RSS Bot

Microchip WBZ451 Curiosity Board features the company’s Microchip’s WBZ451PE Bluetooth Low Energy 5.2 and Zigbee 3.0 RF module based on the new Microchip PIC32CX-BZ2 32-bit Arm Cortex-M4F wireless microcontroller. WBZ451 Curiosity Board (EV96B94A) specifications: Wireless module – WBZ451PE Bluetooth Low Energy and Zigbee RF Module with Microchip PIC32CX-BZ2 32-bit Arm Cortex-M4F wireless microcontroller @ up to 64 MHz, 128KB RAM, 1MB flash, 2.4 GHz radio for Bluetooth LE 5.2 and 802.15.4 (Zigbee 3.0) Tx output power – Up +12 dBm Rx sensitivity – Up to -103 dBm PCB antenna 29x I/O pins Storage – 64Mbit QSPI flash Expansion – mikroBUS socket for MikroElectronika Click adapter boards Sensor – Microchip MCP9700A analog voltage temperature sensor Debugging On-board Programmer/Debug Circuit using PICkit On-board 4 (PKoB4) based on Microchip SAME70 MCU On-board USB to UART Serial Converter with Hardware Flow Control based on Microchip MCP2200 10-pin Arm Serial Wire Debug (SWD) header for [...] The post WBZ451 Curiosity Board features Microchip PIC32CX-BZ2 BLE and Zigbee 3.0 microcontroller appeared first on CNX Software - Embedded Systems News. View the full article

No descriptionView the full article

Description Having auto-login isn't always desirable for production images. How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [X] Booted on a NanoPi R4S Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [X] Any dependent changes have been merged and published in downstream modules View the full article

Description Partly resolves #4306. How Has This Been Tested? If the kaslrseed command hasn't been compiled in to u-boot, it gracefully skips generating the kASLR [X] Booted on a NanoPi R4S Checklist: [X] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [X] Any dependent changes have been merged and published in downstream modules View the full article

Description Maintenance. How Has This Been Tested? [x] Build test of all variants manually [x] Build in CI Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

No descriptionView the full article

Firefly EC-R3588SPC industrial mini PC is based on the Rockchip RK3588S octa-core Cortex-A76/A55 processor and offers various interfaces used in industrial settings such as RS485 and RS232 serial interfaces, a CAN Bus, a relay, and digital input. The system is offered with up to 32GB RAM and 128GB eMMC flash, supports M.2 NVMe or SATA storage, as well as Gigabit Ethernet, Fast Ethernet, WiFi 4, Bluetooth 5.0, and 4G LTE cellular connectivity. You’ll also find 8K-capable HDMI and DisplayPort (USB-C) video outputs, some USB ports, and a 3.5mm audio jack. Firefly EC-R3588SPC specifications: SoC – Rockchip RK3588S octa-core processor with CPU – 4x Cortex-A76 cores @ up to 2.4 GHz, four Cortex-A55 cores GPU – Arm Mali-G610 MP4 quad-core GPU with OpenGL ES3.2 / OpenCL 2.2 / Vulkan1.1 support AI accelerator – 6 TOPS NPU VPU – 8Kp60 H.265/VP9/AVS2 video decoder, 4Kp60 decoder, 8Kp30 H.265/H.264 video encoder System Memory – [...] The post Rockchip RK3588S industrial mini PC features CAN Bus, RS485 & RS232 interfaces, relay, and more appeared first on CNX Software - Embedded Systems News. View the full article

GL.inet Brume 2 is an OpenWrt router, or rather a “security gateway” as the company calls it, powered by a MediaTek MT7981B (Filogic 820) dual-core Cortex-A53 processor, and equipped with a 2.5GbE WAN port and a Gigabit Ethernet LAN port. The device also comes with a USB 3.0 port for storage and a USB Type-C port for power. It is offered with either a plastic enclosure (GL-MT2500 model) or an aluminum allow case (GL-MT2500A model), and with WireGuard and OpenVPN, is suitable to host a VPN server and “monitor, manage, and configure SD-WAN settings”. Brume 2 (GL-MT2500/GL-MT2500A) specifications: SoC – MediaTek MT7981B (Filogic 820) dual-core processor @ 1.3 GHz System Memory – 1GB DDR4 Storage – 8GB eMMC flash Networking 1x 2.5 Gbps Ethernet WAN port 1x Gigabit Ethernet LAN port USB – 1x USB 3.0 Type-A port, 1x USB Type-C port for power Misc – Reset button, Power and [...] The post Brume 2 – OpenWrt “security gateway” with MediaTek MT7981B SoC supports WireGuard VPN appeared first on CNX Software - Embedded Systems News. View the full article

Description meson: Bump edge to v6.0 How Has This Been Tested? [X] Build and run Checklist: [ ] My code follows the style guidelines of this project [X] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [X] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Didn't realize there is a separate patch folder for Station P2. Is this really necessary? @150balbes How Has This Been Tested? [x] Build test CI test https://github.com/armbian/build/actions/runs/3326809703 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Clockwork’s uConsole is a modular handheld computer with a 5-inch display, a built-in keyboard, and based on a carrier board supporting various Arm or RISC-V modules compatible with the Raspberry Pi CM3 or CM4 form factors. The device is offered with a system-on-module with up to 4GB RAM, a WiFi 5 and Bluetooth 5.0 wireless module, features micro HDMI video output, USB ports, and an audio jack, plus expansion connectors for more advanced users, and takes two 18650 batteries for power. The company also offers a 4G LTE module for cellular connectivity. The mainboard, called ClockworkPi v3.14 revision 5, offers the following: System-on-module socket – 200-pin DDR2 SODIMM socket compatible with Raspberry Pi CM3 and, through an adapter, Raspberry Pi CM4 and compatible modules Storage – MicroSD card socket Video Interfaces 40-pin MIPI DSI connector micro HDMI interface for external display Audio – 3.5mm audio jack with headphone and microphone [...] The post uConsole is a modular Arm or RISC-V handheld computer with optional 4G connectivity appeared first on CNX Software - Embedded Systems News. View the full article

Description Few more fixes to config. Changes in patches affect RK3308 audio @brentr 3328 @paolosabatino ... I hope i didn't break something. How Has This Been Tested? [x] Build test Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

How Has This Been Tested? [x] Build test View the full article

Description @rpardini @adeepn Disabling broken patch: general-pwm-gpio-Add-a-generic-gpio-based-PWM-.patch.disabled How Has This Been Tested? [x] Build test View the full article

How Has This Been Tested? [x] Build test View the full article

[x] Build test View the full article

How Has This Been Tested? [x] Build test View the full article

Description Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change. Jira reference number [AR-9999] How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Build test passing Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Spotpear’s Raspberry Pi Zero 2 W to Raspberry Pi 3/4 adapters would not exist in a “normal” world of abundance that still existed a little less than 3 years ago. But I suppose extraordinary times require extraordinary adapters… If you have a spare Raspberry Pi Zero 2 W lying around but would rather like getting the ports from a Raspberry Pi 3 or Raspberry Pi 4, Spotpear has designed three adapters that can also be used as USB docks from a computer or mobile phone. The first adapter the “ZERO to 4B” will get you a Raspberry Pi 4-looking SBC with a Raspberry Pi RP3A0 system-in-package (Quad-core Cortex-A53 CPU + 512 MB RAM), and most of the same ports, except only three USB 2.0 Type-A ports are available with a maximum speed of 480 Mbps, and only one HDMI output due the inherent limitations of the Raspberry Pi Zero 2 [...] The post Adapters convert Raspberry Pi Zero 2 W into Raspberry Pi 3 or 4 appeared first on CNX Software - Embedded Systems News. View the full article

No descriptionView the full article

No descriptionView the full article

Microsoft has just introduced the Windows Dev Kit 2023, that’s basically a Windows 11 Arm mini PC powered by a Qualcomm Snapdragon 8cx Gen 3 processor designed for developers of Windows programs. Previously known as “Project Volterra”, the system comes with 32GB RAM, 512GB NVMe storage, mini DP video output, Ethernet, WiFi 6, and Bluetooth 5.1 connectivity, as well as five USB 3.2 Gen 2 ports, and more. Windows Dev Kit 2023 specifications: SoC – Qualcomm Snapdragon 8cx Gen 3 compute platform with CPU – 4x 3.0 GHz Prime cores, 4x 2.4 GHz Efficiency Cores GPU – Unnamed Adreno GPU with DirectX 12 (DX12) API support DSP – Qualcomm Hexagon Processor, Qualcomm Sensing Hub AI – Qualcomm Neural Processing Engine SDK support for AI (up to 29+ TOPS) System Memory – 32GB LPDDR4x RAM Storage – 512GB NVMe SSD Video Output – Mini DisplayPort (mini DP) with support for HBR2 [...] The post $600 Windows Dev Kit 2023 is powered by Qualcomm Snapdragon 8cx Gen 3 processor appeared first on CNX Software - Embedded Systems News. View the full article

Bumps ossf/scorecard-action from 2.0.4 to 2.0.6. Release notes Sourced from ossf/scorecard-action's releases. v2.0.6 What's Changed Fix - Broken dockerfile by @​naveensrinivasan in ossf/scorecard-action#979 Full Changelog: https://github.com/ossf/scorecard-action/compare/v2.0.5...v2.0.6 v2.0.5 What's Changed Remove trailing space from example by @​jamacku in ossf/scorecard-action#955 :seedling: Bump actions/cache from 3.0.8 to 3.0.10 by @​dependabot in ossf/scorecard-action#956 :seedling: Bump github/codeql-action from 2.1.25 to 2.1.26 by @​dependabot in ossf/scorecard-action#957 :seedling: Bump step-security/harden-runner from 1.4.5 to 1.5.0 by @​dependabot in ossf/scorecard-action#958 :seedling: Bump debian from 5cf1d98 to b46fc4e by @​dependabot in ossf/scorecard-action#959 :seedling: Bump github.com/sigstore/cosign from 1.12.1 to 1.13.0 by @​dependabot in ossf/scorecard-action#962 :seedling: Upgrade to go 1.19 by @​naveensrinivasan in ossf/scorecard-action#961 :seedling: Bump github.com/spf13/cobra from 1.5.0 to 1.6.0 by @​dependabot in ossf/scorecard-action#967 :seedling: Bump golang from c2a98a5 to b850621 by @​dependabot in ossf/scorecard-action#966 :seedling: Bump golang from b850621 to 25de7b6 by @​dependabot in ossf/scorecard-action#968 New release for Scorecard v4.8.0 by @​naveensrinivasan in ossf/scorecard-action#969 New Contributors @​jamacku made their first contribution in ossf/scorecard-action#955 Full Changelog: https://github.com/ossf/scorecard-action/compare/v2.0.4...v2.0.5 Commits 99c5375 Fix - Broken dockerfile (#979) ff6221f New release for Scorecard v4.8.0 (#969) 608d088 :seedling: Bump golang from b850621 to 25de7b6 (#968) 5e97403 :seedling: Bump golang from c2a98a5 to b850621 (#966) 851b893 :seedling: Bump github.com/spf13/cobra from 1.5.0 to 1.6.0 (#967) c986617 :seedling: Upgrade to go 1.19 (#961) c3d8fd9 :seedling: Bump github.com/sigstore/cosign from 1.12.1 to 1.13.0 (#962) 6075f42 :seedling: Bump debian from 5cf1d98 to b46fc4e (#959) f300553 :seedling: Bump step-security/harden-runner from 1.4.5 to 1.5.0 (#958) de0b2c5 :seedling: Bump github/codeql-action from 2.1.25 to 2.1.26 (#957) Additional commits viewable in compare view Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase. Dependabot commands and options You can trigger Dependabot actions by commenting on this PR: @dependabot rebase will rebase this PR @dependabot recreate will recreate this PR, overwriting any edits that have been made to it @dependabot merge will merge this PR after your CI passes on it @dependabot squash and merge will squash and merge this PR after your CI passes on it @dependabot cancel merge will cancel a previously requested merge and block automerging @dependabot reopen will reopen this PR if it is closed @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself) @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself) @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself) View the full article

Description Fix mic for rt5651 asound.state, the origin state don't open mic route . I did test use Nanopct4, same should fixed use rt5651 codecs's board How Has This Been Tested? [x] I heared sound from Nanopct4 onboard mic record wav file Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

add support OPI-800 View the full article