dsivier

Members
  • Content Count

    2
  • Joined

  • Last visited

About dsivier

  • Rank
    Newbie

Recent Profile Visitors

327 profile views
  1. dear tkaiser, yes http://forum.lemaker.org/thread-15430-1-1.htmlthis was my first try using search in internet. i can get changes on the TFT but w/o good results, i mean i can get a smaller desktop in upper left corner and black on remaining parts or changing again a freezing monitor, today i was following another way finding this http://linux-sunxi.org/Fex_Guide#disp_init_configurationand using fex2bin and bin2fex, The converter works! the results are same as using fbset . I agree there is something on behind that cannot permit resolution change in flexible way out of predefined table (on TV LED all the HDMI preset are ok). Back on Raspberry with working res via config.txt the fbset give me this out: mode "1024x576" geometry 1024 576 1024 576 16 timings 0 0 0 0 0 0 0 rgba 5/11,6/5,5/0,0/16 (in rc.local nothing written) obviously putting this numbers on fb.modes an running fbset on O PI PC nothing is working as expected. i hope can help thanks
  2. dear, new here than sorry if wrong place for this post. i got since one week O PI-PC and for the price so happy. i have only one issue, using SunFounder 7" 1024x600 TFT that on Raspberry PI is easy to get working in config.txt hdmi_cvt=1024 576 60 3 0 0 0 hdmi_group=2 hdmi_mode=87 hdmi_drive=2 i loaded Armbian now, but tested also other images. Tested the fb.modes, fbset etc, but no way, screen on hdmi is nice but out of the borders all the time. I'm using these boards for SDR saving coax cable via rtl_tcp, this is the reason a small portable screen is nice to be used. thanks if any suggestion