Kamileon

Tried to build Armbian for opi 3 lts from git and i get error: AR drivers/net/built-in.a AR drivers/built-in.a GEN .version CHK include/generated/compile.h LD vmlinux.o MODPOST vmlinux.symvers MODINFO modules.builtin.modinfo GEN modules.builtin LD .tmp_vmlinux.kallsyms1 [ error ] ERROR in function compile_kernel [ main.sh:589 -> main.sh:490 -> compilation.sh:507 -> general.sh:0 ] [ error ] Kernel was not built [ @host ] Debian 11 server normal

Audio from Jack output works for me did speaker-test aplay -L null Discard all samples (playback) or generate zero samples (capture) samplerate Rate Converter Plugin Using Samplerate Library speexrate Rate Converter Plugin Using Speex Resampler jack JACK Audio Connection Kit oss Open Sound System pulse PulseAudio Sound Server upmix Plugin for channel upmix (4,6,8) vdownmix Plugin for channel downmix (stereo) with a simple spacialization default:CARD=allwinnerac200c allwinner,ac200-codec, 508f000.i2s-acx00-dai acx00-codec-0 Default Audio Device sysdefault:CARD=allwinnerac200c allwinner,ac200-codec, 508f000.i2s-acx00-dai acx00-codec-0 Default Audio Device dmix:CARD=allwinnerac200c,DEV=0 allwinner,ac200-codec, 508f000.i2s-acx00-dai acx00-codec-0 Direct sample mixing device dsnoop:CARD=allwinnerac200c,DEV=0 allwinner,ac200-codec, 508f000.i2s-acx00-dai acx00-codec-0 Direct sample snooping device hw:CARD=allwinnerac200c,DEV=0 allwinner,ac200-codec, 508f000.i2s-acx00-dai acx00-codec-0 Direct hardware device without any conversions plughw:CARD=allwinnerac200c,DEV=0 allwinner,ac200-codec, 508f000.i2s-acx00-dai acx00-codec-0 Hardware device with all software conversions usbstream:CARD=allwinnerac200c allwinner,ac200-codec USB Stream Output default:CARD=sun9ihdmi sun9i-hdmi, SUN9I-HDMI PCM i2s-hifi-0 Default Audio Device sysdefault:CARD=sun9ihdmi sun9i-hdmi, SUN9I-HDMI PCM i2s-hifi-0 Default Audio Device dmix:CARD=sun9ihdmi,DEV=0 sun9i-hdmi, SUN9I-HDMI PCM i2s-hifi-0 Direct sample mixing device dsnoop:CARD=sun9ihdmi,DEV=0 sun9i-hdmi, SUN9I-HDMI PCM i2s-hifi-0 Direct sample snooping device hw:CARD=sun9ihdmi,DEV=0 sun9i-hdmi, SUN9I-HDMI PCM i2s-hifi-0 Direct hardware device without any conversions plughw:CARD=sun9ihdmi,DEV=0 sun9i-hdmi, SUN9I-HDMI PCM i2s-hifi-0 Hardware device with all software conversions usbstream:CARD=sun9ihdmi sun9i-hdmi USB Stream Output root@orangepi3-lts:~# speaker-test speaker-test 1.2.2 Playback device is default Stream parameters are 48000Hz, S16_LE, 1 channels Using 16 octaves of pink noise Rate set to 48000Hz (requested 48000Hz) Buffer size range from 256 to 262144 Period size range from 128 to 32768 Using max buffer size 262144 Periods = 4 was set period_size = 32768 was set buffer_size = 262144 0 - Front Left Time per period = 2.740674 0 - Front Left Time per period = 2.757094 0 - Front Left Time per period = 2.740576

Boots on my end also Ethernet works root@orangepi3-lts ------------------ █ █ █ █ █ █ █ █ █ █ █ OS: Armbian (22.05.0-trunk) aarch64 ███████████████████████ Host: OrangePi 3 LTS ▄▄██ ██▄▄ Kernel: 5.15.32-sunxi64 ▄▄██ ███████████ ██▄▄ Uptime: 3 mins ▄▄██ ██ ██ ██▄▄ Packages: 1315 (dpkg) ▄▄██ ██ ██ ██▄▄ Shell: bash 5.0.17 ▄▄██ ██ ██ ██▄▄ Resolution: 3840x2160 ▄▄██ █████████████ ██▄▄ Terminal: /dev/pts/0 ▄▄██ ██ ██ ██▄▄ CPU: (4) @ 1.800GHz ▄▄██ ██ ██ ██▄▄ Memory: 172MiB / 1989MiB ▄▄██ ██ ██ ██▄▄ ▄▄██ ██▄▄ ███████████████████████ █ █ █ █ █ █ █ █ █ █ █

Still same result as before, drop to initram, in dmesg same pin problems

Yup, still not booting on my end also, Dmesg: https://nextcloud.lodz.webredirect.org/s/et7DNigcAzrfRkq UART boot: picocom v3.1 port is : /dev/ttyUSB0 flowcontrol : none baudrate is : 115200 parity is : none databits are : 8 stopbits are : 1 escape is : C-a local echo is : no noinit is : no noreset is : yes hangup is : no nolock is : yes send_cmd is : sz -vv receive_cmd is : rz -vv -E imap is : omap is : emap is : crcrlf,delbs, logfile is : none initstring : none exit_after is : not set exit is : no Type [C-a] [C-h] to see available commands Terminal ready U-Boot SPL 2021.10-armbian (Mar 27 2022 - 12:15:39 +0100) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL31: v2.2(debug):a04808c1-dirty NOTICE: BL31: Built : 12:15:19, Mar 27 2022 NOTICE: BL31: Detected Allwinner H6 SoC (1728) NOTICE: BL31: Found U-Boot DTB at 0xc07c1b0, model: OrangePi 3 LTS INFO: ARM GICv2 driver initialized NOTICE: PMIC: Probing AXP805 NOTICE: PMIC: AXP805 detected INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for 855873 was applied INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x4a000000 INFO: SPSR = 0x3c9 U-Boot 2021.10-armbian (Mar 27 2022 - 12:15:39 +0100) Allwinner Technology CPU: Allwinner H6 (SUN50I) Model: OrangePi 3 LTS DRAM: 2 GiB MMC: mmc@4020000: 0, mmc@4022000: 1 Loading Environment from FAT... Unable to use mmc 0:1... In: serial@5000000 Out: serial@5000000 Err: serial@5000000 Net: No ethernet found. Autoboot in 1 seconds, press <Space> to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3202 bytes read in 3 ms (1 MiB/s) ## Executing script at 4fc00000 U-boot loaded from SD Boot script loaded from mmc 154 bytes read in 3 ms (49.8 KiB/s) 37751 bytes read in 6 ms (6 MiB/s) 3844 bytes read in 7 ms (536.1 KiB/s) Applying kernel provided DT fixup script (sun50i-h6-fixup.scr) ## Executing script at 45000000 12463018 bytes read in 618 ms (19.2 MiB/s) 21735432 bytes read in 1076 ms (19.3 MiB/s) Moving Image from 0x40080000 to 0x40200000, end=41710000 ## Loading init Ramdisk from Legacy Image at 4ff00000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 12462954 Bytes = 11.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 4fa00000 Booting using the fdt blob at 0x4fa00000 Loading Ramdisk to 4941d000, end 49fffb6a ... OK Loading Device Tree to 00000000493ab000, end 000000004941cfff ... OK Starting kernel ...

Downloaded 2 times and checksum don't match, every time same wrong checksum. Expected: 609de716873f3c12db95878c39064d13a66e06f1e1c528e28049db9635fd4d66 got cd721c9a1525e36072d4458e6730c1cf8774dbdffbfbf5e45601580d1cb024dd Maybe something wrong with upload?

I have this power supply https://www.conrad.com/p/xiaomi-mdy-10-ef-mobile-phone-charger-type-quick-charge-mode-usb-2355049 And it works with official debian image from OrangePi 100% of the time so there must be some differences in regard to power settings between images

"Couldn't get bank PC/PD regulator" and series of pin numbers that followed but don't know if it's related to not booting properly

Yeah, tried ethernet image and same result dropping to shell but i did manage to do dmesg, USB was working on top port https://nextcloud.lodz.webredirect.org/s/T8dMn3gk2YHe64p

Unfortunately no, my USB keyboard doesn't work on this image

Tested new image, still same result on my SBC, dropping to shell (initramfs)

Tested new image, unfortunately still dropping to a shell, so there must be something more that blocks

Worth a try

Don't know about that but this is interesting: https://nextcloud.lodz.webredirect.org/s/8KLjGABaybesQTD

Yes, but I can hookup to a monitor. I was counting on ssh but it wont get DHCP address from my router

Nope, same as before except the led is green now. Checked sha256sum and seems to be OK but stuck on "Starting kernel ..."

That's weird, I redownloaded your image one more and I have exact same sha1sum as the first time which is not what you got from sha1 file sha1sum Armbian_22.05.0-trunk_Orangepi3-lts_focal_current_5.15.28_xfce_desktop.img dce7241bd8dc2b89e1328034e17686f6e6480719 Armbian_22.05.0-trunk_Orangepi3-lts_focal_current_5.15.28_xfce_desktop.img Still doesn't boot

Mine i also V 1.4 https://nextcloud.lodz.webredirect.org/s/MH8SxkMfjZZQe5i @Ukhellfire This is what I get from UART starting your image U-Boot SPL 2021.10-armbian (Mar 14 2022 - 08:18:53 +0000) DRAM: 2048 MiB Trying to boot from MMC1 NOTICE: BL31: v2.2(debug):a04808c1-dirty NOTICE: BL31: Built : 08:18:34, Mar 14 2022 NOTICE: BL31: Detected Allwinner H6 SoC (1728) NOTICE: BL31: Found U-Boot DTB at 0xc07c170, model: OrangePi 3 LTS INFO: ARM GICv2 driver initialized NOTICE: PMIC: Probing AXP805 NOTICE: PMIC: AXP805 detected INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for 855873 was applied INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x4a000000 INFO: SPSR = 0x3c9 U-Boot 2021.10-armbian (Mar 14 2022 - 08:18:53 +0000) Allwinner Technology CPU: Allwinner H6 (SUN50I) Model: OrangePi 3 LTS DRAM: 2 GiB MMC: mmc@4020000: 0, mmc@4022000: 1 Loading Environment from FAT... Unable to use mmc 0:1... In: serial@5000000 Out: serial@5000000 Err: serial@5000000 Net: No ethernet found. Autoboot in 1 seconds, press <Space> to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3202 bytes read in 4 ms (781.3 KiB/s) ## Executing script at 4fc00000 U-boot loaded from SD Boot script loaded from mmc 154 bytes read in 3 ms (49.8 KiB/s) 35780 bytes read in 9 ms (3.8 MiB/s) 4191 bytes read in 6 ms (681.6 KiB/s) Applying kernel provided DT fixup script (sun50i-h6-fixup.scr) ## Executing script at 45000000 12462020 bytes read in 619 ms (19.2 MiB/s) 21735432 bytes read in 1077 ms (19.2 MiB/s) Moving Image from 0x40080000 to 0x40200000, end=41710000 ## Loading init Ramdisk from Legacy Image at 4ff00000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 12461956 Bytes = 11.9 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 4fa00000 Booting using the fdt blob at 0x4fa00000 Loading Ramdisk to 4941d000, end 49fff784 ... OK Loading Device Tree to 00000000493ab000, end 000000004941cfff ... OK Starting kernel ... Hangs on "Starting kernel ..." What is checksum for that image? For reference this is Orangepi image booting that works [191]HELLO! BOOT0 is starting! [195]boot0 commit : b65841975dcb31f64a2c69344f60db12b98791ae [213]PMU: AXP806 [216]vdd-sys vol:980mv [219]set pll start [222]set pll end [224]DRAM VERSION IS V2_76 [227]PMU:Set DDR Vol 1200mV OK. [230]PMU:Set DDR Vol 1200mV OK. [1439]DRAM CLK =744 MHZ [1441]DRAM Type =7 (3:DDR3,4:DDR4,6:LPDDR2,7:LPDDR3) [1446]DRAM zq value: 003b3bfb [1750]IPRD=00710071--PGCR0=00000f5d--PLL=b0003d00 [1755]Actual DRAM SIZE =2048 M [1758]DRAM SIZE =2048 M,para1 = 000030fa,para2 = 08001000 [1769]DRAM simple test OK. [1772]dram size =2048 [1775]card no is 0 [1777][mmc]: mmc driver ver 2017-10-19 10:34:00 [1781][mmc]: sdc0 spd mode error, 2 [1785][mmc]: mmc 0 bias 00000000 [1793][mmc]: Wrong media type 0x00000000 [1797][mmc]: ***Try SD card 0*** [1807][mmc]: HSSDR52/SDR25 4 bit [1810][mmc]: 50000000 Hz [1813][mmc]: 14840 MB [1815][mmc]: ***SD/MMC 0 init OK!!!*** [1945]Loading boot-pkg Succeed(index=0). [1949]Entry_name = u-boot [1964]Entry_name = parameter [1967]Entry_name = monitor [1971]Entry_name = scp [1980]set arisc reset to de-assert state [1984]Entry_name = soc-cfg [1988]Entry_name = dtb [1992]Ready to disable icache. [1995]Jump to secend Boot. INFO: Configuring SPC Controller NOTICE: BL3-1: v1.0(debug):c5e8aec NOTICE: BL3-1: Built : 14:42:22, Apr 26 2018 NOTICE: BL3-1 commit: c5e8aec20ca8c6ce31078c5689cbdb1a7352c813 INFO: BL3-1: Initializing runtime services ERROR: Error initializing runtime service tspd_fast INFO: BL3-1: Preparing for EL3 exit to normal world INFO: BL3-1: Next image address = 0x4a000000 INFO: BL3-1: Next image spsr = 0x1d3 U-Boot 2014.07-orangepi (Dec 30 2021 - 09:15:17) Xunlong Software [2.043]uboot commit : b65841975dcb31f64a2c69344f60db12b98791ae [2.043]secure enable bit: 0 [2.043]normal mode: with secure monitor I2C: ready [2.044]pmbus: ready [2.044][ARISC] :arisc initialize [2.070][ARISC] :arisc para ok [SCP] :sunxi-arisc driver begin startup 2 [SCP] :arisc version: [] [SCP] :sunxi-arisc driver v1.10 is starting [2.084][ARISC] :sunxi-arisc driver startup succeeded [2.085]PMU: AXP806 [2.085]PMU: AXP806 found [2.085]bat_vol=0, ratio=0 [2.085]set pc_bias(1) bias:1800 [2.085]set pg_bias(5) bias:1800 [2.085]set power on vol to default [2.086]dcdca_vol = 1000, onoff=1 [2.090]aldo2_vol = 3300, onoff=1 [2.094]bldo3_vol = 1800, onoff=1 [2.098]cldo2_vol = 3300, onoff=1 [2.103]cldo3_vol = 3300, onoff=1 [2.107]find power_sply to end [2.107]cant find pll setting(1320M) from pll table,use default(408M) [2.109]PMU: cpux 408 Mhz,AXI=204 Mhz [2.109]PLL6=600 Mhz,AHB1=200 Mhz, APB1=100Mhz MBus=400Mhz [2.114]DRAM: 2 GiB [2.117]fdt addr: 0xb9ccb0e0 [2.118]gd->fdt_size: 0x1a6c0 [2.121]Relocation Offset is: 74d85000 [2.207]gic: sec monitor mode [2.207]line:180 func:check_ir_boot_recovery start [2.207]ir boot recovery not used [2.207][key recovery] no use [2.208][box standby] read rtc = 0x0 [2.208][box standby] start_type = 0x1 [2.208][box standby] to kernel [2.208]workmode = 0,storage type = 1 [2.210]MMC: 2 SUNXI SD/MMC: 2 [mmc]: [0-63|64] [mmc]: [0-54|55] [mmc]: [6-51|46] [mmc]: [0-13|14] [27-31|5] [36-53|18] [mmc]: [0-51|52] [59-59|1] [61-63|3] [mmc]: [0-28|29] [59-63|5] [mmc]: [0-61|62] [mmc]: [6-54|49] [56-61|6] [mmc]: [2-6|5] [9-58|50] [mmc]: [1-28|28] Normal [7.003]MMC: 0 SUNXI SD/MMC: 2, SUNXI SD/MMC: 0 [7.024]sunxi flash init ok [7.024]hdmi hdcp not enable! [7.024]display init start [7.024]drv_disp_init [7.041]init_clocks: finish init_clocks. [7.060]__clk_enable: clk is null. [7.060]hdmi cec clk enable failed! [7.066]request pwm success, pwm1:pwm1:0x300a000. [7.074]key emac have not been burned yet [7.074][ac200] tv_read_sid,line:188 [7.074]sunxi_efuse_readn failed:-1 [7.081]drv_disp_init finish [7.081]hdmi hdcp not enable! 200 bytes read in 14 ms (13.7 KiB/s) Set HDMI disp_mode to 1080p60 [7.099]hdmi hpd out, force open? 200 bytes read in 13 ms (14.6 KiB/s) Set fb0_width to 1280 Set fb0_height to 720 [7.116]display init end Using default environment bmp_name=/boot/boot.bmp 230456 bytes read in 26 ms (8.5 MiB/s) [7.153]show bmp on ok [7.153]inter uboot shell Hit any key to stop autoboot: 0 mmc0 is current device 2615 bytes read in 18 ms (141.6 KiB/s) ## Executing script at 43100000 U-boot loaded from SD Boot script loaded from mmc 200 bytes read in 14 ms (13.7 KiB/s) 102389 bytes read in 31 ms (3.1 MiB/s) 6551063 bytes read in 311 ms (20.1 MiB/s) 22480968 bytes read in 994 ms (21.6 MiB/s) ## Booting kernel from Legacy Image at 41000000 ... Image Name: Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 22480904 Bytes = 21.4 MiB Load Address: 41000000 Entry Point: 41000000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 43300000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 6550999 Bytes = 6.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK reserving fdt memory region: addr=40020000 size=800 reserving fdt memory region: addr=48000000 size=1000000 reserving fdt memory region: addr=48100000 size=4000 reserving fdt memory region: addr=48104000 size=1000 reserving fdt memory region: addr=48105000 size=1000 reserving fdt memory region: addr=43000000 size=1a000 Loading Ramdisk to 499c0000, end 49fff5d7 ... OK Using Device Tree in place at 44000000, end 4401d6bf Starting kernel ... INFO: BL3-1: Next image address = 0x41000000 INFO: BL3-1: Next image spsr = 0x3c5 WARNING: Unimplemented Standard Service Call: 0xc0000026 Orange Pi 2.1.6 Buster ttyS0

It's a standard Orangepi Debian Buster image, don't know about different variants Here are dtb/dts files from that image: https://nextcloud.lodz.webredirect.org/s/Jks6x9o9sCfysPD

@Ukhellfire unfortunately your image doesn't boot on my Orangepi. Will be getting my UART adapter today so I will check boot process.

Hi, i also would like to test Armbian on this board. What is strange is that I have tried Armbian for Orange Pi 3 on a LTS board and it didn't boot.