Jump to content

Dmitri_B

Members
  • Posts

    2
  • Joined

  • Last visited

  1. Stupid me bridged eth0 instead of eth0.vlan Sorry guys.
  2. Hello folks. Trying to set up bridged AP on armbian ZeroPI box. Configuring wlan for AP: cat /etc/hostapd/hostapd.conf ssid=Wifi2 interface=wlan0 hw_mode=g channel=9 bridge=br0 driver=nl80211 logger_syslog=0 logger_syslog_level=0 wmm_enabled=0 wpa=2 preamble=1 wpa_psk=66eb31d2b48d19ba216f2e50c6831ee11be98e2fa3a8075e30b866f4a5ccda27 wpa_passphrase=12345678 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP auth_algs=1 macaddr_acl=0 ### IEEE 802.11n #ieee80211n=1 #ht_capab= #country_code=US #ieee80211d=1 ### IEEE 802.11n ### IEEE 802.11a #hw_mode=a ### IEEE 802.11a ### IEEE 802.11ac #ieee80211ac=1 #vht_capab=[MAX-MPDU-11454][SHORT-GI-80][TX-STBC-2BY1][RX-STBC-1][MAX-A-MPDU-LEN-EXP3] #vht_oper_chwidth=1 #vht_oper_centr_freq_seg0_idx=42 ### IEEE 802.11ac # controlling enabled ctrl_interface=/var/run/hostapd ctrl_interface_group=0 adding wlan to bridge: cat /etc/network/interfaces source /etc/network/interfaces.d/* # Network is managed by Network manager auto lo iface lo inet loopback # wireless wlan0 allow-hotplug wlan0 iface wlan0 inet manual # eth0 connected to the ISP router allow-hotplug eth0 iface eth0 inet manual # bridge iface br0 inet static bridge_ports wlan0 eth0 address 10.255.194.10 netmask 255.255.255.240 gateway 10.255.194.1 dns-nameservers 8.8.8.8 1.1.1.1 Till now I can see Wii2 ssid and can connect to it but impossible to get IP via LAN dhcp server. Any good ideas ? RGDS
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines