Jump to content

Scrooge69

Members
  • Posts

    7
  • Joined

  • Last visited

Everything posted by Scrooge69

  1. Hi Guys, First of all I totally forgot to Thank You all for doing this and Specially @balbes150 On my TV Box I have this chip for WiFi and Bluetooth RTL8723CS. Is it hard to add this to the image or maybe even Kernel, I am not so good in this part and I hope you understand what I mean I found this GitLab Thread, a little old though but maybe usefull. https://gitlab.com/TeeFirefly/linux-kernel Maybe you could point me in the right direction, Thanks.
  2. Hi Guys, I have installed below on my system: u-boot-rk3328-roc-pc.img Armbian_20.07_Rk3328-tv_buster_current_5.7.8.img.xz But I cannot get ETH or WiFi to work. I try nmtui to activate either ETH or WiFI but there is nothing to choose by. @maka I will try the other image you sent me as soon as I get Buster to work. Do I need to change anyhting anywhere when trying other images l below: Armbian_21.02.0-trunk_Arm-32_sid_current_5.10.6_xfce_desktop.img.xz Armbian_21.02.0-trunk_Station-m1_buster_legacy_4.4.213_xfce_desktop.img.xz IF so, which file and where? Thanks in Advance! Best Regards, Scrooge69
  3. Thanks maka, I have now got it to work with Both USB and SD Card, YaY Now I just need to learn how to deal with this, I am not so good with console typing, I want a desktop version. Is it possible to install that on this? I also want to get a log file for when it boots up so I can check that all is OK, how can I do that or maybe it is in the logs somewhere? Any good place where to go from here to config my TV Box, I know only basic Linux Can I just put that imgae on the USB (Replace the other one) and Boot up with it as it is now? https://yadi.sk/d/GnFmvx9A8ExVDw/ArmbianTV/20201229-legacy/Armbian_21.02.0-trunk_Station-m1_buster_legacy_4.4.213_xfce_desktop.img.xz?w=1 Thanks in Advance! Best Regards, Scrooge69
  4. Thank You maka, so Far :=) To install Armbian on My Android 8.1 TV Box 4GB+64GB Superpow MXQ Max Android Box Quad Core with BT4.1 3D/ 4k / 2.4Ghz WiFi / 100 LAN / H.265, HDMI Smart TV Box https://www.amazon.de/gp/product/B07GF9MM9S/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 I used BalenaEtcher to Flash Both images below. U-Boot to SD-Card at https://yadi.sk/d/_rQgn_FosYuW0g/U-BOOT/U-BOOT-ARMBIAN/20201004 u-boot-rk3328-roc-pc.img Armbian to USB at https://mega.nz/folder/zoZywCTQ#9sNfXIAB3m_DyLl5I8P94w/file/L4wCVQCQ Armbian_20.07_Rk3328-tv_buster_current_5.7.8.img.xz It seems I cannot boot when I have the USB stick with the SD card in the box, so I put in the SD card, hold down the reset button and then plugged in the power in the box, waited 30 secdonds, nothing happened, then I released the button and Linux system started to do a lot of stuff. I will try to do the same again and when Linux system do its stuff I plug in the USB quickly to see what happens. Can I put Both the Uboot and Armbian Image on the SD Card and if that works, what shall I change in any setting file if so? I apologise for all these questions, I have read through a lot of forums and I am so close now (I think)! Thanks in Advance! Best Regards, Scrooge69
  5. Thanks maka, I am just confused what I shall put on the SD card and what to put on the USB stick, which image on which device? Thanks in Advance. Best Regards, Scrooge69
  6. Hi SteeMan, Thank You! Yeah I guess this is outdated, I will check a little closer in this thread if I can find anything that helps me further. Once again Thanks SteeMan. Best Regards, Scrooge69
  7. Hi Guys, First of all I want to thank you all for the dedicated work you are doing. I have read around a lot in this thread but are a little confused about some things. I have this TV Box and wonder if I can flash it with Linux: https://www.amazon.de/gp/product/B07GF9MM9S/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 Android 8.1 TV Box 4GB+64GB Superpow MXQ Max Android Box Quad Core with BT4.1 3D/ 4k / 2.4Ghz WiFi / 100 LAN / H.265, HDMI Smart TV Box Brand: superpow It has RK3328 Chip. Can I follow the steps in the first Post? Which DTB should I use if it works? Any changes I should do in any setup files? Shall I flash an SD Card and an USB, if so whcih files to use? Thanks in Advance! Keep up the Great work! Best Regards, Scrooge69
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines