Nikeb

Hi , same issue here, i tried some dtb , i can manage to make it run but the ethernet and wifi doesn't work (it's not blinking), it detects some eth0 but can't connect (even on boot is not blinkin anything). I m using a Beelink Ultimate GT1 (s912 3 gb) i m running 5.7.0-rc1-arm-64 bionic desktop Armbian_20.05.2_Arm-64_bionic_current_5.7.0-rc1_desktop_20200423 the dtb i use is gtx-200 if i recall good. It's like the eth0 it's been recognized (but not entirely) but even forcing a good IP it's not connecting/blinking. This is the sudo ethtool eth0 Settings for eth0: Supported ports: [TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: Yes Supported FEC modes: Not reported Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Advertised FEC modes: Not reported Speed: Unknown! Duplex: Unknown! (255) Port: MII PHYAD: 8 Transceiver: internal Auto-negotiation: on Supports Wake-on: ug Wake-on: d Current message level: 0x0000003f (63) dry probe link time ifdown ifup Link detected: no What should i do to make it work? Would be easier if i change the image? i try some but whenever i manage to make it run the eth0 (and wifi) doesn t work. Thanks for any suggestion.

sorry to bother you guys again. the 5.77 version works perfectly on the minix neo x8-h plus from the SD card, is there a way to cloning it to the native emmc of minix? could i use clonezilla to put the entire system inside the emmc? @balbes150 since the is not the nand-sata-install script is there a way to do it? thanks

Hi SteeMan My minix has that age, i tried to use the new packages but i have to use the img that works for my kernel (3.10) Just looking for a method to make the SD system works on my emmc Thanks

Hi I m using Armbian_5.77_Aml-s812_Ubuntu_bionic_default_3.10.108_desktop_20190326.img wich i don't know but i guess it could be a fork. Anyway i can't find any script (even in the /root folder) that can make me install the OS in the emmc . I always update and upgrade all the packages and check with root permissions. I even use the find command , but even the armlogic-config don't have the Install section Thanks

Hi Raptor Minix has a emmc storage of 16 GB wich i would like to use as the main OS Drive, is there a way to make the emmc storage the system drive with armbian? In that way i can boot armbian without using the SD Card. I tried the script of guides and tutorials but i can't find the command. Many thanks for the tips about the wifi, i m planning to use it only with wired connection, but i ll give it a look. Thanks

Thanks Raptor I try every single dtb files but i find another way: - Upgraded the Minix with the Lollipop version (not official but latest) - Did again what i did Right now i'm writing from the minix with the armbian on, and it's pretty amazing. It's booting from my SD Card and it works very good. I'm trying to install it on the ROM of the Minix (wich i guess is NAND) but i can't find the nand-sata-install script (command not found) or in the armbian-config (there is no such menù "Install") Is something that i could do? use the armbian OS from the minix drive without SD Card? I already update and upgrade the packages, i don't have wifi driver but i don't care honestly. Thanks for your help

Ok thanks but the dtb files are in 2 folders: dtb dtb-3.10.108 Wich folder should i get the dtb? for every single file in one of the 2 folders i will copy in the root folder of the SD renaming it to "dtb.img" Is that correct? Thank you again

Hi I download the 5.77 desktop one in the old folder (my minix is on kernel 3.10.33) copy in root folder and rename a couple of dtb files to the dtb.img name edit the uENV.ini just to be sure but now the minix simply don't have any external signal, the tv lose the signal like the minix power off. Do i need to try other dtb files and put in root folder (and rename them dtb.img) ? Thank you

Hi guys I made the config on the SD Card and the minix is correctly booting on it (without pressing any button) download 5.78 (the latest of the OLD folder) correct the uENV.ini pointing to the dtb of the minix copy the dtb of minix in the root folder All i can see on the TV after the android splash screen is first the noise tv screen for a moment, then it switch to one color. First boot was grey, after that orange, the third boot is now yellow. I repeat all with a new SD Card, same results. If i take off the SD the minix OS boot correctly. Should i check something? Thanks

Hi Raptor thanks for your answer, I tried to download 5.78 (the latest of the OLD folder) but i get the same error. I correct the uENV.ini pointing to the dtb of the minix but getting always the footer wrong error again. I even try to copy the dtb of minix in the root folder but nothing change. Is that because i m using a USB ? I m feeling that all writing images could have corrupted it Today i should get the brand new A1 SD Card so i would try those, but my USB is a good one. Maybe i could use his USB Burning Tool to put on the NAND directly the OS but i didn't find anything about it I can even connect to my minix via SSH if it helps (has Android 4.4.2 atm) Don't know what to do Thanks for your help

Hi guys I m sorry, i try to read all the pages and follow the instructions, but i m trying to make my minix neo x8-h plus to work with the aml_autoscript.zip I downloaded the brand new image updated yesterday 04/04 for the s812 Armbian_20.05.1_Aml-s812_bionic_current_5.6.0_20200404.img Flashed into a USB stick insert it into the minix usb boot it with the recovery button when ask to update with EXT it finds the aml.autoscript.zip but said Opening update package verifyng update package footer is wrong signature verification failed Installation aborted. I saw some posts, i download the boot.src file and put in the root of the usb but still same error. I try to copy the dbt image (try some of them) rename them to dtb.img and place them in the root but still same error What do you think i could do to make it boot with usb? Thanks in advantage. Nikeb