2.0] on usb-ff540000.usb-1.2/input1
[ 7.375408] input: Microsoft Microsoft\xc2\xae Nano Transceiver v2.0 Consumer Control as /devices/platform/ff540000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:045E:0745.0004/input/input4
[ 7.385105] rk_gmac-dwmac ff290000.ethernet: DWMAC1000
[ 7.462192] rk_gmac-dwmac ff290000.ethernet: DMA HW capability register supported
[ 7.471450] input: Microsoft Microsoft\xc2\xae Nano Transceiver v2.0 System Control as /devices/platform/ff540000.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:045E:0745.0004/input/input6
[ 7.483586] rk_gmac-dwmac ff290000.ethernet: RX Checksum Offload Engine supported
[ 7.514994] hid-generic 0003:045E:0745.0004: input,hiddev96,hidraw3: USB HID v1.11 Device [Microsoft Microsoft\xc2\xae Nano Transceiver v2.0] on usb-ff540000.usb-1.2/input2
[ 7.535925] rk_gmac-dwmac ff290000.ethernet: COE Type 2
[ 7.586188] rk_gmac-dwmac ff290000.ethernet: TX Checksum insertion supported
[ 7.607887] rk_gmac-dwmac ff290000.ethernet: Wake-Up On Lan supported
[ 7.628823] rk_gmac-dwmac ff290000.ethernet: Normal descriptors
[ 7.649012] rk_gmac-dwmac ff290000.ethernet: Ring mode enabled
[ 7.668960] rk_gmac-dwmac ff290000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 7.691453] mdio_bus stmmac-0: GPIO lookup for consumer reset
[ 7.691465] mdio_bus stmmac-0: using lookup tables for GPIO lookup
[ 7.691477] mdio_bus stmmac-0: No GPIO consumer reset found
[ 7.691490] rk_gmac-dwmac ff290000.ethernet: GPIO lookup for consumer snps,reset
[ 7.691501] rk_gmac-dwmac ff290000.ethernet: using device tree for GPIO lookup
[ 7.691542] of_get_named_gpiod_flags: can't parse 'snps,reset-gpios' property of node '/ethernet@ff290000[0]'
[ 7.691596] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/ethernet@ff290000[0]' - status (0)
[ 7.691636] gpio gpiochip4: Persistence not supported for GPIO 8
[ 8.756583] mdio_bus stmmac-0:00: GPIO lookup for consumer reset
[ 8.756604] mdio_bus stmmac-0:00: using lookup tables for GPIO lookup
[ 8.756622] mdio_bus stmmac-0:00: No GPIO consumer reset found
[ 8.769749] mdio_bus stmmac-0:01: GPIO lookup for consumer reset
[ 8.769763] mdio_bus stmmac-0:01: using lookup tables for GPIO lookup
[ 8.769776] mdio_bus stmmac-0:01: No GPIO consumer reset found
[ 8.777614] libphy: stmmac: probed
[ 8.794836] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 8.822615] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[ 8.851803] hctosys: unable to open rtc device (rtc0)
[ 8.871305] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 8.935730] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 8.956859] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 8.980165] cfg80211: failed to load regulatory.db
[ 9.005266] Freeing unused kernel memory: 2048K
[ 9.031377] Run /init as init process
[ 9.074608] dwhdmi-rockchip ff980000.hdmi: HDMI infoframe: Auxiliary Video Information (AVI), version 2, length 13
[ 9.100466] dwhdmi-rockchip ff980000.hdmi: colorspace: YCbCr 4:2:2
[ 9.100478] dwhdmi-rockchip ff980000.hdmi: scan mode: Underscan
[ 9.100487] dwhdmi-rockchip ff980000.hdmi: colorimetry: ITU709
[ 9.100497] dwhdmi-rockchip ff980000.hdmi: picture aspect: 16:9
[ 9.100506] dwhdmi-rockchip ff980000.hdmi: active aspect: Same as Picture
[ 9.100515] dwhdmi-rockchip ff980000.hdmi: itc: No Data
[ 9.100525] dwhdmi-rockchip ff980000.hdmi: extended colorimetry: xvYCC 709
[ 9.100534] dwhdmi-rockchip ff980000.hdmi: quantization range: Limited
[ 9.100548] dwhdmi-rockchip ff980000.hdmi: nups: Unknown Non-uniform Scaling
[ 9.295649] dwhdmi-rockchip ff980000.hdmi: video code: 16
[ 9.295666] dwhdmi-rockchip ff980000.hdmi: ycc quantization range: Limited
[ 9.338506] dwhdmi-rockchip ff980000.hdmi: hdmi content type: Graphics
[ 9.338517] dwhdmi-rockchip ff980000.hdmi: pixel repeat: 0
[ 9.338529] dwhdmi-rockchip ff980000.hdmi: bar top 0, bottom 0, left 0, right 0
[ 9.338607] dwhdmi-rockchip ff980000.hdmi: HDMI infoframe: Source Product Description (SPD), version 1, length 25
[ 9.338617] dwhdmi-rockchip ff980000.hdmi: vendor: DW
[ 9.338627] dwhdmi-rockchip ff980000.hdmi: product: HDMI
[ 9.338637] dwhdmi-rockchip ff980000.hdmi: source device information: PC General (0x9)
[ 10.683000] rtc-hym8563 0-0051: no valid clock/calendar values available
[ 10.740544] rtc-hym8563 0-0051: registered as rtc0
[ 10.769760] usbcore: registered new interface driver uas
[ 10.913187] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/button@0[0]' - status (0)
[ 10.913226] gpio gpiochip0: Persistence not supported for GPIO 5
[ 10.913611] input: gpio-keys as /devices/platform/gpio-keys/input/input7
[ 27.765417] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 30.598730] systemd[1]: System time before build time, advancing clock.
[ 30.908535] systemd[1]: systemd 245.4-4ubuntu3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 30.960591] systemd[1]: Detected architecture arm.
[ 31.174177] systemd[1]: Set hostname to <xt>.
[ 31.518220] ttyS2 - failed to request DMA
[ 35.422219] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket \xe2\x86\x92 /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 36.818995] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[ 36.845760] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[ 36.874325] systemd[1]: Created slice system-modprobe.slice.
[ 36.909514] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 36.944743] systemd[1]: Created slice User and Session Slice.
[ 36.977679] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 37.014055] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 37.051290] systemd[1]: Reached target User and Group Name Lookups.
[ 37.084634] systemd[1]: Reached target Remote File Systems.
[ 37.116767] systemd[1]: Reached target Slices.
[ 37.147386] systemd[1]: Reached target Swap.
[ 37.234850] systemd[1]: Listening on Syslog Socket.
[ 37.267426] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 37.304097] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 37.341993] systemd[1]: Listening on Journal Audit Socket.
[ 37.377769] systemd[1]: Listening on Journal Socket (/dev/log).
[ 37.414606] systemd[1]: Listening on Journal Socket.
[ 37.450273] systemd[1]: Listening on udev Control Socket.
[ 37.486161] systemd[1]: Listening on udev Kernel Socket.
[ 37.522124] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 37.555136] systemd[1]: Mounting POSIX Message Queue File System...
[ 37.603127] systemd[1]: Mounting Kernel Debug File System...
[ 37.650795] systemd[1]: Mounting Kernel Trace File System...
[ 37.700092] systemd[1]: Starting Journal Service...
[ 37.754723] systemd[1]: Starting Restore / save the current clock...
[ 37.804541] systemd[1]: Starting Set the console keyboard layout...
[ 37.855900] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 37.898342] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[ 37.933903] systemd[1]: Started Nameserver information manager.
[ 37.975614] systemd[1]: Reached target Network (Pre).
[ 38.126504] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 38.151233] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 38.251480] systemd[1]: Starting Load Kernel Modules...
[ 38.294456] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 38.340209] systemd[1]: Starting udev Coldplug all Devices...
[ 38.388454] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 38.395055] systemd[1]: Mounted POSIX Message Queue File System.
[ 38.449750] systemd[1]: Mounted Kernel Debug File System.
[ 38.482713] systemd[1]: Mounted Kernel Trace File System.
[ 38.520741] systemd[1]: Finished Restore / save the current clock.
[ 38.559708] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 38.608893] systemd[1]: Finished Load Kernel Modules.
[ 38.648057] systemd[1]: Finished Remount Root and Kernel File Systems.
[ 38.685623] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 38.715507] systemd[1]: Mounting Kernel Configuration File System...
[ 38.803539] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 38.825502] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[ 38.856164] systemd[1]: Starting Load/Save Random Seed...
[ 38.896819] systemd[1]: Starting Apply Kernel Variables...
[ 38.937333] systemd[1]: Starting Create System Users...
[ 38.975459] systemd[1]: Started Journal Service.
[ 39.220058] systemd-journald[328]: Received client request to flush runtime journal.
[ 39.906948] vcc_sd: disabling
[ 40.133270] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 44.534321] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 500000 KHz
[ 44.536292] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz
[ 45.039584] gpiomem-rk3288 ff750000.rk3288-gpiomem: Initialised: Registers at 0xff750000
[ 45.421260] zram: Added device: zram0
[ 45.421559] zram: Added device: zram1
[ 45.421835] zram: Added device: zram2
[ 45.437026] rk3288-crypto ff8a0000.cypto-controller: Crypto Accelerator successfully registered
[ 46.356324] gpio_ir_recv ir-receiver: GPIO lookup for consumer (null)
[ 46.356332] gpio_ir_recv ir-receiver: using device tree for GPIO lookup
[ 46.356357] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ir-receiver[0]' - status (0)
[ 46.356377] gpio gpiochip7: Persistence not supported for GPIO 0
[ 46.356431] Registered IR keymap rc-xt-q8l-v10
[ 46.475824] IR NEC protocol handler initialized
[ 46.486613] zram1: detected capacity change from 0 to 1049657344
[ 46.502971] rc rc0: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0
[ 46.503098] rc rc0: lirc_dev: driver gpio_ir_recv registered at minor = 0, raw IR receiver, no transmitter
[ 46.503185] input: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc0/input8
[ 46.596631] hantro_vpu: module is from the staging directory, the quality is unknown, you have been warned.
[ 46.597920] hantro-vpu ff9a0000.video-codec: Adding to iommu group 2
[ 46.599784] hantro-vpu ff9a0000.video-codec: registered rockchip,rk3288-vpu-enc as /dev/video0
[ 46.599957] hantro-vpu ff9a0000.video-codec: registered rockchip,rk3288-vpu-dec as /dev/video1
[ 46.684092] panfrost ffa30000.gpu: clock rate = 400000000
[ 46.685282] panfrost ffa30000.gpu: mali-t760 id 0x750 major 0x0 minor 0x0 status 0x1
[ 46.685290] panfrost ffa30000.gpu: features: 00000000,100277bf, issues: 00000000,24040400
[ 46.685295] panfrost ffa30000.gpu: Features: L2:0x07120206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002830 AS:0xff JS:0x7
[ 46.685306] panfrost ffa30000.gpu: shader_present=0xf l2_present=0x1
[ 46.687951] [drm] Initialized panfrost 1.1.0 20180908 for ffa30000.gpu on minor 1
[ 46.754484] rockchip-rga ff920000.rga: HW Version: 0x00.00
[ 46.755012] rockchip-rga ff920000.rga: Registered rockchip-rga as /dev/video2
[ 47.374934] Adding 1025052k swap on /dev/zram1. Priority:5 extents:1 across:1025052k SSFS
[ 47.426699] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/soundcard-spdif[0]'
[ 47.426712] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/soundcard-spdif[0]'
[ 47.427836] asoc-simple-card soundcard-spdif: dit-hifi <-> ff8b0000.sound mapping ok
[ 48.310527] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac-ap6330-sdio for chip BCM4330/4
[ 48.397633] zram0: detected capacity change from 0 to 52428800
[ 49.515844] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac-ap6330-sdio for chip BCM4330/4
[ 49.515915] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[ 49.516256] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4330/4 wl0: Jan 23 2013 17:46:35 version 5.90.195.114 FWID 01-cafa6b3e
[ 49.539570] ieee80211 phy0: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 184
[ 49.539578] ieee80211 phy0: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 188
[ 49.539582] ieee80211 phy0: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 192
[ 49.539586] ieee80211 phy0: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 196
[ 49.539590] ieee80211 phy0: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 200
[ 49.539594] ieee80211 phy0: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 204
[ 49.539598] ieee80211 phy0: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 208
[ 49.539601] ieee80211 phy0: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 212
[ 49.539605] ieee80211 phy0: brcmf_construct_chaninfo: Ignoring unexpected firmware channel 216
[ 50.222518] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/soundcard-hdmi[0]'
[ 50.222560] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/soundcard-hdmi[0]'
[ 50.225047] asoc-simple-card soundcard-hdmi: i2s-hifi <-> ff890000.i2s mapping ok
[ 50.839116] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard
[ 50.839150] ext4 filesystem being mounted at /var/log supports timestamps until 2038 (0x7fffffff)
[ 73.216273] rk_gmac-dwmac ff290000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211E Gigabit Ethernet]
[ 73.226937] rk_gmac-dwmac ff290000.ethernet eth0: No Safety Features support found
[ 73.226948] rk_gmac-dwmac ff290000.ethernet eth0: PTP not supported by HW
[ 73.226956] rk_gmac-dwmac ff290000.ethernet eth0: configuring for phy/rgmii link mode
[ 75.587000] ieee80211 phy0: brcmf_p2p_create_p2pdev: timeout occurred
[ 75.587031] ieee80211 phy0: brcmf_cfg80211_add_iface: add iface p2p-dev-wlan0 type 10 failed: err=-5
[ 91.914473] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 99.110595] fuse: init (API version 7.31)
[ 99.110743] *** VALIDATE fuse ***
[ 99.110762] *** VALIDATE fuse ***Queries with v4l2-vctl:
paolo@xt:~$ v4l2-ctl --list-devices && v4l2-ctl -d 1 --list-ctrls --list-formats
rockchip,rk3288-vpu-enc (platform: hantro-vpu):
/dev/video0
/dev/video1
/dev/media0rockchip-rga (platform:rga):
/dev/video2
Codec Controlsmpeg_2_slice_parameters 0x009909fa (unknown): type=103 flags=has-payload
mpeg_2_quantization_matrices 0x009909fb (unknown): type=104 flags=has-payload
h264_sequence_parameter_set 0x00990ce8 (unknown): type=110 flags=has-payload
h264_picture_parameter_set 0x00990ce9 (unknown): type=111 flags=has-payload
h264_scaling_matrix 0x00990cea (unknown): type=112 flags=has-payload
h264_slice_parameters 0x00990ceb (unknown): type=113 flags=has-payload
h264_decode_parameters 0x00990cec (unknown): type=114 flags=has-payload
h264_decode_mode 0x00990ced (menu) : min=1 max=1 default=1 value=1
h264_start_code 0x00990cee (menu) : min=1 max=1 default=1 value=1
vp8_frame_header 0x009910d0 (unknown): type=301 flags=has-payload
ioctl: VIDIOC_ENUM_FMT
Type: Video Capture Multiplanar[0]: 'NV12' (Y/CbCr 4:2:0)
This is the result of trying to run ffmpeg (with -loglevel debug):
paolo@xt:~/Downloads$ ffmpeg -loglevel debug -hwaccel drm -c:v h264_v4l2m2m -i bbb_sunflower_1080p_30fps_normal.mp4 -f null -
ffmpeg version 755190b-Kodi Copyright (c) 2000-2019 the FFmpeg developers
built with gcc 9 (Ubuntu 9.3.0-10ubuntu2)
configuration: --arch=armhf --extra-libs='-Lpthread -Lm' --disable-debug --enable-stripping --enable-gpl --enable-nonfree --enable-logging --disable-doc --enable-pic --enable-optimizations --enable-ffmpeg --enable-avdevice --enable-avcodec --enable-avformat --enable-swscale --enable-postproc --enable-avfilter --disable-devices --enable-pthreads --disable-w32threads --enable-network --disable-gnutls --disable-gray --enable-swscale-alpha --disable-small --enable-dct --enable-fft --enable-mdct --enable-rdft --disable-crystalhd --disable-vaapi --disable-vdpau --enable-libdrm --enable-version3 --enable-runtime-cpudetect --enable-hardcoded-tables --enable-encoder=ac3 --enable-encoder=aac --enable-encoder=wmav2 --enable-encoder=mjpeg --enable-encoder=png --enable-hwaccels --enable-muxer=spdif --enable-muxer=adts --enable-muxer=asf --enable-muxer=ipod --enable-muxer=mpegts --enable-demuxers --enable-parsers --enable-bsfs --enable-filters --enable-bzlib --enable-libspeex --enable-libx264 --enable-libx265 --enable-zlib --enable-asm --enable-neon --enable-libass --enable-libfdk-aac --enable-libfreetype --enable-libmp3lame --enable-libopus --enable-libvorbis --enable-libvpx --enable-openssl --enable-libv4l2 --enable-v4l2-request --enable-libudev
libavutil 56. 31.100 / 56. 31.100
libavcodec 58. 54.100 / 58. 54.100
libavformat 58. 29.100 / 58. 29.100
libavdevice 58. 8.100 / 58. 8.100
libavfilter 7. 57.100 / 7. 57.100
libswscale 5. 5.100 / 5. 5.100
libswresample 3. 5.100 / 3. 5.100
libpostproc 55. 5.100 / 55. 5.100
Splitting the commandline.
Reading option '-loglevel' ... matched as option 'loglevel' (set logging level) with argument 'debug'.
Reading option '-hwaccel' ... matched as option 'hwaccel' (use HW accelerated decoding) with argument 'drm'.
Reading option '-c:v' ... matched as option 'c' (codec name) with argument 'h264_v4l2m2m'.
Reading option '-i' ... matched as input url with argument 'bbb_sunflower_1080p_30fps_normal.mp4'.
Reading option '-f' ... matched as option 'f' (force format) with argument 'null'.
Reading option '-' ... matched as output url.
Finished splitting the commandline.
Parsing a group of options: global .
Applying option loglevel (set logging level) with argument debug.
Successfully parsed a group of options.
Parsing a group of options: input url bbb_sunflower_1080p_30fps_normal.mp4.
Applying option hwaccel (use HW accelerated decoding) with argument drm.
Applying option c:v (codec name) with argument h264_v4l2m2m.
Successfully parsed a group of options.
Opening an input file: bbb_sunflower_1080p_30fps_normal.mp4.
[NULL @ 0x1f47ad0] Opening 'bbb_sunflower_1080p_30fps_normal.mp4' for reading
[file @ 0x1f48290] Setting default whitelist 'file,crypto'
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x1f47ad0] Format mov,mp4,m4a,3gp,3g2,mj2 probed with size=2048 and score=100
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x1f47ad0] ISO: File Type Major Brand: isom
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x1f47ad0] Unknown dref type 0x206c7275 size 12
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x1f47ad0] Setting codecpar->delay to 2 for stream st: 0
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x1f47ad0] Unknown dref type 0x206c7275 size 12
Last message repeated 1 times
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x1f47ad0] Before avformat_find_stream_info() pos: 276134913 bytes read:252639 seeks:1 nb_streams:3
[h264 @ 0x1f48e90] nal_unit_type: 7(SPS), nal_ref_idc: 3
[h264 @ 0x1f48e90] nal_unit_type: 8(PPS), nal_ref_idc: 3
[h264 @ 0x1f48e90] nal_unit_type: 6(SEI), nal_ref_idc: 0
[h264 @ 0x1f48e90] nal_unit_type: 5(IDR), nal_ref_idc: 3
[h264 @ 0x1f48e90] Format yuv420p chosen by get_format().
[h264 @ 0x1f48e90] Reinit context to 1920x1088, pix_fmt: yuv420p
[h264 @ 0x1f48e90] no picture
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x1f47ad0] All info found
[mov,mp4,m4a,3gp,3g2,mj2 @ 0x1f47ad0] After avformat_find_stream_info() pos: 305350 bytes read:350943 seeks:2 frames:38
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'bbb_sunflower_1080p_30fps_normal.mp4':
Metadata:
major_brand : isom
minor_version : 1
compatible_brands: isomavc1
creation_time : 2013-12-16T17:44:39.000000Z
title : Big Buck Bunny, Sunflower version
artist : Blender Foundation 2008, Janus Bager Kristensen 2013
comment : Creative Commons Attribution 3.0 - http://bbb3d.renderfarming.net
genre : Animation
composer : Sacha Goedegebure
Duration: 00:10:34.53, start: 0.000000, bitrate: 3481 kb/s
Stream #0:0(und), 16, 1/30000: Video: h264 (High), 1 reference frame (avc1 / 0x31637661), yuv420p(left), 1920x1080 (1920x1088) [SAR 1:1 DAR 16:9], 0/1, 2998 kb/s, 30 fps, 30 tbr, 30k tbn, 60 tbc (default)
Metadata:
creation_time : 2013-12-16T17:44:39.000000Z
handler_name : GPAC ISO Video Handler
Stream #0:1(und), 21, 1/48000: Audio: mp3 (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 160 kb/s (default)
Metadata:
creation_time : 2013-12-16T17:44:42.000000Z
handler_name : GPAC ISO Audio Handler
Stream #0:2(und), 1, 1/48000: Audio: ac3 (ac-3 / 0x332D6361), 48000 Hz, 5.1(side), fltp, 320 kb/s (default)
Metadata:
creation_time : 2013-12-16T17:44:42.000000Z
handler_name : GPAC ISO Audio Handler
Side data:
audio service type: main
Successfully opened the file.
Parsing a group of options: output url -.
Applying option f (force format) with argument null.
Successfully parsed a group of options.
Opening an output file: -.
Successfully opened the file.
[h264_v4l2m2m @ 0x1f7cc10] probing device /dev/video2
[h264_v4l2m2m @ 0x1f7cc10] driver 'hantro-vpu' on card 'rockchip,rk3288-vpu-dec'
[h264_v4l2m2m @ 0x1f7cc10] v4l2 output format not supported
[h264_v4l2m2m @ 0x1f7cc10] probing device /dev/video1
[h264_v4l2m2m @ 0x1f7cc10] driver 'hantro-vpu' on card 'rockchip,rk3288-vpu-enc'
[h264_v4l2m2m @ 0x1f7cc10] v4l2 output format not supported
[h264_v4l2m2m @ 0x1f7cc10] probing device /dev/video0
[h264_v4l2m2m @ 0x1f7cc10] driver 'rockchip-rga' on card 'rockchip-rga'
[h264_v4l2m2m @ 0x1f7cc10] v4l2 output format not supported
[h264_v4l2m2m @ 0x1f7cc10] Could not find a valid device
[h264_v4l2m2m @ 0x1f7cc10] can't configure decoder
Stream mapping:
Stream #0:0 -> #0:0 (h264 (h264_v4l2m2m) -> wrapped_avframe (native))
Stream #0:2 -> #0:1 (ac3 (native) -> pcm_s16le (native))
Error while opening decoder for input stream #0:0 : Invalid argument
[AVIOContext @ 0x1f504b0] Statistics: 350943 bytes read, 2 seeksThe h264_v4l2m2m decoder in FFmpeg is only for stateful decoders like the Amlogic VPU. The stateless decoders hantro and rkvdec use a different approach in FFmpeg, using the "h264" decoder but with hardware acceleration using v4l2-request API. Try using this ffmpeg command, which worked for testing decoding with the rkvdec on my rk3399 board:
ffmpeg -loglevel debug -hwaccel drm -i bbb_sunflower_1080p_30fps_normal.mp4 -f null -
or change the "-f null -" to "-pix_fmt bgra -f fbdev /dev/fb0" to output video to the Linux framebuffer device while X11 or Wayland aren't running, for example.
-
@piter75 Are you planning to send the ATF "switch power domains on before reset" patch upstream to https://review.trustedfirmware.org/ ? It fixes the issue with mainline ATF + Linux where Linux will hang after rebooting; I have tested the patch with my own custom build of Debian and it now reboots 100% successfully. It would be really useful for all mainline distros if it was applied to mainline ATF.
Mainline VPU
in Rockchip
Posted
A couple of other reasons I can think of why it wouldn't work: Does the user you're running ffmpeg as have write permission on /dev/video*, /dev/media* and /dev/dri/card* devices? And did the compile time checks for v4l2_request support in FFmpeg pass? (you need to see v4l2_request under "External libraries providing hardware acceleration:", and h264_v4l2request under "Enabled hwaccels:", in the output of FFmpeg's configure script when you're compiling it). For the FFmpeg configure checks to pass, AFAIK you need the kernel headers from a recent kernel with v4l2-request support installed, e.g. kernel v5.6.