Daniel Cagarrinho
-
Posts
8 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by Daniel Cagarrinho
-
-
I have successfully connected wifi, but wen I reboot the box the os cannot start properly!!! I have followed the instructions from this topic
-
I need some help, did anyone get wifi working with tanix tx3??
what i can do to make it work???
-
On 1/30/2021 at 11:34 AM, Alexx said:
Hello Daniel,
go and download image from https://users.armbian.com/balbes150/arm-64/ . I had Armbian_20.10_Arm-64_bionic_current_5.9.0.img.xz and yesterday crashed my ssd and now i am trying Armbian_20.10_Arm-64_bullseye_current_5.9.0_desktop.img.xz . Both work ok. If you want you can try and the other images.
Then follow the instructions from the link below (from 2step)
https://forum.armbian.com/topic/12988-armbian-for-amlogic-s905x3/?do=findComment&comment=109829
For .dtb i am using the meson-sm1-sei610-ethfix.dtb from this post https://forum.armbian.com/topic/12988-armbian-for-amlogic-s905x3/?do=findComment&comment=108204 and it is ok.
Good luck
Hello Alexx, did you get wifi working with meson-sm1-sei610-ethfix.dtb??
Or it is necessary to do something else?
Once again tank you very much for your help, since you have helping me i have home assistant running perfectly :)
-
Anyone can put the vfd working normally??
Mine was stuck with the message “boot”
it is possible to put the clock back working??
-
-
Thanks a lot for the help!
the only problem I had was that it doesn't boot from the SD card, only via usb. now everything is working with home assistant. the only problem i have now is that i can only access the home assistant by ip and i can't through the url http://homeassistant.local:8123 or any internal url
-
Hello everyone,
I bought a tanix tx3 s905x3, and I would like to install armbian to use the home assistant, but I don't know how ...
Is it possible for someone to help me step by step?
I never did anything like that ...
thanks in advance
Armbian for Tanix TX3 Amlogic S905X3 with SP6330 WiFi/Bluetooth module
in Amlogic CPU Boxes
Posted
I boot using a USB stick, then I used the two commands :
```
sudo mv /lib/firmware/brcm/brcmfmac4330-sdio.txt /lib/firmware/brcm/brcmfmac4330-sdio.txt.old
sudo ln -s /lib/firmware/brcm/brcmfmac-ap6330-sdio.txt /lib/firmware/brcm/brcmfmac4330-sdio.txt
```
after that I entered in the armbian-config and managed to connect to a wifi network, then restarted the box and no longer be able to boot armbian!
Conclusion this two commands turn possible the usage of wifi, but somehow causes a problem removing the ability to boot the system after the change!!!
Ps: I just can post 1 time a day here!