aliend
-
Posts
8 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by aliend
-
-
1 hour ago, martinayotte said:
You seems to confuse between "1" and "l" ...
I correct my fstab file but still i can't automount sd card (there in no any u-boot sectors in sdcard)
/dev/mmcblk0p1 /mnt ext4 0 1
-
Hi
first of all Please excuse my poor English !
I install ubuntu lagecy server on my orange pi pc + and then install it on nand using : $nand-sata-install
now when i power on my board with sd card (sd card without any image file) my root file system will mount on mmcb1k0p1 and if I insert my sd card after power on root will mount on mmcb1k1p1 (I now both mmcb1k1p1 & mmcb1k0p1 are my emmc)
Now i need to automount my sd card and in my case I insert sd card before power on and as a result I add this line in fstab file
#/dev/mmcb1k0p1 /mnt ext4 0 1
but it doesn't work !
how can i mount my sd card automatically ?
-
Hi
first of all sorry for my bad English .I have an OPI PC + ,I install Ubuntu on my sd card and after boot i used nand-sata-install command to use may nand but when i tryied to use my sd card (after format sd card) it did't work and after reboot i receive "panic= boot argument"
how can i use my sd card and mount it when my dist installed on nand?
even i checked this link for Cubietruck but it wasn't useful for OPI , and then i checked this and it was really hopeful but I don't now how can i exactly implement this .Actually I need to auto mount my sd card as a result when I reboot my OPI PC + I need my OPI boot from emmc instead of sd card.
thank you for your attention
-
HI again
I tried to add selinux and(or) Apparmor to my kernel modules , after kernel compile with Xenial, Jessie and wheezy dist on my OPI pc plue and OPI lite i installed this two modules packages and i tried to set them in enforce mode but i couldn't .
some errors are like :
check-selinux-installation
../proc/1 kernel..
SELinux is not enabled.
The init process (PID 1) is running in an incorrect domain.or :
$sestatus
SELinux is disabled
even when i set it in enforce mod or permissive and reboot my system still it was disabled
Anyway has anyone tried it before? and anyone has any idea for my problem ?
thanks.
-
Hi
I tried to install selinux on my OPI Jessie but i find out selinux-policy-default has problem with debian jessie and even it's not integrated with kernel .after all i tried to use apparmor but it's not integrated too.I find this doc to cross compile and add apparmor or selinux but seems it's not work because
git clone https://github.com/orangepi-xunlong/u-boot-orangepi.gitdoesn't exist !
After all ,how can i use selinux or apparmor on my OPI?
-
You can't, not with this chip. Limited by firmware.
I understood something about it , can I change it ? how ?where is firmware sources and compiled firmware location(/path) ? -
Hi,
I have Cubietrauck and I installed legacy Jessie on SD card and after configuration hostapd for using it as access point only 5 devices were able to connect to my device. After search I’ve added max_num_sta=20 but it didn’t solve my problem.
I tried to use other distribution like vanilla Jessie and vanilla trusty server but I had same problem.
Here is my hostapd configuration:interface=wlan0
driver=nl80211
ssid=ssid
hw_mode=g
channel=9
macaddr_acl=0
auth_algs=1
ignore_broadcast_ssid=0
wpa=2
wpa_passphrase=mypassword
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP
rsn_pairwise=CCMP
max_num_sta=20How can I change max devices connection? Is this problem relate to the wifi module and how can I fix it?
hostapd on orange pi light realtek driver
in Allwinner sunxi
Posted
Hi
I have same problem with PC+ with Armbian5.25 Ubuntu xenial 3.4.113 and even i downgrade hostapd to 2.1 and still it doesn't accept password and I can't connect with PC and mobile .