Everything posted by opfer15
Hi martinayotte, thanks for providing quick fix via device tree overlay. Also i am very happy to see we got Armbian and a much more recent kernel running on HK Odroid N2! Thx for all your hard work! Do we lack full support for overlays atm? Even if we do as described for allwiner based boards? 'Cause i tried to use "user_overlays" and "overlay" options in "ArmbianEnv.txt" as described here: https://docs.armbian.com/Hardware_Allwinner_overlays/ but couldn't get it to work. Just wanna know if i am missing something/ doing it wrong or It's known/intended /boot/armbianEnv.txt verbosity=1 user_overlays=odroid-n2-ic2@1c000 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u <= AutoAdded so file seems to be found adding the entries and copying the files myself didn't change anything. adding useroverlay via armbian-add-overlay => Overlays are supported only on A10... => Removing the allwiner sanity check from /usr/sbin/armbian-add-overlay line 38-41 edits armbianEnv.txt correctly by adding "user_overlays" option and copying the files to "/boot/overlay-user/" which seems be the desired location. But no pcf8563 modules are loaded after boot. I also tried adding the dtbo to /boot/dtb/overlay /boot/dtb/amlogic/overlays and so on. Your mentioned example rc.local works fine instead. mkdir /sys/kernel/config/device-tree/overlays/i2c3a cat /email@example.com > /sys/kernel/config/device-tree/overlays/i2c3a/dtbo systemctl stop ntp ntpd -qg systemctl start ntp hwclock --systohc -f /dev/rtc1 TIA
HW: Beecool M8S Pro L S912 3G 16G DDR3 LB Created sd card from latest arbian buster image with etcher and tried to boot it. Sadly the bootlogo keeps flickering. Updating via Stock Rom throws the error mentioned here: https://forum.armbian.com/topic/12988-armbian-for-amlogic-s905x3/?do=findComment&comment=94956 E:Map of '@/cache/recovery/block.map' failed E:failed to map file Installation aborted If i got the instructions right i dont need to dd a uboot image to sd-card. I adjusted uEnv.txt to use meson-gxm-q201 or 200 dtb but that didnt work. under android it shows me the following DTB-ID gxm-q20xrmii_3g any tips you could give me?
Wow thanks thats a leap forward in using armbian on the M8S Pro L S912 LB, as it quits with the same error. Thanks for your explanation and help. Could you also point out, on how to dump and reflash uboot env with root terminal,twrp or fastboot as far as i checked against /dev/block/env it is the same enviroment as in your u-boot