Hello
I tried to let the 10 min boot run
But nothing happens, the log
U-Boot SPL 2020.10-armbian (Dec 12 2020 - 00:49:41 +0100)
DRAM: 1024 MiB
Trying to boot from MMC1
U-Boot 2020.10-armbian (Dec 12 2020 - 00:49:41 +0100) Allwinner Technology
CPU: Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi PC Plus
DRAM: 1 GiB
MMC: mmc @ 1c0f000: 0, mmc @ 1c10000: 2, mmc @ 1c11000: 1
Loading Environment from FAT ... *** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: phy interface0
eth0: ethernet @ 1c30000
230 454 bytes read in 15 ms (14.7 MiB / s)
starting USB ...
Usb bus @ 1c1a000: USB EHCI 1.00
Usb bus @ 1c1a400: USB OHCI 1.0
Usb bus @ 1c1b000: USB EHCI 1.00
Usb bus @ 1c1b400: USB OHCI 1.0
Usb bus @ 1c1c000: USB EHCI 1.00
Usb bus @ 1c1c400: USB OHCI 1.0
Usb bus @ 1c1d000: USB EHCI 1.00
Usb bus @ 1c1d400: USB OHCI 1.0
scanning bus usb @ 1c1a000 for devices ... 1 USB Device (s) found
scanning bus usb @ 1c1a400 for devices ... 1 USB Device (s) found
scanning bus usb @ 1c1b000 for devices ... 1 USB Device (s) found
scanning bus usb @ 1c1b400 for devices ... 1 USB Device (s) found
scanning bus usb @ 1c1c000 for devices ... 1 USB Device (s) found
scanning bus usb @ 1c1c400 for devices ... 1 USB Device (s) found
scanning bus usb @ 1c1d000 for devices ... 1 USB Device (s) found
scanning bus usb @ 1c1d400 for devices ... 1 USB Device (s) found
scanning usb for storage devices ... 0 Storage Device (s) found
Autoboot in 1 seconds, press <Space> to stop
switch to partitions # 0, OK
mmc0 is current device
Scanning mmc 0: 1 ...
Found U-Boot script /boot/boot.scr
3967 bytes read in 4 ms (967.8 KiB / s)
## Executing script at 43100000
U-boot loaded from SD
Boot script loaded from mmc
153 bytes read in 3 ms (49.8 KiB / s)
11434329 bytes read in 552 ms (19.8 MiB / s)
7808464 bytes read in 375 ms (19.9 MiB / s)
Found mainline kernel configuration
32636 bytes read in 10 ms (3.1 MiB / s)
4185 bytes read in 8 ms (510.7 KiB / s)
Applying kernel provided DT fixup script (sun8i-h3-fixup.scr)
## Executing script at 45000000
## Loading init Ramdisk from Legacy Image at 43300000 ...
Image Name: uInitrd
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 11434265 Bytes = 10.9 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
EHCI failed to shut down host controller.
Loading Ramdisk to 49518000, end 49fff919 ... OK
Loading Device Tree to 494a7000, end 49517fff ... OK
Starting kernel ...
without the SD card I tried to I tried to go through the Kernel, I don't have the science for that !!!!
Autoboot in 2 seconds, press <Space> to stop
=>
=> systemctl
Unknown command 'systemctl' - try 'help'
what to do
Thank you very much