dasgeraet

I need help i won´t only make an update on cubietruck and bpi-r1 to the last version 5.25 or 5.27 not more. I make apt-get update and apt-get upgrade then i have 5.31 i won´t only 5.2x. Gives an way for an update to 5.2x sorry for my poor english

igor tip is running but "petrmaje" yes i need scripts but i don´t have there to change the default gateway after reconnect petrmaje is not an critical setup only for me is an travel router for holiday and living by friends my config ####BOND Config auto eth0.101 iface eth0.101 inet manual bond-master bond0 bond-primary eth0.101 pre-up swconfig dev eth0 set reset 1 pre-up swconfig dev eth0 set enable_vlan 1 pre-up swconfig dev eth0 vlan 101 set ports '3 8t' pre-up swconfig dev eth0 set apply 1 auto ppp0 iface ppp0 inet wvdial provider t-mobile bond-master bond0 ####bond0 auto bond0 iface bond0 inet dhcp bond-mode active-backup bond-miimon 100 bond-slaves none thanks for helping and sorry for my bad english

I need help with an BPI-R1 router setup with umts as fail-backup line. The eth0.101 as gateway to the inet router works fine from router and client but the umts ppp0 line not working from client only connect to umts from the bpi-r1. Igor can you make an section only for howtos greetinx dasgeraet

Lamobo-r1_Debian_3.1_jessie_4.0.5.raw first test locking good I make more test can you help him too http://forum.armbian.com/index.php/topic/73-ftdi-ft232-on-cubietruck/im think thats the same probleme

Test with older kernel root@lamobo:~# wvdial t-mobile --> WvDial: Internet dialer version 1.61 --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Sending: AT+CGDCONT=1,"IP","internet.t-mobile","0.0.0.0", 0,0 AT+CGDCONT=1,"IP","internet.t-mobile","0.0.0.0", 0,0 OK --> Modem initialized. --> Sending: ATDT*99# --> Waiting for carrier. ATDT*99# CONNECT --> Carrier detected. Starting PPP immediately. --> Starting pppd at Fri Jan 1 01:13:00 2010 --> Pid of pppd: 3719 --> Using interface ppp0 --> pppd: â–’â–’ â–’â–’[01][10]â–’â–’[01] --> pppd: â–’â–’ â–’â–’[01][10]â–’â–’[01] --> pppd: â–’â–’ â–’â–’[01][10]â–’â–’[01] --> pppd: â–’â–’ â–’â–’[01][10]â–’â–’[01] --> pppd: â–’â–’ â–’â–’[01][10]â–’â–’[01] --> pppd: â–’â–’ â–’â–’[01][10]â–’â–’[01] --> local IP address 10.51.78.212 --> pppd: â–’â–’ â–’â–’[01][10]â–’â–’[01] --> remote IP address 10.64.64.64 --> pppd: â–’â–’ â–’â–’[01][10]â–’â–’[01] --> primary DNS address 10.74.210.210 --> pppd: â–’â–’ â–’â–’[01][10]â–’â–’[01] --> secondary DNS address 10.74.210.211 --> pppd: â–’â–’ â–’â–’[01][10]â–’â–’[01] --> pppd: â–’â–’ â–’â–’[01][10]â–’â–’[01] --> Connect time 0.1 minutes. --> pppd: â–’â–’ â–’â–’[01][10]â–’â–’[01] --> pppd: â–’â–’ â–’â–’[01][10]â–’â–’[01] --> pppd: â–’â–’ â–’â–’[01][10]â–’â–’[01] --> Disconnecting at Fri Jan 1 01:13:06 2010 --> The PPP daemon has died: A modem hung up the phone (exit code = 16) --> man pppd explains pppd error codes in more detail. --> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information. --> Auto Reconnect will be attempted in 5 seconds --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Sending: AT+CGDCONT=1,"IP","internet.t-mobile","0.0.0.0", 0,0 ^CCaught signal 2: Attempting to exit gracefully... AT+CGDCONT=1,"IP","internet.t-mobile","0.0.0.0", 0,0 OK --> Modem initialized. --> Disconnecting at Fri Jan 1 01:13:07 2010

Yes it is an E220 and he works under bananian 1501 but not under yours image and not under bananian 1504, ls /dev/tty/USB* No such file or directory i have make an test with bananian 1501 upgrade to 1504 install to sata and e220 umts. umts work wlan/hostap works but not stable under yours image the i think the hostap is stable and works good but not the umts stick. I have also two cubietrucks with yours jessie image and the work fine and i won´t all devices under your image i think you make the better work best wishes from germany

_ _ ____ _ | | __ _ _ __ ___ ___ | |__ ___ | _ \/ | | | / _` | '_ ` _ \ / _ \| '_ \ / _ \ | |_) | | | |__| (_| | | | | | | (_) | |_) | (_) | | _ <| | |_____\__,_|_| |_| |_|\___/|_.__/ \___/ |_| \_\_| Last login: Sat Jun 13 19:45:21 2015 from 192.168.227.151 Load: 0.83, 0.81, 0.85 - Memory: 960Mb root@ct-router:~# modprobe usb-ohci FATAL: Module usb-ohci not found. root@ct-router:~# modprobe usb-uhci FATAL: Module usb-uhci not found. root@ct-router:~# modprobe usbserial vendor=0x12d1 product=0x1001 FATAL: Module usbserial not found. root@ct-router:~# modprobe usbserial vendor=0x12d1 product=0x1003 FATAL: Module usbserial not found. root@ct-router:~# mknod /dev/ttyUSB0 c 188 0 root@ct-router:~# mknod /dev/ttyUSB1 c 188 1 root@ct-router:~# mknod /dev/ttyUSB2 c 188 2 root@ct-router:~# ls -la /dev/ttyU* crw-r--r-- 1 root root 188, 0 Jun 14 17:15 /dev/ttyUSB0 crw-r--r-- 1 root root 188, 1 Jun 14 17:15 /dev/ttyUSB1 crw-r--r-- 1 root root 188, 2 Jun 14 17:15 /dev/ttyUSB2 root@ct-router:~# rmmod usb-storage libkmod: ERROR ../libkmod/libkmod-module.c:1802 kmod_module_get_holders: could not open '/sys/module/usb_storage/holders': No such file or directory Error: Module usb_storage is in use root@ct-router:~# rmmod usb-serial Error: Module usb_serial is not currently loaded root@ct-router:~# lsusb Bus 002 Device 002: ID 0bda:8178 Realtek Semiconductor Corp. RTL8192CU 802.11n WLAN Adapter Bus 003 Device 002: ID 12d1:1001 Huawei Technologies Co., Ltd. E169/E620/E800 HSDPA Modem Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub root@ct-router:~# modprobe usbserial vendor=0x12d1 product=0x1001 FATAL: Module usbserial not found. root@ct-router:~# wvdial t-mobile --> WvDial: Internet dialer version 1.61 --> Cannot open /dev/ttyUSB2: No such device or address --> Cannot open /dev/ttyUSB2: No such device or address --> Cannot open /dev/ttyUSB2: No such device or address root@ct-router:~# --> WvDial: Internet dialer version 1.61 -bash: --: command not found root@ct-router:~# --> Cannot open /dev/ttyUSB2: No such device or address -bash: --: command not found root@ct-router:~# --> Cannot open /dev/ttyUSB2: No such device or address -bash: --: command not found root@ct-router:~# --> Cannot open /dev/ttyUSB2: No such device or address -bash: --: command not found root@ct-router:~# --> WvDial: Internet dialer version 1.61 -bash: --: command not found root@ct-router:~# --> Cannot open /dev/ttyUSB2: No such device or address -bash: --: command not found root@ct-router:~# --> Cannot open /dev/ttyUSB2: No such device or address -bash: --: command not found root@ct-router:~# --> Cannot open /dev/ttyUSB2: No such device or address -bash: --: command not found

Helllo i have problems with an huwei e220 usb umts stick ther i don´t working under igor image only with banian 14.01 the stick is working