Wilhelm Moser

In fact all versions since kernel 5.10.?? are broken and stop at u-boot. Better the Uboot shall dive down and never ever come up to bother us. Finally I managed to install bullseye by using a buster image, deactivtion kernel upgrade and removed the armbian.list from /etc/apt/ Then I changed source list from buster to bullseye apt update apt upgrade -y apt full-upgrade -y thats it. And i is really a shame to fool the community by uploading untested software.

Is the thread dead?

Looks like the solution will take it's time. Is there any Ubuntu image that is known to work if I dd the installer to the emmc?

Soo. the pinebook ist dead as dead can be... and now?

Tried all possibilities: formatted emmc to one ext4 partition - dead removed emmc - dead inserted new Armbian_22.02.1_Pinebook-pro_focal_current_5.15.25_xfce_desktop.img with an 16GB SD-Card - dead! OK... will insert emmc again and awaiting solutions.. I do not have an idea by now.

Well, well. same problem here. As far as I remember I did not have the problem with the buster image and a dd to the emmc wasn' a problem ether.

tried with dhcp and static at /etc/network/interfaces.d/eth0 but with auto eth0 added allow-hotplug eth0 too... currently on ubuntu 20.4 but hell - ping changed from network not reachable to Destination host not reachable... some efforts.. still no network device in /dev but ethtool -S eth0 shows some data - almost all 0 Can't help but I think there is a bug between Kernel 5.4 and network?-manager sorry but I am not very good in driver and kernel tasks my focus is on LXC-Containers

further report of findings: Armbian Focal desktop mainline based kernel 5.4.y - no eth0 Buster desktop 5.4 - no eth0, hwinfo says hardware OK and shows eth0, but no entry at /dev Buster server 4.4 - eth0 OK buster server 4.4 Would be good if there is a solution for buster desktop 5.4 as the installation of i.e. LXDE on buster server 4.4 is crude - somehow.. No pulseaudio and even apt-get install lxde delivers only the lxde-core. Funny that one have to install xorg before as the lxde packages does not resolve the dependency.

buster 2020-06-03 installed without any issues - screen recon OK, screen size OK, network dhcp out of the box Thank you

OK - will use buster 2020-06-03 and revert with result

Hi there, I have a very strange issue: kernel 5.4.14-rockchip64 debian_version 10.3 Armbian 20.02.0-rc1 stable cable is OK - checked eth0 in /etc/network/interfaces.d/eth0 set to dhcp ---- unfortunately the rockpro64 gave up with an hardware ram issue The unit was replaced and luckily I have an image: March 3, 2020 which was OK and fully functional. Today I threw it on the SD-Card and I do not have a NIC at all. A.m. Data drawn from the OS hwinfo issues RTL8211F irq:0 27 "eth0" lshw network:0 eth0 id9 with MAC network:1 DISABLED dummy0 ip a dummy0 down (Never had this scrap before) eth0: NO CARRIER ip link show dummy0 down eth0: BROADCAST UP... state UP Any ideas what happens here???? What am I missing??? Thank you - willi btw: my rockpros take about 90 seconds to boot up and I do have to power on/off the screen 2 times before the interface realizes that it has got a screen????

sorry - problem solved - I had the damn xfce4 without gtk support installed

Hi, I have sort of a strange problem. 1.) lxc buster container built on armbian rockpro64 compiled OpenCPN built and installed the deb package without any issues. 2.) tried to install the package and faced wxWidget issues though I added the wxWidgets ppa and did a apt install *wxwidgets* BUT got this error: ----------------------------------- root@rockpro64:~/postinstall/opencpn/OpenCPN/build# cmake ../ -- cmake version: 3.13.4 -- *** Build Architecture is arm64 -- Setting C++11 standard via cmake standard mechanism -- Default compiler options: -- CMAKE_CXX_FLAGS: -- CMAKE_CXX_FLAGS_DEBUG: -g -- CMAKE_CXX_FLAGS_MINSIZEREL: -Os -DNDEBUG -- CMAKE_CXX_FLAGS_RELEASE: -O3 -DNDEBUG -- CMAKE_CXX_FLAGS_RELWITHDEBINFO: -O2 -g -DNDEBUG CMake Error at cmake/TargetSetup.cmake:46 (string): string sub-command STRIP requires two arguments. Call Stack (most recent call first): CMakeLists.txt:551 (include) CMake Error at cmake/TargetSetup.cmake:47 (string): string no output variable specified Call Stack (most recent call first): CMakeLists.txt:551 (include) -- *** Staging to build opencpn 5.0.522 *** -------------------------------------------- And I believe this is NOT an OpenCPN problem as the build on the lxc buster was fine. Tks for help.