N3bi2

Hi it was probably me I tried to use linux on it and found armbian and i wanted to install it on internal memory using install script and it work until I formatted the memory: / its sounds not good because is hard to find stock rom for it you think this can help some how? http://openlinux.amlogic.com/Android/Mbox

Hi How to burn this on sdcard? ok i found the boot-xyz.dd file should be written (after a gunzip of course) via "dd if=boot-xyz.dd of=/dev/target-disk bs=512 seek=1 skip=1 status=progress" https://github.com/hexdump0815/u-boot-misc/releases/ i tried but noting hapend. uart output GXL:BL1:9ac50e:a1974b;FEAT:BDFC31BC;POC:3;RCY:0;EMMC:0;READ:0;CHK:AA;SD:0;READ:0;CHK:AA;USB:8; LOOP:1

I tried : -many different img -aml burning tool (1% always) -sd card burner this is output from uart to usb: GXL:BL1:9ac50e:a1974b;FEAT:BDFC31BC;POC:3;RCY:0;EMMC:0;READ:0;CHK:AA;SD:800;USB:8; LOOP:1;EMMC:0;READ:0;CHK:AA;SD:800;USB:8; LOOP:2;EMMC:0;READ:0;CHK:AA;SD:800;USB:8; mayby someone have img for this device? and can tell my how to fix this? board img: https://postimg.cc/zVPmdJ8G https://postimg.cc/142cMTbZ someone use librelec forum i cant add thread or ask anybody there?

my tv box mxq pro 4k s905x 2/16 p212 board: hnt-s905x v1.0 170519

hello now I definitely broke the box I used gpatred from os on sd card to clean internal memory but now i get only red light and tvbox doesn't want boot: / I assume that it was not the best idea and I just started to get to know that the world of arm works a bit differently than a normal PC I tried to use amilogic burning tool after connecting the usb, I see: connected success. but i stop on 1-2% and it throw error: 0x10103005 romcode / initialized ddr / download bufer read data item failed I read that it may be the fault of a weak cable (I will check if I have a different cabel) on linux I tried aml-flash-tool but when i start ./aml-flash i get Board is in secure mode I also saw that i can short pins to bypass nand / emmc memory but I don't know which pins. my nand / emmc chip is: samsung klmag2geac-b002 on other threads I read that after the nand memory format and need to use external programator to flash uboot? is there a chance to do something about it?

528/5000 Hello Tv box: mxqpor 4k s905x 2/16 p212 I used the script to install armbian on internal memory an and works partially because tv box boot from internal memory but without sd card the system does not start I deleted all files from the boot partition from desktop environment and now my tv box freez on amilogic logo. i have tried to rum armbian from android recovery using ext> sdcard> aml_autostart script but i get error cant find / misc! sd/block/mmcblk0 to /sdcard read only is there a way to fix it or do i need flash firmware?

Thank you very much for your answer and for explaining the differences between architectures. I've got a working armbian on this device in server / heedles version, and that's a good basis to build something on this device https://forum.armbian.com/topic/12162-single-armbian-image-for-rk-aml-aw-aarch64-armv8/ And in order to continue learning about the arm, as you said, I will look for RasberyPi or nano because it is better for this purpose at every point for my project I will probably buy some fanless miniPc / swith with normal Pc architecture Thank you and best regards

Hello i wanted to use tv box like hardware firewall like pfsense but found out that arm system is built for specific hardware so i thought i could install linux plus snort / suricata . the only dist that works on this box is armbian but using only firefox uses a lot of resources. my box is mxq pro 4k amilogic s905x now questions: 1.It is possible to modify / uninstall unnecessary things (programs / desktop environment theoretically everything can be installed and config from cmd / bash) in the future could create a web guide for more user-friendliness and transfer some of the load to another pc. 2. Could you tell me in short how the process of building a system for arm looks like in steps