keynight

How do I dump a bootloader?

I checked and it does not work for me. Compared with meson-sm1-sei610.dtb, they are very different

Cool, my dump : sm1_ac213_4g_TranSpeed.dtb

Can you check with this dtd files meson-sm1-sei610-ethfix.dtb meson-sm1-sei610-ethfix.dts meson-sm1-sei610-ethfix.dts meson-sm1-sei610-ethfix.dtb

Oh my congratulations! Tell me about the details. - what image, how do you copy it to SD - which bootloader

I also had such thoughts about another firmware, when I realized that the Firmware-Update Tool is not updated from the local / usb disk. Have you tried the toothpick method yet? At the same time, it shows the recovery menu for me, but it still does not update from the flash drive. For me i find it easy to press the button inside jack and then connect the DC power jack release button after 1 second.

I think i need sm1_ac213_4g.dtb, Where can i find this file? cat /proc/device-tree/amlogic-dt-id sm1_ac213_4g

is written x88pro-s905X3-D4-V1.0. I can boot from SD. dd if=u-boot-<model>.img of=/dev/<SD_card> conv=fsync bs=1 count=442 dd if=u-boot-<model>.img of=/dev/<SD_card> conv=fsync bs=512 skip=1 seek=1 u-boot file for support model https://yadi.sk/d/PIGjwjZ4m4HKqg

Just got an Transpeed X3 plus (S905X3 based). 4GB RAM, 64GB eMMC. It does boot from the SD as far as I can see. I try Armbian image for RK + AML + AW with g12a and sm1 dtb files. But i have only this on display: During the boot process, I see 4 penguins, as I have 4 cores, but they are very poorly drawn, only outlines. Then they run "OK", as if the download process is happening, but apart from OK, nothing is visible, and OK is very poorly visible. When it ends I can press "Enter" and "OK" is shifted up, but the login prompt is not visible. Over the network, I do not see DHCP requests. IP does not receive. Any Ideas ?