Jump to content

Henry Delphing

  • Posts

    4
  • Joined

  • Last visited

Reputation Activity

  1. Like
    Henry Delphing reacted to XFer012 in OrangePi Zero2 - Allwinner H616   
    Ok, so let's see the steps I followed.
     
    1. Installed Armbian Unstable for OrangePi Zero2:
    https://imola.armbian.com/dl/orangepizero2/nightly/Armbian_21.05.0-trunk.77_Orangepizero2_hirsute_edge_5.11.11.img.xz
     
    2. Forced ethernet at 100 mbit/s, otherwise it did not work: added in /etc/rc.local
    ethtool -s eth0 speed 100 duplex full autoneg off
     
    3. Downloaded hexdump's precompiled kernel (derived from jernej's 5.11.0rc1 kernel):
    https://github.com/hexdump0815/linux-mainline-and-mali-allwinner-h6-kernel/releases/download/5.11.0-rc1-stb-616%2B/5.11.0-rc1-stb-616+.tar.gz
     
    4. Extracted the various parts and fixed the symlinks:
    Image -> Image-5.11.0-rc1-stb-616+
    uInitrd -> uInitrd-5.11.0-rc1-stb-616+
    dtb -> dtb-5.11.0-rc1-stb-616+
     
    5. Inside dtb-5.11.0-rc1-stb-616+, created a new folder "allwinner" and moved the 3 .dtb there; otherwise, initramfs would not find them
     
    6. Rebooted. Voilà, we now have a working mainline-ish kernel (patched 5.11.0rc1) with USB support!
    [ 57.289791] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 57.454110] usb-storage 2-1:1.0: USB Mass Storage device detected [ 57.454976] scsi host0: usb-storage 2-1:1.0 [ 59.122397] scsi 0:0:0:0: Direct-Access Lexar USB Flash Drive 1100 PQ: 0 ANSI: 6 [ 59.124408] sd 0:0:0:0: [sda] 125038592 512-byte logical blocks: (64.0 GB/59.6 GiB) [ 59.125522] sd 0:0:0:0: [sda] Write Protect is off [ 59.125549] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 59.126563] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 59.163290] sda: sda1 sda2 [ 59.168389] sd 0:0:0:0: [sda] Attached SCSI removable disk  
  2. Like
    Henry Delphing got a reaction from Werner in OrangePi Zero2 - Allwinner H616   
    I have tested with the daily version of 3/30/2021.    I found that I2C worked.   USB not worked. 
    Two image are added.  These images are what I have captured.
    (*) Also, I have noticed that Wifi is not ready either.
     
     


×
×
  • Create New...