RSS Bot

Description We have some Python scripts now so we need to move that out Jira reference number AR-1588 How Has This Been Tested? [x] Manual run Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] My changes generate no new warnings View the full article

No descriptionView the full article

extension: c-plus-plus-compiler: include g++ package as well as g++-aarch64-linux-gnu -- so host arch g++ compiler is also available compilation: uboot: manage shopt nullglob same way as IFS, so UBOOT_TARGET_MAP's with * somewhere are not skipped (as is the case for mvebu64) mvebu64: enable_extension "c-plus-plus-compiler"; fix refs to u-boot sources that changed; (try to) add colored logs these need testing, both on mvebu64 itself, but also on other families to make sure I didn't break anything View the full article

Description In this second step (previous one: https://github.com/armbian/build/pull/4913) of rtl8723cs consolidation, the rtl8723cs driver patches and references have been removed from: sunxi-edge (6.2) @The-going media-edge (6.2) @150balbes media-current (6.1) @150balbes for the sunxi-edge there has been a bit of more work: one patch changed from 6.1 to 6.2 (8723-enable-wowlan): the difference was spotted in hunk a dts file for pinephone. The hunk has been extracted and put into patches.armbian for both 6.1 and 6.2. The same hunk has been removed from the patch in misc. I don't know if it is a good idea though: perhaps on next rtl8723cs patch rebase the hunk may reappear but probably we need a better strategy to handle driver updates (putting the driver in a github repo like the other extrawifi?) megous.series, armbian.series and series.conf and been manually adapted, they seem rather ok and patches apply in the right order without issues. The media family patches were already available in the existing misc directory, so they have just been removed. Jira reference number AR-1586 How Has This Been Tested? [x] Compile deb kernel packages correctly for sunxi 6.1 kernel (orange pi 3 lts) [ ] Compile deb kernel packages correctly for sunxi 6.2 kernel (orange pi 3 lts) [ ] Compile deb kernel packages correctly for media 6.1 [ ] Compile deb kernel packages correctly for media 6.2 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Microchip has introduced a range of industrial-grade Single Pair Ethernet (SPE) devices for IIoT and industrial Operational Technology (OT) networks for low-speed Ethernet edge devices and a simplified cabling infrastructure for latency-sensitive applications. Microchip LAN8650/LAN8651 10BASE-T1S single pair Ethernet Controllers The LAN8650 and LAN8651 10BASE-T1S MAC-PHY Ethernet controllers come with an SPI for integration into basic microcontrollers rather than higher-end MCUs with a MAC. They can be used to connect sensors, actuators, and other devices over a simple twisted-pair cable. Microchip LAN8650/LAN8651 specifications: High-performance 10BASE‑T1S single-pair Ethernet PHY Compliant with IEEE Std. 802.3cg-2019 (10BASE-T1S) 10 Mbps over a single balanced pair of conductors Half-duplex point-to-point link segments up to at least 15m Half-duplex multidrop mixing segments up to at least 25m with up to at least 8 PHYs Integrated Media Access Controller (MAC) Host interface – SPI Supports time-sensitive networking (TSN) by timestamping frame ingress and egress EtherGREEN Energy Efficiency [...] The post Microchip unveils Single Pair Ethernet (SPE) 10BASE-T1S and 100BASE-T1 Ethernet devices appeared first on CNX Software - Embedded Systems News. View the full article

Nestled in the historic city of Nuremberg, the annual Embedded World conference will be taking place from March 14 to 16. Collabora will be set up in Hall 4, Booth 4-404, with plenty of space to connect and multiple demos to showcase View the full article

Description Add licence info to the files where this is missing. Jira reference number AR-1593 How Has This Been Tested? No need. Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code View the full article

Most people will probably want to run Linux on their Arm SBC, but Windows 11 could also be an option with the Rock 5B and other single board computers based on Rockchip RK3588 and other powerful Arm SoCs thanks to the Windows on Raspberry project. The project, also known as “Windows on R” is maintained by Mario Bălănică who recently tweeted a screenshot showing Windows 11 running on the Radxa ROCK 5B SBC powered by a Rockchip RK3588 Arm Cortex-A76A/A55 clocked at 1.2 GHz (instead of the usual 2.2/2.4 GHz), but with USB 2.0/3.0 and display interface apparently working just fine. PCIe appears to be detected, but not working. He also noted that virtualization worked out of the box unlike with Raspberry Pi 4 SBC showing Windows Subsystem for Linux (WSL 2) and PowerShell in the screenshot below. Virtualization also enabled running Android apps in Windows 11 Arm as shown [...] The post Windows 11 shown to run on Rock 5B Arm SBC (Rockckip RK3588) appeared first on CNX Software - Embedded Systems News. View the full article

Raspberry Pi Trading has just launched the 1.6MP Raspberry Pi Global Shutter Camera which can capture rapid motion without introducing artifacts usually experienced with rolling shutter cameras such as the earlier Raspberry Pi Camera modules, including the latest Raspberry Pi Camera Module 3. The company sent me Raspberry Pi Global Shutter Camera sample together with a 16mm C-mount lens for review, and I’ll report my experience after going through the specifications of the new camera. Raspberry Pi Global Shutter Camera specifications Sony IMX296LQR-C Sensor Resolution: 1.58 megapixels (color) Sensor size: 6.3mm sensor diagonal Pixel size: 3.45μm x 3.45μm Output – RAW10 Back focus length of lens – Adjustable between 12.5 and 22.4mm Lens standards – CS-Mount or C-Mount (C-CS adapter included) Integrated IR cut filter (can be removed permanently if needed) Tripod mount – 1/4”-20 Dimensions – 38 x 38 x 19.8mm (29.5mm with adapter and dust cap) Weight – [...] The post Mini review of the Raspberry Pi Global Shutter Camera appeared first on CNX Software - Embedded Systems News. View the full article

SONOFF iHost is a Smart Home Hub that enables local control of SONOFF smart switches, lightbulbs, Zigbee sensors, and so on without having to require a connection to the cloud (e.g. eWelink). Future software upgrades will also add more devices such as the ones flashed with Tasmota firmware and any device compatible with the Matter IoT protocol. The gateway is based on either a Rockchip RV1109 SoC with 2GB RAM or a Rockchip RV1126 with 4GB RAM and offers 10/100M Ethernet, WiFi, Bluetooth LE, and Zigbee 3.0 connectivity, as well as a USB 2.0 port to allow for more connectivity. SONFF iHost Smart Home Hub specifications: SoC and Memory Rockchip RV1109 dual-core Arm Cortex-A7 @ 1.5 GHz with RISC-V MCU @ 400 MHz, 2D graphics engine, 1.2 TOPS NPU, 5MP H.264 and H.265 hardware video decoder and encoder, and 2GB DDR4 Rockchip RV1126 quad-core Arm Cortex-A7 @ 1.5 GHz with [...] The post SONOFF iHost Smart Home Hub enables local control of SONOFF, Tasmota, Matter home automation devices appeared first on CNX Software - Embedded Systems News. View the full article

The BeagleBoard.org Foundation has just launched their latest single board computer with the BeaglePlay SBC powered by a Texas Instruments AM625 Cortex-A53/M4/R5 processor with 16GB eMMC flash, 2GB DDR2, and a wide range of I/Os, wired and wireless communication options, and support for expansion module compatible with MikroBus, Grove, and Qwiic connectors. Two wired Ethernet are offered, namely a typical Gigabit Ethernet RJ45 port, as well as a single-pair Ethernet RJ11 port limited to 10 Mbps but with a much longer range and power over data, and wireless connectivity includes dual-band WiFi 4, Bluetooth LE, and Sub-GHz. The board also features HDMI and MIPI DSI display interfaces and a MIPI CSI camera interface. BeaglePlay specifications: SoC – Texas Instruments Sitara AM625 (AM6254) with Quad-core 64-bit Arm Cortex-A53 processor @ 1.4 GHz Arm Cortex-M4F at up to 400 MHz Arm Cortex-R5F PowerVR Rogue 3D GPU supporting up to 2048×1080 @ 60fps, [...] The post BeaglePlay – A $99 Texas Instruments AM625 industrial SBC with plenty of communication and expansion options appeared first on CNX Software - Embedded Systems News. View the full article

Description fix GPIO patch disable pci updates due to many changes. probably we don't need this anymore @Heisath Jira reference number AR-1577 How Has This Been Tested? [x] Build test Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Toradex Verdin AM62 is a system-on-module based on Texas Instruments AM62 Cortex-A53/M4 processor with up to 1GB LPDDR4 RAM and 8GB eMMC flash that is the most affordable system-on-module from the company’s Verdin family. The module also comes with a Gigabit Ethernet PHY and an optional WiFi 5 and Bluetooth 5 module and exposes various interfaces through its edge connector such as dual Gigabit Ethernet, MIPI DSI and LVDS display interfaces, a MIPi CSI-2 camera interface, and CAN FD, and more. Toradex Verdin AM62 specifications: SoC – Texas Instruments Sitara AM623/AM625 with up to 4x Arm Cortex-A53 cores @ 1.4GHz, 1x Arm Cortex-M4F @ 400MHz, optional 3D GPU with support for OpenGL 3.x/2.0/1.1 + extensions, Vulkan 1.2 (AM625 only) System Memory – Up to 1GB LPDDR4 (16-bit) Storage – Up to 8GB eMMC flash Networking Texas Instruments DP83867IRRGZR industrial-grade Gigabit Ethernet PHY Optional Wi-Fi 5 and Bluetooth 5 module (AzureWave [...] The post Toradex Verdin AM62 – An entry-level Sitara AM623/AM625 SoM for Industry 4.0, Smart Cities, Healthcare… appeared first on CNX Software - Embedded Systems News. View the full article

Description Four fixes: 1, board-pbp-add-dp-alt-mode.patch: there is an upstream change, so fix this patch to fit current kernel 2, board-rock3a-cec.patch: there is an already merged commit, so delete it 3, board-rock3a-hdmi-sound.patch already merged, delete it 4, board-rock3a-pcie.patch pcie2 part already merged, and pcie3 part is on the way. I deleted the pcie2 part and use pcie3 patch from upstream Still failed patch: wifi-4003-uwe5622-adjust-for-rockchip.patch. This is because base patch patch/misc/wireless-driver-for-uwe5622-allwinner.patch is not applied because of armbian-next merged to main and lib/functions/compilation/patch/kernel-drivers.sh has been drooped. @paolosabatino maybe we have to add misc drivers to a new place? How Has This Been Tested? Please describe the tests that you ran to verify your changes. Please also note any relevant details for your test configuration. [x] Kernel built success Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [x] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

ESP 360 Remote is an ESP32-based IR and 433 MHz RF remote with built-in sensors used to control home appliances over WiFi and that also integrates with Home Assistant open-source home automation framework. The open-source hardware design is comprised of a mainboard with an ESP32-WROOM-32E module, temperature, humidity, and light sensors, and a board on the top with nine infrared LEDs, one IR receiver, as well as a 433 MHz (or 315 MHz) RF receiver and transmitter with the receivers used for learning the code from the remote controls. ESP 360 Remote specifications: Wireless module – ESP32-WROOM-32E with ESP32 dual-core microcontroller 4MB flash 2.4 GHz WiFi and Bluetooth LE connectivity, built-in PCB antenna, fully compatible with ESPHome firmware Control interface 9x High Power IR LEDs to control devices in all directions (hence the 360 name) IR receiver to learn remote control codes 433 MHz (or 315 MHz) RF transmitter 433 [...] The post Home Assistant compatible “ESP 360 Remote” controls infrared and 433MHz appliances over WiFi (Crowdfunding) appeared first on CNX Software - Embedded Systems News. View the full article

STMicroelectronics has announced the STM32H5 Arm Cortex-M33 clocked at up to 250 MHz and supporting STM32Trust TEE Secure Manager to boost both performance and security in “next generation smart applications”. The STM32H5 family has three product types with the higher-end STM32H563/573 with up to 2MB flash, 640KB SRAM, Ethernet and hardware security, the STM32H562 with a similar design but less interfaces, and the entry-level STM32H502 with 128KB flash, 32KB SRAM. STM32H5 key features and specifications: MCU core – Arm Cortex-M33 core with TrustZone technology, digital signal processing (DSP) and floating-point unit (FPU) running up to 250 MHz; Up to 375 DMIPS and a 1023 CoreMark score executing from the flash memory Memory and Storage STM32H563/573/562 – 1 to 2 Mbytes of flash memory, 640 Kbytes of SRAM STM32H503 – 128 Kbytes of flash memory and 32 Kbytes of RAM. OSPI serial flash memory interface Up to 2x SDMMC FMC interfaces [...] The post STMicro STM32H5 Arm Cortex-M33 MCU clocks at 250 MHz, supports STM32Trust TEE Secure Manager appeared first on CNX Software - Embedded Systems News. View the full article

by passing the WT_SESSION environment variable to the docker container View the full article

Description All boards are without maintainers so not a problem if features are disabled. Jira reference number [AR-9999] How Has This Been Tested? [x] Kernel build Checklist: [ ] My code follows the style guidelines of this project [ ] I have performed a self-review of my own code [ ] I have commented my code, particularly in hard-to-understand areas [ ] I have made corresponding changes to the documentation [ ] My changes generate no new warnings [ ] Any dependent changes have been merged and published in downstream modules View the full article

Description Realtek rtl8723cs driver is spread among various families (sunxi64, rockchip64, rk322x) all carrying around a driver for the same realtek chip. This PR removes the single drivers from each family and consolidate them into a single patchset that is used for all the families around for kernels >= 6.1 What has been done in this PR: main source for driver and patches are sunxi64 megous patches move into patch/misc/wireless-rtl8723cs directory integrate with minor patches from rk322x/rockchip64 families update drivers_network.sh and drivers-harness.sh to apply patches in same order as before remove references from patches.megous and series.conf in sunxi64 remove patches from rk322x and rockchip64 family patches do not touch kernel archives older than 6.1 Jira reference number AR-1586 How Has This Been Tested? [x] Deb kernel packages compiled and tested on rk322x (rtl8703bs chip, rtl8723cs driver): both wireless and bluetooth work fine [x] Deb kernel packages compiled on rockchip64 [x] Deb kernel packages compiled on sunxi64 Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Orange Pi 4 LTS has DDR4 memory banks that always run at full speed. This PR enables the DMC driver in kernel 6.1 to lower the frequency to reduce power usage during idle periods. Benchmarks with a digital multimeter show that the power usage decreases by 200mW when the board is idling. Jira reference number AR-1584 How Has This Been Tested? This is a pre-armbian-next era patch and has been tested to be fully functional. I rebased it successfully on main branch, but requires to be tested not to break the compilation. [ ] compile to produce kernel deb packages Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Due to "recent" fixes to the rk3328 dram memory controller driver (see https://github.com/armbian/build/pull/4774) and tests/benchmarks being made on Rock Pi E board, enable the dmc driver on such CSC board for a nice and free speed bump Jira reference number AR-1585 How Has This Been Tested? The patch is from the pre-armbian-next era and has been tested there to be fully functional, I will check that it does not break compilation on main branch as soon as possible. [ ] compile deb kernel packages on main branch Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

Description Slim down the dmc driver for rk322x for 5.15 and 6.1 kernels: the patch was carrying also the rk3328 driver, but was unnecessary. Also fixes various code misunderstandings that may cause crashes at startup and now uses managed driver resources with devm_* calls in place of doing everything manually. How Has This Been Tested? [x] deb kernel packages compile without errors Checklist: [x] My code follows the style guidelines of this project [x] I have performed a self-review of my own code [x] I have commented my code, particularly in hard-to-understand areas [x] I have made corresponding changes to the documentation [x] My changes generate no new warnings [x] Any dependent changes have been merged and published in downstream modules View the full article

RAKwireless “All-in-One 5G” is a programmable 64-bit Ubuntu indoor device that integrates AGW (access gateway) through a Raspberry Pi CM4 as well as 5G and 4G LTE cellular and LoRaWAN connectivity. The device is powered through its 2.5GbE PoE++ port and designed for private 5G networks for industrial automation, public safety, and transportation, and RAKwireless says you can also “start earning cryptocurrency by providing LTE cellular and LoRa coverage”, but I could not find details about monetization at this time. RAKwireless “All-in-One 5G” specifications: SoM (AGW) – Raspberry Pi CM4 system-on-module with Broadcom BCM2711 quad-core Cortex-A72 processor with 4GB RAM and 32 eMMC flash, WiFi 5 and Bluetooth 5.0 connectivity 5G/4G cellular connectivity LTE Mode- TDD Frequency Bands – Band 48 (3550 MHz to 3700 MHz); band N78 is also supported for global coverage Channel Bandwidth5/10/15/20 MHz Max TX Power – 24 dBm Receiver Sensitivity – -100 dBm Built-in 2-port [...] The post RAKwireless programmable 5G & LoRaWAN small cell device runs Ubuntu on Raspberry Pi CM4 appeared first on CNX Software - Embedded Systems News. View the full article

LibreELEC 11 lightweight media center Linux distribution based on Kodi 20 “Nexus” has just been released with various improvements on x86 and Arm platforms. Kodi 20 was released and available for download in January with AV1 hardware video decoding in Android and x86 (VAAPI) platforms with AV1-capable GPU or VPU, FFMPEG 4.4, Pipewire support in Linux, and a few others. LibreELEC 11 enables you to have a dedicated, and fast booting, HTPC based on a mini PC, a Raspberry Pi SBC, or an Arm-based TV box with all features from the latest Kodi release. LibreELEC 11 supports Raspberry Pi 2 to 4 SBCs, 64-bit x86 hardware, various Allwinner, Rockchip, and Amlogic SBCs and TV boxes with x86, Raspberry Pi, and Rockchip hardware considered more stable and feature complete. LibreELEC 10.0 did away with Amlogic TV boxes and single board computers because of driver issues, but LibreELEC 11.0 brings Amlogic back [...] The post LibreELEC 11 released with Kodi 20, brings back Amlogic platforms appeared first on CNX Software - Embedded Systems News. View the full article

ELECFREAKS micro:bit XGO Robot Kit is a robotic dog designed for robotics education. It moves realistically and acts like a real pet dog, and can help teach various technology concepts related to mechanical engineering, electronics, programming, and artificial intelligence (AI). The kit support both the BBC Micro:bit V1 and V2 boards which can be programmed with Microsoft MakeCode, Python, the Arduino IDE, and other languages. The XGO robot is compact and can be easily used on a desk or table. The robot is made of aluminum metal coated with a beautiful anodized finish. Each leg has 12 high-quality digital servos moving each joint, 3 on each side, totaling 12, helping the robot dog to move smoothly and flexibly. The robot can be controlled with apps, a joystick, and up to 19 ready-made postures, such as holding hands, looking for food, sitting down, squatting, etc… Content of the XGO robot kit: [...] The post Review of micro:bit XGO Robot Kit – An educational robot dog with a Bluetooth joystick appeared first on CNX Software - Embedded Systems News. View the full article