imrannaqvi83

Hi @balbes150, Sorry but i did not understand what you meant by "configure DTB". Do i suppose to create new (dtb) one? if its possible i an sure how. Or you are just referring to adding some settings in uEnv.txt. Thanks for your response.

Thanks @balbes150 After writing u-boot to boot partition, i tried few dtbs and able to boot from only /dtb/allwinner/sun50i-h6-pine-h64-model-b.dtb but initial setup drops to shell with error "alert lable:rootfs doesnot exist" I am not sure if i am using the correct versions of files, but only this combination boots at all. armbian-image: Armbian_20.05.0_Arm-64_buster_current_5.6.0-rc6_20200403.img u-boot:u-boot-allwinner-h6-tanix-tx6.img uEnv.txt: ---------- LINUX=/zImage INITRD=/uInitrd # aw h6 FDT=/dtb/allwinner/sun50i-h6-pine-h64-model-b.dtb APPEND=root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyS0,115200 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0

Hi @balbes150 Thanks for your quick reply, but sorry for my ignorance I did not understood that. I am on Windows 10 and using Win32DiskImager. After writing main armbian image there are two partitions on sd card. One is boot partitiin which is fat32 and other not visible in Windows. Writting uboot image will overwrite contents of boot partition. Is it suppose to be or I need some other program which will not overwrite boot partition? This is just my assumption, I did not tried. Will try that asap.

Hi Everyone, I have Sunvell Q Plus Allwinner H6 soc with 4GB/32GB, i am trying to install armbian (Armbian_20.05.0_Arm-64_buster_current_5.6.0-rc6_20200403.img.xz) from sd-card. One quirk about this device is that reset button doesnot work, its rooted and so i can go to shell and type su, reboot recovery to go to recovery but that is not much helpfull to me, or i don't know if it is useful. What i did so far. written Armbian_20.05.0_Arm-64_buster_current_5.6.0-rc6_20200403.img.xz to sdcard in windows 10 using Win32diskImager. From sd-card, removed .aw from all 4 allwinnder files with replaced existing files. updated uEnv.txt to use FDT=/dtb/allwinner/sun50i-h6-tanix-tx6.dtb APPEND=root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyS0,115200 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 Did not knew what is the procedure is to writing uboot files so just copied (u-boot-allwinner-h6-tanix-tx6.img) to sd-card as u-boot.ext But device is not booting from sd-card. Please let me know if you need some other information, i am not sure about step 4 but i don't know what to do next.