Jump to content

Alsan Wong

Members
  • Posts

    6
  • Joined

  • Last visited

Recent Profile Visitors

922 profile views
  1. yes, it worked! adding kernel parameter is much simplier. thank you very much.
  2. I'm trying to recompile the image from source (because I want the kernel with SATA PMP support, and I got the SATA port multiplier and 3 drives ready), but failed in the last step. As the attached image, the problem should be caused by "Device or resource busy". I'm using a fresh downloaded Ubuntu 16.4 VB image and follow every instructions in github. So, how can I get rid of it? Am I missing something? Thanks.
  3. OK, confirmed to be the cabling problem. I've test not under 10 cables these days and finally got 3 of them worked. But I'm still can't understand why the cabel which can worked with the old image can't work now. Anyway, thanks everyone.
  4. for 1, that's acceptable answer. for 2, then why it can work while I go back to the old version?
  5. I've try to upgrade my pi to newest version of the system yesterday, but FAILED for both apt-get upgrade or by download and write the newest image. Here is my working log: 1. apt-upgrade from armbian 5.14 image - error message indicate there's error during the apt-get update process - reboot, the boot screen shows no bootup message, than begin the TFTP startup process - wait until TFTP timeout, the system halt. 2. download and write the newest **Armbian_5.20_Bananapipro_Ubuntu_xenial_4.7.3.7z** - can be startup with the boot screen, both power led and disk io led (green led) work as expected - system halt after a few second, the power led goes off - can power on the pi by long press the power button, but as same as the first boot, powered off a few seconds after power on - the message goes too fast, can't see what exact stage it reach Right now, I've to go back to the last working image (Armbian_5.14_Bananapipro_Ubuntu_xenial_4.6.2).
  6. Help please! I have a bp2 which was bought almost a year ago, and use Armbian_5.14_Bananapi_Debian_jessie_3.4.112.raw as the image for couple of months. Today, I'm try to upgrade to the Armbian_5.14_Bananapi_Ubuntu_xenial_4.6.2.raw image, but the pi can't boot at all. What I do to prepare the sdcard with the following procedure: 1. remote the old partitation, and create a new fat32 partitation 2. dd bs=1M if=Armbian_5.14_Bananapi_Ubuntu_xenial_4.6.2.raw of=/dev/sdc; and sync 3. mark the written partitation as bootable with fdisk ps: I'm using fish shell, and the syntax for the dd command is valid So, what's wrong with my steps? How can I troubleshoot? Thanks in advance.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines