Thomasas

4.meson-gxm-nexbox-a1.dtb still negative result..

Thanks, after Your replay, i have tested: 1.meson-gxm-q201 2.meson-gxm-khadas-vim2, but on dbt list i see only one vim2 version. 3.meson-gxm-s912-libretech-pc result the same.. strange when i see people in forum who says that working dbt is meson-gxm-q201 or 200. why not working on tvbox, i have fresh version of box, no custom firmware installed no other modification. on uboot list i see only one right version - odroid-n2, its at least amologic version, aim right?

Thanks for reply! yes i have read all instructions really carefully + all in red too: 1. I have downloaded image - Armbian_20.05.0_Arm-64_focal_current_5.6.0-rc4_desktop_20200311.img.xz 2. Using balenaEtcher installed directly to my samsung sd card 64 gb. 3. Downloaded and installed with balenaEtcher to the same sd card u-boot "new version" - u-boot-odroid-n2.img. 4. Edited file uEnv.txt : "LINUX=/zImage INITRD=/uInitrd # aml s9xxx FDT=/dtb/amlogic/meson-gxm-q200.dtb APPEND=root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0" 5. booted fresh new Tanix tx9s android and maunted prepared sd card. 6. Clicked on "Select" local update and chose the file on the removable media aml_autoscript.zip 8. Start "Update" 9. System reboot twice (as disribed, its blinked 2 times) and after no hdmi signal, no info. waited more than 20 minutes. (all i see on my screen is only TV info - HDMI1, so no signal from tvbox) Sd card good working and pretty fast, plus after iso install with balenaEtcher i make validate write on success. If You have the same Tv box, please tell me what i miss, maybe problem with uboot file, wish i have to choose? Again, thanks for Your hard work and answers.

hello friends, Trying to install armbian (ubuntu, debian versions) on Tanix Tx9s about 2 days.. I have read all instructions but still no success. I have try with sdcard and USB stick: 1. ota android update. 2. toothpick method. Using edited file meson-gxm-q200.dtb in /boot/uEnv.txt (in comment uEnv.ini???): "LINUX=/zImage INITRD=/uInitrd # aml s9xxx FDT=/dtb/amlogic/meson-gxm-q200.dtb APPEND=root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0" i have try meson-gxm-q201.dtb too. on boot recovery i see error: "aml_autoscript.zip e:failed to map my file." on armbian forum i have found same error message, so i try to solve: I made a copy of the 'aml_autoscript' file and renamed it to 'factory_update_param.ubt' still the same error message.. People, how install a armbian on Tx9s, how to solve this problem, please help..