Kamileon

Tried to build Armbian for opi 3 lts from git and i get error: AR drivers/net/built-in.a AR drivers/built-in.a GEN .version CHK include/generated/compile.h LD vmlinux.o MODPOST vmlinux.symvers MODINFO modules.builtin.modinfo GEN modules.builtin LD .tmp_vmlinux.kallsyms1 [ error ] ERROR in function compile_kernel [ main.sh:589 -> main.sh:490 -> compilation.sh:507 -> general.sh:0 ] [ error ] Kernel was not built [ @host ] Debian 11 server normal

Audio from Jack output works for me did speaker-test aplay -L null Discard all samples (playback) or generate zero samples (capture) samplerate Rate Converter Plugin Using Samplerate Library speexrate Rate Converter Plugin Using Speex Resampler jack JACK Audio Connection Kit oss Open Sound System pulse PulseAudio Sound Server upmix Plugin for channel upmix (4,6,8) vdownmix Plugin for channel downmix (stereo) with a simple spacialization default:CARD=allwinnerac200c allwinner,ac200-codec, 508f000.i2s-acx00-dai acx00-codec-0 Default Audio Device sysdefault:CARD=allwinnerac200c allwinner,ac200-codec, 508f000.i2s-acx00-dai acx00-codec-0 Default Audio Device dmix:CARD=allwinnerac200c,DEV=0 allwinner,ac200-codec, 508f000.i2s-acx00-dai acx00-codec-0 Direct sample mixing device dsnoop:CARD=allwinnerac200c,DEV=0 allwinner,ac200-codec, 508f000.i2s-acx00-dai acx00-codec-0 Direct sample snooping device hw:CARD=allwinnerac200c,DEV=0 allwinner,ac200-codec, 508f000.i2s-acx00-dai acx00-codec-0 Direct hardware device without any conversions plughw:CARD=allwinnerac200c,DEV=0 allwinner,ac200-codec, 508f000.i2s-acx00-dai acx00-codec-0 Hardware device with all software conversions usbstream:CARD=allwinnerac200c allwinner,ac200-codec USB Stream Output default:CARD=sun9ihdmi sun9i-hdmi, SUN9I-HDMI PCM i2s-hifi-0 Default Audio Device sysdefault:CARD=sun9ihdmi sun9i-hdmi, SUN9I-HDMI PCM i2s-hifi-0 Default Audio Device dmix:CARD=sun9ihdmi,DEV=0 sun9i-hdmi, SUN9I-HDMI PCM i2s-hifi-0 Direct sample mixing device dsnoop:CARD=sun9ihdmi,DEV=0 sun9i-hdmi, SUN9I-HDMI PCM i2s-hifi-0 Direct sample snooping device hw:CARD=sun9ihdmi,DEV=0 sun9i-hdmi, SUN9I-HDMI PCM i2s-hifi-0 Direct hardware device without any conversions plughw:CARD=sun9ihdmi,DEV=0 sun9i-hdmi, SUN9I-HDMI PCM i2s-hifi-0 Hardware device with all software conversions usbstream:CARD=sun9ihdmi sun9i-hdmi USB Stream Output root@orangepi3-lts:~# speaker-test speaker-test 1.2.2 Playback device is default Stream parameters are 48000Hz, S16_LE, 1 channels Using 16 octaves of pink noise Rate set to 48000Hz (requested 48000Hz) Buffer size range from 256 to 262144 Period size range from 128 to 32768 Using max buffer size 262144 Periods = 4 was set period_size = 32768 was set buffer_size = 262144 0 - Front Left Time per period = 2.740674 0 - Front Left Time per period = 2.757094 0 - Front Left Time per period = 2.740576

Boots on my end also Ethernet works root@orangepi3-lts ------------------ █ █ █ █ █ █ █ █ █ █ █ OS: Armbian (22.05.0-trunk) aarch64 ███████████████████████ Host: OrangePi 3 LTS ▄▄██ ██▄▄ Kernel: 5.15.32-sunxi64 ▄▄██ ███████████ ██▄▄ Uptime: 3 mins ▄▄██ ██ ██ ██▄▄ Packages: 1315 (dpkg) ▄▄██ ██ ██ ██▄▄ Shell: bash 5.0.17 ▄▄██ ██ ██ ██▄▄ Resolution: 3840x2160 ▄▄██ █████████████ ██▄▄ Terminal: /dev/pts/0 ▄▄██ ██ ██ ██▄▄ CPU: (4) @ 1.800GHz ▄▄██ ██ ██ ██▄▄ Memory: 172MiB / 1989MiB ▄▄██ ██ ██ ██▄▄ ▄▄██ ██▄▄ ███████████████████████ █ █ █ █ █ █ █ █ █ █ █

Still same result as before, drop to initram, in dmesg same pin problems

Yup, still not booting on my end also, Dmesg: https://nextcloud.lodz.webredirect.org/s/et7DNigcAzrfRkq UART boot: picocom v3.1 port is : /dev/ttyUSB0 flowcontrol : none baudrate is : 115200 parity is : none databits are : 8 stopbits are : 1 escape is : C-a local echo is : no noinit is : no noreset is : yes hangup is : no nolock is : yes send_cmd is : sz -vv receive_cmd is : rz -vv -E imap is : omap is : emap is : crcrlf,delbs, logfile is : none initstring : none exit_after is : not set exit is : no Type [C-a] [C-h] to see available commands Terminal ready U-Boot SPL 2021.10-armbian (Mar 27 2022 - 12:15:39 +0100) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL31: v2.2(debug):a04808c1-dirty NOTICE: BL31: Built : 12:15:19, Mar 27 2022 NOTICE: BL31: Detected Allwinner H6 SoC (1728) NOTICE: BL31: Found U-Boot DTB at 0xc07c1b0, model: OrangePi 3 LTS INFO: ARM GICv2 driver initialized NOTICE: PMIC: Probing AXP805 NOTICE: PMIC: AXP805 detected INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for 855873 was applied INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x4a000000 INFO: SPSR = 0x3c9 U-Boot 2021.10-armbian (Mar 27 2022 - 12:15:39 +0100) Allwinner Technology CPU: Allwinner H6 (SUN50I) Model: OrangePi 3 LTS DRAM: 2 GiB MMC: mmc@4020000: 0, mmc@4022000: 1 Loading Environment from FAT... Unable to use mmc 0:1... In: serial@5000000 Out: serial@5000000 Err: serial@5000000 Net: No ethernet found. Autoboot in 1 seconds, press <Space> to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3202 bytes read in 3 ms (1 MiB/s) ## Executing script at 4fc00000 U-boot loaded from SD Boot script loaded from mmc 154 bytes read in 3 ms (49.8 KiB/s) 37751 bytes read in 6 ms (6 MiB/s) 3844 bytes read in 7 ms (536.1 KiB/s) Applying kernel provided DT fixup script (sun50i-h6-fixup.scr) ## Executing script at 45000000 12463018 bytes read in 618 ms (19.2 MiB/s) 21735432 bytes read in 1076 ms (19.3 MiB/s) Moving Image from 0x40080000 to 0x40200000, end=41710000 ## Loading init Ramdisk from Legacy Image at 4ff00000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 12462954 Bytes = 11.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 4fa00000 Booting using the fdt blob at 0x4fa00000 Loading Ramdisk to 4941d000, end 49fffb6a ... OK Loading Device Tree to 00000000493ab000, end 000000004941cfff ... OK Starting kernel ...

Downloaded 2 times and checksum don't match, every time same wrong checksum. Expected: 609de716873f3c12db95878c39064d13a66e06f1e1c528e28049db9635fd4d66 got cd721c9a1525e36072d4458e6730c1cf8774dbdffbfbf5e45601580d1cb024dd Maybe something wrong with upload?

I have this power supply https://www.conrad.com/p/xiaomi-mdy-10-ef-mobile-phone-charger-type-quick-charge-mode-usb-2355049 And it works with official debian image from OrangePi 100% of the time so there must be some differences in regard to power settings between images

"Couldn't get bank PC/PD regulator" and series of pin numbers that followed but don't know if it's related to not booting properly

Yeah, tried ethernet image and same result dropping to shell but i did manage to do dmesg, USB was working on top port https://nextcloud.lodz.webredirect.org/s/T8dMn3gk2YHe64p

Unfortunately no, my USB keyboard doesn't work on this image

Tested new image, still same result on my SBC, dropping to shell (initramfs)

Tested new image, unfortunately still dropping to a shell, so there must be something more that blocks

Worth a try

Don't know about that but this is interesting: https://nextcloud.lodz.webredirect.org/s/8KLjGABaybesQTD

Yes, but I can hookup to a monitor. I was counting on ssh but it wont get DHCP address from my router