device: orange pi pc soft: Armbian_5.14_Orangepipc_Debian_jessie_3.4.112.7z
my log via serial:
U-Boot SPL 2016.05-armbian (Jun 05 2016 - 09:45:23)
DRAM: 1024 MiB
Trying to boot from MMC1
U-Boot 2016.05-armbian (Jun 05 2016 - 09:45:23 +0200) Allwinner Technology
CPU: Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi PC
I2C: ready
DRAM: 1 GiB
MMC: SUNXI SD/MMC: 0 (SD), SUNXI SD/MMC: 1
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
starting USB...
USB0: USB EHCI 1.00
USB1: USB OHCI 1.0
USB2: USB EHCI 1.00
USB3: USB OHCI 1.0
USB4: USB EHCI 1.00
USB5: USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 1 USB Device(s) found
scanning bus 4 for devices... 1 USB Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot/boot.scr
2444 bytes read in 182 ms (12.7 KiB/s)
## Executing script at 43100000
gpio: pin PL10 (gpio 298) value is 1
gpio: pin PG11 (gpio 203) value is 1
0 bytes read in 131 ms (0 Bytes/s)
** File not found /boot/.next **
** Unrecognized filesystem type **
** File not found .next **
36192 bytes read in 516 ms (68.4 KiB/s)
3113891 bytes read in 3143 ms (966.8 KiB/s)
5064616 bytes read in 5070 ms (974.6 KiB/s)
Kernel image @ 0x48000000 [ 0x000000 - 0x4d47a8 ]
## Loading init Ramdisk from Legacy Image at 42000000 ...
Image Name: uInitrd
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 3113827 Bytes = 3 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Using machid 0x1029 from environment
Starting kernel ...
[sun8i_fixup]: From boot, get meminfo:
Start: 0x40000000
Size: 1024MB
ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1
ion_reserve_select: ion chipid [0x2004620!
ion_reserve_common: ion reserve: [0x50000000, 0x60000000]!
Debian GNU/Linux 8 orangepipc ttyS0
orangepipc login:
U-Boot SPL 2016.05-armbian (Jun 05 2016 - 09:45:23)
DRAM: 1024 MiB
Trying to boot from MMC1
mmc_load_image_raw_sector: mmc block read error
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###
but after switch off/on power this work.... problem only with command reboot or shutdown -r now device after this command not started
please help