Hoangtnt Nguyen

  • Posts

    10
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Hoangtnt Nguyen's Achievements

  1. i tried but still failed. thx. i think just use with wifi dongle and ethernet is ok.
  2. yes, i removed wlan-esp8089 overlay from /boot/armbianEnv.txt. I notice when it boot 1st when i type rk322x-config. it show: Wifi Device: not available
  3. i changed value in /etc/modprobe.d/esp8089.conf to 1 then reboot but nothing change [ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.4.194-rk322x (root@armbianbuild) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36)) ) #23 SMP Sun Apr 25 08:23:48 UTC 2021 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Generic RK322x TV Box board [ 0.000000] cma: Reserved 16 MiB at 0x9f000000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 253952 [ 0.000000] free_area_init_node: node 0, pgdat b1253b40, node_mem_map ee6f1000 [ 0.000000] Normal zone: 2304 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 253952 pages, LIFO batch:31 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.0 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] PERCPU: Embedded 14 pages/cpu @ee68f000 s24856 r8192 d24296 u57344 [ 0.000000] pcpu-alloc: s24856 r8192 d24296 u57344 alloc=14*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 251648 [ 0.000000] Kernel command line: earlyprintk root=UUID=c0c5bb98-92be-493c-877d-d3be49b2c66f console=ttyS2,115200n8 console=tty1 rootwait rootfstype=ext4 consoleblank=0 loglevel=1 ubootpart=4c420d14-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u coherent_pool=2M cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 963660K/1015808K available (12862K kernel code, 919K rwdata, 3240K rodata, 808K init, 1219K bss, 35764K reserved, 16384K cma-reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) lowmem : 0xb0000000 - 0xf0000000 (1024 MB) pkmap : 0xafe00000 - 0xb0000000 ( 2 MB) modules : 0xaf000000 - 0xafe00000 ( 14 MB) .text : 0xb0008000 - 0xb0c97c6c (12864 kB) .init : 0xb10b0000 - 0xb117a000 ( 808 kB) .data : 0xb117a000 - 0xb125fe94 ( 920 kB) .bss : 0xb1261000 - 0xb1391f14 (1220 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000024] Switching to timer-based delay loop, resolution 41ns [ 0.001893] Console: colour dummy device 80x30 [ 0.002082] console [tty1] enabled [ 0.002113] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.002134] pid_max: default: 32768 minimum: 301 [ 0.002288] Security Framework initialized [ 0.002304] Yama: becoming mindful. [ 0.002393] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002410] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003453] Initializing cgroup subsys io [ 0.003496] Initializing cgroup subsys memory [ 0.003548] Initializing cgroup subsys devices [ 0.003571] Initializing cgroup subsys freezer [ 0.003592] Initializing cgroup subsys net_cls [ 0.003705] Initializing cgroup subsys perf_event [ 0.003731] Initializing cgroup subsys net_prio [ 0.003775] Initializing cgroup subsys pids [ 0.003865] CPU: Testing write buffer coherency: ok [ 0.003929] ftrace: allocating 41892 entries in 123 pages [ 0.087980] /cpus/cpu@f00 missing clock-frequency property [ 0.088024] /cpus/cpu@f01 missing clock-frequency property [ 0.088045] /cpus/cpu@f02 missing clock-frequency property [ 0.088065] /cpus/cpu@f03 missing clock-frequency property [ 0.088079] CPU0: update cpu_capacity 430 [ 0.088091] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [ 0.088202] Setting up static identity map for 0x60008280 - 0x600082d8 [ 0.100466] CPU1: update cpu_capacity 430 [ 0.100477] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [ 0.110440] CPU2: update cpu_capacity 430 [ 0.110449] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 [ 0.120491] CPU3: update cpu_capacity 430 [ 0.120500] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 [ 0.120672] Brought up 4 CPUs [ 0.120717] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 0.120726] CPU: All CPU(s) started in SVC mode. [ 0.122500] devtmpfs: initialized [ 0.143263] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.143992] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.144043] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.145687] xor: measuring software checksum speed [ 0.184045] arm4regs : 1011.000 MB/sec [ 0.224148] 8regs : 705.000 MB/sec [ 0.264253] 32regs : 684.000 MB/sec [ 0.304356] neon : 1018.000 MB/sec [ 0.304367] xor: using function: neon (1018.000 MB/sec) [ 0.304417] pinctrl core: initialized pinctrl subsystem [ 0.306289] NET: Registered protocol family 16 [ 0.309098] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.320569] cpuidle: using governor ladder [ 0.332579] cpuidle: using governor menu [ 0.349827] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio0 [ 0.350001] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio1 [ 0.350158] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio2 [ 0.350337] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio3 [ 0.356937] console [pstore-1] enabled [ 0.356951] pstore: Registered ramoops as persistent store backend [ 0.356963] ramoops: attached 0xf0000@0x62e00000, ecc: 0/0 [ 0.360370] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.360395] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.360661] sip_firmware_init: set rockchip sip version v2 failed [ 0.457778] raid6: int32x1 gen() 133 MB/s [ 0.525797] raid6: int32x1 xor() 131 MB/s [ 0.593997] raid6: int32x2 gen() 166 MB/s [ 0.662225] raid6: int32x2 xor() 137 MB/s [ 0.730397] raid6: int32x4 gen() 163 MB/s [ 0.798504] raid6: int32x4 xor() 136 MB/s [ 0.866808] raid6: int32x8 gen() 166 MB/s [ 0.935058] raid6: int32x8 xor() 113 MB/s [ 1.003198] raid6: neonx1 gen() 382 MB/s [ 1.071310] raid6: neonx1 xor() 290 MB/s [ 1.139545] raid6: neonx2 gen() 519 MB/s [ 1.207675] raid6: neonx2 xor() 376 MB/s [ 1.275945] raid6: neonx4 gen() 581 MB/s [ 1.344109] raid6: neonx4 xor() 400 MB/s [ 1.412389] raid6: neonx8 gen() 559 MB/s [ 1.480570] raid6: neonx8 xor() 391 MB/s [ 1.480583] raid6: using algorithm neonx4 gen() 581 MB/s [ 1.480593] raid6: .... xor() 400 MB/s, rmw enabled [ 1.480604] raid6: using intx1 recovery algorithm [ 1.481795] rockchip-pm rockchip-suspend: not set wakeup-config [ 1.481822] rockchip-pm rockchip-suspend: not set pwm-regulator-config [ 1.482226] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulators/regulator@0[0]' [ 1.482798] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/regulators/regulator@1[0]' [ 1.483550] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-host-regulator[0]' - status (0) [ 1.484232] of_get_named_gpiod_flags: parsed 'gpio' property of node '/otg-vbus-regulator[0]' - status (0) [ 1.484887] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-phy-regulator[0]' [ 1.485857] iommu: Adding device 20020000.vpu-service to group 0 [ 1.485977] iommu: Adding device 20030000.rkvdec to group 1 [ 1.486095] iommu: Adding device 20050000.vop to group 2 [ 1.486194] iommu: Adding device 20070000.iep to group 3 [ 1.486816] rk_iommu 20020800.iommu: can't get sclk [ 1.487574] rk_iommu 20030480.iommu: can't get sclk [ 1.487871] rk_iommu 20053f00.iommu: can't get sclk [ 1.488033] rk_iommu 20070800.iommu: can't get aclk [ 1.488052] rk_iommu 20070800.iommu: can't get hclk [ 1.488070] rk_iommu 20070800.iommu: can't get sclk [ 1.489072] SCSI subsystem initialized [ 1.489547] usbcore: registered new interface driver usbfs [ 1.489652] usbcore: registered new interface driver hub [ 1.489797] usbcore: registered new device driver usb [ 1.490035] media: Linux media interface: v0.10 [ 1.490140] Linux video capture interface: v2.00 [ 1.490412] pps_core: LinuxPPS API ver. 1 registered [ 1.490429] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 1.490475] PTP clock support registered [ 1.492742] Advanced Linux Sound Architecture Driver Initialized. [ 1.493870] Bluetooth: Core ver 2.21 [ 1.493956] NET: Registered protocol family 31 [ 1.493972] Bluetooth: HCI device and connection manager initialized [ 1.493998] Bluetooth: HCI socket layer initialized [ 1.494016] Bluetooth: L2CAP socket layer initialized [ 1.494079] Bluetooth: SCO socket layer initialized [ 1.495075] NetLabel: Initializing [ 1.495102] NetLabel: domain hash size = 128 [ 1.495112] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.495200] NetLabel: unlabeled traffic allowed by default [ 1.496813] clocksource: Switched to clocksource arch_sys_counter [ 1.601561] NET: Registered protocol family 2 [ 1.602614] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 1.602742] TCP bind hash table entries: 8192 (order: 5, 163840 bytes) [ 1.603100] TCP: Hash tables configured (established 8192 bind 8192) [ 1.603216] UDP hash table entries: 512 (order: 2, 24576 bytes) [ 1.603286] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes) [ 1.603686] NET: Registered protocol family 1 [ 1.604580] RPC: Registered named UNIX socket transport module. [ 1.604613] RPC: Registered udp transport module. [ 1.604625] RPC: Registered tcp transport module. [ 1.604635] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.605139] Trying to unpack rootfs image as initramfs... [ 1.944881] Freeing initrd memory: 4568K [ 1.946065] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 1.949437] Initialise system trusted keyring [ 1.963958] VFS: Disk quotas dquot_6.6.0 [ 1.964300] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.967330] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.971126] NFS: Registering the id_resolver key type [ 1.971221] Key type id_resolver registered [ 1.971234] Key type id_legacy registered [ 1.971273] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.971395] ntfs: driver 2.1.32 [Flags: R/W]. [ 1.972396] JFS: nTxBlock = 7692, nTxLock = 61538 [ 1.985467] SGI XFS with security attributes, no debug enabled [ 1.995264] NET: Registered protocol family 38 [ 1.995328] Key type asymmetric registered [ 1.995351] Asymmetric key parser 'x509' registered [ 1.995803] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 1.996273] io scheduler noop registered [ 1.996307] io scheduler deadline registered [ 1.996410] io scheduler cfq registered (default) [ 2.000275] phy phy-11000000.syscon:usb2-phy@800.2: Failed to get VBUS supply regulator [ 2.006119] rk-vcodec 20020000.vpu-service: no regulator for vcodec [ 2.006728] rk-vcodec 20020000.vpu-service: probe device [ 2.007245] rk-vcodec 20020000.vpu-service: drm allocator with mmu enabled [ 2.008821] rk-vcodec 20020000.vpu-service: could not find power_model node [ 2.008861] rk-vcodec 20020000.vpu-service: init success [ 2.009291] rk-vcodec 20030000.rkvdec: vcodec regulator not ready, retry [ 2.013864] dma-pl330 110f0000.pdma: Loaded driver for PL330 DMAC-241330 [ 2.013899] dma-pl330 110f0000.pdma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 [ 2.015172] rockchip-system-monitor rockchip-system-monitor: system monitor probe [ 2.015694] pwm-regulator vdd-arm-regulator: GPIO lookup for consumer enable [ 2.015715] pwm-regulator vdd-arm-regulator: using device tree for GPIO lookup [ 2.015734] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-arm-regulator[0]' [ 2.015750] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-arm-regulator[0]' [ 2.015764] pwm-regulator vdd-arm-regulator: using lookup tables for GPIO lookup [ 2.015780] pwm-regulator vdd-arm-regulator: lookup for GPIO enable failed [ 2.016544] pwm-regulator vdd-log-regulator: GPIO lookup for consumer enable [ 2.016570] pwm-regulator vdd-log-regulator: using device tree for GPIO lookup [ 2.016587] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-log-regulator[0]' [ 2.016602] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-log-regulator[0]' [ 2.016616] pwm-regulator vdd-log-regulator: using lookup tables for GPIO lookup [ 2.016631] pwm-regulator vdd-log-regulator: lookup for GPIO enable failed [ 2.018034] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.019006] 11030000.serial: ttyS2 at MMIO 0x11030000 (irq = 30, base_baud = 1500000) is a 16550A [ 2.019878] console [ttyS2] enabled [ 2.022010] [drm] Initialized drm 1.1.0 20060810 [ 2.024634] [drm] Rockchip DRM driver version: v1.0.1 [ 2.025040] rockchip-drm display-subsystem: devfreq is not set [ 2.025920] rockchip-drm display-subsystem: bound 20050000.vop (ops 0xb0d1b2b0) [ 2.026406] i2c i2c-0: of_i2c: modalias failure on /hdmi@200a0000/ports [ 2.026439] dwhdmi-rockchip 200a0000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.026567] dwhdmi-rockchip 200a0000.hdmi: Detected HDMI TX controller v2.01a with HDCP (inno_dw_hdmi_phy) [ 2.028078] rockchip-drm display-subsystem: bound 200a0000.hdmi (ops 0xb0d13808) [ 2.028112] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.028123] [drm] No driver support for vblank timestamp query. [ 2.028296] rockchip-drm display-subsystem: failed to parse display resources [ 2.028377] rockchip-drm display-subsystem: No connectors reported connected with modes [ 2.028490] [drm] Cannot find any crtc or sizes - going 1024x768 [ 2.051860] Console: switching to colour frame buffer device 128x48 [ 2.067342] rockchip-drm display-subsystem: fb0: frame buffer device [ 2.081910] Registered IR keymap rc-cec [ 2.082189] rc rc0: RC for dw_hdmi as /devices/platform/200a0000.hdmi/rc/rc0 [ 2.082877] input: RC for dw_hdmi as /devices/platform/200a0000.hdmi/rc/rc0/input0 [ 2.085460] brd: module loaded [ 2.098328] loop: module loaded [ 2.098421] lkdtm: No crash points registered, enable through debugfs [ 2.101332] libphy: Fixed MDIO Bus: probed [ 2.101371] tun: Universal TUN/TAP device driver, 1.6 [ 2.101384] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 2.101797] CAN device driver interface [ 2.103458] rk_gmac-dwmac 30200000.ethernet: clock input or output? (output). [ 2.103494] rk_gmac-dwmac 30200000.ethernet: TX delay(0x30). [ 2.103511] rk_gmac-dwmac 30200000.ethernet: RX delay(0x10). [ 2.103560] rk_gmac-dwmac 30200000.ethernet: integrated PHY? (yes). [ 2.103740] rk_gmac-dwmac 30200000.ethernet: cannot get clock clk_mac_speed [ 2.108828] rk_gmac-dwmac 30200000.ethernet: init for RMII [ 2.144886] stmmac - user ID: 0x10, Synopsys ID: 0x35 [ 2.144906] Ring mode enabled [ 2.144918] DMA HW capability register supported [ 2.144929] Normal descriptors [ 2.144942] RX Checksum Offload Engine supported (type 2) [ 2.144951] TX Checksum insertion supported [ 2.144960] Wake-Up On Lan supported [ 2.145067] rk_gmac-dwmac 30200000.ethernet: rk_get_eth_addr: mac address: 9e:82:a9:62:b7:35 [ 2.145082] eth%d: device MAC address 9e:82:a9:62:b7:35 [ 2.145093] Enable RX Mitigation via HW Watchdog Timer [ 2.145320] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/ethernet@30200000[0]' - status (0) [ 2.621710] libphy: stmmac: probed [ 2.621749] eth%d: PHY ID 1234d400 at 0 IRQ POLL (stmmac-0:00) active [ 2.621765] eth%d: PHY ID 00000000 at 1 IRQ POLL (stmmac-0:01) [ 2.621778] eth%d: PHY ID 00000000 at 2 IRQ POLL (stmmac-0:02) [ 2.621791] eth%d: PHY ID 00000000 at 3 IRQ POLL (stmmac-0:03) [ 2.621804] eth%d: PHY ID 00000000 at 4 IRQ POLL (stmmac-0:04) [ 2.621816] eth%d: PHY ID 00000000 at 5 IRQ POLL (stmmac-0:05) [ 2.621829] eth%d: PHY ID 00000000 at 6 IRQ POLL (stmmac-0:06) [ 2.621842] eth%d: PHY ID 00000000 at 7 IRQ POLL (stmmac-0:07) [ 2.621855] eth%d: PHY ID 00000000 at 8 IRQ POLL (stmmac-0:08) [ 2.621867] eth%d: PHY ID 00000000 at 9 IRQ POLL (stmmac-0:09) [ 2.621880] eth%d: PHY ID 00000000 at 10 IRQ POLL (stmmac-0:0a) [ 2.621893] eth%d: PHY ID 00000000 at 11 IRQ POLL (stmmac-0:0b) [ 2.621906] eth%d: PHY ID 00000000 at 12 IRQ POLL (stmmac-0:0c) [ 2.621919] eth%d: PHY ID 00000000 at 13 IRQ POLL (stmmac-0:0d) [ 2.621932] eth%d: PHY ID 00000000 at 14 IRQ POLL (stmmac-0:0e) [ 2.621945] eth%d: PHY ID 00000000 at 15 IRQ POLL (stmmac-0:0f) [ 2.621957] eth%d: PHY ID 00000000 at 16 IRQ POLL (stmmac-0:10) [ 2.621971] eth%d: PHY ID 00000000 at 17 IRQ POLL (stmmac-0:11) [ 2.621984] eth%d: PHY ID 00000000 at 18 IRQ POLL (stmmac-0:12) [ 2.621996] eth%d: PHY ID 00000000 at 19 IRQ POLL (stmmac-0:13) [ 2.622010] eth%d: PHY ID 00000000 at 20 IRQ POLL (stmmac-0:14) [ 2.622022] eth%d: PHY ID 00000000 at 21 IRQ POLL (stmmac-0:15) [ 2.622035] eth%d: PHY ID 00000000 at 22 IRQ POLL (stmmac-0:16) [ 2.622048] eth%d: PHY ID 00000000 at 23 IRQ POLL (stmmac-0:17) [ 2.622061] eth%d: PHY ID 00000000 at 24 IRQ POLL (stmmac-0:18) [ 2.622074] eth%d: PHY ID 00000000 at 25 IRQ POLL (stmmac-0:19) [ 2.622086] eth%d: PHY ID 00000000 at 26 IRQ POLL (stmmac-0:1a) [ 2.622099] eth%d: PHY ID 00000000 at 27 IRQ POLL (stmmac-0:1b) [ 2.622112] eth%d: PHY ID 00000000 at 28 IRQ POLL (stmmac-0:1c) [ 2.622125] eth%d: PHY ID 00000000 at 29 IRQ POLL (stmmac-0:1d) [ 2.622137] eth%d: PHY ID 00000000 at 30 IRQ POLL (stmmac-0:1e) [ 2.622149] eth%d: PHY ID 00000000 at 31 IRQ POLL (stmmac-0:1f) [ 2.623762] PPP generic driver version 2.4.2 [ 2.624299] Atmel at76x USB Wireless LAN Driver 0.17 loading [ 2.624470] usbcore: registered new interface driver at76c50x-usb [ 2.624619] usbcore: registered new interface driver rtl8187 [ 2.624832] usbcore: registered new interface driver rndis_wlan [ 2.624962] usbcore: registered new interface driver zd1201 [ 2.625483] usbcore: registered new interface driver rt2800usb [ 2.625639] Rockchip WiFi SYS interface (V1.00) ... [ 2.625717] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 2.625818] usbcore: registered new interface driver pegasus [ 2.625907] usbcore: registered new interface driver rtl8150 [ 2.625993] usbcore: registered new interface driver r8152 [ 2.626095] usbcore: registered new interface driver asix [ 2.626179] usbcore: registered new interface driver ax88179_178a [ 2.626261] usbcore: registered new interface driver cdc_ether [ 2.626343] usbcore: registered new interface driver dm9601 [ 2.626460] usbcore: registered new interface driver smsc75xx [ 2.626571] usbcore: registered new interface driver smsc95xx [ 2.626656] usbcore: registered new interface driver net1080 [ 2.626741] usbcore: registered new interface driver rndis_host [ 2.626853] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 2.627007] usbcore: registered new interface driver cdc_ncm [ 2.627095] usbcore: registered new interface driver cdc_mbim [ 2.627694] 30040000.usb supply vusb_d not found, using dummy regulator [ 2.627853] 30040000.usb supply vusb_a not found, using dummy regulator [ 2.641365] dwc2 30040000.usb: DWC OTG Controller [ 2.641428] dwc2 30040000.usb: new USB bus registered, assigned bus number 1 [ 2.641499] dwc2 30040000.usb: irq 48, io mem 0x30040000 [ 2.641911] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.641932] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.641948] usb usb1: Product: DWC OTG Controller [ 2.641962] usb usb1: Manufacturer: Linux 4.4.194-rk322x dwc2_hsotg [ 2.641977] usb usb1: SerialNumber: 30040000.usb [ 2.643184] hub 1-0:1.0: USB hub found [ 2.643276] hub 1-0:1.0: 1 port detected [ 2.645134] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.645170] ehci-platform: EHCI generic platform driver [ 2.647842] ehci-platform 30080000.usb: EHCI Host Controller [ 2.648315] ehci-platform 30080000.usb: new USB bus registered, assigned bus number 2 [ 2.648711] ehci-platform 30080000.usb: irq 49, io mem 0x30080000 [ 2.660777] ehci-platform 30080000.usb: USB 2.0 started, EHCI 1.00 [ 2.661122] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.661143] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.661159] usb usb2: Product: EHCI Host Controller [ 2.661173] usb usb2: Manufacturer: Linux 4.4.194-rk322x ehci_hcd [ 2.661187] usb usb2: SerialNumber: 30080000.usb [ 2.662324] hub 2-0:1.0: USB hub found [ 2.662419] hub 2-0:1.0: 1 port detected [ 2.665479] ehci-platform 300c0000.usb: EHCI Host Controller [ 2.665976] ehci-platform 300c0000.usb: new USB bus registered, assigned bus number 3 [ 2.666334] ehci-platform 300c0000.usb: irq 51, io mem 0x300c0000 [ 2.676785] ehci-platform 300c0000.usb: USB 2.0 started, EHCI 1.00 [ 2.677123] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.677143] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.677158] usb usb3: Product: EHCI Host Controller [ 2.677172] usb usb3: Manufacturer: Linux 4.4.194-rk322x ehci_hcd [ 2.677186] usb usb3: SerialNumber: 300c0000.usb [ 2.678323] hub 3-0:1.0: USB hub found [ 2.678405] hub 3-0:1.0: 1 port detected [ 2.681444] ehci-platform 30100000.usb: EHCI Host Controller [ 2.681899] ehci-platform 30100000.usb: new USB bus registered, assigned bus number 4 [ 2.682269] ehci-platform 30100000.usb: irq 53, io mem 0x30100000 [ 2.692787] ehci-platform 30100000.usb: USB 2.0 started, EHCI 1.00 [ 2.693155] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.693176] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.693191] usb usb4: Product: EHCI Host Controller [ 2.693205] usb usb4: Manufacturer: Linux 4.4.194-rk322x ehci_hcd [ 2.693219] usb usb4: SerialNumber: 30100000.usb [ 2.694323] hub 4-0:1.0: USB hub found [ 2.694408] hub 4-0:1.0: 1 port detected [ 2.695296] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.695354] ohci-platform: OHCI generic platform driver [ 2.695870] ohci-platform 300a0000.usb: Generic Platform OHCI controller [ 2.696354] ohci-platform 300a0000.usb: new USB bus registered, assigned bus number 5 [ 2.696693] ohci-platform 300a0000.usb: irq 50, io mem 0x300a0000 [ 2.757066] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.757093] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.757108] usb usb5: Product: Generic Platform OHCI controller [ 2.757123] usb usb5: Manufacturer: Linux 4.4.194-rk322x ohci_hcd [ 2.757137] usb usb5: SerialNumber: 300a0000.usb [ 2.758288] hub 5-0:1.0: USB hub found [ 2.758376] hub 5-0:1.0: 1 port detected [ 2.759323] ohci-platform 300e0000.usb: Generic Platform OHCI controller [ 2.759782] ohci-platform 300e0000.usb: new USB bus registered, assigned bus number 6 [ 2.760138] ohci-platform 300e0000.usb: irq 52, io mem 0x300e0000 [ 2.817056] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.817085] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.817101] usb usb6: Product: Generic Platform OHCI controller [ 2.817115] usb usb6: Manufacturer: Linux 4.4.194-rk322x ohci_hcd [ 2.817129] usb usb6: SerialNumber: 300e0000.usb [ 2.818230] hub 6-0:1.0: USB hub found [ 2.818309] hub 6-0:1.0: 1 port detected [ 2.819243] ohci-platform 30120000.usb: Generic Platform OHCI controller [ 2.819700] ohci-platform 30120000.usb: new USB bus registered, assigned bus number 7 [ 2.820037] ohci-platform 30120000.usb: irq 54, io mem 0x30120000 [ 2.877106] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.877137] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.877153] usb usb7: Product: Generic Platform OHCI controller [ 2.877167] usb usb7: Manufacturer: Linux 4.4.194-rk322x ohci_hcd [ 2.877181] usb usb7: SerialNumber: 30120000.usb [ 2.878347] hub 7-0:1.0: USB hub found [ 2.878458] hub 7-0:1.0: 1 port detected [ 2.879520] usbcore: registered new interface driver cdc_acm [ 2.879540] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 2.879657] usbcore: registered new interface driver cdc_wdm [ 2.879964] usbcore: registered new interface driver usb-storage [ 2.880147] usbcore: registered new interface driver usbserial [ 2.880230] usbcore: registered new interface driver usbserial_generic [ 2.880297] usbserial: USB Serial support registered for generic [ 2.880432] usbcore: registered new interface driver keyspan [ 2.880499] usbserial: USB Serial support registered for Keyspan - (without firmware) [ 2.880559] usbserial: USB Serial support registered for Keyspan 1 port adapter [ 2.880618] usbserial: USB Serial support registered for Keyspan 2 port adapter [ 2.880677] usbserial: USB Serial support registered for Keyspan 4 port adapter [ 2.880909] usbcore: registered new interface driver option [ 2.880985] usbserial: USB Serial support registered for GSM modem (1-port) [ 2.881692] usbcore: registered new interface driver oti6858 [ 2.881761] usbserial: USB Serial support registered for oti6858 [ 2.881865] usbcore: registered new interface driver qcserial [ 2.881928] usbserial: USB Serial support registered for Qualcomm USB modem [ 2.882114] usbcore: registered new interface driver sierra [ 2.882177] usbserial: USB Serial support registered for Sierra USB modem [ 2.883981] usbcore: registered new interface driver iforce [ 2.884160] usbcore: registered new interface driver xpad [ 2.884484] usbcore: registered new interface driver usbtouchscreen [ 2.885910] i2c /dev entries driver [ 2.887969] IR NEC protocol handler initialized [ 2.888000] IR RC5(x/sz) protocol handler initialized [ 2.888018] IR RC6 protocol handler initialized [ 2.888035] IR JVC protocol handler initialized [ 2.888053] IR Sony protocol handler initialized [ 2.888071] IR SANYO protocol handler initialized [ 2.888088] IR Sharp protocol handler initialized [ 2.888106] IR MCE Keyboard/mouse protocol handler initialized [ 2.888123] IR XMP protocol handler initialized [ 2.890052] usbcore: registered new interface driver uvcvideo [ 2.890074] USB Video Class driver (1.1.1) [ 2.892155] Boot mode: normal [ 2.893602] rockchip-thermal 11150000.tsadc: tsadc is probed successfully! [ 2.895591] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 2.896036] Bluetooth: Virtual HCI driver ver 1.5 [ 2.896366] Bluetooth: HCI UART driver ver 2.3 [ 2.896387] Bluetooth: HCI UART protocol H4 registered [ 2.896399] Bluetooth: HCI UART protocol LL registered [ 2.896410] Bluetooth: HCI UART protocol ATH3K registered [ 2.896421] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 2.896625] Bluetooth: HCI UART protocol BCM registered [ 2.896897] usbcore: registered new interface driver bfusb [ 2.897060] usbcore: registered new interface driver btusb [ 2.897084] Bluetooth: Generic Bluetooth SDIO driver ver 0.1 [ 2.897813] cpu cpu0: leakage=5 [ 2.897850] cpu cpu0: leakage-volt-sel=0 [ 2.898086] cpu cpu0: Failed to get pvtm [ 2.899705] cpu cpu0: avs=0 [ 2.899799] cpu cpu0: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 [ 2.899826] cpu cpu0: failed to read out thermal zone (-22) [ 2.900596] cpu cpu0: failed to find power_model node [ 2.901593] pwrseq_simple sdio-pwrseq: GPIO lookup for consumer reset [ 2.901621] pwrseq_simple sdio-pwrseq: using device tree for GPIO lookup [ 2.901647] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio-pwrseq[0]' - status (0) [ 2.902071] Synopsys Designware Multimedia Card Interface Driver [ 2.902768] dwmmc_rockchip 30000000.dwmmc: IDMAC supports 32-bit address mode. [ 2.902936] dwmmc_rockchip 30000000.dwmmc: Using internal DMA controller. [ 2.902959] dwmmc_rockchip 30000000.dwmmc: Version ID is 270a [ 2.903041] dwmmc_rockchip 30000000.dwmmc: DW MMC controller at irq 45,32 bit host data width,256 deep fifo [ 2.903110] dwmmc_rockchip 30000000.dwmmc: No vmmc regulator found [ 2.903122] dwmmc_rockchip 30000000.dwmmc: No vqmmc regulator found [ 2.903148] dwmmc_rockchip 30000000.dwmmc: GPIO lookup for consumer cd [ 2.903158] dwmmc_rockchip 30000000.dwmmc: using device tree for GPIO lookup [ 2.903189] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/dwmmc@30000000[0]' - status (0) [ 2.903236] gpio-49 (cd): gpiod_set_debounce: missing set() or set_debounce() operations [ 2.903249] dwmmc_rockchip 30000000.dwmmc: Got CD GPIO [ 2.903262] dwmmc_rockchip 30000000.dwmmc: GPIO lookup for consumer wp [ 2.903271] dwmmc_rockchip 30000000.dwmmc: using device tree for GPIO lookup [ 2.903282] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@30000000[0]' [ 2.903292] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@30000000[0]' [ 2.903301] dwmmc_rockchip 30000000.dwmmc: using lookup tables for GPIO lookup [ 2.903312] dwmmc_rockchip 30000000.dwmmc: lookup for GPIO wp failed [ 2.916137] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0) [ 2.929166] dwmmc_rockchip 30000000.dwmmc: 1 slots initialized [ 2.929659] dwmmc_rockchip 30010000.dwmmc: num-slots property not found, assuming 1 slot is available [ 2.929763] dwmmc_rockchip 30010000.dwmmc: IDMAC supports 32-bit address mode. [ 2.929888] dwmmc_rockchip 30010000.dwmmc: Using internal DMA controller. [ 2.929910] dwmmc_rockchip 30010000.dwmmc: Version ID is 270a [ 2.929979] dwmmc_rockchip 30010000.dwmmc: DW MMC controller at irq 46,32 bit host data width,256 deep fifo [ 2.930047] dwmmc_rockchip 30010000.dwmmc: No vmmc regulator found [ 2.930059] dwmmc_rockchip 30010000.dwmmc: No vqmmc regulator found [ 2.930080] dwmmc_rockchip 30010000.dwmmc: GPIO lookup for consumer wp [ 2.930091] dwmmc_rockchip 30010000.dwmmc: using device tree for GPIO lookup [ 2.930105] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@30010000[0]' [ 2.930115] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@30010000[0]' [ 2.930125] dwmmc_rockchip 30010000.dwmmc: using lookup tables for GPIO lookup [ 2.930136] dwmmc_rockchip 30010000.dwmmc: lookup for GPIO wp failed [ 2.930226] dwmmc_rockchip 30010000.dwmmc: allocated mmc-pwrseq [ 2.941797] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 400000Hz, actual 244140HZ div = 2) [ 2.954484] dwmmc_rockchip 30010000.dwmmc: 1 slots initialized [ 2.955107] dwmmc_rockchip 30020000.dwmmc: IDMAC supports 32-bit address mode. [ 2.955253] dwmmc_rockchip 30020000.dwmmc: Using internal DMA controller. [ 2.955274] dwmmc_rockchip 30020000.dwmmc: Version ID is 270a [ 2.955347] dwmmc_rockchip 30020000.dwmmc: DW MMC controller at irq 47,32 bit host data width,256 deep fifo [ 2.955410] dwmmc_rockchip 30020000.dwmmc: No vmmc regulator found [ 2.955421] dwmmc_rockchip 30020000.dwmmc: No vqmmc regulator found [ 2.955443] dwmmc_rockchip 30020000.dwmmc: GPIO lookup for consumer wp [ 2.955454] dwmmc_rockchip 30020000.dwmmc: using device tree for GPIO lookup [ 2.955467] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@30020000[0]' [ 2.955478] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@30020000[0]' [ 2.955487] dwmmc_rockchip 30020000.dwmmc: using lookup tables for GPIO lookup [ 2.955498] dwmmc_rockchip 30020000.dwmmc: lookup for GPIO wp failed [ 2.968292] mmc_host mmc2: Bus speed (slot 0) = 2343750Hz (slot req 400000Hz, actual 390625HZ div = 3) [ 2.981048] dwmmc_rockchip 30020000.dwmmc: 1 slots initialized [ 2.982154] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/auxiliary[0]' - status (0) [ 2.982993] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-leds/working[0]' - status (0) [ 2.983794] ledtrig-cpu: registered to indicate activity on CPUs [ 2.984078] hidraw: raw HID events driver (C) Jiri Kosina [ 2.985465] usbcore: registered new interface driver usbhid [ 2.985499] usbhid: USB HID core driver [ 2.986541] ashmem: initialized [ 2.992103] rknandbase v1.2 2018-05-08 [ 2.993034] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 300000Hz, actual 244140HZ div = 2) [ 2.995513] usbcore: registered new interface driver snd-usb-audio [ 2.995806] usbcore: registered new interface driver snd-ua101 [ 2.996095] usbcore: registered new interface driver snd-usb-caiaq [ 2.996349] usbcore: registered new interface driver snd-usb-6fire [ 2.996856] usbcore: registered new interface driver snd-usb-hiface [ 2.997298] usbcore: registered new interface driver snd-bcd2000 [ 2.997520] usbcore: registered new interface driver snd_usb_pod [ 2.997724] usbcore: registered new interface driver snd_usb_podhd [ 2.997929] usbcore: registered new interface driver snd_usb_toneport [ 2.998153] usbcore: registered new interface driver snd_usb_variax [ 3.012353] u32 classifier [ 3.012397] input device check on [ 3.012462] Actions configured [ 3.012620] Netfilter messages via NETLINK v0.30. [ 3.012885] nfnl_acct: registering with nfnetlink. [ 3.013124] nf_conntrack version 0.5.0 (15384 buckets, 61536 max) [ 3.014102] Initializing XFRM netlink socket [ 3.014991] NET: Registered protocol family 10 [ 3.016855] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.017303] sit: IPv6 over IPv4 tunneling driver [ 3.018271] NET: Registered protocol family 17 [ 3.018328] NET: Registered protocol family 15 [ 3.018404] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 3.018449] Bridge firewalling registered [ 3.018462] can: controller area network core (rev 20120528 abi 9) [ 3.018536] NET: Registered protocol family 29 [ 3.018558] can: raw protocol (rev 20120528) [ 3.018572] can: broadcast manager protocol (rev 20120528 t) [ 3.018593] can: netlink gateway (rev 20130117) max_hops=1 [ 3.019112] Bluetooth: RFCOMM TTY layer initialized [ 3.019158] Bluetooth: RFCOMM socket layer initialized [ 3.019209] Bluetooth: RFCOMM ver 1.11 [ 3.019244] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.019264] Bluetooth: HIDP socket layer initialized [ 3.019479] 8021q: 802.1Q VLAN Support v1.8 [ 3.019538] lib80211: common routines for IEEE802.11 drivers [ 3.019551] lib80211_crypt: registered algorithm 'NULL' [ 3.019568] lib80211_crypt: registered algorithm 'WEP' [ 3.019583] lib80211_crypt: registered algorithm 'CCMP' [ 3.019598] lib80211_crypt: registered algorithm 'TKIP' [ 3.019612] [WLAN_RFKILL]: Enter rfkill_wlan_init [ 3.019964] [BT_RFKILL]: Enter rfkill_rk_init [ 3.020426] Key type dns_resolver registered [ 3.021076] flash vendor_init_thread! [ 3.021104] flash vendor storage:20170308 ret = -1 [ 3.021192] Error: Driver 'sc031gs' is already registered, aborting... [ 3.022363] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 3.023097] Registering SWP/SWPB emulation handler [ 3.024538] mmc_host mmc2: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 3.025297] mmc2: new DDR MMC card at address 0001 [ 3.025774] registered taskstats version 1 [ 3.025813] Loading compiled-in X.509 certificates [ 3.026500] mmcblk2: mmc2:0001 Biwin 7.20 GiB [ 3.027177] mmcblk2boot0: mmc2:0001 Biwin partition 1 4.00 MiB [ 3.027815] mmcblk2boot1: mmc2:0001 Biwin partition 2 4.00 MiB [ 3.028463] mmcblk2rpmb: mmc2:0001 Biwin partition 3 4.00 MiB [ 3.029443] Btrfs loaded [ 3.030645] mmcblk2: p1 [ 3.030942] rga2: Driver loaded successfully ver:4.01 [ 3.031195] rga2: Module initialized. [ 3.031244] pvtm list NULL [ 3.032558] rk-vcodec 20030000.rkvdec: leakage=4 [ 3.032598] rk-vcodec 20030000.rkvdec: leakage-volt-sel=0 [ 3.032833] rk-vcodec 20030000.rkvdec: Failed to get pvtm [ 3.033273] rk-vcodec 20030000.rkvdec: avs=0 [ 3.033570] rk-vcodec 20030000.rkvdec: probe device [ 3.034091] rk-vcodec 20030000.rkvdec: drm allocator with mmu enabled [ 3.036319] rk-vcodec 20030000.rkvdec: init success [ 3.037533] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/hdmi-sound[0]' [ 3.037561] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/hdmi-sound[0]' [ 3.038586] asoc-simple-card hdmi-sound: i2s-hifi <-> 100c0000.i2s0 mapping ok [ 3.041644] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/spdif-sound[0]' [ 3.041674] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/spdif-sound[0]' [ 3.042689] asoc-simple-card spdif-sound: dit-hifi <-> 100d0000.spdif mapping ok [ 3.045073] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/reset[0]' - status (0) [ 3.045186] gpio-121 (reset): gpiod_set_debounce: missing set() or set_debounce() operations [ 3.045591] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 3.046102] hctosys: unable to open rtc device (rtc0) [ 3.048468] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 200000Hz, actual 162760HZ div = 3) [ 3.059380] ALSA device list: [ 3.059420] #0: DW-I2S-HDMI [ 3.059429] #1: SPDIF [ 3.060445] Freeing unused kernel memory: 808K [ 3.060459] This architecture does not have kernel memory protection. [ 3.104985] mmc_host mmc1: Bus speed (slot 0) = 976562Hz (slot req 100000Hz, actual 97656HZ div = 5) [ 3.532162] vendor storage:20190527 ret = 0 [ 4.514402] random: nonblocking pool is initialized [ 4.650269] EXT4-fs (mmcblk2p1): mounted filesystem with writeback data mode. Opts: (null) [ 5.112970] systemd[1]: System time before build time, advancing clock. [ 5.125708] systemd[1]: Inserted module 'autofs4' [ 5.134968] ip_tables: (C) 2000-2006 Netfilter Core Team [ 5.144137] cgroup: cgroup2: unknown option "nsdelegate" [ 5.157642] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 5.159243] systemd[1]: Detected architecture arm. [ 5.175037] systemd[1]: Set hostname to <rk322x-box>. [ 5.385575] ttyS2 - failed to request DMA, use interrupt mode [ 5.516565] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. [ 5.516620] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) [ 5.904647] systemd[1]: Reached target Remote File Systems. [ 5.906303] systemd[1]: Reached target System Time Synchronized. [ 5.911215] systemd[1]: Created slice system-getty.slice. [ 5.912483] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 5.913436] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch when bootsplash is active being skipped. [ 5.914323] systemd[1]: Listening on fsck to fsckd communication Socket. [ 5.916841] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 5.918671] systemd[1]: Listening on Journal Socket. [ 5.931144] systemd[1]: Starting Restore / save the current clock... [ 5.932346] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 5.940975] systemd[1]: Starting Remount Root and Kernel File Systems... [ 5.952633] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 5.954564] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped. [ 5.956640] systemd[1]: Listening on udev Kernel Socket. [ 5.974328] systemd[1]: Starting Load Kernel Modules... [ 5.977314] systemd[1]: Listening on Syslog Socket. [ 5.990095] systemd[1]: Mounting Kernel Debug File System... [ 5.997603] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 6.015049] systemd[1]: Starting Set the console keyboard layout... [ 6.017698] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.024555] systemd[1]: Reached target Local Encrypted Volumes. [ 6.026128] systemd[1]: Reached target Paths. [ 6.031648] systemd[1]: Created slice User and Session Slice. [ 6.033091] systemd[1]: Reached target Slices. [ 6.035127] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 6.037085] systemd[1]: Listening on udev Control Socket. [ 6.044466] EXT4-fs (mmcblk2p1): re-mounted. Opts: commit=600,errors=remount-ro [ 6.049067] systemd[1]: Starting udev Coldplug all Devices... [ 6.061414] systemd[1]: Starting Nameserver information manager... [ 6.064557] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.066017] systemd[1]: Reached target Swap. [ 6.079617] systemd[1]: Mounting POSIX Message Queue File System... [ 6.116188] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. [ 6.127033] systemd[1]: Started Restore / save the current clock. [ 6.148913] systemd[1]: Started Remount Root and Kernel File Systems. [ 6.154963] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 6.160059] systemd[1]: Started Load Kernel Modules. [ 6.162090] systemd[1]: Mounted Kernel Debug File System. [ 6.173934] systemd[1]: Mounted POSIX Message Queue File System. [ 6.192059] systemd[1]: Starting Apply Kernel Variables... [ 6.210283] systemd[1]: Mounting Kernel Configuration File System... [ 6.225353] systemd[1]: Condition check resulted in FUSE Control File System being skipped. [ 6.247196] systemd[1]: Starting Create System Users... [ 6.269426] systemd[1]: Starting Load/Save Random Seed... [ 6.290854] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 6.316453] systemd[1]: Started Nameserver information manager. [ 6.327262] systemd[1]: Started Apply Kernel Variables. [ 6.334394] systemd[1]: Mounted Kernel Configuration File System. [ 6.387986] systemd[1]: Started Load/Save Random Seed. [ 6.399155] systemd[1]: Started Create System Users. [ 6.414972] systemd[1]: Starting Create Static Device Nodes in /dev... [ 6.538478] systemd[1]: Started Create Static Device Nodes in /dev. [ 6.554013] systemd[1]: Starting udev Kernel Device Manager... [ 6.575295] systemd[1]: Started Set the console keyboard layout. [ 6.581462] systemd[1]: Reached target Local File Systems (Pre). [ 6.596175] systemd[1]: Mounting /tmp... [ 6.622308] systemd[1]: Mounted /tmp. [ 6.628510] systemd[1]: Reached target Local File Systems. [ 6.641678] systemd[1]: Starting Set console font and keymap... [ 6.658256] systemd[1]: Starting Armbian ZRAM config... [ 6.664173] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 6.691470] systemd[1]: Started Set console font and keymap. [ 6.761914] systemd[1]: Started udev Kernel Device Manager. [ 6.916258] systemd[1]: Started udev Coldplug all Devices. [ 6.951291] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ 7.009844] systemd[1]: Started Helper to synchronize boot up for ifupdown. [ 7.044019] systemd[1]: Starting Raise network interfaces... [ 7.106934] zram: Added device: zram0 [ 7.108560] zram: Added device: zram1 [ 7.111538] zram: Added device: zram2 [ 7.284281] systemd[1]: Found device /dev/ttyS2. [ 7.291162] rk3228-codec 12010000.codec: GPIO lookup for consumer spk-en [ 7.291176] rk3228-codec 12010000.codec: using device tree for GPIO lookup [ 7.291190] of_get_named_gpiod_flags: can't parse 'spk-en-gpios' property of node '/codec@12010000[0]' [ 7.291247] of_get_named_gpiod_flags: parsed 'spk-en-gpio' property of node '/codec@12010000[0]' - status (0) [ 7.291347] rk3228-codec 12010000.codec: spk_depop_time use default value. [ 7.292998] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/sound[0]' [ 7.293099] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/sound[0]' [ 7.337521] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '08:21:05', on 'Apr 25 2021'. [ 7.337974] mali-utgard 20001000.gpu: mali_platform_device->num_resources = 13 [ 7.338006] mali-utgard 20001000.gpu: resource[0].start = 0x0x20001000 [ 7.338020] mali-utgard 20001000.gpu: resource[1].start = 0x0x20000000 [ 7.338033] mali-utgard 20001000.gpu: resource[2].start = 0x0x20003000 [ 7.338044] mali-utgard 20001000.gpu: resource[3].start = 0x0x20008000 [ 7.338055] mali-utgard 20001000.gpu: resource[4].start = 0x0x20004000 [ 7.338065] mali-utgard 20001000.gpu: resource[5].start = 0x0x2000a000 [ 7.338077] mali-utgard 20001000.gpu: resource[6].start = 0x0x20005000 [ 7.338089] mali-utgard 20001000.gpu: resource[7].start = 0x0x00000020 [ 7.338102] mali-utgard 20001000.gpu: resource[8].start = 0x0x00000021 [ 7.338112] mali-utgard 20001000.gpu: resource[9].start = 0x0x00000022 [ 7.338123] mali-utgard 20001000.gpu: resource[10].start = 0x0x00000021 [ 7.338135] mali-utgard 20001000.gpu: resource[11].start = 0x0x00000022 [ 7.338146] mali-utgard 20001000.gpu: resource[12].start = 0x0x00000021 [ 7.338162] D : [File] : drivers/gpu/arm/mali400/mali/platform/rk/rk.c; [Line] : 623; [Func] : mali_platform_device_init(); to add platform_specific_data to platform_device_of_mali. [ 7.338739] mali-utgard 20001000.gpu: leakage=4 [ 7.338804] mali-utgard 20001000.gpu: leakage-volt-sel=0 [ 7.339032] mali-utgard 20001000.gpu: Failed to get pvtm [ 7.339668] mali-utgard 20001000.gpu: avs=0 [ 7.340260] mali-utgard 20001000.gpu: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 [ 7.354159] asoc-simple-card sound: rk3228-hifi <-> 100b0000.i2s1 mapping ok [ 7.378221] Mali: Mali device driver loaded [ 7.437102] devfreq 20001000.gpu: Couldn't update frequency transition information. [ 7.643596] gpio_ir_recv ir-receiver: GPIO lookup for consumer (null) [ 7.643655] gpio_ir_recv ir-receiver: using device tree for GPIO lookup [ 7.643725] of_get_named_gpiod_flags: parsed 'gpios' property of node '/ir-receiver[0]' - status (0) [ 7.643894] Registered IR keymap rc-rktvbox [ 7.644271] rc rc1: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc1 [ 7.645826] input: gpio_ir_recv as /devices/platform/ir-receiver/rc/rc1/input2 [ 7.668208] zram0: detected capacity change from 0 to 504537088 [ 7.839088] Adding 492708k swap on /dev/zram0. Priority:5 extents:1 across:492708k SS [ 8.151187] systemd[1]: Started Raise network interfaces. [ 8.199517] cfg80211: World regulatory domain updated: [ 8.199586] cfg80211: DFS Master region: unset [ 8.199605] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 8.199638] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 8.199666] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 8.199696] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 8.199723] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 8.199757] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 8.199775] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 8.199801] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 8.199826] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 8.399643] zram1: detected capacity change from 0 to 52428800 [ 8.497950] systemd[1]: Started Armbian ZRAM config. [ 8.660152] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 8.672089] systemd[1]: Starting Armbian memory supported logging... [ 8.677322] systemd[1]: Reached target Sound Card. [ 8.814356] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard [ 12.817421] systemd[1]: Started Armbian memory supported logging. [ 12.829714] systemd[1]: Starting Journal Service... [ 13.279270] systemd[1]: Started Journal Service. [ 13.369066] systemd-journald[541]: Received request to flush runtime journal from PID 1 [ 16.096440] nr_pdflush_threads exported in /proc is scheduled for removal [ 16.881189] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 18.945345] rk_gmac-dwmac 30200000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx sorry for bothering you but because i'm just noob . thx
  4. after reboot it not work, i try modprobe esp8089 but not success: [ 285.560355] esp8089: unknown parameter 'crystal_26M_en' ignored tried sudo modprobe esp8089 config=crystal_26M_en=1 still have above message, I saw crystal is 26Mhz
  5. thx, it work. Now box can boot, but no wifi , can u teach me how to get wifi work. I use sudo modprobe esp8089 but nothing, get these from dmesg: [ 3.875575] 8021q: 802.1Q VLAN Support v1.8 [ 3.875677] lib80211: common routines for IEEE802.11 drivers [ 3.875699] lib80211_crypt: registered algorithm 'NULL' [ 3.875731] lib80211_crypt: registered algorithm 'WEP' [ 3.875763] lib80211_crypt: registered algorithm 'CCMP' [ 3.875795] lib80211_crypt: registered algorithm 'TKIP' [ 3.875826] [WLAN_RFKILL]: Enter rfkill_wlan_init [ 3.876735] [WLAN_RFKILL]: Enter rfkill_wlan_probe [ 3.877026] mmc_host mmc2: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 3.877082] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = esp8089 [ 3.877115] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control. [ 3.877136] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio. [ 3.877163] of_get_named_gpiod_flags: can't parse 'WIFI,poweren_gpio' property of node '/wireless-wlan[0]' [ 3.877184] of_get_named_gpiod_flags: can't parse 'WIFI,vbat_gpio' property of node '/wireless-wlan[0]' [ 3.877207] of_get_named_gpiod_flags: can't parse 'WIFI,reset_gpio' property of node '/wireless-wlan[0]' [ 3.877290] of_get_named_gpiod_flags: parsed 'WIFI,host_wake_irq' property of node '/wireless-wlan[0]' - status (0) [ 3.877312] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 28, flags = 1. [ 3.877348] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found ! [ 3.877368] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio [ 3.877394] [WLAN_RFKILL]: Exit rfkill_wlan_probe and esp8089: unknown parameter 'crystal_26M_en' ignored thx a lot.
  6. I used that rom to restore with MASK Rom mode: https://drive.google.com/drive/folders/1mxqba_lReweZw9IQCfI_LceVfj2nUYj7 Serial log when use original Rom: DDR Version V1.09 20190628 In ID:0xFFF 300MHz LPDDR3 Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=32 Size=1024MB mach:2 OUT Boot1 Release Time: May 4 2018 15:21:31, version: 2.49 ChipType = 0xc, 342 mmc2:cmd19,256 SdmmcInit=2 0 BootCapSize=2000 UserCapSize=7376MB FwPartOffset=2000 , 2000 SdmmcInit=0 NOT PRESENT StorageInit ok = 36740 SecureMode = 0 GPT 00@0x00012000(kernel),0x0000a000@0x00018000(boot),0x00010000@0x00022000(recovery),0x00020000@0x00032000(backup),0x00040000@0x00052000(cache),0x00008000@0x00092000(metadata),0x00002000@0x0009a000(kpanic),0x00400000@0x0009c000(system),-@0x0049c000(userdata) ?I▒▒ signature is wrong LOADER Check OK! 0x60000000, 55134 TOS Check OK! 0x68400000, 65932 Enter Trust OS INF TEE-CORE:init_primary_helper:319: Initializing (1.0.1-72-gf230aa2 #2 Fri Sep 29 10:22:10 UTC 2017 arm) INF TEE-CORE:init_primary_helper:320: Release version: 2.0 INF TEE-CORE:init_teecore:79: teecore inits done <hit enter to activate fiq debugger> [ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.104 (lsh@ubuntu1) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #21 SMP PREEMPT Wed Mar 24 17:08:09 CST 2021 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Rockchip RK3229, model: rockchip,rk3229 [ 0.000000] rockchip_uboot_logo_setup: mem: 0x02000000@0x9dc00000, offset:0x01000000 [ 0.000000] hdmi init vic is 16 [ 0.000000] cvbs init tve.format is -1 [ 0.000000] cvbs init tve.format is -1 [ 0.000000] cvbs init tve.format is -1 [ 0.000000] cvbs init tve.format is 0 [ 0.000000] rockchip_uboot_mem_reserve: reserve 0x02000000@0x9dc00000 for uboot logo [ 0.000000] rockchip_ion_reserve [ 0.000000] ion heap(cma): base(0) size(0) align(0) [ 0.000000] ion heap(drm): base(0) size(0) align(0) [ 0.000000] ion heap(vmalloc): base(0) size(0) align(0) [ 0.000000] cma: CMA: reserved 16 MiB at 7f000000 [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] psci: probing function IDs from device-tree [ 0.000000] PERCPU: Embedded 9 pages/cpu @c16ca000 s13440 r8192 d15232 u36864 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260864 [ 0.000000] Kernel command line: vmalloc=496M psci=enable rockchip_jtag console=ttyFIQ0 androidboot.selinux=disabled androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00004000@0x00004000(trust),0x00002000@0x00008000(misc),0x00000800@0x0000A000(baseparamer),0x00007800@0x0000A800(resource),0x00006000@0x00012000(kernel),0x0000a000@0x00018000(boot),0x00010000@0x00022000(recovery),0x00020000@0x00032000(backup),0x00040000@0x00052000(cache),0x00008000@0x00092000(metadata),0x00002000@0x0009a000(kpanic),0x00400000@0x0009c000(system),-@0x0049c000(userdata) storagemedia=emmc uboot_logo=0x02000000@0x9dc00000:0x01000000 loader.timestamp=2021-03-24_17:08:36 hdmi.vic=16 tve.format=-1 SecureBootCheckOk=0 [ 0.000000] rockchip jtag enabled [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] allocated 2097152 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 132MB 891MB = 1023MB total [ 0.000000] Memory: 970908k/970908k available, 76644k reserved, 491516K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0c208ec (12387 kB) [ 0.000000] .init : 0xc0c21000 - 0xc0c81480 ( 386 kB) [ 0.000000] .data : 0xc0c82000 - 0xc0d69120 ( 925 kB) [ 0.000000] .bss : 0xc0d69120 - 0xc0e8eea4 (1176 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] rk_clk_tree_init start! [ 0.000000] rk_get_uboot_display_flag: uboot_logo_on = 1 [ 0.000000] rkclk_init_clks: cnt_parent = 13 [ 0.000000] rkclk_init_clks: cnt_rate = 19 [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] Switching to timer-based delay loop [ 0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns [ 0.000000] process version: 0 [ 0.000000] channel:0, lkg:5 [ 0.000000] target-temp:95 [ 0.000000] channel:2, lkg:4 [ 0.000000] target-temp:0 [ 0.000000] channel:2, lkg:4 [ 0.000000] target-temp:95 [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms [ 2.259200] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 2.259227] pid_max: default: 32768 minimum: 301 [ 2.259460] Security Framework initialized [ 2.259494] SELinux: Initializing. [ 2.259627] Mount-cache hash table entries: 512 [ 2.260786] Initializing cgroup subsys debug [ 2.260817] Initializing cgroup subsys memory [ 2.260866] Initializing cgroup subsys freezer [ 2.260933] CPU: Testing write buffer coherency: ok [ 2.261508] /cpus/cpu@0 missing clock-frequency property [ 2.261537] /cpus/cpu@1 missing clock-frequency property [ 2.261555] /cpus/cpu@2 missing clock-frequency property [ 2.261573] /cpus/cpu@3 missing clock-frequency property [ 2.261691] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [ 2.261741] Setting up static identity map for 0xc086f670 - 0xc086f6c8 [ 2.264036] last_log: 0x7e900000 map to 0xe0804000 and copy to 0xe0886000, size 0x80000 early 0x1838 (version 3.1) [ 2.337272] CPU1: Booted secondary processor [ 2.337340] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [ 2.356968] CPU2: Booted secondary processor [ 2.357015] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 [ 2.376693] CPU3: Booted secondary processor [ 2.376738] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 [ 2.376917] Brought up 4 CPUs [ 2.376966] SMP: Total of 4 processors activated (192.00 BogoMIPS). [ 2.376980] CPU: All CPU(s) started in SVC mode. [ 2.378495] devtmpfs: initialized [ 2.386447] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 2.388329] pinctrl core: initialized pinctrl subsystem [ 2.388869] regulator-dummy: no parameters [ 2.409172] NET: Registered protocol family 16 [ 2.412368] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 2.413214] ion_snapshot: 0x7ea60000 map to 0xe0907000 and copy to 0xc0e624b4 (version 0.1) [ 2.413459] Registered FIQ tty driver [ 2.415837] console [ttyFIQ0] enabled [ 2.416398] Registered fiq debugger ttyFIQ0 [ 2.418686] syscon 10140000.syscon: regmap [mem 0x10140000-0x10140fff] registered [ 2.419024] syscon 11000000.syscon: regmap [mem 0x11000000-0x11000fff] registered [ 2.419362] syscon 110e0000.syscon: regmap [mem 0x110e0000-0x110e0fff] registered [ 2.419676] syscon 11200000.syscon: regmap [mem 0x11200000-0x112003ff] registered [ 2.419984] syscon 31020000.syscon: regmap [mem 0x31020000-0x31022fff] registered [ 2.425861] rk_iommu 20053f00.vop_mmu: (vop) Enter [ 2.426025] rk_iommu 20053f00.vop_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000. [ 2.426052] rk_iommu 20053f00.vop_mmu: (vop) Initialized [ 2.426330] rk_iommu 20020800.vpu_mmu: (vpu) Enter [ 2.426451] rk_iommu 20020800.vpu_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000. [ 2.426475] rk_iommu 20020800.vpu_mmu: (vpu) Initialized [ 2.426730] rk_iommu 20070800.iep_mmu: (iep) Enter [ 2.426849] rk_iommu 20070800.iep_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000. [ 2.426874] rk_iommu 20070800.iep_mmu: (iep) Initialized [ 2.427146] rk_iommu 20030480.vdec_mmu: (vdec) Enter [ 2.427265] rk_iommu 20030480.vdec_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000. [ 2.427292] rk_iommu 20030480.vdec_mmu: (vdec) Initialized [ 2.437229] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 2.437263] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 2.437307] rockchip sip version v1 [ 2.438020] rk3368_init_rohing to clocksource arch_sys_counter [ 2.538146] rga: Module initialized. [ 2.539045] rga2 20060000.rga: rga ion client create success! [ 2.539433] rga: Driver loaded succesfully [ 2.539794] fb disp policy is box [ 2.539837] uboot-logo-on:1 [ 2.539907] rk-fb rockchip-fb: rk fb ion client create success! [ 2.539931] rk-fb rockchip-fb: rockchip framebuffer driver probe [ 2.540526] can't find screen_init node [ 2.540556] rk-screen rk_screen.15: rockchip screen probe success [ 2.542577] rk322x-lcdc 20050000.vop: vop_dev->regs=0xe0930000 [ 2.542729] rk322x-lcdc vop0: can't find power_ctr node for lcdc0 [ 2.543250] graphics fb0: rockchip framebuffer registerd:fb0 [ 2.544020] graphics fb1: rockchip framebuffer registerd:fb1 [ 2.544427] graphics fb2: rockchip framebuffer registerd:fb2 [ 2.545556] rk322x-lcdc vop0: lcdc0: dclk:148500000>>fps:60 [ 2.562525] alloc_buffer:ion_phy_addr=0x10000000 [ 2.569380] fb0:phy:10000000>>vir:e0937000>>len:0xb00000 [ 2.619926] rk_iommu 20053f00.vop_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x7e9db000 [ 2.620004] rk322x-lcdc vop0: lcdc0 probe ok, iommu enabled [ 2.623727] NET: Registered protocol family 2 [ 2.625098] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 2.625249] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 2.625349] TCP: Hash tables configured (established 4096 bind 4096) [ 2.625456] TCP: reno registered [ 2.625481] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 2.625523] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 2.625879] NET: Registered protocol family 1 [ 2.626484] RPC: Registered named UNIX socket transport module. [ 2.626515] RPC: Registered udp transport module. [ 2.626532] RPC: Registered tcp transport module. [ 2.626549] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.627966] Unpacking initramfs... [ 2.763006] Freeing initrd memory: 1436K (c5bf0000 - c5d57000) [ 2.764612] hw perfevents: enabled with ARMv7_Cortex_A7 PMU driver, 5 counters available [ 2.769404] audit: initializing netlink socket (disabled) [ 2.769575] type=2000 audit(0.510:1): initialized [ 2.771093] bounce pool size: 64 pages [ 2.780487] NFS: Registering the id_resolver key type [ 2.780630] Key type id_resolver registered [ 2.780652] Key type id_legacy registered [ 2.781506] fuse init (API version 7.22) [ 2.782384] msgmni has been set to 971 [ 2.782986] [ 2.782986] TEE Core Framework initialization (ver 1:0.1) [ 2.783071] TEE armv7 Driver initialization [ 2.783691] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0" [ 2.783724] TEE core: Alloc the misc device "opteearmtz00" (id=0) [ 2.784131] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=58) [ 2.787238] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 2.787286] io scheduler noop registered [ 2.787308] io scheduler deadline registered [ 2.787545] io scheduler cfq registered (default) [ 2.790351] HDMI: no pull up gpio [ 2.791615] input: hdmi_cec_key as /devices/virtual/input/input0 [ 2.792111] rockchip-hdmiv2 200a0000.hdmi: rockchip hdmiv2 probe success. [ 2.792926] iep: failed to find iep power down clock source. [ 2.793605] iep ion client create success! [ 2.793633] IEP Power ON [ 2.794119] rk_iommu 20070800.iep_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x7ea50000 [ 2.794165] IEP Power OFF [ 2.794198] IEP Driver loaded succesfully [ 2.794407] Module initialized. [ 2.795460] rk3036-tve 20053e00.tve: Can not read det_io [ 2.795639] rk3036-tve 20053e00.tve: rockchip,rk322x-tve tv encoder probe ok [ 2.798925] dma-pl330 110f0000.pdma: Loaded driver for PL330 DMAC-2364208 [ 2.798982] dma-pl330 110f0000.pdma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16 [ 2.799670] vdd_arm: 950 <--> 1400 mV at 1100 mV [ 2.800273] vdd_logic: 1000 <--> 1300 mV at 1200 mV [ 2.800976] rk_serial.c v2.0 2017-06-30 [ 2.801623] 11020000.serial: ttyS1 at MMIO 0x11020000 (irq = 88) is a rk29_serial.1 [ 2.802141] serial 11020000.serial: membase e244e000 [ 2.802516] ++++++++cyx_led_init [ 2.802776] <melvin> drivers/char/cyx_led/cyx_led.c(38) cyx_led_probe: ..........>>>>>>>> [ 2.802958] id0: 1 id1: 1 id2: 0 [ 2.809279] loop: module loaded [ 2.810065] zram: Created 1 device(s) [ 2.810307] i2c-core: driver [mpu6050B1] using legacy suspend method [ 2.810328] i2c-core: driver [mpu6050B1] using legacy resume method [ 2.810349] mpu_init: Probe name mpu6050B1 [ 2.810654] ak8963_mod_init: Probe name ak8963_mod [ 2.812297] SCSI Media Changer driver v0.25 [ 2.813086] tun: Universal TUN/TAP device driver, 1.6 [ 2.813122] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 2.813434] vmac_init. [ 2.814513] stmmac_probe_config_dt: Can not read property: pmu_regulator. [ 2.814544] stmmac_probe_config_dt: clock input/output? (output). [ 2.814565] stmmac_probe_config_dt: TX delay(0x26). [ 2.814583] stmmac_probe_config_dt: RX delay(0x11). [ 2.814601] stmmac_probe_config_dt: internal PHY/external PHY? (internal). [ 2.814789] stmmc_pltfr_init: [ 2.814831] stmmc_pltfr_init: ERROR: Get power-gpio failed. [ 2.814850] stmmc_pltfr_init: ERROR: Get reset-gpio failed. [ 2.814911] stmmc_pltfr_init: init for RMII [ 2.815250] stmmac - user ID: 0x10, Synopsys ID: 0x35 [ 2.815272] Normal descriptors [ 2.815286] Ring mode enabled [ 2.815303] DMA HW capability register supported [ 2.815321] RX Checksum Offload Engine supported (type 2) [ 2.815338] TX Checksum insertion supported [ 2.815352] Wake-Up On Lan supported [ 2.815438] Enable RX Mitigation via HW Watchdog Timer [ 2.816168] ------------[ cut here ]------------ [ 2.816212] WARNING: at drivers/base/core.c:561 device_create_file+0x68/0x84() [ 2.816231] Attribute eth_reset: read permission without 'show' [ 2.816248] Modules linked in: [ 2.816275] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.10.104 #21 [ 2.816328] [<c0014088>] (unwind_backtrace+0x0/0xe0) from [<c00118cc>] (show_stack+0x10/0x14) [ 2.816366] [<c00118cc>] (show_stack+0x10/0x14) from [<c003f484>] (warn_slowpath_common+0x4c/0x68) [ 2.816403] [<c003f484>] (warn_slowpath_common+0x4c/0x68) from [<c003f520>] (warn_slowpath_fmt+0x2c/0x3c) [ 2.816438] [<c003f520>] (warn_slowpath_fmt+0x2c/0x3c) from [<c038bea0>] (device_create_file+0x68/0x84) [ 2.816477] [<c038bea0>] (device_create_file+0x68/0x84) from [<c03e6c54>] (stmmac_dvr_probe+0x290/0x318) [ 2.816512] [<c03e6c54>] (stmmac_dvr_probe+0x290/0x318) from [<c03eca24>] (stmmac_pltfr_probe+0xf0/0x1d4) [ 2.816549] [<c03eca24>] (stmmac_pltfr_probe+0xf0/0x1d4) from [<c038ff60>] (platform_drv_probe+0x14/0x18) [ 2.816586] [<c038ff60>] (platform_drv_probe+0x14/0x18) from [<c038ed94>] (really_probe+0xa8/0x20c) [ 2.816621] [<c038ed94>] (really_probe+0xa8/0x20c) from [<c038eff0>] (driver_probe_device+0x30/0x48) [ 2.816654] [<c038eff0>] (driver_probe_device+0x30/0x48) from [<c038f068>] (__driver_attach+0x60/0x84) [ 2.816687] [<c038f068>] (__driver_attach+0x60/0x84) from [<c038d830>] (bus_for_each_dev+0x50/0x90) [ 2.816719] [<c038d830>] (bus_for_each_dev+0x50/0x90) from [<c038e5e4>] (bus_add_driver+0xac/0x20c) [ 2.816752] [<c038e5e4>] (bus_add_driver+0xac/0x20c) from [<c038f54c>] (driver_register+0x9c/0xe0) [ 2.816788] [<c038f54c>] (driver_register+0x9c/0xe0) from [<c0c4c374>] (stmmac_init+0xc/0x38) [ 2.816822] [<c0c4c374>] (stmmac_init+0xc/0x38) from [<c00086a4>] (do_one_initcall+0x34/0xc8) [ 2.816855] [<c00086a4>] (do_one_initcall+0x34/0xc8) from [<c0c21b30>] (do_initcalls+0x70/0xa0) [ 2.816889] [<c0c21b30>] (do_initcalls+0x70/0xa0) from [<c0c21c4c>] (kernel_init_freeable+0xec/0x190) [ 2.816924] [<c0c21c4c>] (kernel_init_freeable+0xec/0x190) from [<c0849d58>] (kernel_init+0x8/0xe4) [ 2.816960] [<c0849d58>] (kernel_init+0x8/0xe4) from [<c000dba0>] (ret_from_fork+0x14/0x34) [ 2.817034] ---[ end trace 447f800f34f48500 ]--- [ 2.817230] PPP generic driver version 2.4.2 [ 2.817631] PPP BSD Compression module registered [ 2.817658] PPP Deflate Compression module registered [ 2.817704] PPP MPPE Compression module registered [ 2.817725] NET: Registered protocol family 24 [ 2.817795] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled). [ 2.817816] CSLIP: code copyright 1989 Regents of the University of California. [ 2.817835] Rockchip WiFi SYS interface (V1.00) ... [ 2.817904] esp_mem_init enter date Mar 15 2021 14:48:09 [ 2.817924] esp_mem_init VERSION [V2.5] [ 2.818021] esp_mem_init complete [ 2.818164] usbcore: registered new interface driver catc [ 2.818317] usbcore: registered new interface driver kaweth [ 2.818341] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 2.818429] usbcore: registered new interface driver pegasus [ 2.818506] usbcore: registered new interface driver rtl8150 [ 2.818579] usbcore: registered new interface driver r8152 [ 2.818597] hso: drivers/net/usb/hso.c: Option Wireless [ 2.818736] usbcore: registered new interface driver hso [ 2.818825] usbcore: registered new interface driver asix [ 2.818914] usbcore: registered new interface driver ax88179_178a [ 2.818993] usbcore: registered new interface driver cdc_ether [ 2.819069] usbcore: registered new interface driver cdc_eem [ 2.819143] usbcore: registered new interface driver dm9601 [ 2.819226] usbcore: registered new interface driver dm9620 [ 2.819320] usbcore: registered new interface driver smsc75xx [ 2.819427] usbcore: registered new interface driver smsc95xx [ 2.819502] usbcore: registered new interface driver gl620a [ 2.819578] usbcore: registered new interface driver net1080 [ 2.819653] usbcore: registered new interfde is 3 [ 2.874432] hdmi connect to lcdc0 [ 2.874450] switch:en=1,lcdc_id=0,screen type=6,cur type=1 [ 2.874468] data space: 0, color mode: 3 [ 2.874538] rk322x-lcdc vop0: lcdc0: dclk:148500000>>fps:60 [ 2.874600] pixel clk is 148500000 tmds clk is 148500000 [ 2.874635] hub 3-0:1.0: USB hub found [ 2.874656] rockchip-hdmiv2 200a0000.hdmi: [hdmi_dev_config_video] success output HDMI. [ 2.874699] hub 3-0:1.0: 1 port detected [ 2.875550] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.875841] ohci-platform: OHCI generic platform driver [ 2.876080] ohci-platform 300a0000.ohci0: Generic Platform OHCI controller [ 2.876136] ohci-platform 300a0000.ohci0: new USB bus registered, assigned bus number 4 [ 2.876229] ohci-platform 300a0000.ohci0: irq 49, io mem 0x300a0000 [ 2.936596] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.936645] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.936671] usb usb4: Product: Generic Platform OHCI controller [ 2.936693] usb usb4: Manufacturer: Linux 3.10.104 ohci_hcd [ 2.936714] usb usb4: SerialNumber: 300a0000.ohci0 [ 2.937605] hub 4-0:1.0: USB hub found [ 2.937654] hub 4-0:1.0: 1 port detected [ 2.938126] ohci-platform 300e0000.ohci1: Generic Platform OHCI controller [ 2.938177] ohci-platform 300e0000.ohci1: new USB bus registered, assigned bus number 5 [ 2.938262] ohci-platform 300e0000.ohci1: irq 52, io mem 0x300e0000 [ 2.995643] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.995691] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.995717] usb usb5: Product: Generic Platform OHCI controller [ 2.995738] usb usb5: Manufacturer: Linux 3.10.104 ohci_hcd [ 2.995759] usb usb5: SerialNumber: 300e0000.ohci1 [ 2.996617] hub 5-0:1.0: USB hub found [ 2.996663] hub 5-0:1.0: 1 port detected [ 2.997127] ohci-platform 30120000.ohci2: Generic Platform OHCI controller [ 2.997190] ohci-platform 30120000.ohci2: new USB bus registered, assigned bus number 6 [ 2.997282] ohci-platform 30120000.ohci2: irq 99, io mem 0x30120000 [ 3.054660] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.054706] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.054730] usb usb6: Product: Generic Platform OHCI controller [ 3.054752] usb usb6: Manufacturer: Linux 3.10.104 ohci_hcd [ 3.054774] usb usb6: SerialNumber: 30120000.ohci2 [ 3.055613] hub 6-0:1.0: USB hub found [ 3.055671] hub 6-0:1.0: 1 port detected [ 3.056312] usbcore: registered new interface driver cdc_acm [ 3.056335] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 3.056455] usbcore: registered new interface driver usblp [ 3.056553] usbcore: registered new interface driver cdc_wdm [ 3.056755] usbcore: registered new interface driver usb-storage [ 3.056840] usbcore: registered new interface driver ums-alauda [ 3.056919] usbcore: registered new interface driver ums-cypress [ 3.057014] usbcore: registered new interface driver ums-datafab [ 3.057095] usbcore: registered new interface driver ums_eneub6250 [ 3.057173] usbcore: registered new interface driver ums-freecom [ 3.057253] usbcore: registered new interface driver ums-isd200 [ 3.057330] usbcore: registered new interface driver ums-jumpshot [ 3.057403] usbcore: registered new interface driver ums-karma [ 3.057480] usbcore: registered new interface driver ums-onetouch [ 3.057558] usbcore: registered new interface driver ums-sddr09 [ 3.057648] usbcore: registered new interface driver ums-sddr55 [ 3.057729] usbcore: registered new interface driver ums-usbat [ 3.057935] usbcore: registered new interface driver usbserial [ 3.058020] usbcore: registered new interface driver usbserial_generic [ 3.058083] usbserial: USB Serial support registered for generic [ 3.058171] usbcore: registered new interface driver option [ 3.058232] usbserial: USB Serial support registered for GSM modem (1-port) [ 3.058647] usbcore: registered new interface driver trancevibrator [ 3.058667] usb20_otg: version 3.10a 21-DEC-2012 [ 3.059683] e2680040 [ 3.059713] Core Release: 3.10a [ 3.059732] Setting default values for core params [ 3.060030] Using Buffer DMA mode [ 3.060052] Periodic Transfer Interrupt Enhancement - disabled [ 3.060071] Multiprocessor Interrupt Enhancement - disabled [ 3.060088] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 3.060105] ^^^^^^^^^^^^^^^^^Device Mode [ 3.060131] Dedicated Tx FIFOs mode [ 3.060168] pcd_init otg_dev = dde34dc0 [ 3.060791] usb20_otg 30040000.otg: DWC OTG Controller [ 3.060855] usb20_otg 30040000.otg: new USB bus registered, assigned bus number 7 [ 3.060923] usb20_otg 30040000.otg: irq 55, io mem 0x00000000 [ 3.061058] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.061085] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.061108] usb usb7: Product: DWC OTG Controller [ 3.061130] usb usb7: Manufacturer: Linux 3.10.104 dwc_otg_hcd [ 3.061152] usb usb7: SerialNumber: 30040000.otg [ 3.062138] hub 7-0:1.0: USB hub found [ 3.062197] hub 7-0:1.0: 1 port detected [ 3.062809] usb20_host: version 3.10a 21-DEC-2012 [ 3.065444] usbcore: registered new interface driver xpad [ 3.065570] usbcore: registered new interface driver usb_acecad [ 3.065672] usbcore: registered new interface driver aiptek [ 3.065767] usbcore: registered new interface driver gtco [ 3.065880] usbcore: registered new interface driver hanwang [ 3.065973] usbcore: registered new interface driver kbtab [ 3.066102] usbcore: registered new interface driver wacom [ 3.066252] ==gsl_ts_init== [ 3.066308] ret=0 [ 3.066363] i2c-core: driver [gslX680] using legacy suspend method [ 3.066381] i2c-core: driver [gslX680] using legacy resume method [ 3.067339] sensor_register_slave:mma8452,id=17 [ 3.067367] sensor_register_slave:mma7660,id=18 [ 3.067385] sensor_register_slave:gs_mc3230,id=23 [ 3.067401] [Gsensor] gsensor_init [ 3.067418] sensor_register_slave:mpu6880_acc,id=24 [ 3.067435] sensor_register_slave:mpu6500_acc,id=25 [ 3.067453] sensor_register_slave:bma2xx_acc,id=26 [ 3.067471] sensor_register_slave:akm8963,id=30 [ 3.067489] sensor_register_slave:cm3217,id=51 [ 3.067505] sensor_register_slave:cm3218,id=52 [ 3.067523] sensor_register_slave:ls_stk3410,id=60 [ 3.068276] .. rk pwm remotectl v1.1 init [ 3.068786] input: 110b0030.pwm as /devices/110b0030.pwm/input/input1 [ 3.069294] remotectl-pwm 110b0030.pwm: Missing psci property in the DT. [ 3.069477] ++++++++shutdown_key_init [ 3.069740] ........shutdown_key_probe [ 3.070028] input: shutdown_key as /devices/shutdown-key.30/input/input2 [ 3.070798] VFD Driver [ 3.071293] vfd: gpio_clk=32, gpio_stb=33, gpio_dio=34 [ 3.072825] input: vfd_keypad as /devices/cyx-vfd.31/input/input3 [ 3.073204] vfd config major:245 [ 3.073730] i2c /dev entries driver [ 3.074142] IR NEC protocol handler initialized [ 3.074166] IR RC5(x) protocol handler initialized [ 3.074182] IR RC6 protocol handler initialized [ 3.074199] IR JVC protocol handler initialized [ 3.074215] IR Sony protocol handler initialized [ 3.074230] IR RC5 (streamzap) protocol handler initialized [ 3.074247] IR SANYO protocol handler initialized [ 3.074263] IR MCE Keyboard/mouse protocol handler initialized [ 3.074592] usbcore: registered new interface driver uvcvideo [ 3.074612] USB Video Class driver (1.1.1) [ 3.074633] CamSys driver version: v0.35.0, CamSys head file version: v0.13.0 [ 3.074655] E:camsys_soc_init(36): camsys isn't support soc: 0x32283002! [ 3.075349] not find test_power_init dev node [ 3.075425] i2c-core: driver [bq27320] using legacy suspend method [ 3.075444] i2c-core: driver [bq27320] using legacy resume method [ 3.076957] rockchip_temp_probe,line=384 [ 3.077641] tsadc 11150000.tsadc: Missing tsadc_low_temp in the DT. [ 3.129350] tsadc 11150000.tsadc: initialized [ 3.130363] device-mapper: uevent: version 1.0.3 [ 3.131017] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com [ 3.131540] Bluetooth: HCI UART driver ver 2.2 [ 3.131566] Bluetooth: HCI H4 protocol initialized [ 3.131584] Bluetooth: HCILL protocol initialized [ 3.131602] rtk_btusb: RTKBT_RELEASE_NAME: 20170109_TV_ANDROID_6.x [ 3.131620] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.2 [ 3.131638] rtk_btusb: Register usb char device interface for BT driver [ 3.132068] usbcore: registered new interface driver rtk_btusb [ 3.132568] cpufreq version 1.0, suspend freq 1008 MHz [ 3.133183] cpuidle: using governor ladder [ 3.133206] cpuidle: using governor menu [ 3.133285] Synopsys Designware Multimedia Card Interface Driver [ 3.133304] MHSC version = Ver 2.00 2015-06-10 [ 3.133916] dwmmc_rockchip 30020000.rksdmmc: Version ID is 270a [ 3.134029] dwmmc_rockchip 30020000.rksdmmc: failed to get hpclk_mmc [ 3.134538] dwmmc_rockchip 30020000.rksdmmc: Using PIO mode. [ 3.134936] dwmmc_rockchip 30020000.rksdmmc: dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0] [ 3.149068] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0] [ 3.158996] dwc_otg_hcd_suspend, usb device mode [ 3.168842] dwmmc_rockchip 30020000.rksdmmc: DW MMC controller at irq 46, 32 bit host data width, 256 deep fifo [ 3.168885] dwmmc_rockchip 30020000.rksdmmc: 1 slots initialized [ 3.169652] dwmmc_rockchip 30000000.rksdmmc: Version ID is 270a [ 3.169765] dwmmc_rockchip 30000000.rksdmmc: failed to get hpclk_mmc [ 3.170175] dwmmc_rockchip 30000000.rksdmmc: Using PIO mode. [ 3.170569] dwmmc_rockchip 30000000.rksdmmc: dw_mci_init_slot: fmin=400000, fmax=37500000 [mmc1] [ 3.170866] dwmmc_rockchip 30000000.rksdmmc: mmc1: No udbg pinctrl found! [ 3.188477] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc1] [ 3.208234] dwmmc_rockchip 30000000.rksdmmc: DW MMC controller at irq 44, 32 bit host data width, 256 deep fifo [ 3.208303] dwmmc_rockchip 30000000.rksdmmc: 1 slots initialized [ 3.209591] dwmmc_rockchip 30010000.rksdmmc: Version ID is 270a [ 3.209752] dwmmc_rockchip 30010000.rksdmmc: failed to get hpclk_mmc [ 3.210456] dwmmc_rockchip 30010000.rksdmmc: Using PIO mode. [ 3.211065] dwmmc_rockchip 30010000.rksdmmc: dw_mci_init_slot: fmin=200000, fmax=37500000 [mmc2] [ 3.227869] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc2] [ 3.241069] mmc0: BKOPS_EN bit is not set [ 3.244344] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 3.244417] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0] [ 3.245114] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=8bits.[mmc0] [ 3.246428] mmc0: new high speed MMC card at address 0001 [ 3.247649] dwmmc_rockchip 30010000.rksdmmc: DW MMC controller at irq 45, 32 bit host data width, 256 deep fifo [ 3.247686] mmcblk0: mmc0:0001 Biwin 7.20 GiB [ 3.247735] dwmmc_rockchip 30010000.rksdmmc: 1 slots initialized [ 3.248294] mmcblk0rpmb: mmc0:0001 Biwin partition 3 4.00 MiB [ 3.249051] hidraw: raw HID events driver (C) Jiri Kosina [ 3.249616] rkpart: partition size too small (0) [ 3.249674] uboot: 0x000400000 -- 0x000800000 (4 MB) [ 3.249712] trust: 0x000800000 -- 0x001000000 (8 MB) [ 3.249747] misc: 0x001000000 -- 0x001400000 (4 MB) [ 3.249781] baseparamer: 0x001400000 -- 0x001500000 (1 MB) [ 3.249817] resource: 0x001500000 -- 0x002400000 (15 MB) [ 3.249853] kernel: 0x002400000 -- 0x003000000 (12 MB) [ 3.249888] boot: 0x003000000 -- 0x004400000 (20 MB) [ 3.249923] recovery: 0x004400000 -- 0x006400000 (32 MB) [ 3.249959] backup: 0x006400000 -- 0x00a400000 (64 MB) [ 3.249995] cache: 0x00a400000 -- 0x012400000 (128 MB) [ 3.250032] metadata: 0x012400000 -- 0x013400000 (16 MB) [ 3.250068] kpanic: 0x013400000 -- 0x013800000 (4 MB) [ 3.250103] system: 0x013800000 -- 0x093800000 (2048 MB) [ 3.250140] userdata: 0x093800000 -- 0x1ccc00000 (5012 MB) [ 3.250248] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14[ 3.256487] usbcore: registered new interface driver usbhid [ 3.256530] usbhid: USB HID core driver [ 3.257116] ashmem: initialized [ 3.257793] logger: created 256K log 'log_main' [ 3.258298] logger: created 256K log 'log_events' [ 3.258803] logger: created 256K log 'log_radio' [ 3.259309] logger: created 256K log 'log_system' [ 3.261800] rknandbase v1.1 2016-11-08 [ 3.262374] rknand: probe of 30030000.nandc failed with error -1 [ 3.267975] rockchip-spdif 100d0000.spdif: spdif ready. [ 3.292639] rk322x-audio rockchip_audio.26: rk322x-hifi <-> 100b0000.i2s1 mapping ok [ 3.299227] rockchip-hdmi-i2s rockchip_hdmi_i2s.28: rk-hdmi-i2s-hifi <-> 100c0000.i2s0 mapping ok [ 3.300979] u32 classifier [ 3.301029] Actions configured [ 3.301061] Netfilter messages via NETLINK v0.30. [ 3.301214] nf_conntrack version 0.5.0 (15448 buckets, 61792 max) [ 3.302200] ctnetlink v0.93: registering with nfnetlink. [ 3.302360] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 3.302385] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 3.303336] xt_time: kernel timezone is -0000 [ 3.303964] ip_tables: (C) 2000-2006 Netfilter Core Team [ 3.304370] arp_tables: (C) 2002 David S. Miller [ 3.304485] TCP: cubic registered [ 3.304506] Initializing XFRM netlink socket [ 3.305333] NET: Registered protocol family 10 [ 3.307045] mip6: Mobile IPv6 [ 3.307131] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 3.307430] sit: IPv6 over IPv4 tunneling driver [ 3.308385] NET: Registered protocol family 17 [ 3.308454] NET: Registered protocol family 15 [ 3.308602] Bridge firewalling registered [ 3.308665] Ebtables v2.0 registered [ 3.309056] Bluetooth: RFCOMM TTY layer initialized [ 3.309129] Bluetooth: RFCOMM socket layer initialized [ 3.309149] Bluetooth: RFCOMM ver 1.11 [ 3.309167] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 3.309182] Bluetooth: BNEP filters: protocol multicast [ 3.309210] Bluetooth: BNEP socket layer initialized [ 3.309228] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 3.309252] Bluetooth: HIDP socket layer initialized [ 3.309404] l2tp_core: L2TP core driver, V2.0 [ 3.309442] l2tp_ppp: PPPoL2TP kernel driver, V2.0 [ 3.309460] [WLAN_RFKILL]: Enter rfkill_wlan_init [ 3.309810] [WLAN_RFKILL]: Enter rfkill_wlan_probe [ 3.309836] [WLAN_RFKILL]: can't find rockchip,grf property [ 3.309856] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = esp8089 [ 3.309875] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control. [ 3.309892] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control. [ 3.309910] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio. [ 3.309997] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 90, flags = 0. [ 3.310069] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 28, flags = 0. [ 3.310088] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio [ 3.310164] [WLAN_RFKILL]: rockchip_wifi_power: 1 [ 3.310184] [BT_RFKILL]: rfkill_get_bt_power_state: rfkill-bt driver has not Successful initialized [ 3.310202] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1 [ 3.310218] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled. [ 3.414802] [WLAN_RFKILL]: wifi turn on power. 90 [ 3.414870] mmc2:mmc host rescan start! [ 3.414922] [WLAN_RFKILL]: Exit rfkill_wlan_probe [ 3.415136] [BT_RFKILL]: Enter rfkill_rk_init [ 3.416079] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 102. [ 3.416169] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 93. [ 3.416274] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 123. [ 3.416350] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 122. [ 3.416478] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,lecctl_gpio = 39. [ 3.416562] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,ledctl_gpio_r6 = 117. [ 3.416739] [BT_RFKILL]: Request irq for bt wakeup host [ 3.417063] [BT_RFKILL]: ** disable irq [ 3.417148] [BT_RFKILL]: Failed to get ap6335_ledctl gpio. [ 3.417208] [BT_RFKILL]: Failed to get ap6335_ledctl_r6 gpio. [ 3.417638] [BT_RFKILL]: ap6335 device registered. [ 3.418413] Key type dns_resolver registered [ 3.422982] rk322x_suspend_init: pm_ctrbits = 0x11806 [ 3.423070] Registering SWP/SWPB emulation handler [ 3.423115] rockchip_uboot_mem_late_init: Freeing uboot logo memory: 0x02000000@0x9dc00000 [ 3.438156] ddrfreq: verion 1.2 20140526 [ 3.438219] ddrfreq: normal 600MHz performance 660MHz low_power 0MHz video_1080p 0MHz video_4k 660MHz dualview 0MHz idle 0MHz suspend 0MHz reboot 600MHz video_4k_10b 660MHz [ 3.439988] ddrfreq: auto-freq=0 [ 3.440025] ddrfreq: auto-freq-table epmty! [ 3.441713] regulator-dummy: disabling [ 3.442294] pcd_pullup, is_on 0 [ 3.442463] file system registered [ 3.444878] android_usb gadget: Mass Storage Function, version: 2009/09/11 [ 3.444928] android_usb gadget: Number of LUNs=2 [ 3.444954] lun0: LUN: removable file: (no medium) [ 3.444976] lun1: LUN: removable file: (no medium) [ 3.445723] android_usb gadget: android_usb ready [ 3.445847] sensor_init: Probe name sensors [ 3.445906] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01 [ 3.445936] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 3.461744] rockchip-spdif-card rockchip_spdif_card.27: rk-hdmi-spdif-hifi <-> 100d0000.spdif mapping ok [ 3.463495] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 414; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '-aca6ab02a7', rk_ko_ver is '5', built at '17:08:02', on 'Mar 24 2021'. [ 3.463945] mali-utgard 20001000.gpu: mali_platform_device->num_resources = 13 [ 3.463980] mali-utgard 20001000.gpu: resource[0].start = 0x0x20001000 [ 3.464009] mali-utgard 20001000.gpu: resource[1].start = 0x0x20000000 [ 3.464035] mali-utgard 20001000.gpu: resource[2].start = 0x0x20003000 [ 3.464062] mali-utgard 20001000.gpu: resource[3].start = 0x0x20008000 [ 3.464088] mali-utgard 20001000.gpu: resource[4].start = 0x0x20004000 [ 3.464116] mali-utgard 20001000.gpu: resource[5].start = 0x0x2000a000 [ 3.464142] mali-utgard 20001000.gpu: resource[6].start = 0x0x20005000 [ 3.464170] mali-utgard 20001000.gpu: resource[7].start = 0x0x00000026 [ 3.464196] mali-utgard 20001000.gpu: resource[8].start = 0x0x00000025 [ 3.464222] mali-utgard 20001000.gpu: resource[9].start = 0x0x00000024 [ 3.464249] mali-utgard 20001000.gpu: resource[10].start = 0x0x00000025 [ 3.464275] mali-utgard 20001000.gpu: resource[11].start = 0x0x00000024 [ 3.464301] mali-utgard 20001000.gpu: resource[12].start = 0x0x00000025 [ 3.464432] mali-utgard 20001000.gpu: freq: 200000000, min_threshold: 0, max_threshold: 70 [ 3.464463] mali-utgard 20001000.gpu: freq: 300000000, min_threshold: 61, max_threshold: 85 [ 3.464494] mali-utgard 20001000.gpu: freq: 400000000, min_threshold: 73, max_threshold: 100 [ 3.464630] mali-utgard 20001000.gpu: initial freq = 200000000 [ 3.468067] Mali: Mali device driver loaded [ 3.469051] usbcore: registered new interface driver snd-usb-audio [ 3.469079] ALSA device list: [ 3.469097] #0: RK_RK322x [ 3.469115] #1: RK-HDMI-I2S [ 3.469132] #2: RK-SPDIF-CARD [ 3.470144] Freeing unused kernel memory: 384K (c0c21000 - c0c81000) [ 3.474754] init: init first stage started! [ 3.479830] init: init second stage started! [ 3.488512] init: Setting ro.rk.soc=rk3229 [ 3.488842] init: OK,EMMC DRIVERS INIT OK [ 3.488940] init: property_set("ro.boot.mode", "emmc") failed [ 3.489264] init: property_set("ro.hardware", "rk30board") failed [ 3.489918] init: Running restorecon... [ 3.490199] init: waitpid failed: No child processes [ 3.491392] init: (Loading properties from /default.prop took 0.00s.) [ 3.498311] init: (Parsing /init.environ.rc took 0.00s.) [ 3.500080] init: (Parsing /init.usb.rc took 0.00s.) [ 3.503857] init: (Parsing init.rk30board.bootmode.emmc.rc took 0.00s.) [ 3.508304] init: (Parsing init.rk30board.usb.rc took 0.00s.) [ 3.508561] init: (Parsing init.rk30board.environment.rc took 0.00s.) [ 3.508678] init: could not import file '/init.debug.rc' from 'init.rockchip.rc': No such file or directory [ 3.508732] init: (Parsing init.rockchip.rc took 0.00s.) [ 3.510488] init: (Parsing init.connectivity.rc took 0.00s.) [ 3.510887] init: (Parsing init.box.samba.rc took 0.00s.) [ 3.510994] init: could not import file 'init.rk322x.rc' from '/init.rk30board.rc': No such file or directory [ 3.511504] init: (Parsing init.box.rc took 0.00s.) [ 3.511605] init: could not import file 'init.car.rc' from '/init.rk30board.rc': No such file or directory [ 3.511678] init: could not import file 'init.optee.rc' from '/init.rk30board.rc': No such file or directory [ 3.511734] init: (Parsing /init.rk30board.rc took 0.01s.) [ 3.514651] init: (Parsing /init.usb.configfs.rc took 0.00s.) [ 3.515075] init: (Parsing /init.zygote32.rc took 0.00s.) [ 3.515135] init: (Parsing /init.rc took 0.02s.) [ 3.516057] init: Starting service 'ueventd'... [ 3.518525] init: Waiting for /dev/.coldboot_done... [ 3.521461] ueventd: ueventd started! [ 3.523076] ueventd: invalid gid 'trace' [ 3.631253] mmc_host mmc2: Bus speed (slot 0) = 37500000Hz (slot req 400000Hz, actual 398936HZ div = 47) [ 3.631311] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc2] [ 3.631721] ueventd: Coldboot took 0.11s. [ 3.638538] init: Waiting for /dev/.coldboot_done took 0.12s. [ 3.638682] init: /dev/hw_random not found [ 3.639311] keychord: using input dev hdmi_cec_key for fevent [ 3.639350] keychord: using input dev 110b0030.pwm for fevent [ 3.639363] keychord: using input dev shutdown_key for fevent [ 3.648490] init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory [ 3.648957] pm policy 0 -> 1 [ 3.649820] init: /dev/hw_random not found [ 3.651576] fs_mgr: Warning: unknown flag resize [ 3.657391] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option [ 3.665957] EXT4-fs (mmcblk0p13): warning: maximal mount count reached, running e2fsck is recommended [ 3.671005] mmc2 not switch iovel. [ 3.675670] mmc2: queuing unknown CIS tuple 0x01 (3 bytes) [ 3.683169] mmc2: queuing unknown CIS tuple 0x1a (5 bytes) [ 3.686046] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit [ 3.686289] fs_mgr: check_fs(): mount(/dev/block/platform/30020000.rksdmmc/by-name/system,/system,ext4)=0: Success [ 3.686641] mmc2: queuing unknown CIS tuple 0x1b (8 bytes) [ 3.687828] mmc_host mmc2: Bus speed (slot 0) = 37500000Hz (slot req 37500000Hz, actual 37500000HZ div = 0) [ 3.687885] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2] [ 3.688103] rk_sdmmc: BOOT Bus speed=37500000Hz,Bus width=4bits.[mmc2] [ 3.690382] mmc2: queuing unknown CIS tuple 0x80 (1 bytes) [ 3.690491] mmc2: queuing unknown CIS tuple 0x81 (1 bytes) [ 3.690607] mmc2: queuing unknown CIS tuple 0x82 (1 bytes) [ 3.690615] fs_mgr: check_fs(): unmount(/system) succeeded [ 3.690677] mmc2: new high speed SDIO card at address 0001 [ 3.690719] fs_mgr: Not running /system/bin/e2fsck on /dev/block/platform/30020000.rksdmmc/by-name/system (executable not in system image) [ 3.700906] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: noauto_da_alloc [ 3.701045] fs_mgr: __mount(source=/dev/block/platform/30020000.rksdmmc/by-name/system,target=/system,type=ext4)=0 [ 3.719077] EXT4-fs (mmcblk0p10): warning: maximal mount count reached, running e2fsck is recommended [ 3.720214] EXT4-fs (mmcblk0p10): recovery complete [ 3.721036] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard [ 3.721161] fs_mgr: __mount(source=/dev/block/platform/30020000.rksdmmc/by-name/cache,target=/cache,type=ext4)=0 [ 3.722132] EXT4-fs (mmcblk0p11): Ignoring removed nomblk_io_submit option [ 3.725795] EXT4-fs (mmcblk0p11): recovery complete [ 3.725846] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit [ 3.725957] fs_mgr: check_fs(): mount(/dev/block/platform/30020000.rksdmmc/by-name/metadata,/metadata,ext4)=0: Success [ 3.727694] fs_mgr: check_fs(): unmount(/metadata) succeeded [ 3.729215] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/30020000.rksdmmc/by-name/metadata [ 3.964101] vendor storage:20160801 ret = 0 [ 3.967718] e2fsck: e2fsck 1.42.9 (28-Dec-2013) [ 3.967718] [ 3.967843] e2fsck: /dev/block/platform/30020000.rksdmmc/by-name/metadata has been mounted 10 times without being checked, check forced. [ 3.967843] [ 3.967893] e2fsck: Pass 1: Checking inodes, blocks, and sizes [ 3.967893] [ 3.967927] e2fsck: Pass 2: Checking directory structure [ 3.967927] [ 3.967962] e2fsck: Pass 3: Checking directory connectivity [ 3.967962] [ 3.967996] e2fsck: Pass 4: Checking reference counts [ 3.967996] [ 3.968029] e2fsck: Pass 5: Checking group summary information [ 3.968029] [ 3.968066] e2fsck: /dev/block/platform/30020000.rksdmmc/by-name/metadata: 11/1024 files (0.0% non-contiguous), 1102/4096 blocks [ 3.968066] [ 3.973703] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard [ 3.973861] fs_mgr: __mount(source=/dev/block/platform/30020000.rksdmmc/by-name/metadata,target=/metadata,type=ext4)=0 [ 3.974857] EXT4-fs (mmcblk0p14): Ignoring removed nomblk_io_submit option [ 4.048067] EXT4-fs (mmcblk0p14): recovery complete [ 4.048915] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit [ 4.049041] fs_mgr: check_fs(): mount(/dev/block/platform/30020000.rksdmmc/by-name/userdata,/data,ext4)=0: Success [ 4.051776] fs_mgr: check_fs(): unmount(/data) succeeded [ 4.051900] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/30020000.rksdmmc/by-name/userdata [ 4.115099] e2fsck: e2fsck 1.42.9 (28-Dec-2013) [ 4.115099] [ 4.115232] e2fsck: /dev/block/platform/30020000.rksdmmc/by-name/userdata: clean, 2883/321280 files, 331936/1283072 blocks [ 4.115232] [ 4.120996] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,errors=panic [ 4.121152] fs_mgr: __mount(source=/dev/block/platform/30020000.rksdmmc/by-name/userdata,target=/data,type=ext4)=0 [ 4.137444] init: (Parsing /system/etc/init/atrace.rc took 0.00s.) [ 4.138608] init: (Parsing /system/etc/init/audioserver.rc took 0.00s.) [ 4.139571] init: (Parsing /system/etc/init/bootanim.rc took 0.00s.) [ 4.140772] init: (Parsing /system/etc/init/bootstat.rc took 0.00s.) [ 4.141809] init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.) [ 4.142735] init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.) [ 4.143935] init: (Parsing /system/etc/init/drmserver.rc took 0.00s.) [ 4.145330] init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.) [ 4.146303] init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.) [ 4.147301] init: (Parsing /system/etc/init/init-debug.rc took 0.00s.) [ 4.148224] init: (Parsing /system/etc/init/installd.rc took 0.00s.) [ 4.149132] init: (Parsing /system/etc/init/keystore.rc took 0.00s.) [ 4.150047] init: (Parsing /system/etc/init/lmkd.rc took 0.00s.) [ 4.151560] init: (Parsing /system/etc/init/logcatd.rc took 0.00s.) [ 4.152617] init: (Parsing /system/etc/init/logd.rc took 0.00s.) [ 4.153701] init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.) [ 4.154704] init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.) [ 4.155723] init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.) [ 4.156655] init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.) [ 4.157637] init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.) [ 4.158539] init: (Parsing /system/etc/init/mtpd.rc took 0.00s.) [ 4.159454] init: (Parsing /system/etc/init/netd.rc took 0.00s.) [ 4.160358] init: (Parsing /system/etc/init/perfprofd.rc took 0.00s.) [ 4.161257] init: (Parsing /system/etc/init/racoon.rc took 0.00s.) [ 4.162249] init: ignored duplicate definition of service 'ril-daemon'init: (Parsing /system/etc/init/rild.rc took 0.00s.) [ 4.163501] init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.) [ 4.164456] init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.) [ 4.165462] init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.) [ 4.166439] init: (Parsing /system/etc/init/vdc.rc took 0.00s.) [ 4.167407] init: (Parsing /system/etc/init/vold.rc took 0.00s.) [ 4.171555] init: property_set("ro.board.platform", "rk322x") failed [ 4.173125] init: property_set("ro.opengles.version", "196609") failed [ 4.173608] init: property_set("ro.rk.screenoff_time", "2147483647") failed [ 4.174312] init: property_set("ro.rk.screenshot_enable", "true") failed [ 4.175069] init: (Loading properties from /system/build.prop took 0.01s.) [ 4.175292] init: (Loading properties from /vendor/build.prop took 0.00s.) [ 4.175378] init: (Loading properties from /factory/factory.prop took 0.00s.) [ 4.175711] fs_mgr: Warning: unknown flag resize [ 4.176013] init: /recovery not specified in fstab [ 4.176261] init: Starting service 'healthd'... [ 4.177264] init: Starting service 'displayd'... [ 4.178364] init: Starting service 'lmkd'... [ 4.179352] init: Starting service 'servicemanager'... [ 4.182036] init: Starting service 'surfaceflinger'... [ 4.183159] init: Starting service 'vold'... [ 4.186009] binder: 139:139 transaction failed 29189, size 0-0 [ 4.193153] init: insmod: open("/system/lib/modules/ump.ko") failed: No such file or directoryinit: insmod: open("/system/lib/modules/mali.ko") failed: No such file or directoryinit: insmod: open("/system/lib/modules/mali_kbase.ko") failed: No such file or directoryinit: insmod: open("/system/lib/modules/rk30_mirroring.ko") failed: No such file or directory [ 4.217060] rk29_ipp: version magic '3.0.101+ SMP preempt mod_unload ARMv7 ' should be '3.10.104 SMP preempt mod_unload ARMv7 p2v8 ' [ 4.217167] init: finit_module for "/system/lib/modules/rk29-ipp.ko" failed: Exec format errorinit: insmod: open("/system/lib/modules/pvrsrvkm.ko") failed: No such file or directory [ 4.217743] drmboot: module license 'unspecified' taints kernel. [ 4.217761] Disabling lock debugging due to kernel taint [ 4.218518] drm init, 20140910 [ 4.281489] drm init ok [ 4.281844] fs_mgr: Warning: unknown flag resize [ 4.283487] zram: Cannot initialise lz4 compressing backend [ 4.354752] Unable to find swap-space signature [ 4.355437] fs_mgr: swapon failed for /dev/block/zram0 [ 4.371779] vcodec_service: No noc aclk reset resource define [ 4.371827] vcodec_service: No noc hclk reset resource define [ 4.371838] vcodec_service: No core reset resource define [ 4.371848] vcodec_service: No cabac reset resource define [ 4.371978] vcodec 20020000.vpu_service: do not have pd_video [ 4.372029] vcodec_service: probe device 20020000.vpu_service [ 4.372108] vcodec_service: checking hw id 0 [ 4.374185] vcodec_service: init success [ 4.374403] vcodec_service: No noc aclk reset resource define [ 4.374422] vcodec_service: No noc hclk reset resource define [ 4.374432] vcodec_service: No core reset resource define [ 4.374441] vcodec_service: No cabac reset resource define [ 4.374580] vcodec 20030000.rkvdec: do not have pd_video [ 4.374622] vcodec_service: probe device 20030000.rkvdec [ 4.374719] vcodec_service: checking hw id 6876 [ 4.378112] vcodec_service: init success [ 4.383013] init: Starting service 'debuggerd'... [ 4.383731] init: do_start: Service debuggerd64 not found [ 4.391728] init: Not bootcharting. [ 4.773598] fs_mgr: Warning: unknown flag resize [ 4.802089] init: Failed to reload policy [ 4.802635] init: Starting service 'exec 1 (/system/bin/tzdatacheck)'... [ 4.813464] rk_fb_set_par[3407],var->reserved[3]:0x1 [ 4.813479] rk_fb_pan_display[1531],var->reserved[3]:0x1 [ 4.837811] init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 164) exited with status 0 [ 4.892150] EXT4-fs (mmcblk0p14): Unrecognized mount option "seclabel" or missing value [ 5.012261] init: Starting service 'logd'... [ 5.014811] init: Starting service 'bootanim'... [ 5.016086] init: Starting service 'logd-reinit'... [ 5.016202] <melvin> drivers/video/rockchip/hdmi/rockchip-hdmiv2/rockchip_hdmiv2.c(466) rockchip_hdmiv2_fb_event_notify: ..........>>>>>>>> FB_EARLY_EVENT_BLANK -> FB_BLANK_UNBLANK [ 5.016326] .....................sleep=0 [ 5.017452] rk322x-lcdc vop0: blank mode:0 [ 5.029581] init: write_file: Unable to open '/proc/sys/vm/lazy_vfree_tlb_flush_all_threshold': No such file or directory [ 5.034140] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}' [ 5.034242] init: write: cannot expand '${ro.serialno}' [ 5.034970] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead [ 5.043491] init: write_file: Unable to write to '/dev/cpuset/foreground/boost/cpus': Permission denied [ 5.044943] init: Starting service 'adbd'... [ 5.047222] android_usb: already disabled [ 5.049506] init: cannot find '/system/bin/update_verifier' (No such file or directory), disabling 'exec 2 (/system/bin/update_verifier)' [ 5.049781] init: Starting service 'flash_recovery'... [ 5.050751] init: Starting service 'drmservice'... [ 5.051791] init: cannot find '/system/bin/bplus_helper' (No such file or directory), disabling 'bplus_helper' [ 5.051982] init: cannot find '/system/bin/busybox' (No such file or directory), disabling 'up_eth0' [ 5.052084] init: cannot find '/system/bin/rk_store_keybox' (No such file or directory), disabling 'rk_store_keybox' [ 5.052213] init: cannot find '/system/bin/akmd' (No such file or directory), disabling 'akmd' [ 5.052423] init: Starting service 'zygote'... [ 5.053519] init: Starting service 'audioserver'... [ 5.054586] init: Starting service 'cameraserver'... [ 5.055734] init: Starting service 'drm'... [ 5.055980] init: couldn't write 183 to /dev/cpuset/camera-daemon/tasks: No such file or directory [ 5.056836] init: Starting service 'installd'... [ 5.059040] init: Starting service 'keystore'... [ 5.060597] init: Starting service 'mediacodec'... [ 5.062149] init: Starting service 'mediadrm'... [ 5.063848] init: Starting service 'mediaextractor'... [ 5.065548] init: Starting service 'media'... [ 5.067633] init: Starting service 'netd'... [ 5.069548] init: Starting service 'gatekeeperd'... [ 5.153638] logd.auditd: start [ 5.153717] logd.klogd: 2937316459 [ 5.178728] healthd: No battery devices found [ 5.178922] healthd: battery l=100 v=0 t=42.4 h=2 st=2 chg=a [ 5.861305] RKNAND_GET_SN_SECTOR [ 5.861363] return ret = 0 [ 5.932820] fs_mgr: Warning: unknown flag resize [ 6.713462] init: Starting service 'perfprofd'... [ 7.140168] init: Service 'logd-reinit' (pid 177) exited with status 145 [ 7.150223] init: Service 'drmservice' (pid 180) exited with status 0 [ 7.247415] read descriptors [ 7.247521] read descriptors [ 7.247584] read strings [ 7.247666] pcd_pullup, is_on 1 [ 7.333707] init: Service 'perfprofd' (pid 203) exited with status 0 [ 8.816661] init: Service 'flash_recovery' (pid 179) exited with status 0 [ 10.962073] [otg id chg] last id -1 current id 2 [ 10.962130] PortPower off [ 10.962153] rk_battery_charger_detect_cb , battery_charger_detect 6 [ 11.061593] Using Buffer DMA mode [ 11.061647] Periodic Transfer Interrupt Enhancement - disabled [ 11.061658] Multiprocessor Interrupt Enhancement - disabled [ 11.061671] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 11.061682] ^^^^^^^^^^^^^^^^^Device Mode [ 11.061717] dwc_otg_hcd_resume, usb device mode [ 11.168855] dwc_otg_hcd_suspend, usb device mode [ 11.553366] ***************vbus detect***************** [ 11.553565] rk_battery_charger_detect_cb , battery_charger_detect 255 [ 11.745990] Using Buffer DMA mode [ 11.746057] Periodic Transfer Interrupt Enhancement - disabled [ 11.746069] Multiprocessor Interrupt Enhancement - disabled [ 11.746080] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 11.746092] ^^^^^^^^^^^^^^^^^Device Mode [ 11.758325] *******************soft connect!!!******************* [ 12.001078] rk322x-lcdc vop0: win0:new_addr:0x10e88000 cur_addr:0x10b02000--1 [ 12.536462] **************soft reconnect************** [ 12.722002] Using Buffer DMA mode [ 12.722064] Periodic Transfer Interrupt Enhancement - disabled [ 12.722076] Multiprocessor Interrupt Enhancement - disabled [ 12.722088] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 12.722098] ^^^^^^^^^^^^^^^^^Device Mode [ 12.726169] *******************soft connect!!!******************* [ 13.520458] **************soft reconnect************** [ 13.705026] Using Buffer DMA mode [ 13.705078] Periodic Transfer Interrupt Enhancement - disabled [ 13.705088] Multiprocessor Interrupt Enhancement - disabled [ 13.705101] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 13.705113] ^^^^^^^^^^^^^^^^^Device Mode [ 13.709149] *******************soft connect!!!******************* [ 13.843047] rk322x-lcdc vop0: win0:new_addr:0x10e88000 cur_addr:0x10b02000--1 [ 14.504411] **************soft reconnect************** [ 14.691514] Using Buffer DMA mode [ 14.691558] Periodic Transfer Interrupt Enhancement - disabled [ 14.691569] Multiprocessor Interrupt Enhancement - disabled [ 14.691582] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 14.691594] ^^^^^^^^^^^^^^^^^Device Mode [ 14.695622] *******************soft connect!!!******************* [ 15.046351] warning: `main' uses 32-bit capabilities (legacy support in use) [ 15.387454] rk322x-lcdc vop0: win0:new_addr:0x10b02000 cur_addr:0x10e88000--1 [ 15.488430] **************soft reconnect************** [ 15.665708] Using Buffer DMA mode [ 15.665758] Periodic Transfer Interrupt Enhancement - disabled [ 15.665770] Multiprocessor Interrupt Enhancement - disabled [ 15.665783] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 15.665794] ^^^^^^^^^^^^^^^^^Device Mode [ 15.669832] *******************soft connect!!!******************* [ 15.714393] rk322x-lcdc vop0: win0:new_addr:0x10e88000 cur_addr:0x10b02000--1 [ 16.472431] **************soft reconnect************** [ 16.649832] Using Buffer DMA mode [ 16.649881] Periodic Transfer Interrupt Enhancement - disabled [ 16.649895] Multiprocessor Interrupt Enhancement - disabled [ 16.649907] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 16.649919] ^^^^^^^^^^^^^^^^^Device Mode [ 16.653943] *******************soft connect!!!******************* [ 17.649432] rk322x-lcdc vop0: win0:new_addr:0x10b02000 cur_addr:0x10e88000--1 [ 17.697464] rk322x-lcdc vop0: win0:new_addr:0x10e88000 cur_addr:0x10b02000--1 [ 19.994056] rk322x-lcdc vop0: win0:new_addr:0x10e88000 cur_addr:0x10b02000--1 [ 21.715962] rk322x-lcdc vop0: win0:new_addr:0x10b02000 cur_addr:0x10e88000--1 [ 21.764092] rk322x-lcdc vop0: win0:new_addr:0x10e88000 cur_addr:0x10b02000--1 [ 26.310689] rk322x-lcdc vop0: win0:new_addr:0x10e88000 cur_addr:0x10b02000--1 [ 27.491210] rk322x-lcdc vop0: win0:new_addr:0x10e88000 cur_addr:0x10b02000--1 [ 30.275331] rk322x-lcdc vop0: win0:new_addr:0x10e88000 cur_addr:0x10b02000--1 [ 30.410397] rk322x-lcdc vop0: win0:new_addr:0x10b02000 cur_addr:0x10e88000--1 [ 33.818314] healthd: battery l=100 v=0 t=42.4 h=2 st=2 chg=a [ 35.434600] acc_open [ 35.434684] acc_release [ 35.928622] phy_power_on: enable = 1 [ 35.928664] use internal PHY [ 35.964251] Read the Ethernet MAC address from IDB:68:1d:ef:0d:9b:cd [ 35.964311] eth0: device MAC address 68:1d:ef:0d:9b:cd [ 35.989972] libphy: stmmac: probed [ 35.990017] eth0: PHY ID 00000000 at 0 IRQ 0 (stmmac-0:00) active [ 35.990032] eth0: PHY ID 1234d400 at 1 IRQ POLL (stmmac-0:01) active [ 35.990044] PHY driver name: Rockchip integrated EPHY [ 35.990056] eth0: PHY ID 00000000 at 2 IRQ 0 (stmmac-0:02) [ 35.990070] eth0: PHY ID 00000000 at 3 IRQ 0 (stmmac-0:03) [ 35.990083] eth0: PHY ID 00000000 at 4 IRQ 0 (stmmac-0:04) [ 35.990095] eth0: PHY ID 00000000 at 5 IRQ 0 (stmmac-0:05) [ 35.990108] eth0: PHY ID 00000000 at 6 IRQ 0 (stmmac-0:06) [ 35.990121] eth0: PHY ID 00000000 at 7 IRQ 0 (stmmac-0:07) [ 35.990133] eth0: PHY ID 00000000 at 8 IRQ 0 (stmmac-0:08) [ 35.990145] eth0: PHY ID 00000000 at 9 IRQ 0 (stmmac-0:09) [ 35.990157] eth0: PHY ID 00000000 at 10 IRQ 0 (stmmac-0:0a) [ 35.990170] eth0: PHY ID 00000000 at 11 IRQ 0 (stmmac-0:0b) [ 35.990182] eth0: PHY ID 00000000 at 12 IRQ 0 (stmmac-0:0c) [ 35.990195] eth0: PHY ID 00000000 at 13 IRQ 0 (stmmac-0:0d) [ 35.990207] eth0: PHY ID 00000000 at 14 IRQ 0 (stmmac-0:0e) [ 35.990220] eth0: PHY ID 00000000 at 15 IRQ 0 (stmmac-0:0f) [ 35.990233] eth0: PHY ID 00000000 at 16 IRQ 0 (stmmac-0:10) [ 35.990245] eth0: PHY ID 00000000 at 17 IRQ 0 (stmmac-0:11) [ 35.990258] eth0: PHY ID 00000000 at 18 IRQ 0 (stmmac-0:12) [ 35.990270] eth0: PHY ID 00000000 at 19 IRQ 0 (stmmac-0:13) [ 35.990283] eth0: PHY ID 00000000 at 20 IRQ 0 (stmmac-0:14) [ 35.990296] eth0: PHY ID 00000000 at 21 IRQ 0 (stmmac-0:15) [ 35.990308] eth0: PHY ID 00000000 at 22 IRQ 0 (stmmac-0:16) [ 35.990321] eth0: PHY ID 00000000 at 23 IRQ 0 (stmmac-0:17) [ 35.990333] eth0: PHY ID 00000000 at 24 IRQ 0 (stmmac-0:18) [ 35.990346] eth0: PHY ID 00000000 at 25 IRQ 0 (stmmac-0:19) [ 35.990359] eth0: PHY ID 00000000 at 26 IRQ 0 (stmmac-0:1a) [ 35.990371] eth0: PHY ID 00000000 at 27 IRQ 0 (stmmac-0:1b) [ 35.990383] eth0: PHY ID 00000000 at 28 IRQ 0 (stmmac-0:1c) [ 35.990396] eth0: PHY ID 00000000 at 29 IRQ 0 (stmmac-0:1d) [ 35.990409] eth0: PHY ID 00000000 at 30 IRQ 0 (stmmac-0:1e) [ 35.990421] eth0: PHY ID 00000000 at 31 IRQ 0 (stmmac-0:1f) [ 36.699212] [ 36.699212] *****Aug 4 2020 16:43:39 EAGLE DRIVER VER:75be56bfbaf7***** [ 36.699212] [ 36.700052] request_init_conf: crystal_26M_en=1 [ 36.700076] request_init_conf: test_xtal=0 [ 36.700092] request_init_conf: sdio_configure=2 [ 36.700142] request_init_conf: bt_configure=0 [ 36.700163] request_init_conf: bt_protocol=0 [ 36.700178] request_init_conf: dual_ant_configure=0 [ 36.700191] request_init_conf: test_uart_configure=2 [ 36.700204] request_init_conf: share_xtal=0 [ 36.700217] request_init_conf: gpio_wake=0 [ 36.700229] request_init_conf: no_auto_sleep=0 [ 36.700241] request_init_conf: ext_rst=0 [ 36.700253] request_init_conf: wakeup_gpio=12 [ 36.700266] request_init_conf: ate_test=0 [ 36.700277] request_init_conf: speed_suspend=1 [ 36.700301] ======================================================= [ 36.700311] ==== Launching Wi-Fi driver! (Powered by Rockchip) ==== [ 36.700320] ======================================================= [ 36.700331] Espressif ESP8089 SDIO WiFi driver (Powered by Rockchip, Ver2.26(2016/05/20),Drv: 2.26) init. [ 36.700343] [WLAN_RFKILL]: rockchip_wifi_power: 0 [ 36.804354] [WLAN_RFKILL]: wifi shut off power. [ 36.804396] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 0 [ 36.804410] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled. [ 36.979848] [WLAN_RFKILL]: rockchip_wifi_power: 1 [ 36.979895] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1 [ 36.979908] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled. [ 37.087250] [WLAN_RFKILL]: wifi turn on power. 90 [ 37.087299] mmc2:mmc host rescan start! [ 37.087518] eagle_sdio_dummy: probe of mmc2:0001:1 failed with error -110 [ 37.209993] rk322x-lcdc vop0: win0:new_addr:0x10b02000 cur_addr:0x10e88000--1 [ 37.225667] dwc_otg_hcd_resume, usb device mode [ 37.226052] dwc_otg_hcd_suspend, usb device mode [ 37.285190] mmc2: card 0001 removed [ 37.303773] mmc_host mmc2: Bus speed (slot 0) = 37500000Hz (slot req 400000Hz, actual 398936HZ div = 47) [ 37.303827] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc2] [ 37.363275] mmc2 not switch iovel. [ 37.372033] mmc2: queuing unknown CIS tuple 0x01 (3 bytes) [ 37.380030] mmc2: queuing unknown CIS tuple 0x1a (5 bytes) [ 37.393992] mmc2: queuing unknown CIS tuple 0x1b (8 bytes) [ 37.395770] mmc_host mmc2: Bus speed (slot 0) = 37500000Hz (slot req 37500000Hz, actual 37500000HZ div = 0) [ 37.395824] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2] [ 37.396675] rk_sdmmc: BOOT Bus speed=37500000Hz,Bus width=4bits.[mmc2] [ 37.457761] mmc2: queuing unknown CIS tuple 0x80 (1 bytes) [ 37.457893] mmc2: queuing unknown CIS tuple 0x81 (1 bytes) [ 37.457982] mmc2: queuing unknown CIS tuple 0x82 (1 bytes) [ 37.458637] mmc2: new high speed SDIO card at address 0001 [ 37.459552] esp_sdio_dummy_probe enter [ 37.667783] esp_sdio_init power up OK [ 38.650754] esp_host:75be56bfbaf7 [ 38.650754] esp_target: 2cefb7b78636 77 18204 [ 38.650754] [ 38.652375] esp_readwrite_file: file /system/lib/modules/test_results filp_open error [ 38.655120] first normal exit [ 38.655706] esp_sdio_remove enter [ 38.656553] sif_disable_irq release irq failed [ 38.656993] mmc2:mmc host rescan start! [ 38.760033] mmc2:mmc host rescan start! [ 38.760271] eagle_sdio: probe of mmc2:0001:1 failed with error -110 [ 38.849133] mmc2: card 0001 removed [ 38.878117] mmc_host mmc2: Bus speed (slot 0) = 37500000Hz (slot req 400000Hz, actual 398936HZ div = 47) [ 38.878163] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc2] [ 38.918812] mmc2 not switch iovel. [ 38.923704] mmc2: queuing unknown CIS tuple 0x01 (3 bytes) [ 38.935624] mmc2: queuing unknown CIS tuple 0x1a (5 bytes) [ 38.939483] mmc2: queuing unknown CIS tuple 0x1b (8 bytes) [ 38.940778] mmc_host mmc2: Bus speed (slot 0) = 37500000Hz (slot req 37500000Hz, actual 37500000HZ div = 0) [ 38.940826] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2] [ 38.942731] rk_sdmmc: BOOT Bus speed=37500000Hz,Bus width=4bits.[mmc2] [ 38.944733] mmc2: queuing unknown CIS tuple 0x80 (1 bytes) [ 38.945530] mmc2: new high speed SDIO card at address 0001 [ 39.384694] Wifi Efuse Mac => 54:5a:a6:30:1a:a4 [ 39.384729] [WLAN_RFKILL]: rockchip_wifi_mac_addr: enter. [ 39.384735] esp_host:75be56bfbaf7 [ 39.384735] esp_target: 2cefb7b78636 77 18204 [ 39.384735] [ 39.384764] [WLAN_RFKILL]: get_wifi_addr_vendor_storage: rk_vendor_read wifi mac address failed (-1) [ 39.384783] [WLAN_RFKILL]: falsh wifi_custom_mac_addr=[00:00:00:00:00:00] [ 39.384796] [WLAN_RFKILL]: This mac address is not valid, ignored... [ 39.387547] Try to set ioctl callback [ 39.387573] interface name wlan0 [ 39.387582] dev name wlan0 [ 39.387591] Set Ioctl Function Callback [ 39.387599] interface name p2p0 [ 39.387607] dev name p2p0 [ 39.387616] Set Ioctl Function Callback [ 39.387627] esp_sdio: initializing netlink [ 39.670014] esp_op_add_interface STA [ 39.670275] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 39.677639] init: Starting service 'p2p_supp_esp'... [ 39.807680] rk322x-lcdc vop0: win0:new_addr:0x10b02000 cur_addr:0x10e88000--1 [ 40.418669] esp_op_add_interface STA [ 40.420019] IPv6: ADDRCONF(NETDEV_UP): p2p0: link is not ready [ 41.674249] init: write_file: Unable to open '/sys/devices/system/cpu/cpu4/cpufreq/scaling_min_freq': No such file or directory [ 41.699846] init: cannot find '/system/bin/glgps' (No such file or directory), disabling 'gpsd' [ 41.702485] init: Starting service 'exec 3 (/system/bin/bootstat)'... [ 41.756667] init: Service 'exec 3 (/system/bin/bootstat)' (pid 885) exited with status 0 [ 41.757745] init: Starting service 'exec 4 (/system/bin/bootstat)'... [ 41.786170] init: Service 'exec 4 (/system/bin/bootstat)' (pid 894) exited with status 0 [ 41.787198] init: Starting service 'exec 5 (/system/bin/bootstat)'... [ 41.829852] init: Service 'exec 5 (/system/bin/bootstat)' (pid 895) exited with status 0 [ 41.830890] init: Starting service 'exec 6 (/system/bin/bootstat)'... [ 42.013096] init: Service 'exec 6 (/system/bin/bootstat)' (pid 896) exited with status 0 [ 44.561056] init: Service 'bootanim' is being killed... [ 44.586610] init: Service 'bootanim' (pid 176) killed by signal 9 [ 48.357538] wlan0: authenticate with a0:65:18:aa:fa:9f [ 48.358421] wlan0: send auth to a0:65:18:aa:fa:9f (try 1/3) [ 48.362460] wlan0: authenticated [ 48.373800] wlan0: associate with a0:65:18:aa:fa:9f (try 1/3) [ 48.377539] wlan0: RX AssocResp from a0:65:18:aa:fa:9f (capab=0x11 status=0 aid=16) [ 48.377692] wlan0: associated [ 48.377983] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 48.380195] esp_op_ampdu_action RX START a0:65:18:aa:fa:9f tid 0 0 [ 49.062234] esp_op_ampdu_action RX START a0:65:18:aa:fa:9f tid 1 0 [ 49.153765] start tx ba session,addr:a0:65:18:aa:fa:9f,tid:1 [ 49.220081] esp_op_ampdu_action TX START, addr:a0:65:18:aa:fa:9f,tid:1,state:1 [ 49.221673] esp_op_ampdu_action TX OPERATION, addr:a0:65:18:aa:fa:9f,tid:1,state:2 [ 56.174301] qtaguid: ctrl_tag(t -1 3458768941931823104 -1): failed to lookup sock_fd=-1 err=-9 pid=1232 tgid=797 uid=10010 [ 56.177443] start tx ba session,addr:a0:65:18:aa:fa:9f,tid:0 [ 56.206869] esp_op_ampdu_action TX START, addr:a0:65:18:aa:fa:9f,tid:0,state:1 [ 56.208720] esp_op_ampdu_action TX OPERATION, addr:a0:65:18:aa:fa:9f,tid:0,state:2 [ 60.538024] force_usb_mode_store 0->1 [ 60.637507] Using Buffer DMA mode [ 60.637551] Periodic Transfer Interrupt Enhancement - disabled [ 60.637563] Multiprocessor Interrupt Enhancement - disabled [ 60.637575] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 60.637586] ^^^^^^^^^^^^^^^^^^Host Mode [ 60.683680] Init: Power Port (0) [ 60.683808] 30040000.otg resume, HPRT0:0x1000 [ 60.684348] 30040000.otg suspend, HPRT0:0x1000 [ 62.877411] esp_op_ampdu_action RX START a0:65:18:aa:fa:9f tid 4 0 [ 77.566830] binder: 797: binder_alloc_buf size 1056768 failed, no address space [ 77.566899] binder: 1073:1598 transaction failed 29201, size 1056768-0 [ 271.342346] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead. [ 298.093176] ........key_timer_func And when flash armbian: DDR Version V1.10 20190926 In ID:0xFFF unknow device ERR Some image: https://drive.google.com/file/d/108AjAhe43UYbFO6yjalZATMmx5PqeVjI/view https://drive.google.com/file/d/101P8nWXoasDUqAlbsHjxg4CbKjCYgjvp/view?usp=sharing] https://drive.google.com/file/d/100TjHiN-FLp0UtJjVYp9u0mUSRbcQXTR/view?usp=sharing https://drive.google.com/file/d/10-a1Xr0dAXy-2OgsLMVKCjocWh03_zrh/view?usp=sharing https://drive.google.com/file/d/1-p9jXeCyiqnPFe9KINODN5oANLszQX-P/view
  7. log show 9 apr 2020, but i dont have rom that at 9 apr, perhap it show that because i get it from multitool bash shell, i alway boot with multitool and install with first page instructions. i flashed many box with rk322x but that box is new version with emcp not with emmc and ram separate, and failed :(. after flash and shutdown it cant boot and only go to Mask Rom mode flash one rom with rk322x ( I use H96 Mini H8 rom ) , it can boot and i use Multitool to restore orginal ROM. Perhap i must use libreelec temporary with that box version. thx
  8. still bricked, only blue led light and must recover by Mask rom. I compare two dmesg log when up android rom and armbian rom that u just post, they differ in the order in which they load : mmc_host mmc. thx dmesg_original_rom.log dmesg_Armbian_21.05.0-trunk.log dmesg_android rom use MASKROM(H96mini).log dmesg_Armbian_downloadfromwebsite.log
  9. thx, i used mask rom to restore rom. but i flashed 4 file armbian to emmc and sdcard but still cant boot , I flash LibreELEC to sdcard can boot. my box use rk3228A, Esp8089 Wifi and Emcp BiWin, Board: MXQ_RK3229_EMCP_V4.0. Dmesg.log
  10. i had a backup file when run multitool, now im bricked, how to backup to origin with that file ?