Roman Pushenko

Hi, I completely discovered the interconnection when samba is not working. Sometimes samba works for me sometimes it doesn't, I changed sd card, hdd, sdd devices. but did not take into account the factor that sometimes I checked in ethernet port at a speed of 100mbit and 1000mbit, and 100% works with any 100mbit device, and does not work if the port is 1000mbit. Perhaps the kernel needs to update or fix the network card driver?

This is an incomprehensible problem for me. 1. I put the system on an SD card and connect an external hdd 320gb - the samba does not work 2. I put the system on an SSD via a SATA-USB adapter and I connect an external hard drive for 320 GB and the samba works. 3. I put the system on an SSD via a SATA-USB adapter and the samba works 4. I put the system on a 320GB hard drive via SATA to USB adapter and plug in a 1TB external hard drive and samba works. 5. I put the system on a 1TB hard drive via a SATA-USB adapter and the samba does not work On the options that samba does not work, at the start of the download, I see in htop how samba processes are started and immediately disappear. The processes that started at the start of the samba remain visible in htop

My problem is hardware. I disconnected the docking station with a hard drive and connected a regular ssd via a Chinese adapter and I was able to write at normal speed but not read. Then I took and instead of a SD card I wrote an image on this ssd disk. The system began to read and write through the samba, but sometimes the processes simply disappeared and everything related to the samba froze. I opened the tv box and added capacitors to the power system. But I still get a samba roll off at the time of reading. When measuring the input power, I received 5V, and at the USB output, 4.7-8V. The last thing I did, I tweaked the power supply to deliver 5.4V instead of the standard 5V. Now I have a USB 5.1-2B output and so far I do not see that the samba would hang.

hi i am using latest Armbian (kernel 5.11) on tvbox MXIII-plus. the system works and works very well. Armbian system on sdcard and connected usb hdd (power supply of the disk separately from the TV box). Mount disk and local work very well. Install the samba server and configure it. I can access the samba from the Windows machine, the directories are opened well, but if I start to read or write the file, a speed of 10-300kb / s appears and after some time a network error appears on the Windows machine. At the same time, the load of the TV box on the processor is minimal, the memory is occupied by 100MB of 2 gigabytes. I tried to log in from other machines, Linux, Android and Windows, the behavior is similar.