crazyquark

Started work here: https://github.com/crazyquark/armbian-build I forked the kernel source from the official Mars repo(split off only kernel sources). Will be building an image and testing it in my Mars board.

Hello, I would like to add support for Milk-V Mars in the Armbian build system. Right now I am building for visionfive2(build boots fine with u-boot in spi) and intend to see if I can reuse the DTBs produced by the Milk-V Mars official SDK build(https://github.com/milkv-mars/mars-buildroot-sdk/releases/). I am looking for guidance on how to proceed. The board has the same SoC as the Visionfive2 but different peripherals (USB, m.2). L.E. I realized that the bootloader from the image cannot boot the image, the “official “ u-boot from SPI flash is used instead. Possibly due to some incompatible config.

Hi all, I wanted to do some cross arch builds on my newly installed Armbian on an Odroid-HC1 buuut, it seems binfmt_misc support is not enabled in the kernel. Can I enable it somehow without recompiling the kernel? Thank you for this great image, kernel 5.4, omg!

Ok, switched to nightly, patched the DTB and now I have /dev/spidev0.0 and 0.1. Thanks, guys!

OK, thanks, will try this!

Understood, and to enable it, one would have to re-compile the kernel? Or I can just download a patched DTS and compile it to DTB? Thanks for the prompt reply.

Hi, I've been trying to enable SPI on my Odroid-C2 running Armbian Buster but I can't figure it out, I tried with overlays, modprobe-ing the modules, nothing works. I've uploaded my logs.