Guys! I have two of the original Pine64+ boards from the kickstarter (with LCD) and tried to launch the latest armbian image on them. Both of them freezes in u-boot after it tries to evaluate USB connections...
Rather strange, they work well with the ancient original images.
```
U-Boot SPL 2019.10-armbian (Feb 17 2020 - 09:25:19 +0100)
DRAM: 2048 MiB
Trying to boot from MMC1
NOTICE: BL31: v2.2(debug):9560593-dirty
NOTICE: BL31: Built : 09:25:06, Feb 17 2020
NOTICE: BL31: Detected Allwinner A64/H64/R18 SoC (1689)
NOTICE: BL31: Found U-Boot DTB at 0x4095dd0, model: Pine64+
INFO: ARM GICv2 driver initialized
INFO: Configuring SPC Controller
INFO: PMIC: Probing AXP803 on RSB
INFO: PMIC: dcdc1 voltage: 3.300V
INFO: PMIC: dcdc5 voltage: 1.360V
INFO: PMIC: dcdc6 voltage: 1.100V
INFO: PMIC: dldo1 voltage: 3.300V
INFO: PMIC: Enabling DC SW
INFO: BL31: Platform setup done
INFO: BL31: Initializing runtime services
INFO: BL31: cortex_a53: CPU workaround for 843419 was applied
INFO: BL31: cortex_a53: CPU workaround for 855873 was applied
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x4a000000
INFO: SPSR = 0x3c9
U-Boot 2019.10-armbian (Feb 17 2020 - 09:25:19 +0100) Allwinner Technology
CPU: Allwinner A64 (SUN50I)
Model: Pine64+
DRAM: 2 GiB
MMC: mmc@1c0f000: 0
Loading Environment from EXT4... ** File not found /boot/boot.env **
** Unable to read "/boot/boot.env" from mmc0:1 **
In: serial
Out: serial
Err: serial
Net: phy interface7
Could not get PHY for ethernet@1c30000: addr 1
eth-1: ethernet@1c30000
230454 bytes read in 13 ms (16.9 MiB/s)
starting USB...
Bus usb@1c1a000: USB EHCI 1.00
Bus usb@1c1a400: USB OHCI 1.0
Bus usb@1c1b000: USB EHCI 1.00
Bus usb@1c1b400: USB OHCI 1.0
scanning bus usb@1c1a000 for devices... 1 USB Device(s) found
scanning bus usb@1c1a400 for devices... 1 USB Device(s)␀
```
That [nul] character comes randomly at the first or second USB scanning attempt. PSU is big enough (3A) and is powered via the header pins.
Thanks,
Denes