chess12

Validating
  • Content Count

    5
  • Joined

  • Last visited

  1. When l plug uart line,i find that my box pause at Uboot every time,so I try flash the three img files with dd if as you provided ,so it works.And I find that my box boots with no logo ,after 1-2 miniutes,it comes into armbian logo to start kernel.
  2. DDR version 1.16 20190713 ID:0xFFF In DDR3 333MHz Bus Width=32 Col=11 Bank=8 Row=16 CS=1 Die Bus-Width=16 Size=4096MB ddrconfig:3 OUT Boot1 Release Time: May 13 2019 17:34:36, version: 2.50 ChipType = 0x11, 233 mmc2:cmd19,100 SdmmcInit=2 0 BootCapSize=2000 UserCapSize=29820MB FwPartOffset=2000 , 2000 mmc0:cmd5,20 SdmmcInit=0 0 BootCapSize=0 UserCapSize=30040MB FwPartOffset=2000 , 0 StorageInit ok = 393537 Raw SecureMode = 0 SecureInit read PBA: 0x4 SecureInit read PBA: 0x404 SecureInit read PBA: 0x804 SecureInit read PBA: 0xc04 SecureInit rea
  3. hexdump,thank you for reply my question.I bought another X96Airbox,and installed Armbian in sdcard ,but I could not install Armbian in emmc ,this forum said this box is too new to support it,so I thougt of running Armbian in h96max to have a try.
  4. @hexdump,I have a h96max Rk3318 box 4+32GB,as you say, this tvbox could not boot from usb,I flash usb and sdcard from image of Armbian_20.02.0-rc1.038_Rk3328-tv_bionic_current_5.5.0-rc6_20200205.img,dd my as follows , dd if=./uboot-rk3318-h96max.img of=/dev/sdb seek=16384 conv=sync,fsync dd if=./trust.img of=/dev/sdb seek=24576 conv=sync,fsync rename uboot.sd to uboot.ext, and edit config in uEnv.txt # rk-3328 FDT=/dtb/rockchip/rk3318-h96max.dtb #FDT=/dtb/rockchip/rk3328-box.dtb #APPEND=root=LABEL=ROOTFS rootflags=data=writeback rw console=uart8250,mmio3