Hey,guys.I get a TV/box which use S905L-3 CPU,but I can't install any version of armbian.It always like this(any version) bable150's builds.
maybe try other .dtbs ?
here is the entire logs.
btw,I use tll to flash.
~~~
GXLX2:BL1:3cfee7:42a5ae;FEAT:ADFC318C:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
TE: 78176
BL2 Built : 14:48:45, Sep 26 2018.
gxl g6d68897 - yao.zhang@droid07
Board ID = 4, adc=302
set vcck to 1070 mv
set vddee to 1070 mv
CPU clk: 1200MHz
DDR3
DDR3 chl: Rank0+1 @ 792MHz - FAIL
DDR3 chl: Rank0 @ 792MHz
bist_test rank: 0 2a 06 4e 3a 17 5d 24 00 49 3e 1c 61 24 01 47 3a 17 5e 28 02 4f 3a 16 5f 618 - PASS
Rank0: 2048MB(auto)-2T-11
AddrBus test pass!
-s
Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
New fip structure!
Load bl30 from eMMC, src: 0x00010200, des: 0x013c0000, size: 0x00007600
Load bl301 from eMMC, src: 0x00018200, des: 0x01380000, size: 0x00002200
Load bl31 from eMMC, src: 0x0001c200, des: 0x10100000, size: 0x00019600
Load bl33 from eMMC, src: 0x00038200, des: 0x01000000, size: 0x00047400
NOTICE: BL3-1: v1.0(debug):361f8a7
NOTICE: BL3-1: Built : 16:43:26, Dec 19 2018
NOTICE: BL31: GXL normal boot!
NOTICE: BL31: BL33 decompress pass
[Image: gxl_v1.1.3103-9234004 2018-12-27 10:43:23 yao.zhang@droid07]
efuse init ops = c5
efuse init hdcp = c, cf9=7
x2_hp_e = 0
bl30: check_permit, count is 1
bl30: check_permit: ok!
chipid: 0 0 3 c c 0 ad b3 60 a0 0 c5 not ES chip
[0.561599 Inits done]
INFO: BL3-1: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader
ERROR: Error initializing runtime service opteed_fast
INFO: BL3-1: Preparing for EL3 exit to normal world
INFO: BL3-1: Next image address = 0x1000000
INFO: BL3-1: Next image spsr = 0x3c9
DRAM:
MMC: In: Out: Err: wipe_data=successfulSecd
wipe_cache=successful
upgrade_step=2
[BL31]: tee size: 0
rebootmode=cold_boot
Starting the controller
()
start amlogic old u-boot
()
[BL31]: tee size: 0
[BL31]: tee size: 0
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 5.9.0-arm-64 (root@vbox) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #20.10 SMP PREEMPT Wed Oct 14 12:04:42 MSK 2020
[ 0.000000] Machine model: Amlogic Meson GXL (S905X) P212 Development Board
[ 0.000000] efi: UEFI not found.
[ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000006b400000, size 256 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000001000000-0x000000007fffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x7fbf1100-0x7fbf2fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000001000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000001000000-0x0000000004ffffff]
[ 0.000000] node 0: [mem 0x0000000007300000-0x000000000fffffff]
[ 0.000000] node 0: [mem 0x0000000010200000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000001000000-0x000000007fffffff]
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv0.2 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] percpu: Embedded 22 pages/cpu s51480 r8192 d30440 u90112
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 502592
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyAML0,115200n8 console=tty0 no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0x3bfff000-0x3ffff000] (64MB)
[ 0.000000] Memory: 1636236K/2042880K available (16188K kernel code, 1308K rwdata, 6464K rodata, 3392K init, 927K bss, 144500K reserved, 262144K cma-reserved)
[ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x80/0x150 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
[ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.000314] Console: colour dummy device 80x25
[ 0.000733] printk: console [tty0] enabled
[ 0.000834] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[ 0.000855] pid_max: default: 32768 minimum: 301
[ 0.000960] LSM: Security Framework initializing
[ 0.001062] AppArmor: AppArmor initialized
[ 0.001120] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001143] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.002525] rcu: Hierarchical SRCU implementation.
[ 0.003476] EFI services will not be available.
[ 0.003771] smp: Bringing up secondary CPUs ...
[ 0.004348] Detected VIPT I-cache on CPU1
[ 0.004406] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.004948] Detected VIPT I-cache on CPU2
[ 0.004996] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.005527] Detected VIPT I-cache on CPU3
[ 0.005572] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.005647] smp: Brought up 1 node, 4 CPUs
[ 0.005710] SMP: Total of 4 processors activated.
[ 0.005721] CPU features: detected: 32-bit EL0 Support
[ 0.005733] CPU features: detected: CRC32 instructions
[ 0.015612] CPU: All CPU(s) started at EL2
[ 0.015671] alternatives: patching kernel code
[ 0.016973] devtmpfs: initialized
[ 0.022355] Registered cp15_barrier emulation handler
[ 0.022386] Registered setend emulation handler
[ 0.022401] KASLR disabled due to lack of seed
[ 0.022746] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.022780] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.029913] xor: measuring software checksum speed
[ 0.068170] 8regs : 2373.000 MB/sec
[ 0.108202] 32regs : 2723.000 MB/sec
[ 0.148242] arm64_neon: 2310.000 MB/sec
[ 0.148253] xor: using function: 32regs (2723.000 MB/sec)
[ 0.148312] pinctrl core: initialized pinctrl subsystem
[ 0.148865] DMI not present or invalid.
[ 0.149364] NET: Registered protocol family 16
[ 0.150931] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[ 0.151000] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.151141] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.151242] audit: initializing netlink subsys (disabled)
[ 0.151464] audit: type=2000 audit(0.148:1): state=initialized audit_enabled=0 res=1
[ 0.152504] thermal_sys: Registered thermal governor 'step_wise'
[ 0.152751] cpuidle: using governor ladder
[ 0.152790] cpuidle: using governor menu
[ 0.153123] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.153216] ASID allocator initialised with 65536 entries
[ 0.154030] Serial: AMBA PL011 UART driver
[ 0.179058] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.179084] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.179097] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.179110] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.180967] cryptd: max_cpu_qlen set to 1000
[ 0.248474] raid6: neonx8 gen() 2146 MB/s
[ 0.316517] raid6: neonx8 xor() 1608 MB/s
[ 0.384577] raid6: neonx4 gen() 2192 MB/s
[ 0.452625] raid6: neonx4 xor() 1590 MB/s
[ 0.520677] raid6: neonx2 gen() 2096 MB/s
[ 0.588734] raid6: neonx2 xor() 1479 MB/s
[ 0.656785] raid6: neonx1 gen() 1826 MB/s
[ 0.724839] raid6: neonx1 xor() 1249 MB/s
[ 0.792894] raid6: int64x8 gen() 1491 MB/s
[ 0.860964] raid6: int64x8 xor() 784 MB/s
[ 0.929012] raid6: int64x4 gen() 1667 MB/s
[ 0.997054] raid6: int64x4 xor() 839 MB/s
[ 1.065115] raid6: int64x2 gen() 1420 MB/s
[ 1.133166] raid6: int64x2 xor() 730 MB/s
[ 1.201225] raid6: int64x1 gen() 1060 MB/s
[ 1.269276] raid6: int64x1 xor() 559 MB/s
[ 1.269286] raid6: using algorithm neonx4 gen() 2192 MB/s
[ 1.269295] raid6: .... xor() 1590 MB/s, rmw enabled
[ 1.269306] raid6: using neon recovery algorithm
[ 1.269780] ACPI: Interpreter disabled.
[ 1.270894] iommu: Default domain type: Translated
[ 1.271149] vgaarb: loaded
[ 1.271706] SCSI subsystem initialized
[ 1.272131] usbcore: registered new interface driver usbfs
[ 1.272182] usbcore: registered new interface driver hub
[ 1.272247] usbcore: registered new device driver usb
[ 1.272652] pps_core: LinuxPPS API ver. 1 registered
[ 1.272665] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.272689] PTP clock support registered
[ 1.272725] EDAC MC: Ver: 3.0.0
[ 1.273569] FPGA manager framework
[ 1.273674] Advanced Linux Sound Architecture Driver Initialized.
[ 1.274228] NetLabel: Initializing
[ 1.274243] NetLabel: domain hash size = 128
[ 1.274252] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 1.274303] NetLabel: unlabeled traffic allowed by default
[ 1.274823] clocksource: Switched to clocksource arch_sys_counter
[ 1.275096] VFS: Disk quotas dquot_6.6.0
[ 1.275158] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.275283] FS-Cache: Loaded
[ 1.275760] AppArmor: AppArmor Filesystem Enabled
[ 1.276000] pnp: PnP ACPI: disabled
[ 1.281115] NET: Registered protocol family 2
[ 1.281640] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 1.281690] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 1.281808] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[ 1.282018] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.282179] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 1.282235] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 1.282444] NET: Registered protocol family 1
[ 1.282935] RPC: Registered named UNIX socket transport module.
[ 1.282956] RPC: Registered udp transport module.
[ 1.282965] RPC: Registered tcp transport module.
[ 1.282974] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.282991] NET: Registered protocol family 44
[ 1.283011] PCI: CLS 0 bytes, default 64
[ 1.283215] Trying to unpack rootfs image as initramfs...
[ 1.701209] Freeing initrd memory: 9776K
[ 1.702103] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 1.705606] Initialise system trusted keyrings
[ 1.705807] workingset: timestamp_bits=44 max_order=19 bucket_order=0
[ 1.710462] zbud: loaded
[ 1.711820] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.712099] FS-Cache: Netfs 'nfs' registered for caching
[ 1.712645] NFS: Registering the id_resolver key type
[ 1.712680] Key type id_resolver registered
[ 1.712690] Key type id_legacy registered
[ 1.712781] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.712795] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 1.713790] FS-Cache: Netfs 'cifs' registered for caching
[ 1.714087] Key type cifs.spnego registered
[ 1.714115] Key type cifs.idmap registered
[ 1.714138] ntfs: driver 2.1.32 [Flags: R/W].
[ 1.714674] JFS: nTxBlock = 8192, nTxLock = 65536
[ 1.719140] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
[ 1.720613] ocfs2: Registered cluster interface o2cb
[ 1.720818] OCFS2 User DLM kernel interface loaded
[ 1.722462] gfs2: GFS2 installed
[ 1.759528] NET: Registered protocol family 38
[ 1.759560] Key type asymmetric registered
[ 1.759571] Asymmetric key parser 'x509' registered
[ 1.759580] Asymmetric key parser 'pkcs8' registered
[ 1.759648] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 1.759807] io scheduler mq-deadline registered
[ 1.759821] io scheduler kyber registered
[ 1.759980] io scheduler bfq registered
[ 1.773764] soc soc0: Amlogic Meson Unknown (Unknown) Revision 2a:e (c5:2) Detected
[ 1.777799] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
[ 1.779723] Serial: AMBA driver
[ 1.780117] c11084c0.serial: ttyAML6 at MMIO 0xc11084c0 (irq = 12, base_baud = 1500000) is a meson_uart
[ 1.780283] serial serial0: tty port ttyAML6 registered
[ 1.780678] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 15, base_baud = 1500000) is a meson_uart
[ 2.847999] printk: console [ttyAML0] enabled
[ 2.865417] brd: module loaded
[ 2.873312] loop: module loaded
[ 2.874139] Loading iSCSI transport class v2.0-870.
[ 2.876270] iscsi: registered transport (tcp)
[ 2.883855] libphy: Fixed MDIO Bus: probed
[ 2.885796] VFIO - User Level meta-driver version: 0.3
[ 2.890545] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.895627] ehci-pci: EHCI PCI platform driver
[ 2.900060] ehci-platform: EHCI generic platform driver
[ 2.905334] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.911326] ohci-pci: OHCI PCI platform driver
[ 2.915760] ohci-platform: OHCI generic platform driver
[ 2.921396] usbcore: registered new interface driver usb-storage
[ 2.927045] mousedev: PS/2 mouse device common for all mice
[ 2.933275] i2c /dev entries driver
[ 2.939691] sdhci: Secure Digital Host Controller Interface driver
[ 2.941910] sdhci: Copyright(c) Pierre Ossman
[ 2.946413] Synopsys Designware Multimedia Card Interface Driver
[ 2.959756] meson-gx-mmc d0072000.mmc: Got CD GPIO
[ 2.987363] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
[ 3.012688] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.013775] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.019530] meson-sm: secure-monitor enabled
[ 3.023827] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 3.031058] gxl-crypto c883e000.crypto: will run requests pump with realtime priority
[ 3.039176] hid: raw HID events driver (C) Jiri Kosina
[ 3.043934] usbcore: registered new interface driver usbhid
[ 3.049144] usbhid: USB HID core driver
[ 3.053695] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
[BL31]: tee size: 0
[ 3.064543] no UART detected at 0x1
[ 3.068896] NET: Registered protocol family 17
[ 3.069570] Key type dns_resolver registered
[ 3.074186] registered taskstats version 1
[ 3.077705] Loading compiled-in X.509 certificates
[ 3.082527] zswap: loaded using pool lzo/zbud
[ 3.087026] Key type ._fscrypt registered
[ 3.090666] Key type .fscrypt registered
[ 3.094561] Key type fscrypt-provisioning registered
[ 3.100278] Btrfs loaded, crc32c=crc32c-generic
[ 3.120818] Key type encrypted registered
[ 3.120866] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.141103] meson-drm d0100000.vpu: Queued 3 outputs on vpu
[ 3.143099] mmc1: new HS200 MMC card at address 0001
[ 3.146699] mmcblk1: mmc1:0001 Biwin 6.96 GiB
[ 3.150804] mmcblk1boot0: mmc1:0001 Biwin partition 1 4.00 MiB
[ 3.156636] mmcblk1boot1: mmc1:0001 Biwin partition 2 4.00 MiB
[ 3.162383] mmcblk1rpmb: mmc1:0001 Biwin partition 3 4.00 MiB, chardev (241:0)
[ 3.166912] meson-dw-hdmi c883a000.hdmi-tx: Unsupported HDMI controller (0d0d:0d:0d)
[ 3.177338] ------------[ cut here ]------------
[ 3.181691] WARNING: CPU: 3 PID: 33 at drivers/regulator/core.c:2089 _regulator_put.part.0+0x154/0x160
[ 3.190905] Modules linked in:
[ 3.193927] CPU: 3 PID: 33 Comm: kworker/3:1 Not tainted 5.9.0-arm-64 #20.10
[ 3.200910] Hardware name: Amlogic Meson GXL (S905X) P212 Development Board (DT)
[ 3.208250] Workqueue: events deferred_probe_work_func
[ 3.213332] pstate: 80000005 (Nzcv daif -PAN -UAO BTYPE=--)
[ 3.218851] pc : _regulator_put.part.0+0x154/0x160
[ 3.223595] lr : regulator_put+0x38/0x50
[ 3.227475] sp : ffff800010143930
[ 3.230752] x29: ffff800010143930 x28: ffff800012a07000
[ 3.236013] x27: ffff80001010bcd8 x26: 00000000ffffffed
[ 3.241274] x25: ffff00007f6bd000 x24: ffff00006988c000
[ 3.246535] x23: 0000000000000010 x22: ffff8000101439e8
[ 3.251796] x21: ffff00007f678e00 x20: ffff800012ad7150
[ 3.257058] x19: ffff00006a0f5900 x18: 0000000000000010
[ 3.262319] x17: 0000000000006a0c x16: 000000000000698c
[ 3.267580] x15: ffff00007f679268 x14: 000000000000034f
[ 3.272841] x13: 0000000000000000 x12: 0000000000000001
[ 3.278103] x11: 0000000000000000 x10: 00000000000009c0
[ 3.283364] x9 : ffff800010143760 x8 : 0000000000000000
[ 3.288625] x7 : ffff00007f678e00 x6 : 0000000000000000
[ 3.293886] x5 : 0000000000000001 x4 : 0000000000000000
[ 3.299148] x3 : ffff800012ad7520 x2 : ffff00007f678e00
[ 3.304409] x1 : 0000000000000000 x0 : 0000000000000001
[ 3.309671] Call trace:
[ 3.312089] _regulator_put.part.0+0x154/0x160
[ 3.316486] regulator_put+0x38/0x50
[ 3.320024] devm_regulator_release+0x14/0x20
[ 3.324337] release_nodes+0x1b0/0x228
[ 3.328044] devres_release_group+0x90/0xe8
[ 3.332184] component_bind_all+0x114/0x260
[ 3.336325] meson_drv_bind_master+0x364/0x488
[ 3.340722] meson_drv_bind+0x14/0x28
[ 3.344345] try_to_bring_up_master+0x168/0x1d0
[ 3.348830] component_master_add_with_match+0xb4/0x100
[ 3.354005] meson_drv_probe+0xd4/0x128
[ 3.357800] platform_drv_probe+0x54/0xa8
[ 3.361767] really_probe+0xe4/0x3b0
[ 3.365303] driver_probe_device+0x58/0xb8
[ 3.369357] __device_attach_driver+0x84/0xc8
[ 3.373671] bus_for_each_drv+0x78/0xc8
[ 3.377464] __device_attach+0xf0/0x150
[ 3.381260] device_initial_probe+0x14/0x20
[ 3.385401] bus_probe_device+0x9c/0xa8
[ 3.389196] deferred_probe_work_func+0x74/0xb0
[ 3.393683] process_one_work+0x1a0/0x328
[ 3.397647] worker_thread+0x1f8/0x420
[ 3.401357] kthread+0x140/0x160
[ 3.404549] ret_from_fork+0x10/0x34
[ 3.408083] ---[ end trace 275a17427592d210 ]---
[ 3.412829] meson-drm d0100000.vpu: failed to bind c883a000.hdmi-tx (ops meson_dw_hdmi_ops): -19
[ 3.421387] meson-drm d0100000.vpu: Couldn't bind all components
[ 3.427630] meson-drm d0100000.vpu: master bind failed: -19
[ 3.434800] meson8b-dwmac c9410000.ethernet: IRQ eth_wake_irq not found
[ 3.439438] meson8b-dwmac c9410000.ethernet: IRQ eth_lpi not found
[ 3.445623] meson8b-dwmac c9410000.ethernet: PTP uses main clock
[ 3.451479] meson8b-dwmac c9410000.ethernet: no reset control found
[ 3.458414] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
[ 3.464839] meson8b-dwmac c9410000.ethernet: DWMAC1000
[ 3.469933] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
[ 3.477349] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
[ 3.484765] meson8b-dwmac c9410000.ethernet: COE Type 2
[ 3.489940] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
[ 3.496926] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
[ 3.503383] meson8b-dwmac c9410000.ethernet: Normal descriptors
[ 3.509175] meson8b-dwmac c9410000.ethernet: Ring mode enabled
[ 3.514953] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 3.523280] libphy: stmmac: probed
[ 3.527623] dwc3-meson-g12a d0078080.usb: USB2 ports: 2
[ 3.531461] dwc3-meson-g12a d0078080.usb: USB3 ports: 0
[ 4.067920] dwc2 c9100000.usb: supply vusb_d not found, using dummy regulator
[ 4.069547] dwc2 c9100000.usb: supply vusb_a not found, using dummy regulator
[ 4.076768] dwc2 c9100000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
[ 4.085114] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.088976] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 4.096659] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010
[ 4.105876] xhci-hcd xhci-hcd.0.auto: irq 42, io mem 0xc9000000
[ 4.111985] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[ 4.119892] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.127046] usb usb1: Product: xHCI Host Controller
[ 4.131875] usb usb1: Manufacturer: Linux 5.9.0-arm-64 xhci-hcd
[ 4.137739] usb usb1: SerialNumber: xhci-hcd.0.auto
[ 4.143093] hub 1-0:1.0: USB hub found
[ 4.146296] hub 1-0:1.0: 2 ports detected
[ 4.150556] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.155709] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 4.163282] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 4.169788] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.177848] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.09
[ 4.185956] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.193115] usb usb2: Product: xHCI Host Controller
[ 4.197942] usb usb2: Manufacturer: Linux 5.9.0-arm-64 xhci-hcd
[ 4.203807] usb usb2: SerialNumber: xhci-hcd.0.auto
[ 4.209092] hub 2-0:1.0: USB hub found
[ 4.212378] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 4.222038] meson-gx-mmc d0070000.mmc: allocated mmc-pwrseq
[ 4.253124] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
get_dvfs_info 0007
[ 4.273320] mmc2: new high speed SDIO card at address 8800
[ 4.274132] libphy: mdio_mux: probed
[ 4.284942] libphy: mdio_mux: probed
[ 4.287107] printk: console [netcon0] enabled
[ 4.287211] netconsole: network logging started
[ 4.293121] ALSA device list:
[ 4.294632] No soundcards found.
[ 4.299351] Freeing unused kernel memory: 3392K
[ 4.315045] Run /init as init process
[ 4.482900] usb 1-2: new high-speed USB device number 2 using xhci-hcd
[ 4.635945] usb 1-2: New USB device found, idVendor=14cd, idProduct=2536, bcdDevice= 3.00
[ 4.638490] usb 1-2: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 4.645616] usb 1-2: Product: Mass Storage Device
[ 4.650283] usb 1-2: Manufacturer: Generic USB Device
[ 4.655675] usb 1-2: SerialNumber: 2536201609180000
[ 4.661592] usb-storage 1-2:1.0: USB Mass Storage device detected
[ 4.667246] scsi host0: usb-storage 1-2:1.0
[ 4.675006] usbcore: registered new interface driver uas
[ 4.779916] random: fast init done
[ 5.702412] scsi 0:0:0:0: Direct-Access Mass Storage Device 1.00 PQ: 0 ANSI: 0 CCS
[ 5.710995] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.711340] sd 0:0:0:0: [sda] 15376384 512-byte logical blocks: (7.87 GB/7.33 GiB)
[ 5.718487] sd 0:0:0:0: [sda] Write Protect is off
[ 5.723142] sd 0:0:0:0: [sda] No Caching mode page found
[ 5.728205] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 5.770207] sda: sda1 sda2
[ 5.772393] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 6.452397] EXT4-fs (sda2): mounted filesystem with writeback data mode. Opts: data=writeback
[ 7.369066] systemd[1]: System time before build time, advancing clock.
[ 7.471859] NET: Registered protocol family 10
[ 7.503486] Segment Routing with IPv6
[ 7.545592] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 7.561824] systemd[1]: Detected architecture arm64.
[ 7.601490] systemd[1]: Set hostname to <arm-64>.
[ 8.079100] systemd[1]: /etc/systemd/system/serial-getty@.service.d/override.conf:5: Unknown lvalue 'After' in section 'Service', ignoring
[ 8.091397] systemd[1]: /etc/systemd/system/serial-getty@.service.d/override.conf:5: Unknown lvalue 'After' in section 'Service', ignoring
[ 8.104543] systemd[1]: /etc/systemd/system/getty@.service.d/override.conf:5: Unknown lvalue 'After' in section 'Service', ignoring
[ 8.193816] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.203411] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.205220] systemd[1]: Listening on Journal Socket.
[ 8.210065] random: systemd: uninitialized urandom read (16 bytes read)
[ 8.216505] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.228061] systemd[1]: Mounting POSIX Message Queue File System...
[ 8.230480] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 8.334724] EXT4-fs (sda2): re-mounted. Opts: commit=600,errors=remount-ro
[ 10.629599] SError Interrupt on CPU2, code 0xbf000002 -- SError
[ 10.629603] CPU: 2 PID: 357 Comm: systemd-udevd Tainted: G W 5.9.0-arm-64 #20.10
[ 10.629605] Hardware name: Amlogic Meson GXL (S905X) P212 Development Board (DT)
[ 10.629607] pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--)
[ 10.629608] pc : el1_sync_handler+0xf8/0x130
[ 10.629610] lr : el1_sync+0x7c/0x100
[ 10.629611] sp : ffff8000103a3750
[ 10.629613] x29: ffff8000103a3750 x28: ffff00007cc17000
[ 10.629616] x27: 0000000000000100 x26: 0000000000000000
[ 10.629620] x25: 0000000000000001 x24: ffff80000a215270
[ 10.629623] x23: 0000000080000005 x22: ffff80000a20af08
[ 10.629626] x21: ffff8000103a38a0 x20: 0000ffffffffffff
[ 10.629629] x19: ffff00006b1d8148 x18: 0000000000000001
[ 10.629632] x17: 0000000000000000 x16: 0000000000000000
[ 10.629636] x15: ffff00007cc17468 x14: ffffffffffffffff
[ 10.629639] x13: 0000000000000020 x12: 0101010101010101
[ 10.629642] x11: 0000000000000040 x10: ffff800012a37ef8
[ 10.629645] x9 : ffff800012a37ef0 x8 : ffff00007f0026f0
[ 10.629649] x7 : 0000000000000000 x6 : 0000000000000000
[ 10.629652] x5 : ffff00007f0026c8 x4 : ffff800010c46000
[ 10.629655] x3 : 0000000096000210 x2 : 0000002200000000
[ 10.629658] x1 : 0000000000000000 x0 : ffff8000103a3760
[ 10.629662] Kernel panic - not syncing: Asynchronous SError Interrupt
[ 10.629665] CPU: 2 PID: 357 Comm: systemd-udevd Tainted: G W 5.9.0-arm-64 #20.10
[ 10.629667] Hardware name: Amlogic Meson GXL (S905X) P212 Development Board (DT)
[ 10.629668] Call trace:
[ 10.629669] dump_backtrace+0x0/0x1a0
[ 10.629671] show_stack+0x18/0x28
[ 10.629672] dump_stack+0xc0/0x11c
[ 10.629673] panic+0x15c/0x31c
[ 10.629674] nmi_panic+0x8c/0x90
[ 10.629676] arm64_serror_panic+0x78/0x84
[ 10.629677] do_serror+0x78/0x180
[ 10.629678] el1_error+0x8c/0x108
[ 10.629680] el1_sync_handler+0xf8/0x130
[ 10.629681] el1_sync+0x7c/0x100
[ 10.629682] lima_mmu_init+0x40/0x118 [lima]
[ 10.629684] lima_device_init+0x1b8/0x5f0 [lima]
[ 10.629685] lima_pdev_probe+0xa0/0x190 [lima]
[ 10.629686] platform_drv_probe+0x54/0xa8
[ 10.629688] really_probe+0xe4/0x3b0
[ 10.629689] driver_probe_device+0x58/0xb8
[ 10.629690] device_driver_attach+0x74/0x80
[ 10.629692] __driver_attach+0x58/0xe0
[ 10.629693] bus_for_each_dev+0x70/0xc0
[ 10.629694] driver_attach+0x24/0x30
[ 10.629695] bus_add_driver+0x14c/0x1f0
[ 10.629697] driver_register+0x64/0x120
[ 10.629698] __platform_driver_register+0x48/0x58
[ 10.629700] lima_platform_driver_init+0x24/0x1000 [lima]
[ 10.629701] do_one_initcall+0x54/0x1bc
[ 10.629702] do_init_module+0x54/0x200
[ 10.629704] load_module+0x1de8/0x23f0
[ 10.629705] __do_sys_finit_module+0xd8/0xf0
[ 10.629707] __arm64_sys_finit_module+0x20/0x30
[ 10.629708] el0_svc_common.constprop.0+0x74/0x1f0
[ 10.629709] do_el0_svc+0x24/0x90
[ 10.629711] el0_sync_handler+0x180/0x2f8
[ 10.629712] el0_sync+0x158/0x180
[ 10.629733] SMP: stopping secondary CPUs
[ 10.629735] Kernel Offset: disabled
[ 10.629736] CPU features: 0x0040002,20002004
[ 10.629737] Memory Limit: none
~~~
thanks for your reply!