Riccardo

Members
  • Content Count

    2
  • Joined

  • Last visited

  1. This is the boot log with the most recent version of Armbian, this log is without the fdtfile in the armbianEnv.txt file. Furthermore another try is with the following lines on the armbianEnv.txt and this is the updated log. verbosity=1 logo=disabled console=both disp_mode=1920x1080p60 overlay_prefix=sun7i-a20 rootdev=UUID=c763af3a-602f-4526-a9a8-7c8516acaffd rootfstype=ext4 overlays=i2c2 spi-spidev param_spidev_spi_bus=0 fdtfile=sun7i-a20-bananapi-m1-plus.dtb usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u
  2. Hi, I am trying to use the SPI interface on the board GPIOs of a BananaPi M1+. I have started the latest version of Armbian available for this board (Armbian_19.11.6_Bananapi_bionic_current_5.4.8) and after the initial configuration the "/boot/armbianEnv.txt" file has the following added lines: fdtfile=sun7i-a20-bananapi-m1-plus.dtb overlays=spi-add-cs1 spi-spidev param_spidev_spi_bus=0 I have rebooted but I am unable to use the spidevX.Y under the "/dev" folder. What am I missing? NOTE: I have tried several combinations of values on the armbianEnv.txt configuration file (ie: using only overlays flags without the other ones, using only the spi-spidev flag, etc...), none succeeded.