serge.lenz

Thank you Igor! Problem solved.

Hello, Can somebody help me to boot Armbian with mainline kernel on Rock Pi 4B v1.3? I tried several Armbian images but noone boots. The Radxa Linux images is working without problem. So downloaded Armbian_19.11.3_Rockpi-4b_buster_current_5.3.11_desktop.7z and extracted .img. Then using dd I write it on SD card (I use USB cardreader so device is /dev/sdd). dd if=Armbian_19.11.3_Rockpi-4b_buster_current_5.3.11_desktop.img of=/dev/sdd bs=1M sync sync I have connected serial console and this is last lines of output: - cut - Boot1: 2018-04-08, version: 1.12 CPUId = 0x0 ChipType = 0x10, 219 SdmmcInit=2 0 BootCapSize=100000 UserCapSize=29600MB FwPartOffset=2000 , 100000 mmc0:cmd5,32 SdmmcInit=0 0 BootCapSize=0 UserCapSize=30528MB FwPartOffset=2000 , 0 StorageInit ok = 183254 LoadTrustBL Addr:0x4000 No find trust.img! LoadTrustBL error:-3 LoadTrustBL No find bl30.bin Load uboot, ReadLba = 2000 hdr 00000000031907e0 + 0x0:0x50,0x41,0x52,0x4d,0x50,0x01,0x00,0x00,0x46,0x49,0x52,0x4d,0x57,0x41,0x52,0x45, Load OK, addr=0x200000, size=0xa6f2c RunBL31 0x10000 NOTICE: BL31: v1.3(debug):65aa5ce NOTICE: BL31: Built : 10:47:37, Jun 19 2018 NOTICE: BL31: Rockchip release version: v1.1 INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3 INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 0 INFO: plat_rockchip_pmu_init(1151): pd status 3e INFO: BL31: Initializing runtime services INFO: BL31: Initializing BL32 INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-170-gc4654a6 #16 Wed May 30 08:54:30 UTC 2018 aarch64) INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2 INF [0x0] TEE-CORE:init_teecore:83: teecore inits done INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x200000 INFO: SPSR = 0x3c9 U-Boot 2014.10-RK3399-06-03326-g0212c98-dirty (Nov 03 2018 - 14:00:25) CPU: rk3399 cpu version = 0 CPU's clock information: aplll = 816000000HZ apllb = 24000000HZ gpll = 800000000HZ aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ aclk_periph_l0 = 266666666HZ, hclk_periph_l0 = 88888888HZ, pclk_periph_l0 = 44444444HZ hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ cpll = 800000000HZ dpll = 800000000HZ vpll = 24000000HZ npll = 24000000HZ ppll = 676000000HZ Board: Rockchip platform Board Uboot as second level loader DRAM: Found dram banks: 1 Adding bank:0000000000200000(00000000ffe00000) Reserve memory for trust os. dram reserve bank: base = 0x08400000, size = 0x01e00000 128 MiB SdmmcInit = 0 0 SDCard Update. storage init OK! Using default environment GetParam W: Invalid Parameter's tag (0x00000000)! Invalid parameter No pmic detect. CPU's clock information: aplll = 816000000HZ apllb = 24000000HZ gpll = 800000000HZ aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ aclk_periph_l0 = 266666666HZ, hclk_periph_l0 = 88888888HZ, pclk_periph_l0 = 44444444HZ hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ cpll = 800000000HZ dpll = 800000000HZ vpll = 24000000HZ npll = 24000000HZ ppll = 676000000HZ misc partition not found! SecureBootEn = 0, SecureBootLock = 0 #Boot ver: 0000-00-00#0.00 empty serial no. normal boot. no fuel gauge found no fuel gauge found read logo on state from dts [0] no fuel gauge found 'recovery' does not seem to be a partition nor an address Unable to boot:recovery try to start backup 'backup' does not seem to be a partition nor an address Unable to boot:backup try to start rockusb - cut - Kernel not even started. One thing: I have eMMC module installed but it empty now, may be its important? What I can do to boot it?