Jump to content

garysn

Members
  • Posts

    2
  • Joined

  • Last visited

Everything posted by garysn

  1. Hi Igor, thanks for your fast reply. Today I had the time to check it and indeed, after prepraring the emmc card with nand-sata-install script now everything works fine :-) Thanks again garysn
  2. Hi, I'm proud owner of an ODROID XU4 REV 0.1 20180912 and would like to use your latest Image. Here are the steps I have done on my Win 10 - 1803 PC: Downloading your image file from your site Unpacking with 7zip to .img Starting Etcher Portable 1.5.63 Select the .img file Connect my eMMC card (16GB) to my CardReader This card is auto-selected by Etcher as Target device Click on Flash Etcher tranfers the image to the eMMC card and then validates it. When ready i close Etcher, remove the card safely from my PC and put it onto my ODROID-XU4 I connect only a LAN cable and a power cable to the ODROID XU 4. The on-board boot select switch selects eMMC as boot device The ventilator starts to run, the ethernet leds starts blinking, that’s all When I connect a Monitor via HDMI and/or a mouse, keyboard and/or external SSD -> same result No desktop ist displayed, no IP address is assigned (I have checked this on my router) To check if I do anything wrong I exactly repeated the above steps but this time I used the standard Ubuntu image that I had downloded from the ODROID website. With this image my ODROID-XU4 starts Ubuntu and runs without any problems. I hope this helps to find the problem. Thanks a lot for your support. garysn
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines