Ruf73

@balbes150, can you help me in this question?

Friends, I need a module 8021q.ko for kernel 3.10.108 Please post it from anyone!

@balbes150, good day! I ran Armbian_5.77_Aml-s812_Debian_stretch_default_3.10.108_20190326.img from the SD card, then copied it to nand. However, there was a problem. When I boot from the SD card, the system did not start without an hdmi cable until I removed the parameter "logo=osd1,loaded,0x15100000,1080p,full" from the uEnv.ini. It was in this configuration that I copied the system to nand. But when the system starts from nand, in the Kernel command line I again see the logo parameter! And the system does not start without a hdmi cable. How do I edit the Kernel command line? upd: solved the problem myself, thanks for the silence

@SteeMan, @RaptorSDS thanks to you it became much clearer. So, I have nand (I see "detect NAND device: E revision 1Ynm NAND 8GiB H27UCG8T2E" in the dmesg logs) and I stay on the 3.10 kernel if it allows booting from nand. I do not see the installation script for nand on build 5.77. Does this mean that I need to go back to build 5.44 (I think I saw the script there) or can I take the script from 5.44 and copy 5.77? p.s. on 5.77 I managed to boot without hdmi, and not on 5.44. Although I may have tried little))

it seems so )) ok, but how to run the 5.7 kernel on this tv box? dtb files from the SD card also do not work upd: it will probably be important to say that I want to transfer armbian to the nand memory of the device. What image is right for this?

@RaptorSDS, but dtb from SD-card don't work, i tried them all. What should I do next?

@RaptorSDS thanks for the comments! I extracted dtb file from android and was surprised that it is called m8m2_n200_1G.dtb. I remind you that android sees 2GB of memory, see "dmesg — kitkat.txt" With this dtb file, the Armbian_5.77_Aml-s812_Debian_stretch_default_3.10.108_20190326.img.xz is launched, but it only sees 1GB of memory: "dmesg_3_10 — 5.77.txt" DTS files also attached (thanx to) Have ideas how to make armbian memory see? dmesg — kitkat.txt dmesg_3_10 — 5.77.txt 02_dtbdump_m8m2_n200_1G.dts

Multiboot is activated. I was able to run Armbian_5.44_S812_Debian_stretch_3.10.108_server_20180521.img.xz without making any changes to the SD card. Other images: - Armbian_5.77_Aml-s812_Debian_stretch_default_3.10.108_20190326.img.xz, - Armbian_5.77_Aml-s812_Debian_stretch_dev_5.1.0-rc2_20190326.img.xz, - Armbian_20.05.3_Aml-s812_buster_current_5.7.0-rc3-gbec4f4648-dirty_20200427.img.xz do not start - a screen with dots, the router shows the port is up, there is no data exchange, nothing happens. I tried to use different dtb files (meson8 ..) - no image starts, including the first. Problems with 5.44 : - does not start without HDMI cable - does not see all the memory: root@vegas812:~# free total used free shared buff/cache available Mem: 834456 53212 670868 13496 110376 756756 Swap: 131068 0 131068 should be 2Gb, a photo of the board. Output of dmesg here. How do I run a more recent image? How to make the memory see? What can I do to start without HDMI connected? Thanks in advance for your answers!

Good day to all! I have a TV Box M8 S802 K200, I tried to launch Armbian on it (from here https://disk.yandex.ru/d/wc2jqGsHuKy48), but unsuccessfully. If someone can flash a box for a fee, please write to me. I am ready to send the box by mail for this in Russia.