Jump to content

Kaosheng

Members
  • Posts

    5
  • Joined

  • Last visited

  1. Too late to see,i use apt install linux-image,than black screen
  2. Try this [testfolder] comment = Test Folder path = /root/testfolder browseable = yes writeable = yes valid users = mouse
  3. kao@orangepi3-lts:~$ armbianmonitor -u Network/firewall problem detected. Not able to upload debug info. Please fix this or use "-U" instead and upload whole output manually kao@orangepi3-lts:~$ armbianmonitor -U armbian-hardware-monitor.log ### Activated 1 lzo-rle zram swap devices with 994MB each. ### Activated Armbian ramlog partition with zstd compression Thu Jun 23 03:13:46 AM UTC 2022 | Orange Pi 3 LTS | 22.05.3 | arm64 | aarch64 | 5.15.48-sunxi64 ### dmesg: [ 1.271389] ohci-platform: OHCI generic platform driver [ 1.271884] usbcore: registered new interface driver usb-storage [ 1.272440] mousedev: PS/2 mouse device common for all mice [ 1.273452] sun6i-rtc 7000000.rtc: registered as rtc0 [ 1.273485] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-01T00:00:04 UTC (4) [ 1.273599] sun6i-rtc 7000000.rtc: RTC enabled [ 1.273742] i2c_dev: i2c /dev entries driver [ 1.274541] sunxi-wdt 7020400.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.276070] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pm not found, using dummy regulator [ 1.276491] sdhci: Secure Digital Host Controller Interface driver [ 1.276500] sdhci: Copyright(c) Pierre Ossman [ 1.276524] Synopsys Designware Multimedia Card Interface Driver [ 1.277348] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.277525] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pl not found, using dummy regulator [ 1.278836] ledtrig-cpu: registered to indicate activity on CPUs [ 1.279412] sun8i-ce 1904000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.279723] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.279850] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.279963] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.280080] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.280162] sun8i-ce 1904000.crypto: Register cbc(aes) [ 1.280314] sun8i-ce 1904000.crypto: Register ecb(aes) [ 1.280452] sun8i-ce 1904000.crypto: Register cbc(des3_ede) [ 1.280568] sun8i-ce 1904000.crypto: Register ecb(des3_ede) [ 1.280687] sun8i-ce 1904000.crypto: Register md5 [ 1.280795] sun8i-ce 1904000.crypto: Register sha1 [ 1.280905] sun8i-ce 1904000.crypto: Register sha224 [ 1.281020] sun8i-ce 1904000.crypto: Register sha256 [ 1.281127] sun8i-ce 1904000.crypto: Register sha384 [ 1.281232] sun8i-ce 1904000.crypto: Register sha512 [ 1.281398] sun8i-ce 1904000.crypto: Register stdrng [ 1.282121] sun8i-ce 1904000.crypto: CryptoEngine Die ID 0 [ 1.282719] hid: raw HID events driver (C) Jiri Kosina [ 1.282852] usbcore: registered new interface driver usbhid [ 1.282859] usbhid: USB HID core driver [ 1.283588] random: crng init done [ 1.285840] NET: Registered PF_INET6 protocol family [ 1.870798] Freeing initrd memory: 12684K [ 1.899454] Segment Routing with IPv6 [ 1.899519] In-situ OAM (IOAM) with IPv6 [ 1.899604] NET: Registered PF_PACKET protocol family [ 1.899720] 8021q: 802.1Q VLAN Support v1.8 [ 1.899880] 9pnet: Installing 9P2000 support [ 1.899952] Key type dns_resolver registered [ 1.900422] registered taskstats version 1 [ 1.900443] Loading compiled-in X.509 certificates [ 1.904300] Loaded X.509 cert 'Build time autogenerated kernel key: 32330adefd2da02e444296fafd37464380789679' [ 1.907185] zswap: loaded using pool zstd/z3fold [ 1.907825] Key type ._fscrypt registered [ 1.907833] Key type .fscrypt registered [ 1.907837] Key type fscrypt-provisioning registered [ 1.908859] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no [ 1.922659] Key type encrypted registered [ 1.922691] AppArmor: AppArmor sha1 policy hashing enabled [ 1.922730] ima: No TPM chip found, activating TPM-bypass! [ 1.922775] ima: Allocated hash algorithm: sha1 [ 1.922808] ima: No architecture policies found [ 1.922878] evm: Initialising EVM extended attributes: [ 1.922883] evm: security.selinux [ 1.922888] evm: security.SMACK64 [ 1.922892] evm: security.SMACK64EXEC [ 1.922897] evm: security.SMACK64TRANSMUTE [ 1.922901] evm: security.SMACK64MMAP [ 1.922905] evm: security.apparmor [ 1.922909] evm: security.ima [ 1.922913] evm: security.capability [ 1.922917] evm: HMAC attrs: 0x1 [ 1.935969] platform 1100000.mixer: Fixing up cyclic dependency with 6510000.tcon-top [ 1.936305] sun8i-mixer 1100000.mixer: Adding to iommu group 0 [ 1.938389] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.938422] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 1.938574] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f064 hci version 0x100 quirks 0x0000000002010010 [ 1.938635] xhci-hcd xhci-hcd.1.auto: irq 43, io mem 0x05200000 [ 1.939086] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.939102] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.939113] usb usb1: Product: xHCI Host Controller [ 1.939122] usb usb1: Manufacturer: Linux 5.15.48-sunxi64 xhci-hcd [ 1.939130] usb usb1: SerialNumber: xhci-hcd.1.auto [ 1.939679] hub 1-0:1.0: USB hub found [ 1.939724] hub 1-0:1.0: 1 port detected [ 1.940079] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.940099] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 1.940117] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 1.940231] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.940397] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 1.940410] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.940420] usb usb2: Product: xHCI Host Controller [ 1.940428] usb usb2: Manufacturer: Linux 5.15.48-sunxi64 xhci-hcd [ 1.940436] usb usb2: SerialNumber: xhci-hcd.1.auto [ 1.940851] hub 2-0:1.0: USB hub found [ 1.940889] hub 2-0:1.0: 1 port detected [ 1.943532] sun50i_cpufreq_nvmem: Using CPU speed bin speed0 [ 1.945371] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version [ 1.951715] of_cfs_init [ 1.951850] of_cfs_init: OK [ 1.952183] ALSA device list: [ 1.952189] No soundcards found. [ 1.953328] Freeing unused kernel memory: 2496K [ 1.965392] Run /init as init process [ 1.965399] with arguments: [ 1.965405] /init [ 1.965410] with environment: [ 1.965415] HOME=/ [ 1.965419] TERM=linux [ 1.965424] ubootpart=ce3dfe46-01 [ 1.965430] cgroup_enable=memory [ 2.197360] usb 1-1: new full-speed USB device number 2 using xhci-hcd [ 2.352212] usb 1-1: New USB device found, idVendor=045e, idProduct=0745, bcdDevice= 6.33 [ 2.352245] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.352256] usb 1-1: Product: Microsoft® 2.4GHz Transceiver v7.0 [ 2.352264] usb 1-1: Manufacturer: Microsoft [ 2.371628] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:045E:0745.0001/input/input0 [ 2.397833] axp20x-i2c 0-0036: AXP20x variant AXP806 found [ 2.406456] input: axp20x-pek as /devices/platform/soc/7081400.i2c/i2c-0/0-0036/axp221-pek/input/input1 [ 2.430062] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input0 [ 2.434077] vdd-cpu: supplied by vcc-5v [ 2.439356] vdd-gpu: supplied by vcc-5v [ 2.440064] vdd-sys: Bringing 900000uV into 960000-960000uV [ 2.440498] vdd-sys: supplied by vcc-5v [ 2.441417] vcc-dram: supplied by vcc-5v [ 2.442291] vcc-pl-led-ir: supplied by vcc-5v [ 2.443422] vcc33-audio-tv-ephy-mac: Bringing 700000uV into 3300000-3300000uV [ 2.443821] vcc33-audio-tv-ephy-mac: supplied by vcc-5v [ 2.444503] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Mouse as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.1/0003:045E:0745.0002/input/input2 [ 2.444994] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Consumer Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.1/0003:045E:0745.0002/input/input3 [ 2.501752] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input1 [ 2.511185] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Consumer Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.2/0003:045E:0745.0003/input/input4 [ 2.550092] vcc33-io-pd-emmc-sd-usb-uart-1: Bringing 700000uV into 3300000-3300000uV [ 2.550453] vcc33-io-pd-emmc-sd-usb-uart-1: supplied by vcc-5v [ 2.551481] vcc18-dram-bias-pll: supplied by vcc-5v [ 2.552559] vcc-efuse-pcie-hdmi-pc: supplied by vcc-5v [ 2.553234] vcc-wifi-io-pm-pg: Bringing 700000uV into 1800000-1800000uV [ 2.553572] vcc-wifi-io-pm-pg: supplied by vcc-5v [ 2.554668] bldo4: supplied by vcc-5v [ 2.555185] vcc33-io-pd-emmc-sd-usb-uart-2: supplied by vcc-5v [ 2.555987] cldo2: supplied by vcc-5v [ 2.556633] cldo3: supplied by vcc-5v [ 2.556863] sw: supplied by regulator-dummy [ 2.557449] axp20x-i2c 0-0036: AXP20X driver loaded [ 2.570248] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 System Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.2/0003:045E:0745.0003/input/input6 [ 2.570764] hid-generic 0003:045E:0745.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input2 [ 2.574626] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver [ 2.575152] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pb not found, using dummy regulator [ 2.576079] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator [ 2.581609] printk: console [ttyS0] disabled [ 2.581741] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 35, base_baud = 1500000) is a 16550A [ 2.581965] printk: console [ttyS0] enabled [ 2.583370] sun4i-drm display-engine: Adding to iommu group 0 [ 2.602997] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800008e16990) [ 2.603353] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800008e1abb8) [ 2.603765] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800008e11ba0) [ 2.603887] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator [ 2.604602] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY) [ 2.604931] sun8i-dw-hdmi 6000000.hdmi: EVENT=plugin [ 2.605461] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.610057] sun4i-drm display-engine: bound 6000000.hdmi (ops 0xffff800008e15cc8) [ 2.610881] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 [ 2.610942] sun8i-dw-hdmi 6000000.hdmi: read_hpd result: 1 [ 2.765113] Console: switching to colour frame buffer device 240x67 [ 2.814958] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device [ 2.839020] acx00-codec acx00-codec: DMA mask not set [ 2.842787] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator [ 2.844953] sunxi-mmc 4020000.mmc: Got CD GPIO [ 2.845563] vcc-wifi-io: supplied by vcc33-wifi [ 2.847905] ehci-platform 5101000.usb: EHCI Host Controller [ 2.847948] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 3 [ 2.848105] ehci-platform 5101000.usb: irq 41, io mem 0x05101000 [ 2.857343] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 2.861347] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00 [ 2.861683] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.861698] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.861709] usb usb3: Product: EHCI Host Controller [ 2.861717] usb usb3: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd [ 2.861726] usb usb3: SerialNumber: 5101000.usb [ 2.862270] hub 3-0:1.0: USB hub found [ 2.862312] hub 3-0:1.0: 1 port detected [ 2.863447] ehci-platform 5311000.usb: EHCI Host Controller [ 2.863501] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 4 [ 2.863651] ehci-platform 5311000.usb: irq 44, io mem 0x05311000 [ 2.869618] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 2.877334] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00 [ 2.877662] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.877677] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.877687] usb usb4: Product: EHCI Host Controller [ 2.877696] usb usb4: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd [ 2.877704] usb usb4: SerialNumber: 5311000.usb [ 2.878275] hub 4-0:1.0: USB hub found [ 2.878317] hub 4-0:1.0: 1 port detected [ 2.879527] ohci-platform 5101400.usb: Generic Platform OHCI controller [ 2.879591] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 5 [ 2.879731] ohci-platform 5101400.usb: irq 42, io mem 0x05101400 [ 2.904258] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.906028] mmc0: Problem switching card into high-speed mode! [ 2.906141] mmc0: new SDHC card at address 0001 [ 2.907012] mmcblk0: mmc0:0001 USD 29.8 GiB [ 2.909094] mmcblk0: p1 [ 2.941592] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 2.941618] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.941629] usb usb5: Product: Generic Platform OHCI controller [ 2.941637] usb usb5: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd [ 2.941646] usb usb5: SerialNumber: 5101400.usb [ 2.942382] hub 5-0:1.0: USB hub found [ 2.942478] hub 5-0:1.0: 1 port detected [ 2.943732] ohci-platform 5311400.usb: Generic Platform OHCI controller [ 2.943797] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 6 [ 2.943945] ohci-platform 5311400.usb: irq 45, io mem 0x05311400 [ 2.997466] mmc2: new HS200 MMC card at address 0001 [ 2.998519] mmcblk2: mmc2:0001 8GTF4R 7.28 GiB [ 3.000828] mmcblk2boot0: mmc2:0001 8GTF4R 4.00 MiB [ 3.002395] mmcblk2boot1: mmc2:0001 8GTF4R 4.00 MiB [ 3.005697] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 3.005727] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.005738] usb usb6: Product: Generic Platform OHCI controller [ 3.005746] usb usb6: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd [ 3.005755] usb usb6: SerialNumber: 5311400.usb [ 3.006413] hub 6-0:1.0: USB hub found [ 3.006468] hub 6-0:1.0: 1 port detected [ 3.007749] usb_phy_generic usb_phy_generic.4.auto: supply vcc not found, using dummy regulator [ 3.007972] usb_phy_generic usb_phy_generic.4.auto: dummy supplies not allowed for exclusive requests [ 3.109696] musb-hdrc musb-hdrc.5.auto: MUSB HDRC host driver [ 3.109741] musb-hdrc musb-hdrc.5.auto: new USB bus registered, assigned bus number 7 [ 3.110006] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 3.110022] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.110032] usb usb7: Product: MUSB HDRC host driver [ 3.110041] usb usb7: Manufacturer: Linux 5.15.48-sunxi64 musb-hcd [ 3.110049] usb usb7: SerialNumber: musb-hdrc.5.auto [ 3.110654] hub 7-0:1.0: USB hub found [ 3.110724] hub 7-0:1.0: 1 port detected [ 3.130721] dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found [ 3.130747] dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found [ 3.131045] dwmac-sun8i 5020000.ethernet: supply phy-io not found, using dummy regulator [ 3.131271] dwmac-sun8i 5020000.ethernet: PTP uses main clock [ 3.131313] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 50000) [ 3.237621] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported [ 3.237647] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported [ 3.237655] dwmac-sun8i 5020000.ethernet: COE Type 2 [ 3.237666] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported [ 3.237673] dwmac-sun8i 5020000.ethernet: Normal descriptors [ 3.237680] dwmac-sun8i 5020000.ethernet: Chain mode enabled [ 3.478371] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null). Quota mode: none. [ 3.673352] usb 5-1: new full-speed USB device number 2 using ohci-platform [ 3.910374] usb 5-1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10 [ 3.910404] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.910415] usb 5-1: Product: USB Receiver [ 3.910424] usb 5-1: Manufacturer: Logitech [ 3.919527] input: Logitech USB Receiver as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.0/0003:046D:C52B.0004/input/input7 [ 3.977996] hid-generic 0003:046D:C52B.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-5101400.usb-1/input0 [ 3.984266] input: Logitech USB Receiver Mouse as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input8 [ 3.984724] input: Logitech USB Receiver Consumer Control as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input9 [ 4.041716] input: Logitech USB Receiver System Control as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input10 [ 4.042095] hid-generic 0003:046D:C52B.0005: input,hiddev97,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-5101400.usb-1/input1 [ 4.046730] hid-generic 0003:046D:C52B.0006: hiddev98,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-5101400.usb-1/input2 [ 4.781944] systemd[1]: System time before build time, advancing clock. [ 4.870091] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq [ 4.879064] systemd[1]: systemd 249.11-0ubuntu3.1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 4.879739] systemd[1]: Detected architecture arm64. [ 4.883086] systemd[1]: Hostname set to <orangepi3-lts>. [ 5.105388] sunxi-mmc 4021000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 5.122726] mmc1: new high speed SDIO card at address 8800 [ 6.193555] systemd[1]: Queued start job for default target Graphical Interface. [ 6.199452] systemd[1]: Created slice Slice /system/modprobe. [ 6.202231] systemd[1]: Created slice Slice /system/serial-getty. [ 6.204080] systemd[1]: Created slice User and Session Slice. [ 6.204943] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.206453] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.207405] systemd[1]: Reached target Remote File Systems. [ 6.207760] systemd[1]: Reached target Slice Units. [ 6.208108] systemd[1]: Reached target Swaps. [ 6.208409] systemd[1]: Reached target System Time Set. [ 6.208987] systemd[1]: Reached target Local Verity Protected Volumes. [ 6.210061] systemd[1]: Listening on Syslog Socket. [ 6.210934] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.211571] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.212959] systemd[1]: Listening on Journal Audit Socket. [ 6.213968] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.215050] systemd[1]: Listening on Journal Socket. [ 6.226846] systemd[1]: Listening on udev Control Socket. [ 6.227964] systemd[1]: Listening on udev Kernel Socket. [ 6.232507] systemd[1]: Mounting Huge Pages File System... [ 6.237816] systemd[1]: Mounting POSIX Message Queue File System... [ 6.243581] systemd[1]: Mounting Kernel Debug File System... [ 6.244898] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 6.252149] systemd[1]: Starting Restore / save the current clock... [ 6.257902] systemd[1]: Starting Set the console keyboard layout... [ 6.264301] systemd[1]: Starting Create List of Static Device Nodes... [ 6.270918] systemd[1]: Starting Load Kernel Module configfs... [ 6.277786] systemd[1]: Starting Load Kernel Module drm... [ 6.284675] systemd[1]: Starting Load Kernel Module fuse... [ 6.292060] systemd[1]: Started Nameserver information manager. [ 6.293725] systemd[1]: Reached target Preparation for Network. [ 6.294932] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 6.306924] systemd[1]: Starting Load Kernel Modules... [ 6.312706] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.318432] systemd[1]: Starting Coldplug All udev Devices... [ 6.328490] systemd[1]: Mounted Huge Pages File System. [ 6.329589] fuse: init (API version 7.34) [ 6.330211] systemd[1]: Mounted POSIX Message Queue File System. [ 6.331670] systemd[1]: Mounted Kernel Debug File System. [ 6.334979] systemd[1]: Finished Restore / save the current clock. [ 6.338419] systemd[1]: Finished Create List of Static Device Nodes. [ 6.340843] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 6.342500] systemd[1]: Finished Load Kernel Module configfs. [ 6.344775] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 6.346521] systemd[1]: Finished Load Kernel Module drm. [ 6.348776] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 6.350118] systemd[1]: Finished Load Kernel Module fuse. [ 6.357102] systemd[1]: Mounting FUSE Control File System... [ 6.363222] systemd[1]: Mounting Kernel Configuration File System... [ 6.371020] systemd[1]: Mounted FUSE Control File System. [ 6.374967] systemd[1]: Mounted Kernel Configuration File System. [ 6.387839] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none. [ 6.393209] systemd[1]: Finished Remount Root and Kernel File Systems. [ 6.394291] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 6.398918] systemd[1]: Starting Load/Save Random Seed... [ 6.404754] systemd[1]: Starting Create System Users... [ 6.605011] WCN: marlin_init entry! [ 6.605666] WCN: wcn config bt wake host [ 6.605940] WCN_ERR: dts node for bt_wake not found [ 6.605943] WCN: marlin2 parse_dt some para not config [ 6.605957] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 [ 6.613551] sdiohal:sdiohal_init ok [ 6.614342] WCN: marlin_probe ok! [ 6.615383] systemd[1]: Finished Load/Save Random Seed. [ 6.616503] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 6.629638] mtty_probe init device addr: 0x00000000e4ddf53f [ 6.629847] -->rfkill_bluetooth_init [ 6.629985] bluetooth_set_power: start_block=1 [ 6.629996] WCN: marlin power state:0, subsys: [MARLIN_BLUETOOTH] power 0 [ 6.630006] bluetooth_set_power: end_block=1 [ 6.630024] <--rfkill_bluetooth_init [ 6.642377] systemd[1]: Finished Create System Users. [ 6.648577] systemd[1]: Starting Create Static Device Nodes in /dev... [ 6.718136] systemd[1]: Finished Set the console keyboard layout. [ 6.724088] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.725783] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.746999] [ADDR_MGT] addr_mgt_probe: module version: v1.0.9 [ 6.747155] [ADDR_MGT] addr_mgt_probe: success. [ 6.812225] WCN: start_marlin [MARLIN_WIFI] [ 6.812252] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 [ 6.812260] WCN: the first power on start [ 6.818045] systemd[1]: Finished Create Static Device Nodes in /dev. [ 6.825520] systemd[1]: Reached target Preparation for Local File Systems. [ 6.837722] systemd[1]: Mounting /tmp... [ 6.851964] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 6.862991] systemd[1]: Mounted /tmp. [ 6.870324] systemd[1]: Reached target Local File Systems. [ 6.882576] systemd[1]: Starting Armbian leds state... [ 6.895047] systemd[1]: Starting Armbian ZRAM config... [ 6.907291] systemd[1]: Starting Set console font and keymap... [ 6.917410] WCN: marlin chip en dummy pull up -- need manually set GPIO [ 6.919805] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... [ 6.943858] systemd[1]: Starting Set Up Additional Binary Formats... [ 6.945374] sdiohal:sdiohal_scan_card [ 6.945565] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=50000000 [ 6.945658] WCN: marlin_scan_finish! [ 6.945663] sdiohal:probe ok [ 6.945774] sdiohal:scan end! [ 6.945780] WCN: then marlin start to download [ 6.946019] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 [ 6.946032] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! [ 6.952293] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 6.952618] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 6.955861] systemd[1]: Finished Set console font and keymap. [ 6.968835] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 362 (systemd-binfmt) [ 6.974598] systemd[1]: Mounting Arbitrary Executable File Formats File System... [ 6.993966] systemd[1]: Finished Coldplug All udev Devices. [ 7.002822] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data. [ 7.098961] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ 7.109231] systemd[1]: Mounted Arbitrary Executable File Formats File System. [ 7.132532] systemd[1]: Finished Set Up Additional Binary Formats. [ 7.160398] systemd[1]: Finished Helper to synchronize boot up for ifupdown. [ 7.209436] systemd[1]: Finished Armbian leds state. [ 7.513983] systemd[1]: Started Rule-based Manager for Device Events and Files. [ 7.521754] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 7.522417] systemd[1]: Started Dispatch Password Requests to Console Directory Watch when bootsplash is active. [ 7.533479] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 7.533648] systemd[1]: Reached target Local Encrypted Volumes. [ 7.575897] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 7.627231] systemd[1]: Starting Load/Save RF Kill Switch Status... [ 7.777051] systemd[1]: Started Load/Save RF Kill Switch Status. [ 7.954890] systemd[1]: Found device /dev/ttyS0. [ 8.014195] panfrost 1800000.gpu: clock rate = 432000000 [ 8.014230] panfrost 1800000.gpu: bus_clock rate = 100000000 [ 8.014548] panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0 [ 8.014559] panfrost 1800000.gpu: features: 00000000,10309e40, issues: 00000000,21054400 [ 8.014566] panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7 [ 8.014573] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1 [ 8.014613] WCN: combin_img 0 marlin_firmware_write finish and successful [ 8.014901] WCN: marlin_start_run read reset reg val:0x1 [ 8.014906] WCN: after do marlin_start_run reset reg val:0x0 [ 8.015080] WCN: s_marlin_bootup_time=8015079802 [ 8.015466] [drm] Initialized panfrost 1.2.0 20180908 for 1800000.gpu on minor 1 [ 8.021616] WCN: clock mode: TSX [ 8.021814] WCN: marlin_write_cali_data sync init_state:0x91036042 [ 8.049599] WCN: marlin_write_cali_data sync init_state:0x91036042 [ 8.068392] mc: Linux media interface: v0.10 [ 8.077689] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1 [ 8.077720] WCN: sdio_config bt_wake_host trigger:[high] [ 8.077723] WCN: sdio_config irq:[inband] [ 8.077725] WCN: sdio_config wake_host_level_duration_time:[20ms] [ 8.077731] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse] [ 8.077733] WCN: marlin_send_sdio_config_to_cp sdio_config:0x80f01 (enable config) [ 8.078060] WCN: marlin_write_cali_data finish [ 8.078227] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.105573] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.137562] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.165584] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.184903] videodev: Linux video capture interface: v2.00 [ 8.193587] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0 [ 8.193612] WCN: marlin_bind_verify confuse data: 0x33fea07bef5424afb3eb92a5307b8c0e [ 8.193627] WCN: marlin_bind_verify verify data: 0xbe88975721254815cb97ad470d21e601 [ 8.194121] WCN: check_cp_ready sync val:0xf0f0f0f7, prj_type val:0x0 [ 8.221621] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0 [ 8.221645] sdiohal:sdiohal_runtime_get entry [ 8.224117] WCN: get_cp2_version entry! [ 8.268773] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~ [ 8.268824] WCN: switch_cp2_log - close entry! [ 8.270121] WCN: WCND at cmd read:OK [ 8.270208] WCN: then marlin download finished and run ok [ 8.270214] WCN: start_loopcheck [ 8.288538] WCN: get_board_ant_num [one_ant] [ 8.288563] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini [ 8.357396] Registered IR keymap rc-empty [ 8.357535] rc rc0: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0 [ 8.358087] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter [ 8.358296] input: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0/input12 [ 8.358715] sunxi-ir 7040000.ir: initialized sunXi IR driver [ 8.379249] zram: Added device: zram0 [ 8.379675] zram: Added device: zram1 [ 8.380117] zram: Added device: zram2 [ 8.410616] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings. [ 8.416810] systemd[1]: Finished Load Kernel Modules. [ 8.425572] systemd[1]: Starting Apply Kernel Variables... [ 8.502238] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned. [ 8.503493] cedrus 1c0e000.video-codec: Adding to iommu group 0 [ 8.509361] cedrus 1c0e000.video-codec: Device registered as /dev/video0 [ 8.569078] systemd[1]: Finished Apply Kernel Variables. [ 8.615426] zram0: detected capacity change from 0 to 2037304 [ 8.633094] systemd[1]: Starting Raise network interfaces... [ 8.650146] Adding 1018648k swap on /dev/zram0. Priority:5 extents:1 across:1018648k SSFS [ 8.824826] logitech-djreceiver 0003:046D:C52B.0006: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-5101400.usb-1/input2 [ 8.894117] zram1: detected capacity change from 0 to 102400 [ 8.958383] input: Logitech Wireless Device PID:4004 Keyboard as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.2/0003:046D:C52B.0006/0003:046D:4004.0007/input/input13 [ 9.009858] hid-generic 0003:046D:4004.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4004] on usb-5101400.usb-1/input2:1 [ 9.036255] systemd[1]: Finished Armbian ZRAM config. [ 9.044253] systemd[1]: Starting Armbian memory supported logging... [ 9.171018] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard. Quota mode: none. [ 9.198787] input: Logitech K360 as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.2/0003:046D:C52B.0006/0003:046D:4004.0007/input/input17 [ 9.199362] logitech-hidpp-device 0003:046D:4004.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K360] on usb-5101400.usb-1/input2:1 [ 9.697942] systemd[1]: Finished Raise network interfaces. [ 9.704493] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 9.704773] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 9.705128] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 9.710522] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 9.710654] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 9.710772] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 9.710855] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 9.857115] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 9.857354] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 9.857432] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 9.857521] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 9.857622] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 9.857735] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 11.391375] systemd[1]: Finished Armbian memory supported logging. [ 11.400571] systemd[1]: Starting Journal Service... [ 11.544107] systemd[1]: Started Journal Service. [ 11.573374] systemd-journald[677]: Received client request to flush runtime journal. ### armbian-release: # PLEASE DO NOT EDIT THIS FILE BOARD=orangepi3-lts BOARD_NAME="Orange Pi 3 LTS" BOARDFAMILY=sun50iw6 BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=13f5fba13c VERSION=22.05.3 LINUXFAMILY=sunxi64 ARCH=arm64 IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=stable ### boot environment: verbosity=1 bootlogo=false console=both disp_mode=1920x1080p60 overlay_prefix=sun50i-h6 rootdev=UUID=71b44a6c-5bb8-4352-afe7-d22b8e62de4c rootfstype=ext4 ### lsusb: Thu Jun 23 03:13:46 AM UTC 2022 | Orange Pi 3 LTS | 22.05.3 | arm64 | aarch64 | 5.15.48-sunxi64 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ### lscpu: Architecture: aarch64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Vendor ID: ARM Model name: Cortex-A53 Model: 4 Thread(s) per core: 1 Core(s) per cluster: 4 Socket(s): - Cluster(s): 1 Stepping: r0p4 CPU max MHz: 1800.0000 CPU min MHz: 480.0000 BogoMIPS: 48.00 Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid NUMA node(s): 1 NUMA node0 CPU(s): 0-3 Vulnerability Itlb multihit: Not affected Vulnerability L1tf: Not affected Vulnerability Mds: Not affected Vulnerability Meltdown: Not affected Vulnerability Mmio stale data: Not affected Vulnerability Spec store bypass: Not affected Vulnerability Spectre v1: Mitigation; __user pointer sanitization Vulnerability Spectre v2: Not affected Vulnerability Srbds: Not affected Vulnerability Tsx async abort: Not affected ### cpuinfo: processor : 0 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 1 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 2 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 3 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 ### meminfo: MemTotal: 2037300 kB MemFree: 1849616 kB MemAvailable: 1851652 kB Buffers: 11672 kB Cached: 50624 kB SwapCached: 0 kB Active: 31520 kB Inactive: 51264 kB Active(anon): 444 kB Inactive(anon): 23568 kB Active(file): 31076 kB Inactive(file): 27696 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 1018648 kB SwapFree: 1018648 kB Dirty: 1676 kB Writeback: 0 kB AnonPages: 20500 kB Mapped: 16968 kB Shmem: 3392 kB KReclaimable: 10432 kB Slab: 45848 kB SReclaimable: 10432 kB SUnreclaim: 35416 kB KernelStack: 2512 kB PageTables: 1688 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2037296 kB Committed_AS: 43924 kB VmallocTotal: 133143592960 kB VmallocUsed: 22764 kB VmallocChunk: 0 kB Percpu: 976 kB AnonHugePages: 0 kB ShmemHugePages: 0 kB ShmemPmdMapped: 0 kB FileHugePages: 0 kB FilePmdMapped: 0 kB CmaTotal: 131072 kB CmaFree: 128768 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB Hugetlb: 0 kB ### virtual memory: vm.admin_reserve_kbytes = 8192 vm.compaction_proactiveness = 20 vm.compact_unevictable_allowed = 1 vm.dirty_background_bytes = 0 vm.dirty_background_ratio = 10 vm.dirty_bytes = 0 vm.dirty_expire_centisecs = 3000 vm.dirty_ratio = 20 vm.dirtytime_expire_seconds = 43200 vm.dirty_writeback_centisecs = 500 vm.extfrag_threshold = 500 vm.hugetlb_shm_group = 0 vm.laptop_mode = 0 vm.legacy_va_layout = 0 vm.lowmem_reserve_ratio = 256 256 32 0 vm.max_map_count = 65530 vm.min_free_kbytes = 22528 vm.min_slab_ratio = 5 vm.min_unmapped_ratio = 1 vm.mmap_min_addr = 32768 vm.mmap_rnd_bits = 18 vm.mmap_rnd_compat_bits = 11 vm.nr_hugepages = 0 vm.nr_hugepages_mempolicy = 0 vm.nr_overcommit_hugepages = 0 vm.numa_stat = 1 vm.numa_zonelist_order = Node vm.oom_dump_tasks = 1 vm.oom_kill_allocating_task = 0 vm.overcommit_kbytes = 0 vm.overcommit_memory = 0 vm.overcommit_ratio = 50 vm.page-cluster = 0 vm.page_lock_unfairness = 5 vm.panic_on_oom = 0 vm.percpu_pagelist_high_fraction = 0 vm.stat_interval = 1 vm.swappiness = 100 vm.user_reserve_kbytes = 63009 vm.vfs_cache_pressure = 100 vm.watermark_boost_factor = 15000 vm.watermark_scale_factor = 10 vm.zone_reclaim_mode = 0 ### ip addr: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 02:07:29:30:86:8c brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:32:c3:9f:6a:08 brd ff:ff:ff:ff:ff:ff ### partitions: major minor #blocks name 179 0 31205376 mmcblk0 179 1 6500352 mmcblk0p1 179 32 7634944 mmcblk2 252 0 1018652 zram0 252 1 51200 zram1 ### df: tmpfs 199M 3.4M 196M 2% /run /dev/mmcblk0p1 6.0G 4.9G 1.1G 83% / tmpfs 995M 0 995M 0% /dev/shm tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 995M 0 995M 0% /tmp /dev/zram1 47M 1.6M 42M 4% /var/log ### lsblk: NAME FSTYPE SIZE MOUNTPOINT UUID mmcblk0 29.8G └─mmcblk0p1 ext4 6.2G / 71b44a6c-5bb8-4352-afe7-d22b8e62de4c mmcblk2 swap 7.3G 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 mmcblk2boot0 swap 4M 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 mmcblk2boot1 swap 4M 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 zram1 50M /var/log zram2 0B ### zramctl: NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT /dev/zram1 zstd 50M 68K 728B 44K 4 /var/log /dev/zram0 lzo-rle 994.8M 4K 74B 12K 4 [SWAP] ### mtab: /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 ### [resize2fs] Leaving 1% spare area. Start resizing partition /dev/mmcblk0p1 now: major minor #blocks name 179 0 31205376 mmcblk0 179 1 6500352 mmcblk0p1 179 32 7634944 mmcblk2 252 0 1018652 zram0 252 1 51200 zram1 Executing fdisk, fsck and partprobe: Welcome to fdisk (util-linux 2.37.2). Changes will remain in memory only, until you decide to write them. Be careful before using the write command. This disk is currently in use - repartitioning is probably a bad idea. It's recommended to umount all file systems, and swapoff all swap partitions on this disk. Command (m for help): Selected partition 1 Partition 1 has been deleted. Command (m for help): Partition type p primary (0 primary, 0 extended, 4 free) e extended (container for logical partitions) Select (default p): Partition number (1-4, default 1): First sector (2048-62410751, default 2048): Last sector, +/-sectors or +/-size{K,M,G,T,P} (8192-62410751, default 62410751): Created a new partition 1 of type 'Linux' and of size 29.4 GiB. Partition #1 contains a ext4 signature. Command (m for help): ### mmc0:0001 info: fwrev: 0x0 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=USD MODALIAS=mmc:block cid: 1d414455534400001000005ae0016181 rca: 0x0001 csd: 400e00325b590000ee137f800a40004d manfid: 0x00001d ocr: 0x00200000 preferred_erase_size: 4194304 type: SD hwrev: 0x1 date: 01/2022 dsr: 0x404 The partition table has been altered. Syncing disks. erase_size: 512 oemid: 0x4144 serial: 0x00005ae0 ssr: 000000000500000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 scr: 02b5808200000000 name: USD ### mmc2:0001 info: fwrev: 0x0600000000000000 uevent: DRIVER=mmcblk MMC_TYPE=MMC MMC_NAME=8GTF4R MODALIAS=mmc:block New partition table: cid: 15010038475446345206d410e21fc801 major minor #blocks name 179 0 31205376 mmcblk0 179 1 30879744 mmcblk0p1 179 32 7634944 mmcblk2 252 0 1018652 zram0 252 1 51200 zram1 Now trying to resize ext4 filesystem on /dev/mmcblk0p1 to the limits: rel_sectors: 0x1 resize2fs 1.46.5 (30-Dec-2021) enhanced_rpmb_supported: 0x1 rca: 0x0001 pre_eol_info: 0x01 csd: d02701320f5903fff6dbffef8e40400d manfid: 0x000015 ocr: 0x00200000 preferred_erase_size: 4194304 enhanced_area_offset: 18446744073709551594 raw_rpmb_size_mult: 0x4 type: MMC hwrev: 0x0 date: 12/2021 prv: 0x6 ffu_capable: 1 dsr: 0x404 erase_size: 524288 life_time: 0x01 0x01 enhanced_area_size: 4294967274 oemid: 0x0100 serial: 0xd410e21f cmdq_en: 0 rev: 0x8 name: 8GTF4R ### Boot system health: Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 03:13:49: 1080MHz 1.34 51% 19% 13% 0% 18% 0% 49.3°C 0/9 03:13:50: 1080MHz 1.71 53% 7% 3% 0% 42% 0% 48.5°C 0/9 03:13:50: 1488MHz 1.71 35% 9% 2% 0% 22% 0% 48.7°C 0/9 03:13:50: 1080MHz 1.71 32% 8% 2% 0% 20% 0% 48.7°C 0/9 03:13:51: 1080MHz 1.71 35% 8% 4% 1% 21% 0% 49.1°C 0/9 Filesystem at /dev/mmcblk0p1 is mounted on /; on-line resizing required old_desc_blocks = 1, new_desc_blocks = 2 The filesystem on /dev/mmcblk0p1 is now 7719936 (4k) blocks long. ### [resize2fs] Start resizing ext4 partition /dev/mmcblk0p1 now resize2fs 1.46.5 (30-Dec-2021) The filesystem is already 7719936 (4k) blocks long. Nothing to do! ### quick iozone test: 4 144 824 6811 6817 6446 2242 ### [firstrun] Recreated SSH keys (entropy: 256 256) ### Activated 1 lzo-rle zram swap devices with 994MB each. ### Activated Armbian ramlog partition with zstd compression Thu Jun 23 11:40:42 AM CST 2022 | Orange Pi 3 LTS | 22.05.3 | arm64 | aarch64 | 5.15.48-sunxi64 ### dmesg: [ 1.272840] i2c_dev: i2c /dev entries driver [ 1.273687] sunxi-wdt 7020400.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.275263] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pm not found, using dummy regulator [ 1.275681] sdhci: Secure Digital Host Controller Interface driver [ 1.275689] sdhci: Copyright(c) Pierre Ossman [ 1.275714] Synopsys Designware Multimedia Card Interface Driver [ 1.276505] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.276668] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pl not found, using dummy regulator [ 1.277837] ledtrig-cpu: registered to indicate activity on CPUs [ 1.278440] sun8i-ce 1904000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.278705] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.278843] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.278941] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.279034] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.279118] sun8i-ce 1904000.crypto: Register cbc(aes) [ 1.279270] sun8i-ce 1904000.crypto: Register ecb(aes) [ 1.279382] sun8i-ce 1904000.crypto: Register cbc(des3_ede) [ 1.279491] sun8i-ce 1904000.crypto: Register ecb(des3_ede) [ 1.279598] sun8i-ce 1904000.crypto: Register md5 [ 1.279710] sun8i-ce 1904000.crypto: Register sha1 [ 1.279822] sun8i-ce 1904000.crypto: Register sha224 [ 1.279933] sun8i-ce 1904000.crypto: Register sha256 [ 1.280039] sun8i-ce 1904000.crypto: Register sha384 [ 1.280147] sun8i-ce 1904000.crypto: Register sha512 [ 1.280254] sun8i-ce 1904000.crypto: Register stdrng [ 1.280979] sun8i-ce 1904000.crypto: CryptoEngine Die ID 0 [ 1.281617] hid: raw HID events driver (C) Jiri Kosina [ 1.281760] usbcore: registered new interface driver usbhid [ 1.281768] usbhid: USB HID core driver [ 1.282505] random: crng init done [ 1.284692] NET: Registered PF_INET6 protocol family [ 1.870669] Freeing initrd memory: 12684K [ 1.899337] Segment Routing with IPv6 [ 1.899410] In-situ OAM (IOAM) with IPv6 [ 1.899505] NET: Registered PF_PACKET protocol family [ 1.899615] 8021q: 802.1Q VLAN Support v1.8 [ 1.899772] 9pnet: Installing 9P2000 support [ 1.899846] Key type dns_resolver registered [ 1.900287] registered taskstats version 1 [ 1.900304] Loading compiled-in X.509 certificates [ 1.904160] Loaded X.509 cert 'Build time autogenerated kernel key: 32330adefd2da02e444296fafd37464380789679' [ 1.907062] zswap: loaded using pool zstd/z3fold [ 1.907708] Key type ._fscrypt registered [ 1.907716] Key type .fscrypt registered [ 1.907721] Key type fscrypt-provisioning registered [ 1.908736] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no [ 1.922610] Key type encrypted registered [ 1.922643] AppArmor: AppArmor sha1 policy hashing enabled [ 1.922683] ima: No TPM chip found, activating TPM-bypass! [ 1.922711] ima: Allocated hash algorithm: sha1 [ 1.922743] ima: No architecture policies found [ 1.922791] evm: Initialising EVM extended attributes: [ 1.922796] evm: security.selinux [ 1.922800] evm: security.SMACK64 [ 1.922805] evm: security.SMACK64EXEC [ 1.922809] evm: security.SMACK64TRANSMUTE [ 1.922813] evm: security.SMACK64MMAP [ 1.922818] evm: security.apparmor [ 1.922822] evm: security.ima [ 1.922826] evm: security.capability [ 1.922830] evm: HMAC attrs: 0x1 [ 1.935894] platform 1100000.mixer: Fixing up cyclic dependency with 6510000.tcon-top [ 1.936246] sun8i-mixer 1100000.mixer: Adding to iommu group 0 [ 1.938307] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.938338] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 1.938483] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f064 hci version 0x100 quirks 0x0000000002010010 [ 1.938551] xhci-hcd xhci-hcd.1.auto: irq 43, io mem 0x05200000 [ 1.939042] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.939058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.939069] usb usb1: Product: xHCI Host Controller [ 1.939077] usb usb1: Manufacturer: Linux 5.15.48-sunxi64 xhci-hcd [ 1.939086] usb usb1: SerialNumber: xhci-hcd.1.auto [ 1.939617] hub 1-0:1.0: USB hub found [ 1.939666] hub 1-0:1.0: 1 port detected [ 1.940002] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.940022] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 1.940045] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 1.940139] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.940297] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 1.940310] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.940321] usb usb2: Product: xHCI Host Controller [ 1.940329] usb usb2: Manufacturer: Linux 5.15.48-sunxi64 xhci-hcd [ 1.940337] usb usb2: SerialNumber: xhci-hcd.1.auto [ 1.940741] hub 2-0:1.0: USB hub found [ 1.940778] hub 2-0:1.0: 1 port detected [ 1.943495] sun50i_cpufreq_nvmem: Using CPU speed bin speed0 [ 1.945277] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version [ 1.951649] of_cfs_init [ 1.951764] of_cfs_init: OK [ 1.952094] ALSA device list: [ 1.952101] No soundcards found. [ 1.953207] Freeing unused kernel memory: 2496K [ 1.977591] Run /init as init process [ 1.977600] with arguments: [ 1.977606] /init [ 1.977612] with environment: [ 1.977616] HOME=/ [ 1.977621] TERM=linux [ 1.977626] ubootpart=ce3dfe46-01 [ 1.977631] cgroup_enable=memory [ 2.193555] usb 1-1: new full-speed USB device number 2 using xhci-hcd [ 2.359296] usb 1-1: New USB device found, idVendor=045e, idProduct=0745, bcdDevice= 6.33 [ 2.359334] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.359345] usb 1-1: Product: Microsoft® 2.4GHz Transceiver v7.0 [ 2.359353] usb 1-1: Manufacturer: Microsoft [ 2.380572] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:045E:0745.0001/input/input0 [ 2.405951] axp20x-i2c 0-0036: AXP20x variant AXP806 found [ 2.416250] input: axp20x-pek as /devices/platform/soc/7081400.i2c/i2c-0/0-0036/axp221-pek/input/input1 [ 2.440095] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input0 [ 2.444209] vdd-cpu: supplied by vcc-5v [ 2.445995] vdd-gpu: supplied by vcc-5v [ 2.446737] vdd-sys: Bringing 900000uV into 960000-960000uV [ 2.447163] vdd-sys: supplied by vcc-5v [ 2.448220] vcc-dram: supplied by vcc-5v [ 2.449137] vcc-pl-led-ir: supplied by vcc-5v [ 2.450174] vcc33-audio-tv-ephy-mac: Bringing 700000uV into 3300000-3300000uV [ 2.450587] vcc33-audio-tv-ephy-mac: supplied by vcc-5v [ 2.457417] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Mouse as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.1/0003:045E:0745.0002/input/input2 [ 2.458172] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Consumer Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.1/0003:045E:0745.0002/input/input3 [ 2.517969] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input1 [ 2.530047] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Consumer Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.2/0003:045E:0745.0003/input/input4 [ 2.558277] vcc33-io-pd-emmc-sd-usb-uart-1: Bringing 700000uV into 3300000-3300000uV [ 2.558638] vcc33-io-pd-emmc-sd-usb-uart-1: supplied by vcc-5v [ 2.559627] vcc18-dram-bias-pll: supplied by vcc-5v [ 2.560734] vcc-efuse-pcie-hdmi-pc: supplied by vcc-5v [ 2.561386] vcc-wifi-io-pm-pg: Bringing 700000uV into 1800000-1800000uV [ 2.561719] vcc-wifi-io-pm-pg: supplied by vcc-5v [ 2.562819] bldo4: supplied by vcc-5v [ 2.563341] vcc33-io-pd-emmc-sd-usb-uart-2: supplied by vcc-5v [ 2.564136] cldo2: supplied by vcc-5v [ 2.564801] cldo3: supplied by vcc-5v [ 2.565035] sw: supplied by regulator-dummy [ 2.565598] axp20x-i2c 0-0036: AXP20X driver loaded [ 2.579120] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver [ 2.579642] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pb not found, using dummy regulator [ 2.580524] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator [ 2.581205] printk: console [ttyS0] disabled [ 2.581316] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 35, base_baud = 1500000) is a 16550A [ 2.581600] printk: console [ttyS0] enabled [ 2.582895] sun4i-drm display-engine: Adding to iommu group 0 [ 2.589957] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 System Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.2/0003:045E:0745.0003/input/input6 [ 2.590397] hid-generic 0003:045E:0745.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input2 [ 2.602524] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800008e16990) [ 2.602880] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800008e1abb8) [ 2.603276] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800008e11ba0) [ 2.603403] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator [ 2.603905] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY) [ 2.604269] sun8i-dw-hdmi 6000000.hdmi: EVENT=plugin [ 2.608442] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.608956] sun4i-drm display-engine: bound 6000000.hdmi (ops 0xffff800008e15cc8) [ 2.609998] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 [ 2.610059] sun8i-dw-hdmi 6000000.hdmi: read_hpd result: 1 [ 2.766758] Console: switching to colour frame buffer device 240x67 [ 2.816582] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device [ 2.837317] acx00-codec acx00-codec: DMA mask not set [ 2.841040] vcc-wifi-io: supplied by vcc33-wifi [ 2.841454] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator [ 2.842711] sunxi-mmc 4020000.mmc: Got CD GPIO [ 2.846375] ehci-platform 5101000.usb: EHCI Host Controller [ 2.846421] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 3 [ 2.846575] ehci-platform 5101000.usb: irq 41, io mem 0x05101000 [ 2.848622] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq [ 2.865562] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00 [ 2.865575] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 2.865860] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 2.865911] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.865925] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.865936] usb usb3: Product: EHCI Host Controller [ 2.865945] usb usb3: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd [ 2.865953] usb usb3: SerialNumber: 5101000.usb [ 2.866566] hub 3-0:1.0: USB hub found [ 2.866635] hub 3-0:1.0: 1 port detected [ 2.867969] ehci-platform 5311000.usb: EHCI Host Controller [ 2.868052] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 4 [ 2.868209] ehci-platform 5311000.usb: irq 44, io mem 0x05311000 [ 2.881527] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00 [ 2.881876] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.881891] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.881901] usb usb4: Product: EHCI Host Controller [ 2.881914] usb usb4: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd [ 2.881923] usb usb4: SerialNumber: 5311000.usb [ 2.882497] hub 4-0:1.0: USB hub found [ 2.882543] hub 4-0:1.0: 1 port detected [ 2.883659] ohci-platform 5101400.usb: Generic Platform OHCI controller [ 2.883696] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 5 [ 2.883846] ohci-platform 5101400.usb: irq 42, io mem 0x05101400 [ 2.901121] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.902890] mmc0: Problem switching card into high-speed mode! [ 2.903010] mmc0: new SDHC card at address 0001 [ 2.903892] mmcblk0: mmc0:0001 USD 29.8 GiB [ 2.905998] mmcblk0: p1 [ 2.945815] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 2.945843] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.945853] usb usb5: Product: Generic Platform OHCI controller [ 2.945862] usb usb5: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd [ 2.945870] usb usb5: SerialNumber: 5101400.usb [ 2.946508] hub 5-0:1.0: USB hub found [ 2.946564] hub 5-0:1.0: 1 port detected [ 2.947693] ohci-platform 5311400.usb: Generic Platform OHCI controller [ 2.947732] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 6 [ 2.947873] ohci-platform 5311400.usb: irq 45, io mem 0x05311400 [ 3.005682] mmc2: new HS200 MMC card at address 0001 [ 3.006689] mmcblk2: mmc2:0001 8GTF4R 7.28 GiB [ 3.009191] mmcblk2boot0: mmc2:0001 8GTF4R 4.00 MiB [ 3.009899] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 3.009929] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.009940] usb usb6: Product: Generic Platform OHCI controller [ 3.009949] usb usb6: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd [ 3.009957] usb usb6: SerialNumber: 5311400.usb [ 3.010742] hub 6-0:1.0: USB hub found [ 3.010820] hub 6-0:1.0: 1 port detected [ 3.011003] mmcblk2boot1: mmc2:0001 8GTF4R 4.00 MiB [ 3.012287] usb_phy_generic usb_phy_generic.4.auto: supply vcc not found, using dummy regulator [ 3.012471] usb_phy_generic usb_phy_generic.4.auto: dummy supplies not allowed for exclusive requests [ 3.078113] sunxi-mmc 4021000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 3.095714] mmc1: new high speed SDIO card at address 8800 [ 3.109911] musb-hdrc musb-hdrc.5.auto: MUSB HDRC host driver [ 3.109956] musb-hdrc musb-hdrc.5.auto: new USB bus registered, assigned bus number 7 [ 3.110288] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 3.110305] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.110316] usb usb7: Product: MUSB HDRC host driver [ 3.110324] usb usb7: Manufacturer: Linux 5.15.48-sunxi64 musb-hcd [ 3.110333] usb usb7: SerialNumber: musb-hdrc.5.auto [ 3.110923] hub 7-0:1.0: USB hub found [ 3.110989] hub 7-0:1.0: 1 port detected [ 3.127115] dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found [ 3.127143] dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found [ 3.127455] dwmac-sun8i 5020000.ethernet: supply phy-io not found, using dummy regulator [ 3.127695] dwmac-sun8i 5020000.ethernet: PTP uses main clock [ 3.127740] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 50000) [ 3.233767] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported [ 3.233793] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported [ 3.233800] dwmac-sun8i 5020000.ethernet: COE Type 2 [ 3.233809] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported [ 3.233817] dwmac-sun8i 5020000.ethernet: Normal descriptors [ 3.233824] dwmac-sun8i 5020000.ethernet: Chain mode enabled [ 3.470451] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null). Quota mode: none. [ 3.693548] usb 5-1: new full-speed USB device number 2 using ohci-platform [ 3.934574] usb 5-1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10 [ 3.934605] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.934616] usb 5-1: Product: USB Receiver [ 3.934624] usb 5-1: Manufacturer: Logitech [ 3.943645] input: Logitech USB Receiver as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.0/0003:046D:C52B.0004/input/input7 [ 4.002215] hid-generic 0003:046D:C52B.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-5101400.usb-1/input0 [ 4.008419] input: Logitech USB Receiver Mouse as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input8 [ 4.008877] input: Logitech USB Receiver Consumer Control as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input9 [ 4.065886] input: Logitech USB Receiver System Control as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input10 [ 4.066269] hid-generic 0003:046D:C52B.0005: input,hiddev97,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-5101400.usb-1/input1 [ 4.070836] hid-generic 0003:046D:C52B.0006: hiddev98,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-5101400.usb-1/input2 [ 4.842234] systemd[1]: System time before build time, advancing clock. [ 4.939393] systemd[1]: systemd 249.11-0ubuntu3.1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 4.940061] systemd[1]: Detected architecture arm64. [ 4.943463] systemd[1]: Hostname set to <orangepi3-lts>. [ 6.280645] systemd[1]: Queued start job for default target Graphical Interface. [ 6.286592] systemd[1]: Created slice Slice /system/modprobe. [ 6.289331] systemd[1]: Created slice Slice /system/serial-getty. [ 6.291295] systemd[1]: Created slice User and Session Slice. [ 6.292193] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.293712] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.294623] systemd[1]: Reached target Remote File Systems. [ 6.294972] systemd[1]: Reached target Slice Units. [ 6.295321] systemd[1]: Reached target Swaps. [ 6.295639] systemd[1]: Reached target System Time Set. [ 6.296162] systemd[1]: Reached target Local Verity Protected Volumes. [ 6.297245] systemd[1]: Listening on Syslog Socket. [ 6.298236] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.298936] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.300397] systemd[1]: Listening on Journal Audit Socket. [ 6.301308] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.302450] systemd[1]: Listening on Journal Socket. [ 6.314214] systemd[1]: Listening on udev Control Socket. [ 6.315305] systemd[1]: Listening on udev Kernel Socket. [ 6.319750] systemd[1]: Mounting Huge Pages File System... [ 6.324879] systemd[1]: Mounting POSIX Message Queue File System... [ 6.330662] systemd[1]: Mounting Kernel Debug File System... [ 6.331975] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 6.339409] systemd[1]: Starting Restore / save the current clock... [ 6.345147] systemd[1]: Starting Set the console keyboard layout... [ 6.351732] systemd[1]: Starting Create List of Static Device Nodes... [ 6.358465] systemd[1]: Starting Load Kernel Module configfs... [ 6.365077] systemd[1]: Starting Load Kernel Module drm... [ 6.371961] systemd[1]: Starting Load Kernel Module fuse... [ 6.379481] systemd[1]: Started Nameserver information manager. [ 6.380900] systemd[1]: Reached target Preparation for Network. [ 6.382190] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 6.395121] systemd[1]: Starting Load Kernel Modules... [ 6.401214] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.407382] systemd[1]: Starting Coldplug All udev Devices... [ 6.419152] systemd[1]: Mounted Huge Pages File System. [ 6.420837] systemd[1]: Mounted POSIX Message Queue File System. [ 6.422359] systemd[1]: Mounted Kernel Debug File System. [ 6.425432] systemd[1]: Finished Restore / save the current clock. [ 6.425773] fuse: init (API version 7.34) [ 6.428513] systemd[1]: Finished Create List of Static Device Nodes. [ 6.431938] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 6.433283] systemd[1]: Finished Load Kernel Module configfs. [ 6.435491] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 6.436886] systemd[1]: Finished Load Kernel Module drm. [ 6.439563] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 6.440948] systemd[1]: Finished Load Kernel Module fuse. [ 6.447052] systemd[1]: Mounting FUSE Control File System... [ 6.452353] systemd[1]: Mounting Kernel Configuration File System... [ 6.459715] systemd[1]: Mounted FUSE Control File System. [ 6.466857] systemd[1]: Mounted Kernel Configuration File System. [ 6.475597] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none. [ 6.481220] systemd[1]: Finished Remount Root and Kernel File Systems. [ 6.482545] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 6.487218] systemd[1]: Starting Load/Save Random Seed... [ 6.493049] systemd[1]: Starting Create System Users... [ 6.672733] WCN: marlin_init entry! [ 6.673295] WCN: wcn config bt wake host [ 6.673640] WCN_ERR: dts node for bt_wake not found [ 6.673650] WCN: marlin2 parse_dt some para not config [ 6.673674] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 [ 6.678896] sdiohal:sdiohal_init ok [ 6.679750] systemd[1]: Finished Load/Save Random Seed. [ 6.679837] WCN: marlin_probe ok! [ 6.680959] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 6.701362] systemd[1]: Finished Create System Users. [ 6.703749] mtty_probe init device addr: 0x00000000fe1f7fb4 [ 6.703958] -->rfkill_bluetooth_init [ 6.704103] bluetooth_set_power: start_block=1 [ 6.704117] WCN: marlin power state:0, subsys: [MARLIN_BLUETOOTH] power 0 [ 6.704127] bluetooth_set_power: end_block=1 [ 6.704144] <--rfkill_bluetooth_init [ 6.708485] systemd[1]: Starting Create Static Device Nodes in /dev... [ 6.792500] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.794213] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.815600] [ADDR_MGT] addr_mgt_probe: module version: v1.0.9 [ 6.815713] [ADDR_MGT] addr_mgt_probe: success. [ 6.820941] systemd[1]: Finished Set the console keyboard layout. [ 6.882354] WCN: start_marlin [MARLIN_WIFI] [ 6.882379] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 [ 6.882388] WCN: the first power on start [ 6.885320] systemd[1]: Finished Create Static Device Nodes in /dev. [ 6.892712] systemd[1]: Reached target Preparation for Local File Systems. [ 6.905003] systemd[1]: Mounting /tmp... [ 6.919680] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 6.930260] systemd[1]: Mounted /tmp. [ 6.937592] systemd[1]: Reached target Local File Systems. [ 6.949729] systemd[1]: Starting Armbian leds state... [ 6.962125] systemd[1]: Starting Armbian ZRAM config... [ 6.974560] systemd[1]: Starting Set console font and keymap... [ 6.986826] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... [ 6.989569] WCN: marlin chip en dummy pull up -- need manually set GPIO [ 7.012697] systemd[1]: Starting Set Up Additional Binary Formats... [ 7.017639] sdiohal:sdiohal_scan_card [ 7.017848] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=50000000 [ 7.017940] WCN: marlin_scan_finish! [ 7.017944] sdiohal:probe ok [ 7.018067] sdiohal:scan end! [ 7.018073] WCN: then marlin start to download [ 7.018305] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 [ 7.018318] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! [ 7.021202] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 7.021629] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 7.024765] systemd[1]: Finished Set console font and keymap. [ 7.035619] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 366 (systemd-binfmt) [ 7.043152] systemd[1]: Mounting Arbitrary Executable File Formats File System... [ 7.060577] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data. [ 7.072721] systemd[1]: Finished Coldplug All udev Devices. [ 7.167303] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ 7.177862] systemd[1]: Mounted Arbitrary Executable File Formats File System. [ 7.199741] systemd[1]: Finished Set Up Additional Binary Formats. [ 7.228170] systemd[1]: Finished Helper to synchronize boot up for ifupdown. [ 7.301685] systemd[1]: Finished Armbian leds state. [ 7.582111] systemd[1]: Started Rule-based Manager for Device Events and Files. [ 7.589917] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 7.590620] systemd[1]: Started Dispatch Password Requests to Console Directory Watch when bootsplash is active. [ 7.601725] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 7.601909] systemd[1]: Reached target Local Encrypted Volumes. [ 7.649290] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 7.693825] systemd[1]: Starting Load/Save RF Kill Switch Status... [ 7.870964] bluetooth_set_power: start_block=0 [ 7.870991] WCN: start_marlin [MARLIN_BLUETOOTH] [ 8.041648] systemd[1]: Found device /dev/ttyS0. [ 8.075381] WCN: combin_img 0 marlin_firmware_write finish and successful [ 8.075778] WCN: marlin_start_run read reset reg val:0x1 [ 8.075797] WCN: after do marlin_start_run reset reg val:0x0 [ 8.076026] WCN: s_marlin_bootup_time=8076026176 [ 8.081928] WCN: clock mode: TSX [ 8.082132] WCN: marlin_write_cali_data sync init_state:0x0 [ 8.109796] WCN: marlin_write_cali_data sync init_state:0x0 [ 8.137839] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1 [ 8.137866] WCN: sdio_config bt_wake_host trigger:[high] [ 8.137869] WCN: sdio_config irq:[inband] [ 8.137871] WCN: sdio_config wake_host_level_duration_time:[20ms] [ 8.137876] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse] [ 8.137878] WCN: marlin_send_sdio_config_to_cp sdio_config:0x80f01 (enable config) [ 8.138205] WCN: marlin_write_cali_data finish [ 8.138370] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.157809] panfrost 1800000.gpu: clock rate = 432000000 [ 8.157843] panfrost 1800000.gpu: bus_clock rate = 100000000 [ 8.158153] panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0 [ 8.158164] panfrost 1800000.gpu: features: 00000000,10309e40, issues: 00000000,21054400 [ 8.158170] panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7 [ 8.158178] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1 [ 8.159096] [drm] Initialized panfrost 1.2.0 20180908 for 1800000.gpu on minor 1 [ 8.165839] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.179510] mc: Linux media interface: v0.10 [ 8.193765] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.221809] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.249807] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0 [ 8.249830] WCN: marlin_bind_verify confuse data: 0x70f591d68e01b18d315da6e670879a4a [ 8.249845] WCN: marlin_bind_verify verify data: 0xa5709470f0031226394ebee725230b0c [ 8.250344] WCN: check_cp_ready sync val:0xf0f0f0f7, prj_type val:0x0 [ 8.277783] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0 [ 8.277802] sdiohal:sdiohal_runtime_get entry [ 8.277980] WCN: get_cp2_version entry! [ 8.299009] videodev: Linux video capture interface: v2.00 [ 8.317158] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~ [ 8.317230] WCN: switch_cp2_log - close entry! [ 8.318674] WCN: WCND at cmd read:OK [ 8.318761] WCN: then marlin download finished and run ok [ 8.318778] WCN: start_loopcheck [ 8.318884] WCN: marlin power state:4, subsys: [MARLIN_BLUETOOTH] power 1 [ 8.318895] WCN: marlin have open, GNSS is closed [ 8.318899] bluetooth_set_power: end_block=0 [ 8.320107] systemd[1]: Started Load/Save RF Kill Switch Status. [ 8.324478] zram: Added device: zram0 [ 8.325230] zram: Added device: zram1 [ 8.326075] zram: Added device: zram2 [ 8.354162] WCN: get_board_ant_num [one_ant] [ 8.354186] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini [ 8.365170] Registered IR keymap rc-empty [ 8.365298] rc rc0: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0 [ 8.366074] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter [ 8.366236] input: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0/input12 [ 8.378494] sunxi-ir 7040000.ir: initialized sunXi IR driver [ 8.434915] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings. [ 8.448849] systemd[1]: Finished Load Kernel Modules. [ 8.458292] systemd[1]: Starting Apply Kernel Variables... [ 8.514088] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned. [ 8.515483] cedrus 1c0e000.video-codec: Adding to iommu group 0 [ 8.518502] cedrus 1c0e000.video-codec: Device registered as /dev/video0 [ 8.567882] zram0: detected capacity change from 0 to 2037304 [ 8.631035] Adding 1018648k swap on /dev/zram0. Priority:5 extents:1 across:1018648k SSFS [ 8.653605] systemd[1]: Finished Apply Kernel Variables. [ 8.681160] systemd[1]: Starting Raise network interfaces... [ 8.791511] logitech-djreceiver 0003:046D:C52B.0006: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-5101400.usb-1/input2 [ 8.853254] zram1: detected capacity change from 0 to 102400 [ 8.977295] input: Logitech Wireless Device PID:4004 Keyboard as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.2/0003:046D:C52B.0006/0003:046D:4004.0007/input/input13 [ 9.045252] systemd[1]: Finished Armbian ZRAM config. [ 9.054870] hid-generic 0003:046D:4004.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4004] on usb-5101400.usb-1/input2:1 [ 9.055168] systemd[1]: Starting Armbian memory supported logging... [ 9.169531] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard. Quota mode: none. [ 9.215009] input: Logitech K360 as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.2/0003:046D:C52B.0006/0003:046D:4004.0007/input/input17 [ 9.215550] logitech-hidpp-device 0003:046D:4004.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K360] on usb-5101400.usb-1/input2:1 [ 9.699754] systemd[1]: Finished Raise network interfaces. [ 9.731709] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 9.732012] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 9.732412] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 9.738645] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 9.738778] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 9.738913] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 9.739051] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 9.894684] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 9.894922] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 9.894994] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 9.895091] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 9.895204] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 9.895323] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 11.563278] systemd[1]: Finished Armbian memory supported logging. [ 11.572525] systemd[1]: Starting Journal Service... [ 11.714105] systemd[1]: Started Journal Service. [ 11.743225] systemd-journald[691]: Received client request to flush runtime journal. ### armbian-release: # PLEASE DO NOT EDIT THIS FILE BOARD=orangepi3-lts BOARD_NAME="Orange Pi 3 LTS" BOARDFAMILY=sun50iw6 BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=13f5fba13c VERSION=22.05.3 LINUXFAMILY=sunxi64 ARCH=arm64 IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=stable BRANCH=current ### boot environment: verbosity=1 bootlogo=false console=both disp_mode=1920x1080p60 overlay_prefix=sun50i-h6 rootdev=UUID=71b44a6c-5bb8-4352-afe7-d22b8e62de4c rootfstype=ext4 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u ### lsusb: Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ### lscpu: Architecture: aarch64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Vendor ID: ARM Model name: Cortex-A53 Model: 4 Thread(s) per core: 1 Core(s) per cluster: 4 Socket(s): - Cluster(s): 1 Stepping: r0p4 CPU max MHz: 1800.0000 CPU min MHz: 480.0000 BogoMIPS: 48.00 Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid NUMA node(s): 1 NUMA node0 CPU(s): 0-3 Vulnerability Itlb multihit: Not affected Vulnerability L1tf: Not affected Vulnerability Mds: Not affected Vulnerability Meltdown: Not affected Vulnerability Mmio stale data: Not affected Vulnerability Spec store bypass: Not affected Vulnerability Spectre v1: Mitigation; __user pointer sanitization Vulnerability Spectre v2: Not affected Vulnerability Srbds: Not affected Vulnerability Tsx async abort: Not affected ### cpuinfo: processor : 0 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 1 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 2 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 3 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 ### meminfo: MemTotal: 2037300 kB MemFree: 1847312 kB MemAvailable: 1852580 kB Buffers: 12528 kB Cached: 52716 kB SwapCached: 0 kB Active: 32252 kB Inactive: 53072 kB Active(anon): 440 kB Inactive(anon): 22936 kB Active(file): 31812 kB Inactive(file): 30136 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 1018648 kB SwapFree: 1018648 kB Dirty: 2404 kB Writeback: 0 kB AnonPages: 20120 kB Mapped: 16908 kB Shmem: 3384 kB KReclaimable: 10544 kB Slab: 46252 kB SReclaimable: 10544 kB SUnreclaim: 35708 kB KernelStack: 2480 kB PageTables: 1508 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2037296 kB Committed_AS: 42864 kB VmallocTotal: 133143592960 kB VmallocUsed: 22732 kB VmallocChunk: 0 kB Percpu: 976 kB AnonHugePages: 0 kB ShmemHugePages: 0 kB ShmemPmdMapped: 0 kB FileHugePages: 0 kB FilePmdMapped: 0 kB CmaTotal: 131072 kB CmaFree: 128768 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB Hugetlb: 0 kB ### virtual memory: vm.admin_reserve_kbytes = 8192 vm.compaction_proactiveness = 20 vm.compact_unevictable_allowed = 1 vm.dirty_background_bytes = 0 vm.dirty_background_ratio = 10 vm.dirty_bytes = 0 vm.dirty_expire_centisecs = 3000 vm.dirty_ratio = 20 vm.dirtytime_expire_seconds = 43200 vm.dirty_writeback_centisecs = 500 vm.extfrag_threshold = 500 vm.hugetlb_shm_group = 0 vm.laptop_mode = 0 vm.legacy_va_layout = 0 vm.lowmem_reserve_ratio = 256 256 32 0 vm.max_map_count = 65530 vm.min_free_kbytes = 22528 vm.min_slab_ratio = 5 vm.min_unmapped_ratio = 1 vm.mmap_min_addr = 32768 vm.mmap_rnd_bits = 18 vm.mmap_rnd_compat_bits = 11 vm.nr_hugepages = 0 vm.nr_hugepages_mempolicy = 0 vm.nr_overcommit_hugepages = 0 vm.numa_stat = 1 vm.numa_zonelist_order = Node vm.oom_dump_tasks = 1 vm.oom_kill_allocating_task = 0 vm.overcommit_kbytes = 0 vm.overcommit_memory = 0 vm.overcommit_ratio = 50 vm.page-cluster = 0 vm.page_lock_unfairness = 5 vm.panic_on_oom = 0 vm.percpu_pagelist_high_fraction = 0 vm.stat_interval = 1 vm.swappiness = 100 vm.user_reserve_kbytes = 63007 vm.vfs_cache_pressure = 100 vm.watermark_boost_factor = 15000 vm.watermark_scale_factor = 10 vm.zone_reclaim_mode = 0 ### ip addr: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 02:07:29:30:86:8c brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:32:c3:9f:6a:08 brd ff:ff:ff:ff:ff:ff ### partitions: major minor #blocks name 179 0 31205376 mmcblk0 179 1 30879744 mmcblk0p1 179 32 7634944 mmcblk2 252 0 1018652 zram0 252 1 51200 zram1 ### df: tmpfs 199M 3.4M 196M 2% /run /dev/mmcblk0p1 29G 4.9G 24G 18% / tmpfs 995M 0 995M 0% /dev/shm tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 995M 0 995M 0% /tmp /dev/zram1 47M 2.4M 42M 6% /var/log ### lsblk: NAME FSTYPE SIZE MOUNTPOINT UUID mmcblk0 29.8G └─mmcblk0p1 ext4 29.4G / 71b44a6c-5bb8-4352-afe7-d22b8e62de4c mmcblk2 swap 7.3G 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 mmcblk2boot0 swap 4M 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 mmcblk2boot1 swap 4M 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 zram1 50M /var/log zram2 0B ### zramctl: NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT /dev/zram1 zstd 50M 68K 721B 44K 4 /var/log /dev/zram0 lzo-rle 994.8M 4K 74B 12K 4 [SWAP] ### mtab: /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 ### mmc0:0001 info: fwrev: 0x0 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=USD MODALIAS=mmc:block cid: 1d414455534400001000005ae0016181 rca: 0x0001 csd: 400e00325b590000ee137f800a40004d manfid: 0x00001d ocr: 0x00200000 preferred_erase_size: 4194304 type: SD hwrev: 0x1 date: 01/2022 dsr: 0x404 erase_size: 512 oemid: 0x4144 serial: 0x00005ae0 ssr: 000000000500000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 scr: 02b5808200000000 name: USD ### mmc2:0001 info: fwrev: 0x0600000000000000 uevent: DRIVER=mmcblk MMC_TYPE=MMC MMC_NAME=8GTF4R MODALIAS=mmc:block cid: 15010038475446345206d410e21fc801 rel_sectors: 0x1 enhanced_rpmb_supported: 0x1 rca: 0x0001 pre_eol_info: 0x01 csd: d02701320f5903fff6dbffef8e40400d manfid: 0x000015 ocr: 0x00200000 preferred_erase_size: 4194304 enhanced_area_offset: 18446744073709551594 raw_rpmb_size_mult: 0x4 type: MMC hwrev: 0x0 date: 12/2021 prv: 0x6 ffu_capable: 1 dsr: 0x404 erase_size: 524288 life_time: 0x01 0x01 enhanced_area_size: 4294967274 oemid: 0x0100 serial: 0xd410e21f cmdq_en: 0 rev: 0x8 name: 8GTF4R ### Boot system health: Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 11:40:44: 1320MHz 0.23 46% 19% 13% 0% 12% 0% 63.6°C 0/9 11:40:44: 888MHz 0.23 12% 8% 2% 1% 0% 0% 63.6°C 0/9 11:40:44: 1080MHz 0.23 12% 9% 2% 0% 0% 0% 58.2°C 0/9 11:40:45: 1800MHz 0.23 12% 6% 4% 1% 0% 0% 58.3°C 0/9 11:40:45: 1800MHz 0.23 14% 9% 2% 1% 0% 0% 59.3°C 0/9 ### Activated 1 lzo-rle zram swap devices with 994MB each. ### Activated Armbian ramlog partition with zstd compression Thu Jun 23 11:48:16 AM CST 2022 | Orange Pi 3 LTS | 22.05.3 | arm64 | aarch64 | 5.15.48-sunxi64 ### dmesg: [ 1.272120] ohci-platform: OHCI generic platform driver [ 1.272614] usbcore: registered new interface driver usb-storage [ 1.273128] mousedev: PS/2 mouse device common for all mice [ 1.274160] sun6i-rtc 7000000.rtc: registered as rtc0 [ 1.274198] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-01T00:07:55 UTC (475) [ 1.274306] sun6i-rtc 7000000.rtc: RTC enabled [ 1.274449] i2c_dev: i2c /dev entries driver [ 1.275241] sunxi-wdt 7020400.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.276799] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pm not found, using dummy regulator [ 1.277224] sdhci: Secure Digital Host Controller Interface driver [ 1.277234] sdhci: Copyright(c) Pierre Ossman [ 1.277258] Synopsys Designware Multimedia Card Interface Driver [ 1.278091] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.278268] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pl not found, using dummy regulator [ 1.279331] ledtrig-cpu: registered to indicate activity on CPUs [ 1.279930] sun8i-ce 1904000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.280188] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.280330] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.280432] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.280526] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.280606] sun8i-ce 1904000.crypto: Register cbc(aes) [ 1.280754] sun8i-ce 1904000.crypto: Register ecb(aes) [ 1.280864] sun8i-ce 1904000.crypto: Register cbc(des3_ede) [ 1.280972] sun8i-ce 1904000.crypto: Register ecb(des3_ede) [ 1.281079] sun8i-ce 1904000.crypto: Register md5 [ 1.281186] sun8i-ce 1904000.crypto: Register sha1 [ 1.281293] sun8i-ce 1904000.crypto: Register sha224 [ 1.281401] sun8i-ce 1904000.crypto: Register sha256 [ 1.281507] sun8i-ce 1904000.crypto: Register sha384 [ 1.281665] sun8i-ce 1904000.crypto: Register sha512 [ 1.281777] sun8i-ce 1904000.crypto: Register stdrng [ 1.282517] sun8i-ce 1904000.crypto: CryptoEngine Die ID 0 [ 1.283115] hid: raw HID events driver (C) Jiri Kosina [ 1.283240] usbcore: registered new interface driver usbhid [ 1.283247] usbhid: USB HID core driver [ 1.284060] random: crng init done [ 1.286213] NET: Registered PF_INET6 protocol family [ 1.870216] Freeing initrd memory: 12684K [ 1.898965] Segment Routing with IPv6 [ 1.899073] In-situ OAM (IOAM) with IPv6 [ 1.899164] NET: Registered PF_PACKET protocol family [ 1.899302] 8021q: 802.1Q VLAN Support v1.8 [ 1.899459] 9pnet: Installing 9P2000 support [ 1.899532] Key type dns_resolver registered [ 1.899974] registered taskstats version 1 [ 1.899990] Loading compiled-in X.509 certificates [ 1.903826] Loaded X.509 cert 'Build time autogenerated kernel key: 32330adefd2da02e444296fafd37464380789679' [ 1.906701] zswap: loaded using pool zstd/z3fold [ 1.907326] Key type ._fscrypt registered [ 1.907334] Key type .fscrypt registered [ 1.907338] Key type fscrypt-provisioning registered [ 1.908346] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no [ 1.922075] Key type encrypted registered [ 1.922109] AppArmor: AppArmor sha1 policy hashing enabled [ 1.922149] ima: No TPM chip found, activating TPM-bypass! [ 1.922177] ima: Allocated hash algorithm: sha1 [ 1.922209] ima: No architecture policies found [ 1.922282] evm: Initialising EVM extended attributes: [ 1.922286] evm: security.selinux [ 1.922291] evm: security.SMACK64 [ 1.922296] evm: security.SMACK64EXEC [ 1.922300] evm: security.SMACK64TRANSMUTE [ 1.922304] evm: security.SMACK64MMAP [ 1.922308] evm: security.apparmor [ 1.922312] evm: security.ima [ 1.922316] evm: security.capability [ 1.922320] evm: HMAC attrs: 0x1 [ 1.935478] platform 1100000.mixer: Fixing up cyclic dependency with 6510000.tcon-top [ 1.935838] sun8i-mixer 1100000.mixer: Adding to iommu group 0 [ 1.937884] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.937915] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 1.938068] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f064 hci version 0x100 quirks 0x0000000002010010 [ 1.938129] xhci-hcd xhci-hcd.1.auto: irq 43, io mem 0x05200000 [ 1.938581] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.938597] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.938607] usb usb1: Product: xHCI Host Controller [ 1.938615] usb usb1: Manufacturer: Linux 5.15.48-sunxi64 xhci-hcd [ 1.938624] usb usb1: SerialNumber: xhci-hcd.1.auto [ 1.939157] hub 1-0:1.0: USB hub found [ 1.939202] hub 1-0:1.0: 1 port detected [ 1.939537] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.939557] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 1.939576] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 1.939668] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.939826] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 1.939839] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.939849] usb usb2: Product: xHCI Host Controller [ 1.939857] usb usb2: Manufacturer: Linux 5.15.48-sunxi64 xhci-hcd [ 1.939866] usb usb2: SerialNumber: xhci-hcd.1.auto [ 1.940303] hub 2-0:1.0: USB hub found [ 1.940340] hub 2-0:1.0: 1 port detected [ 1.942990] sun50i_cpufreq_nvmem: Using CPU speed bin speed0 [ 1.944802] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version [ 1.951206] of_cfs_init [ 1.951337] of_cfs_init: OK [ 1.951677] ALSA device list: [ 1.951684] No soundcards found. [ 1.952785] Freeing unused kernel memory: 2496K [ 1.973623] Run /init as init process [ 1.973631] with arguments: [ 1.973637] /init [ 1.973643] with environment: [ 1.973647] HOME=/ [ 1.973652] TERM=linux [ 1.973657] ubootpart=ce3dfe46-01 [ 1.973662] cgroup_enable=memory [ 2.193601] usb 1-1: new full-speed USB device number 2 using xhci-hcd [ 2.346592] usb 1-1: New USB device found, idVendor=045e, idProduct=0745, bcdDevice= 6.33 [ 2.346627] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.346638] usb 1-1: Product: Microsoft® 2.4GHz Transceiver v7.0 [ 2.346646] usb 1-1: Manufacturer: Microsoft [ 2.367970] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:045E:0745.0001/input/input0 [ 2.416093] axp20x-i2c 0-0036: AXP20x variant AXP806 found [ 2.429907] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input0 [ 2.437381] input: axp20x-pek as /devices/platform/soc/7081400.i2c/i2c-0/0-0036/axp221-pek/input/input1 [ 2.446665] vdd-cpu: supplied by vcc-5v [ 2.449719] vdd-gpu: supplied by vcc-5v [ 2.450579] vdd-sys: supplied by vcc-5v [ 2.451449] vcc-dram: supplied by vcc-5v [ 2.453703] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Mouse as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.1/0003:045E:0745.0002/input/input2 [ 2.454269] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Consumer Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.1/0003:045E:0745.0002/input/input3 [ 2.456626] vcc-pl-led-ir: supplied by vcc-5v [ 2.457495] vcc33-audio-tv-ephy-mac: supplied by vcc-5v [ 2.513978] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input1 [ 2.527597] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Consumer Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.2/0003:045E:0745.0003/input/input4 [ 2.566336] vcc33-io-pd-emmc-sd-usb-uart-1: supplied by vcc-5v [ 2.567031] vcc18-dram-bias-pll: supplied by vcc-5v [ 2.568106] vcc-efuse-pcie-hdmi-pc: supplied by vcc-5v [ 2.568777] vcc-wifi-io-pm-pg: supplied by vcc-5v [ 2.569573] bldo4: supplied by vcc-5v [ 2.570101] vcc33-io-pd-emmc-sd-usb-uart-2: supplied by vcc-5v [ 2.570919] cldo2: supplied by vcc-5v [ 2.571561] cldo3: supplied by vcc-5v [ 2.571822] sw: supplied by regulator-dummy [ 2.572376] axp20x-i2c 0-0036: AXP20X driver loaded [ 2.578873] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver [ 2.579353] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pb not found, using dummy regulator [ 2.580357] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator [ 2.581186] printk: console [ttyS0] disabled [ 2.581302] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 35, base_baud = 1500000) is a 16550A [ 2.581573] printk: console [ttyS0] enabled [ 2.582872] sun4i-drm display-engine: Adding to iommu group 0 [ 2.587091] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 System Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.2/0003:045E:0745.0003/input/input6 [ 2.588237] hid-generic 0003:045E:0745.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input2 [ 2.602484] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800008e16990) [ 2.602783] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800008e1abb8) [ 2.603132] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800008e11ba0) [ 2.603237] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator [ 2.607552] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY) [ 2.610193] sun8i-dw-hdmi 6000000.hdmi: EVENT=plugin [ 2.611789] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.612790] sun4i-drm display-engine: bound 6000000.hdmi (ops 0xffff800008e15cc8) [ 2.614453] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 [ 2.614521] sun8i-dw-hdmi 6000000.hdmi: read_hpd result: 1 [ 2.770264] Console: switching to colour frame buffer device 240x67 [ 2.820085] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device [ 2.841915] acx00-codec acx00-codec: DMA mask not set [ 2.844695] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator [ 2.846014] sunxi-mmc 4020000.mmc: Got CD GPIO [ 2.846566] vcc-wifi-io: supplied by vcc33-wifi [ 2.848944] ehci-platform 5101000.usb: EHCI Host Controller [ 2.849108] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 3 [ 2.849277] ehci-platform 5101000.usb: irq 41, io mem 0x05101000 [ 2.861619] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00 [ 2.861961] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.861976] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.861987] usb usb3: Product: EHCI Host Controller [ 2.861995] usb usb3: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd [ 2.862004] usb usb3: SerialNumber: 5101000.usb [ 2.862573] hub 3-0:1.0: USB hub found [ 2.862616] hub 3-0:1.0: 1 port detected [ 2.863716] ehci-platform 5311000.usb: EHCI Host Controller [ 2.863754] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 4 [ 2.863897] ehci-platform 5311000.usb: irq 44, io mem 0x05311000 [ 2.869591] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 2.869910] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 2.877571] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00 [ 2.877916] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.877932] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.877943] usb usb4: Product: EHCI Host Controller [ 2.877951] usb usb4: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd [ 2.877960] usb usb4: SerialNumber: 5311000.usb [ 2.878516] hub 4-0:1.0: USB hub found [ 2.878560] hub 4-0:1.0: 1 port detected [ 2.879652] ohci-platform 5101400.usb: Generic Platform OHCI controller [ 2.879690] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 5 [ 2.879830] ohci-platform 5101400.usb: irq 42, io mem 0x05101400 [ 2.904492] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.906262] mmc0: Problem switching card into high-speed mode! [ 2.906374] mmc0: new SDHC card at address 0001 [ 2.907229] mmcblk0: mmc0:0001 USD 29.8 GiB [ 2.909255] mmcblk0: p1 [ 2.941827] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 2.941852] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.941862] usb usb5: Product: Generic Platform OHCI controller [ 2.941871] usb usb5: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd [ 2.941879] usb usb5: SerialNumber: 5101400.usb [ 2.942627] hub 5-0:1.0: USB hub found [ 2.942693] hub 5-0:1.0: 1 port detected [ 2.943898] ohci-platform 5311400.usb: Generic Platform OHCI controller [ 2.943950] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 6 [ 2.944086] ohci-platform 5311400.usb: irq 45, io mem 0x05311400 [ 2.997703] mmc2: new HS200 MMC card at address 0001 [ 2.998755] mmcblk2: mmc2:0001 8GTF4R 7.28 GiB [ 3.001037] mmcblk2boot0: mmc2:0001 8GTF4R 4.00 MiB [ 3.002672] mmcblk2boot1: mmc2:0001 8GTF4R 4.00 MiB [ 3.005930] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 3.005972] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.005984] usb usb6: Product: Generic Platform OHCI controller [ 3.005992] usb usb6: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd [ 3.006001] usb usb6: SerialNumber: 5311400.usb [ 3.006674] hub 6-0:1.0: USB hub found [ 3.006731] hub 6-0:1.0: 1 port detected [ 3.008066] usb_phy_generic usb_phy_generic.4.auto: supply vcc not found, using dummy regulator [ 3.008361] usb_phy_generic usb_phy_generic.4.auto: dummy supplies not allowed for exclusive requests [ 3.113914] musb-hdrc musb-hdrc.5.auto: MUSB HDRC host driver [ 3.113960] musb-hdrc musb-hdrc.5.auto: new USB bus registered, assigned bus number 7 [ 3.114250] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 3.114265] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.114276] usb usb7: Product: MUSB HDRC host driver [ 3.114284] usb usb7: Manufacturer: Linux 5.15.48-sunxi64 musb-hcd [ 3.114293] usb usb7: SerialNumber: musb-hdrc.5.auto [ 3.114896] hub 7-0:1.0: USB hub found [ 3.114955] hub 7-0:1.0: 1 port detected [ 3.135122] dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found [ 3.135149] dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found [ 3.135453] dwmac-sun8i 5020000.ethernet: supply phy-io not found, using dummy regulator [ 3.135754] dwmac-sun8i 5020000.ethernet: PTP uses main clock [ 3.135801] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 50000) [ 3.241842] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported [ 3.241868] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported [ 3.241876] dwmac-sun8i 5020000.ethernet: COE Type 2 [ 3.241886] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported [ 3.241894] dwmac-sun8i 5020000.ethernet: Normal descriptors [ 3.241901] dwmac-sun8i 5020000.ethernet: Chain mode enabled [ 3.460812] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null). Quota mode: none. [ 3.685578] usb 5-1: new full-speed USB device number 2 using ohci-platform [ 3.922615] usb 5-1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10 [ 3.922646] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.922656] usb 5-1: Product: USB Receiver [ 3.922665] usb 5-1: Manufacturer: Logitech [ 3.931703] input: Logitech USB Receiver as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.0/0003:046D:C52B.0004/input/input7 [ 3.990240] hid-generic 0003:046D:C52B.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-5101400.usb-1/input0 [ 3.996409] input: Logitech USB Receiver Mouse as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input8 [ 3.996878] input: Logitech USB Receiver Consumer Control as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input9 [ 4.053923] input: Logitech USB Receiver System Control as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input10 [ 4.054273] hid-generic 0003:046D:C52B.0005: input,hiddev97,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-5101400.usb-1/input1 [ 4.058954] hid-generic 0003:046D:C52B.0006: hiddev98,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-5101400.usb-1/input2 [ 4.755008] systemd[1]: System time before build time, advancing clock. [ 4.843289] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq [ 4.852360] systemd[1]: systemd 249.11-0ubuntu3.1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 4.853031] systemd[1]: Detected architecture arm64. [ 4.856401] systemd[1]: Hostname set to <orangepi3-lts>. [ 5.073589] sunxi-mmc 4021000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 5.093717] mmc1: new high speed SDIO card at address 8800 [ 6.193792] systemd[1]: Queued start job for default target Graphical Interface. [ 6.199673] systemd[1]: Created slice Slice /system/modprobe. [ 6.202438] systemd[1]: Created slice Slice /system/serial-getty. [ 6.204317] systemd[1]: Created slice User and Session Slice. [ 6.205203] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.206686] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.207616] systemd[1]: Reached target Remote File Systems. [ 6.207972] systemd[1]: Reached target Slice Units. [ 6.208316] systemd[1]: Reached target Swaps. [ 6.208615] systemd[1]: Reached target System Time Set. [ 6.209148] systemd[1]: Reached target Local Verity Protected Volumes. [ 6.210233] systemd[1]: Listening on Syslog Socket. [ 6.211099] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.211773] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.213196] systemd[1]: Listening on Journal Audit Socket. [ 6.214166] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.215189] systemd[1]: Listening on Journal Socket. [ 6.226972] systemd[1]: Listening on udev Control Socket. [ 6.228070] systemd[1]: Listening on udev Kernel Socket. [ 6.232463] systemd[1]: Mounting Huge Pages File System... [ 6.237480] systemd[1]: Mounting POSIX Message Queue File System... [ 6.243196] systemd[1]: Mounting Kernel Debug File System... [ 6.244530] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 6.251806] systemd[1]: Starting Restore / save the current clock... [ 6.257507] systemd[1]: Starting Set the console keyboard layout... [ 6.264010] systemd[1]: Starting Create List of Static Device Nodes... [ 6.270697] systemd[1]: Starting Load Kernel Module configfs... [ 6.277248] systemd[1]: Starting Load Kernel Module drm... [ 6.284225] systemd[1]: Starting Load Kernel Module fuse... [ 6.290950] systemd[1]: Started Nameserver information manager. [ 6.293372] systemd[1]: Reached target Preparation for Network. [ 6.294676] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 6.305486] systemd[1]: Starting Load Kernel Modules... [ 6.311575] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.318055] systemd[1]: Starting Coldplug All udev Devices... [ 6.329070] systemd[1]: Mounted Huge Pages File System. [ 6.330531] systemd[1]: Mounted POSIX Message Queue File System. [ 6.331866] systemd[1]: Mounted Kernel Debug File System. [ 6.334637] systemd[1]: Finished Restore / save the current clock. [ 6.337208] fuse: init (API version 7.34) [ 6.338287] systemd[1]: Finished Create List of Static Device Nodes. [ 6.340802] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 6.342196] systemd[1]: Finished Load Kernel Module configfs. [ 6.344794] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 6.346196] systemd[1]: Finished Load Kernel Module drm. [ 6.348702] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 6.350366] systemd[1]: Finished Load Kernel Module fuse. [ 6.358420] systemd[1]: Mounting FUSE Control File System... [ 6.363565] systemd[1]: Mounting Kernel Configuration File System... [ 6.370549] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none. [ 6.378619] systemd[1]: Finished Remount Root and Kernel File Systems. [ 6.380232] systemd[1]: Mounted FUSE Control File System. [ 6.381348] systemd[1]: Mounted Kernel Configuration File System. [ 6.382326] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 6.387071] systemd[1]: Starting Load/Save Random Seed... [ 6.392540] systemd[1]: Starting Create System Users... [ 6.586419] WCN: marlin_init entry! [ 6.586991] WCN: wcn config bt wake host [ 6.587221] WCN_ERR: dts node for bt_wake not found [ 6.587225] WCN: marlin2 parse_dt some para not config [ 6.587238] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 [ 6.592123] sdiohal:sdiohal_init ok [ 6.592878] WCN: marlin_probe ok! [ 6.620583] mtty_probe init device addr: 0x00000000e28a0d2b [ 6.620797] -->rfkill_bluetooth_init [ 6.620939] bluetooth_set_power: start_block=1 [ 6.620953] WCN: marlin power state:0, subsys: [MARLIN_BLUETOOTH] power 0 [ 6.620964] bluetooth_set_power: end_block=1 [ 6.620984] <--rfkill_bluetooth_init [ 6.623689] systemd[1]: Finished Load/Save Random Seed. [ 6.626442] systemd[1]: Finished Create System Users. [ 6.627758] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 6.634972] systemd[1]: Starting Create Static Device Nodes in /dev... [ 6.763812] systemd[1]: Finished Set the console keyboard layout. [ 6.786911] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.788524] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.809385] [ADDR_MGT] addr_mgt_probe: module version: v1.0.9 [ 6.809498] [ADDR_MGT] addr_mgt_probe: success. [ 6.875323] WCN: start_marlin [MARLIN_WIFI] [ 6.875350] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 [ 6.875357] WCN: the first power on start [ 6.882798] systemd[1]: Finished Create Static Device Nodes in /dev. [ 6.890198] systemd[1]: Reached target Preparation for Local File Systems. [ 6.902433] systemd[1]: Mounting /tmp... [ 6.917110] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 6.928017] systemd[1]: Mounted /tmp. [ 6.935371] systemd[1]: Reached target Local File Systems. [ 6.947700] systemd[1]: Starting Armbian leds state... [ 6.960150] systemd[1]: Starting Armbian ZRAM config... [ 6.973058] systemd[1]: Starting Set console font and keymap... [ 6.981654] WCN: marlin chip en dummy pull up -- need manually set GPIO [ 6.985303] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... [ 7.009278] systemd[1]: Starting Set Up Additional Binary Formats... [ 7.009633] sdiohal:sdiohal_scan_card [ 7.009865] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=50000000 [ 7.009980] WCN: marlin_scan_finish! [ 7.009984] sdiohal:probe ok [ 7.010121] sdiohal:scan end! [ 7.010127] WCN: then marlin start to download [ 7.010352] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 [ 7.010365] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! [ 7.016147] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 7.016455] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 7.019509] systemd[1]: Finished Coldplug All udev Devices. [ 7.028350] systemd[1]: Finished Set console font and keymap. [ 7.059177] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ 7.068115] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data. [ 7.075631] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 363 (systemd-binfmt) [ 7.080419] systemd[1]: Mounting Arbitrary Executable File Formats File System... [ 7.176429] systemd[1]: Mounted Arbitrary Executable File Formats File System. [ 7.195698] systemd[1]: Finished Set Up Additional Binary Formats. [ 7.204781] systemd[1]: Finished Helper to synchronize boot up for ifupdown. [ 7.302466] systemd[1]: Finished Armbian leds state. [ 7.578280] systemd[1]: Started Rule-based Manager for Device Events and Files. [ 7.586089] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 7.586742] systemd[1]: Started Dispatch Password Requests to Console Directory Watch when bootsplash is active. [ 7.594078] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 7.594232] systemd[1]: Reached target Local Encrypted Volumes. [ 7.650629] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 7.690721] systemd[1]: Starting Load/Save RF Kill Switch Status... [ 7.861430] bluetooth_set_power: start_block=0 [ 7.861457] WCN: start_marlin [MARLIN_BLUETOOTH] [ 8.022021] WCN: combin_img 0 marlin_firmware_write finish and successful [ 8.022313] WCN: marlin_start_run read reset reg val:0x1 [ 8.022320] WCN: after do marlin_start_run reset reg val:0x0 [ 8.022497] WCN: s_marlin_bootup_time=8022497218 [ 8.027371] mc: Linux media interface: v0.10 [ 8.029116] WCN: clock mode: TSX [ 8.029325] WCN: marlin_write_cali_data sync init_state:0x0 [ 8.042428] panfrost 1800000.gpu: clock rate = 432000000 [ 8.042461] panfrost 1800000.gpu: bus_clock rate = 100000000 [ 8.048008] panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0 [ 8.048034] panfrost 1800000.gpu: features: 00000000,10309e40, issues: 00000000,21054400 [ 8.048042] panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7 [ 8.048050] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1 [ 8.053842] WCN: marlin_write_cali_data sync init_state:0x0 [ 8.078362] videodev: Linux video capture interface: v2.00 [ 8.079820] systemd[1]: Found device /dev/ttyS0. [ 8.081868] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1 [ 8.081894] WCN: sdio_config bt_wake_host trigger:[high] [ 8.081897] WCN: sdio_config irq:[inband] [ 8.081899] WCN: sdio_config wake_host_level_duration_time:[20ms] [ 8.081903] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse] [ 8.081906] WCN: marlin_send_sdio_config_to_cp sdio_config:0x80f01 (enable config) [ 8.082330] WCN: marlin_write_cali_data finish [ 8.082591] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.083099] [drm] Initialized panfrost 1.2.0 20180908 for 1800000.gpu on minor 1 [ 8.109908] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.130243] zram: Added device: zram0 [ 8.137813] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.165793] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.181921] zram: Added device: zram1 [ 8.193819] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0 [ 8.193843] WCN: marlin_bind_verify confuse data: 0x2e197f4f5a1107df30c640a9405a3d69 [ 8.193860] WCN: marlin_bind_verify verify data: 0x016d6ab91e1d071b3ae4604f224021aa [ 8.194409] WCN: check_cp_ready sync val:0xf0f0f0f7, prj_type val:0x0 [ 8.198061] zram: Added device: zram2 [ 8.227589] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0 [ 8.227616] sdiohal:sdiohal_runtime_get entry [ 8.233394] WCN: get_cp2_version entry! [ 8.280833] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~ [ 8.280868] WCN: switch_cp2_log - close entry! [ 8.282187] WCN: WCND at cmd read:OK [ 8.282244] WCN: then marlin download finished and run ok [ 8.282258] WCN: start_loopcheck [ 8.282550] WCN: marlin power state:4, subsys: [MARLIN_BLUETOOTH] power 1 [ 8.282561] WCN: marlin have open, GNSS is closed [ 8.282565] bluetooth_set_power: end_block=0 [ 8.288920] systemd[1]: Started Load/Save RF Kill Switch Status. [ 8.306629] WCN: get_board_ant_num [one_ant] [ 8.306654] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini [ 8.380720] Registered IR keymap rc-empty [ 8.380846] rc rc0: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0 [ 8.381036] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter [ 8.381128] input: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0/input12 [ 8.381466] sunxi-ir 7040000.ir: initialized sunXi IR driver [ 8.387814] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings. [ 8.392387] systemd[1]: Finished Load Kernel Modules. [ 8.402147] systemd[1]: Starting Apply Kernel Variables... [ 8.499610] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned. [ 8.500798] cedrus 1c0e000.video-codec: Adding to iommu group 0 [ 8.501857] cedrus 1c0e000.video-codec: Device registered as /dev/video0 [ 8.621340] zram0: detected capacity change from 0 to 2037304 [ 8.651781] Adding 1018648k swap on /dev/zram0. Priority:5 extents:1 across:1018648k SSFS [ 8.687059] systemd[1]: Finished Apply Kernel Variables. [ 8.716975] systemd[1]: Starting Raise network interfaces... [ 8.871439] zram1: detected capacity change from 0 to 102400 [ 8.949631] logitech-djreceiver 0003:046D:C52B.0006: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-5101400.usb-1/input2 [ 9.026075] systemd[1]: Finished Armbian ZRAM config. [ 9.036822] systemd[1]: Starting Armbian memory supported logging... [ 9.110343] input: Logitech Wireless Device PID:4004 Keyboard as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.2/0003:046D:C52B.0006/0003:046D:4004.0007/input/input13 [ 9.157338] hid-generic 0003:046D:4004.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4004] on usb-5101400.usb-1/input2:1 [ 9.171004] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard. Quota mode: none. [ 9.327377] input: Logitech K360 as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.2/0003:046D:C52B.0006/0003:046D:4004.0007/input/input17 [ 9.328295] logitech-hidpp-device 0003:046D:4004.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K360] on usb-5101400.usb-1/input2:1 [ 9.690644] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 9.691310] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 9.692362] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 9.697275] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 9.697501] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 9.697835] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 9.697994] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 9.755895] systemd[1]: Finished Raise network interfaces. [ 9.998313] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 9.998546] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 9.998617] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 9.998708] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 9.998815] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 9.998931] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 11.573639] systemd[1]: Finished Armbian memory supported logging. [ 11.584810] systemd[1]: Starting Journal Service... [ 11.722369] systemd[1]: Started Journal Service. [ 11.750846] systemd-journald[690]: Received client request to flush runtime journal. ### armbian-release: # PLEASE DO NOT EDIT THIS FILE BOARD=orangepi3-lts BOARD_NAME="Orange Pi 3 LTS" BOARDFAMILY=sun50iw6 BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=13f5fba13c VERSION=22.05.3 LINUXFAMILY=sunxi64 ARCH=arm64 IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=stable BRANCH=current ### boot environment: verbosity=1 bootlogo=false console=both disp_mode=1920x1080p60 overlay_prefix=sun50i-h6 rootdev=UUID=71b44a6c-5bb8-4352-afe7-d22b8e62de4c rootfstype=ext4 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u ### lsusb: Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ### lscpu: Architecture: aarch64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Vendor ID: ARM Model name: Cortex-A53 Model: 4 Thread(s) per core: 1 Core(s) per cluster: 4 Socket(s): - Cluster(s): 1 Stepping: r0p4 CPU max MHz: 1800.0000 CPU min MHz: 480.0000 BogoMIPS: 48.00 Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid NUMA node(s): 1 NUMA node0 CPU(s): 0-3 Vulnerability Itlb multihit: Not affected Vulnerability L1tf: Not affected Vulnerability Mds: Not affected Vulnerability Meltdown: Not affected Vulnerability Mmio stale data: Not affected Vulnerability Spec store bypass: Not affected Vulnerability Spectre v1: Mitigation; __user pointer sanitization Vulnerability Spectre v2: Not affected Vulnerability Srbds: Not affected Vulnerability Tsx async abort: Not affected ### cpuinfo: processor : 0 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 1 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 2 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 3 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 ### meminfo: MemTotal: 2037300 kB MemFree: 1845772 kB MemAvailable: 1851244 kB Buffers: 12532 kB Cached: 52908 kB SwapCached: 0 kB Active: 32344 kB Inactive: 52708 kB Active(anon): 428 kB Inactive(anon): 22452 kB Active(file): 31916 kB Inactive(file): 30256 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 1018648 kB SwapFree: 1018648 kB Dirty: 2836 kB Writeback: 0 kB AnonPages: 19400 kB Mapped: 16772 kB Shmem: 3376 kB KReclaimable: 10500 kB Slab: 45964 kB SReclaimable: 10500 kB SUnreclaim: 35464 kB KernelStack: 2448 kB PageTables: 1528 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2037296 kB Committed_AS: 42340 kB VmallocTotal: 133143592960 kB VmallocUsed: 22684 kB VmallocChunk: 0 kB Percpu: 976 kB AnonHugePages: 0 kB ShmemHugePages: 0 kB ShmemPmdMapped: 0 kB FileHugePages: 0 kB FilePmdMapped: 0 kB CmaTotal: 131072 kB CmaFree: 128768 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB Hugetlb: 0 kB ### virtual memory: vm.admin_reserve_kbytes = 8192 vm.compaction_proactiveness = 20 vm.compact_unevictable_allowed = 1 vm.dirty_background_bytes = 0 vm.dirty_background_ratio = 10 vm.dirty_bytes = 0 vm.dirty_expire_centisecs = 3000 vm.dirty_ratio = 20 vm.dirtytime_expire_seconds = 43200 vm.dirty_writeback_centisecs = 500 vm.extfrag_threshold = 500 vm.hugetlb_shm_group = 0 vm.laptop_mode = 0 vm.legacy_va_layout = 0 vm.lowmem_reserve_ratio = 256 256 32 0 vm.max_map_count = 65530 vm.min_free_kbytes = 22528 vm.min_slab_ratio = 5 vm.min_unmapped_ratio = 1 vm.mmap_min_addr = 32768 vm.mmap_rnd_bits = 18 vm.mmap_rnd_compat_bits = 11 vm.nr_hugepages = 0 vm.nr_hugepages_mempolicy = 0 vm.nr_overcommit_hugepages = 0 vm.numa_stat = 1 vm.numa_zonelist_order = Node vm.oom_dump_tasks = 1 vm.oom_kill_allocating_task = 0 vm.overcommit_kbytes = 0 vm.overcommit_memory = 0 vm.overcommit_ratio = 50 vm.page-cluster = 0 vm.page_lock_unfairness = 5 vm.panic_on_oom = 0 vm.percpu_pagelist_high_fraction = 0 vm.stat_interval = 1 vm.swappiness = 100 vm.user_reserve_kbytes = 63011 vm.vfs_cache_pressure = 100 vm.watermark_boost_factor = 15000 vm.watermark_scale_factor = 10 vm.zone_reclaim_mode = 0 ### ip addr: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 02:07:29:30:86:8c brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:32:c3:9f:6a:08 brd ff:ff:ff:ff:ff:ff ### partitions: major minor #blocks name 179 0 31205376 mmcblk0 179 1 30879744 mmcblk0p1 179 32 7634944 mmcblk2 252 0 1018652 zram0 252 1 51200 zram1 ### df: tmpfs 199M 3.4M 196M 2% /run /dev/mmcblk0p1 29G 4.9G 24G 18% / tmpfs 995M 0 995M 0% /dev/shm tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 995M 0 995M 0% /tmp /dev/zram1 47M 2.8M 41M 7% /var/log ### lsblk: NAME FSTYPE SIZE MOUNTPOINT UUID mmcblk0 29.8G └─mmcblk0p1 ext4 29.4G / 71b44a6c-5bb8-4352-afe7-d22b8e62de4c mmcblk2 swap 7.3G 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 mmcblk2boot0 swap 4M 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 mmcblk2boot1 swap 4M 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 zram1 50M /var/log zram2 0B ### zramctl: NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT /dev/zram1 zstd 50M 68K 728B 44K 4 /var/log /dev/zram0 lzo-rle 994.8M 4K 74B 12K 4 [SWAP] ### mtab: /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 ### mmc0:0001 info: fwrev: 0x0 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=USD MODALIAS=mmc:block cid: 1d414455534400001000005ae0016181 rca: 0x0001 csd: 400e00325b590000ee137f800a40004d manfid: 0x00001d ocr: 0x00200000 preferred_erase_size: 4194304 type: SD hwrev: 0x1 date: 01/2022 dsr: 0x404 erase_size: 512 oemid: 0x4144 serial: 0x00005ae0 ssr: 000000000500000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 scr: 02b5808200000000 name: USD ### mmc2:0001 info: fwrev: 0x0600000000000000 uevent: DRIVER=mmcblk MMC_TYPE=MMC MMC_NAME=8GTF4R MODALIAS=mmc:block cid: 15010038475446345206d410e21fc801 rel_sectors: 0x1 enhanced_rpmb_supported: 0x1 rca: 0x0001 pre_eol_info: 0x01 csd: d02701320f5903fff6dbffef8e40400d manfid: 0x000015 ocr: 0x00200000 preferred_erase_size: 4194304 enhanced_area_offset: 18446744073709551594 raw_rpmb_size_mult: 0x4 type: MMC hwrev: 0x0 date: 12/2021 prv: 0x6 ffu_capable: 1 dsr: 0x404 erase_size: 524288 life_time: 0x01 0x01 enhanced_area_size: 4294967274 oemid: 0x0100 serial: 0xd410e21f cmdq_en: 0 rev: 0x8 name: 8GTF4R ### Boot system health: Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 11:48:18: 1608MHz 1.34 46% 19% 13% 0% 12% 0% 65.9°C 0/9 11:48:18: 1080MHz 1.34 11% 6% 4% 1% 0% 0% 65.9°C 0/9 11:48:18: 816MHz 1.34 12% 7% 3% 1% 0% 0% 61.8°C 0/9 11:48:19: 888MHz 1.34 13% 9% 2% 1% 0% 0% 60.3°C 0/9 11:48:19: 1800MHz 1.34 12% 10% 2% 0% 0% 0% 62.2°C 0/9 ### Activated 1 lzo-rle zram swap devices with 994MB each. ### Activated Armbian ramlog partition with zstd compression Tue Jun 28 07:44:49 AM CST 2022 | Orange Pi 3 LTS | 22.05.3 | arm64 | aarch64 | 5.15.48-sunxi64 ### dmesg: [ 1.271004] i2c_dev: i2c /dev entries driver [ 1.271798] sunxi-wdt 7020400.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.273360] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pm not found, using dummy regulator [ 1.273780] sdhci: Secure Digital Host Controller Interface driver [ 1.273788] sdhci: Copyright(c) Pierre Ossman [ 1.273812] Synopsys Designware Multimedia Card Interface Driver [ 1.274605] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.274770] sun50i-h6-r-pinctrl 7022000.pinctrl: supply vcc-pl not found, using dummy regulator [ 1.276126] ledtrig-cpu: registered to indicate activity on CPUs [ 1.276686] sun8i-ce 1904000.crypto: Set mod clock to 300000000 (300 Mhz) from 24000000 (24 Mhz) [ 1.276980] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.277121] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.277218] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.277342] sun8i-ce 1904000.crypto: will run requests pump with realtime priority [ 1.277430] sun8i-ce 1904000.crypto: Register cbc(aes) [ 1.277588] sun8i-ce 1904000.crypto: Register ecb(aes) [ 1.277706] sun8i-ce 1904000.crypto: Register cbc(des3_ede) [ 1.277822] sun8i-ce 1904000.crypto: Register ecb(des3_ede) [ 1.277932] sun8i-ce 1904000.crypto: Register md5 [ 1.278040] sun8i-ce 1904000.crypto: Register sha1 [ 1.278147] sun8i-ce 1904000.crypto: Register sha224 [ 1.278256] sun8i-ce 1904000.crypto: Register sha256 [ 1.278363] sun8i-ce 1904000.crypto: Register sha384 [ 1.278481] sun8i-ce 1904000.crypto: Register sha512 [ 1.278588] sun8i-ce 1904000.crypto: Register stdrng [ 1.279328] sun8i-ce 1904000.crypto: CryptoEngine Die ID 0 [ 1.279920] hid: raw HID events driver (C) Jiri Kosina [ 1.280051] usbcore: registered new interface driver usbhid [ 1.280059] usbhid: USB HID core driver [ 1.280834] random: crng init done [ 1.283096] NET: Registered PF_INET6 protocol family [ 1.870220] Freeing initrd memory: 12684K [ 1.898842] Segment Routing with IPv6 [ 1.898907] In-situ OAM (IOAM) with IPv6 [ 1.898991] NET: Registered PF_PACKET protocol family [ 1.899097] 8021q: 802.1Q VLAN Support v1.8 [ 1.899247] 9pnet: Installing 9P2000 support [ 1.899322] Key type dns_resolver registered [ 1.899785] registered taskstats version 1 [ 1.899801] Loading compiled-in X.509 certificates [ 1.903658] Loaded X.509 cert 'Build time autogenerated kernel key: 32330adefd2da02e444296fafd37464380789679' [ 1.906608] zswap: loaded using pool zstd/z3fold [ 1.907226] Key type ._fscrypt registered [ 1.907235] Key type .fscrypt registered [ 1.907240] Key type fscrypt-provisioning registered [ 1.908245] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no [ 1.922095] Key type encrypted registered [ 1.922126] AppArmor: AppArmor sha1 policy hashing enabled [ 1.922166] ima: No TPM chip found, activating TPM-bypass! [ 1.922195] ima: Allocated hash algorithm: sha1 [ 1.922227] ima: No architecture policies found [ 1.922282] evm: Initialising EVM extended attributes: [ 1.922287] evm: security.selinux [ 1.922292] evm: security.SMACK64 [ 1.922296] evm: security.SMACK64EXEC [ 1.922300] evm: security.SMACK64TRANSMUTE [ 1.922304] evm: security.SMACK64MMAP [ 1.922308] evm: security.apparmor [ 1.922313] evm: security.ima [ 1.922317] evm: security.capability [ 1.922321] evm: HMAC attrs: 0x1 [ 1.935406] platform 1100000.mixer: Fixing up cyclic dependency with 6510000.tcon-top [ 1.935756] sun8i-mixer 1100000.mixer: Adding to iommu group 0 [ 1.937838] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.937871] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1 [ 1.938040] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f064 hci version 0x100 quirks 0x0000000002010010 [ 1.938102] xhci-hcd xhci-hcd.1.auto: irq 43, io mem 0x05200000 [ 1.938567] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.938584] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.938594] usb usb1: Product: xHCI Host Controller [ 1.938603] usb usb1: Manufacturer: Linux 5.15.48-sunxi64 xhci-hcd [ 1.938611] usb usb1: SerialNumber: xhci-hcd.1.auto [ 1.939145] hub 1-0:1.0: USB hub found [ 1.939190] hub 1-0:1.0: 1 port detected [ 1.939527] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 1.939547] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2 [ 1.939567] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 1.939664] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.939823] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 1.939836] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.939846] usb usb2: Product: xHCI Host Controller [ 1.939854] usb usb2: Manufacturer: Linux 5.15.48-sunxi64 xhci-hcd [ 1.939863] usb usb2: SerialNumber: xhci-hcd.1.auto [ 1.940275] hub 2-0:1.0: USB hub found [ 1.940310] hub 2-0:1.0: 1 port detected [ 1.942951] sun50i_cpufreq_nvmem: Using CPU speed bin speed0 [ 1.944731] scpi_protocol scpi: SCP Protocol 0.0 Firmware 0.0.0 version [ 1.951102] of_cfs_init [ 1.951222] of_cfs_init: OK [ 1.951547] ALSA device list: [ 1.951553] No soundcards found. [ 1.952660] Freeing unused kernel memory: 2496K [ 1.985358] Run /init as init process [ 1.985366] with arguments: [ 1.985373] /init [ 1.985378] with environment: [ 1.985383] HOME=/ [ 1.985388] TERM=linux [ 1.985393] ubootpart=ce3dfe46-01 [ 1.985398] cgroup_enable=memory [ 2.197340] usb 1-1: new full-speed USB device number 2 using xhci-hcd [ 2.350433] usb 1-1: New USB device found, idVendor=045e, idProduct=0745, bcdDevice= 6.33 [ 2.350464] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.350474] usb 1-1: Product: Microsoft® 2.4GHz Transceiver v7.0 [ 2.350483] usb 1-1: Manufacturer: Microsoft [ 2.375225] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.0/0003:045E:0745.0001/input/input0 [ 2.438207] hid-generic 0003:045E:0745.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input0 [ 2.442434] axp20x-i2c 0-0036: AXP20x variant AXP806 found [ 2.450726] input: axp20x-pek as /devices/platform/soc/7081400.i2c/i2c-0/0-0036/axp221-pek/input/input1 [ 2.454955] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Mouse as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.1/0003:045E:0745.0002/input/input2 [ 2.460662] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Consumer Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.1/0003:045E:0745.0002/input/input3 [ 2.462363] vdd-cpu: supplied by vcc-5v [ 2.463981] vdd-gpu: supplied by vcc-5v [ 2.464566] vdd-sys: Bringing 900000uV into 960000-960000uV [ 2.464950] vdd-sys: supplied by vcc-5v [ 2.465877] vcc-dram: supplied by vcc-5v [ 2.466667] vcc-pl-led-ir: supplied by vcc-5v [ 2.467435] vcc33-audio-tv-ephy-mac: Bringing 700000uV into 3300000-3300000uV [ 2.467815] vcc33-audio-tv-ephy-mac: supplied by vcc-5v [ 2.517838] hid-generic 0003:045E:0745.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input1 [ 2.526830] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 Consumer Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.2/0003:045E:0745.0003/input/input4 [ 2.574062] vcc33-io-pd-emmc-sd-usb-uart-1: Bringing 700000uV into 3300000-3300000uV [ 2.574423] vcc33-io-pd-emmc-sd-usb-uart-1: supplied by vcc-5v [ 2.575457] vcc18-dram-bias-pll: supplied by vcc-5v [ 2.576536] vcc-efuse-pcie-hdmi-pc: supplied by vcc-5v [ 2.577198] vcc-wifi-io-pm-pg: Bringing 700000uV into 1800000-1800000uV [ 2.577534] vcc-wifi-io-pm-pg: supplied by vcc-5v [ 2.578659] bldo4: supplied by vcc-5v [ 2.579187] vcc33-io-pd-emmc-sd-usb-uart-2: supplied by vcc-5v [ 2.580004] cldo2: supplied by vcc-5v [ 2.580651] cldo3: supplied by vcc-5v [ 2.580881] sw: supplied by regulator-dummy [ 2.581462] axp20x-i2c 0-0036: AXP20X driver loaded [ 2.587289] input: Microsoft Microsoft® 2.4GHz Transceiver v7.0 System Control as /devices/platform/soc/5200000.usb/xhci-hcd.1.auto/usb1/1-1/1-1:1.2/0003:045E:0745.0003/input/input6 [ 2.587787] hid-generic 0003:045E:0745.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Microsoft Microsoft® 2.4GHz Transceiver v7.0] on usb-xhci-hcd.1.auto-1/input2 [ 2.590166] sun50i-h6-pinctrl 300b000.pinctrl: initialized sunXi PIO driver [ 2.590661] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pb not found, using dummy regulator [ 2.591648] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator [ 2.592259] printk: console [ttyS0] disabled [ 2.592370] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 35, base_baud = 1500000) is a 16550A [ 2.592603] printk: console [ttyS0] enabled [ 2.594026] sun4i-drm display-engine: Adding to iommu group 0 [ 2.614241] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800008e16990) [ 2.614521] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800008e1abb8) [ 2.614859] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800008e11ba0) [ 2.614950] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator [ 2.615547] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY) [ 2.615931] sun8i-dw-hdmi 6000000.hdmi: EVENT=plugin [ 2.616321] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.616766] sun4i-drm display-engine: bound 6000000.hdmi (ops 0xffff800008e15cc8) [ 2.627717] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 [ 2.627781] sun8i-dw-hdmi 6000000.hdmi: read_hpd result: 1 [ 2.785963] Console: switching to colour frame buffer device 240x67 [ 2.835811] sun4i-drm display-engine: [drm] fb0: sun4i-drmdrmfb frame buffer device [ 2.857467] acx00-codec acx00-codec: DMA mask not set [ 2.859822] sun50i-h6-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator [ 2.862436] sunxi-mmc 4020000.mmc: Got CD GPIO [ 2.862855] vcc-wifi-io: supplied by vcc33-wifi [ 2.865691] ehci-platform 5101000.usb: EHCI Host Controller [ 2.865735] ehci-platform 5101000.usb: new USB bus registered, assigned bus number 3 [ 2.865880] ehci-platform 5101000.usb: irq 41, io mem 0x05101000 [ 2.885309] ehci-platform 5101000.usb: USB 2.0 started, EHCI 1.00 [ 2.885313] sunxi-mmc 4022000.mmc: initialized, max. request size: 2048 KB, uses new timings mode [ 2.885574] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 2.885643] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.885658] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.885669] usb usb3: Product: EHCI Host Controller [ 2.885677] usb usb3: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd [ 2.885686] usb usb3: SerialNumber: 5101000.usb [ 2.886286] hub 3-0:1.0: USB hub found [ 2.886349] hub 3-0:1.0: 1 port detected [ 2.887655] ehci-platform 5311000.usb: EHCI Host Controller [ 2.887708] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 4 [ 2.887848] ehci-platform 5311000.usb: irq 44, io mem 0x05311000 [ 2.905298] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00 [ 2.905653] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.905668] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.905678] usb usb4: Product: EHCI Host Controller [ 2.905687] usb usb4: Manufacturer: Linux 5.15.48-sunxi64 ehci_hcd [ 2.905695] usb usb4: SerialNumber: 5311000.usb [ 2.906266] hub 4-0:1.0: USB hub found [ 2.906311] hub 4-0:1.0: 1 port detected [ 2.907463] ohci-platform 5101400.usb: Generic Platform OHCI controller [ 2.907502] ohci-platform 5101400.usb: new USB bus registered, assigned bus number 5 [ 2.907639] ohci-platform 5101400.usb: irq 42, io mem 0x05101400 [ 2.920322] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.922092] mmc0: Problem switching card into high-speed mode! [ 2.922211] mmc0: new SDHC card at address 0001 [ 2.923101] mmcblk0: mmc0:0001 USD 29.8 GiB [ 2.925179] mmcblk0: p1 [ 2.969595] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 2.969624] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.969635] usb usb5: Product: Generic Platform OHCI controller [ 2.969643] usb usb5: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd [ 2.969652] usb usb5: SerialNumber: 5101400.usb [ 2.970330] hub 5-0:1.0: USB hub found [ 2.970383] hub 5-0:1.0: 1 port detected [ 2.971617] ohci-platform 5311400.usb: Generic Platform OHCI controller [ 2.971660] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 6 [ 2.971801] ohci-platform 5311400.usb: irq 45, io mem 0x05311400 [ 3.017445] mmc2: new HS200 MMC card at address 0001 [ 3.018424] mmcblk2: mmc2:0001 8GTF4R 7.28 GiB [ 3.020685] mmcblk2boot0: mmc2:0001 8GTF4R 4.00 MiB [ 3.022339] mmcblk2boot1: mmc2:0001 8GTF4R 4.00 MiB [ 3.033624] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.15 [ 3.033662] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.033673] usb usb6: Product: Generic Platform OHCI controller [ 3.033682] usb usb6: Manufacturer: Linux 5.15.48-sunxi64 ohci_hcd [ 3.033690] usb usb6: SerialNumber: 5311400.usb [ 3.034410] hub 6-0:1.0: USB hub found [ 3.034470] hub 6-0:1.0: 1 port detected [ 3.035805] usb_phy_generic usb_phy_generic.4.auto: supply vcc not found, using dummy regulator [ 3.036009] usb_phy_generic usb_phy_generic.4.auto: dummy supplies not allowed for exclusive requests [ 3.133661] musb-hdrc musb-hdrc.5.auto: MUSB HDRC host driver [ 3.133704] musb-hdrc musb-hdrc.5.auto: new USB bus registered, assigned bus number 7 [ 3.133977] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 3.133993] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.134004] usb usb7: Product: MUSB HDRC host driver [ 3.134012] usb usb7: Manufacturer: Linux 5.15.48-sunxi64 musb-hcd [ 3.134020] usb usb7: SerialNumber: musb-hdrc.5.auto [ 3.134715] hub 7-0:1.0: USB hub found [ 3.134773] hub 7-0:1.0: 1 port detected [ 3.150722] dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found [ 3.150748] dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found [ 3.151052] dwmac-sun8i 5020000.ethernet: supply phy-io not found, using dummy regulator [ 3.151322] dwmac-sun8i 5020000.ethernet: PTP uses main clock [ 3.151370] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 50000) [ 3.257560] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported [ 3.257587] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported [ 3.257594] dwmac-sun8i 5020000.ethernet: COE Type 2 [ 3.257604] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported [ 3.257612] dwmac-sun8i 5020000.ethernet: Normal descriptors [ 3.257619] dwmac-sun8i 5020000.ethernet: Chain mode enabled [ 3.485042] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null). Quota mode: none. [ 3.701321] usb 5-1: new full-speed USB device number 2 using ohci-platform [ 3.938354] usb 5-1: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=12.10 [ 3.938383] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.938394] usb 5-1: Product: USB Receiver [ 3.938402] usb 5-1: Manufacturer: Logitech [ 3.947518] input: Logitech USB Receiver as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.0/0003:046D:C52B.0004/input/input7 [ 4.006002] hid-generic 0003:046D:C52B.0004: input,hidraw3: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-5101400.usb-1/input0 [ 4.012208] input: Logitech USB Receiver Mouse as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input8 [ 4.012665] input: Logitech USB Receiver Consumer Control as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input9 [ 4.069662] input: Logitech USB Receiver System Control as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.1/0003:046D:C52B.0005/input/input10 [ 4.070031] hid-generic 0003:046D:C52B.0005: input,hiddev97,hidraw4: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-5101400.usb-1/input1 [ 4.074797] hid-generic 0003:046D:C52B.0006: hiddev98,hidraw5: USB HID v1.11 Device [Logitech USB Receiver] on usb-5101400.usb-1/input2 [ 4.780230] systemd[1]: System time before build time, advancing clock. [ 4.868365] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq [ 4.877545] systemd[1]: systemd 249.11-0ubuntu3.1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 4.878226] systemd[1]: Detected architecture arm64. [ 4.881592] systemd[1]: Hostname set to <orangepi3-lts>. [ 5.101862] sunxi-mmc 4021000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 5.119516] mmc1: new high speed SDIO card at address 8800 [ 6.293876] systemd[1]: Queued start job for default target Graphical Interface. [ 6.299750] systemd[1]: Created slice Slice /system/modprobe. [ 6.302537] systemd[1]: Created slice Slice /system/serial-getty. [ 6.304385] systemd[1]: Created slice User and Session Slice. [ 6.305369] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 6.306819] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 6.307696] systemd[1]: Reached target Remote File Systems. [ 6.308041] systemd[1]: Reached target Slice Units. [ 6.308380] systemd[1]: Reached target Swaps. [ 6.308677] systemd[1]: Reached target System Time Set. [ 6.309210] systemd[1]: Reached target Local Verity Protected Volumes. [ 6.310301] systemd[1]: Listening on Syslog Socket. [ 6.311159] systemd[1]: Listening on fsck to fsckd communication Socket. [ 6.311801] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 6.313180] systemd[1]: Listening on Journal Audit Socket. [ 6.314227] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.315211] systemd[1]: Listening on Journal Socket. [ 6.326975] systemd[1]: Listening on udev Control Socket. [ 6.328076] systemd[1]: Listening on udev Kernel Socket. [ 6.332683] systemd[1]: Mounting Huge Pages File System... [ 6.338074] systemd[1]: Mounting POSIX Message Queue File System... [ 6.343823] systemd[1]: Mounting Kernel Debug File System... [ 6.345097] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 6.352304] systemd[1]: Starting Restore / save the current clock... [ 6.358015] systemd[1]: Starting Set the console keyboard layout... [ 6.364390] systemd[1]: Starting Create List of Static Device Nodes... [ 6.371017] systemd[1]: Starting Load Kernel Module configfs... [ 6.377727] systemd[1]: Starting Load Kernel Module drm... [ 6.384315] systemd[1]: Starting Load Kernel Module fuse... [ 6.391403] systemd[1]: Started Nameserver information manager. [ 6.392936] systemd[1]: Reached target Preparation for Network. [ 6.394122] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 6.406943] systemd[1]: Starting Load Kernel Modules... [ 6.412637] systemd[1]: Starting Remount Root and Kernel File Systems... [ 6.418869] systemd[1]: Starting Coldplug All udev Devices... [ 6.429912] systemd[1]: Mounted Huge Pages File System. [ 6.431274] systemd[1]: Mounted POSIX Message Queue File System. [ 6.432661] systemd[1]: Mounted Kernel Debug File System. [ 6.435426] systemd[1]: Finished Restore / save the current clock. [ 6.438862] systemd[1]: Finished Create List of Static Device Nodes. [ 6.439496] fuse: init (API version 7.34) [ 6.441770] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 6.443183] systemd[1]: Finished Load Kernel Module configfs. [ 6.446061] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 6.447247] systemd[1]: Finished Load Kernel Module drm. [ 6.449663] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 6.450951] systemd[1]: Finished Load Kernel Module fuse. [ 6.458776] systemd[1]: Mounting FUSE Control File System... [ 6.464040] systemd[1]: Mounting Kernel Configuration File System... [ 6.474677] systemd[1]: Mounted FUSE Control File System. [ 6.475071] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro. Quota mode: none. [ 6.481615] systemd[1]: Finished Remount Root and Kernel File Systems. [ 6.483009] systemd[1]: Mounted Kernel Configuration File System. [ 6.483907] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 6.488816] systemd[1]: Starting Load/Save Random Seed... [ 6.494729] systemd[1]: Starting Create System Users... [ 6.660140] WCN: marlin_init entry! [ 6.660666] WCN: wcn config bt wake host [ 6.660887] WCN_ERR: dts node for bt_wake not found [ 6.660891] WCN: marlin2 parse_dt some para not config [ 6.660903] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 [ 6.665745] sdiohal:sdiohal_init ok [ 6.666445] WCN: marlin_probe ok! [ 6.691458] mtty_probe init device addr: 0x00000000009926d4 [ 6.691698] -->rfkill_bluetooth_init [ 6.691861] bluetooth_set_power: start_block=1 [ 6.691875] WCN: marlin power state:0, subsys: [MARLIN_BLUETOOTH] power 0 [ 6.691886] bluetooth_set_power: end_block=1 [ 6.691905] <--rfkill_bluetooth_init [ 6.715886] systemd[1]: Finished Load/Save Random Seed. [ 6.718379] systemd[1]: Finished Create System Users. [ 6.719559] systemd[1]: Condition check resulted in First Boot Complete being skipped. [ 6.724878] systemd[1]: Starting Create Static Device Nodes in /dev... [ 6.796727] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.798565] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.819533] [ADDR_MGT] addr_mgt_probe: module version: v1.0.9 [ 6.819648] [ADDR_MGT] addr_mgt_probe: success. [ 6.863106] systemd[1]: Finished Set the console keyboard layout. [ 6.887348] WCN: start_marlin [MARLIN_WIFI] [ 6.887375] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 [ 6.887385] WCN: the first power on start [ 6.894415] systemd[1]: Finished Create Static Device Nodes in /dev. [ 6.901977] systemd[1]: Reached target Preparation for Local File Systems. [ 6.914256] systemd[1]: Mounting /tmp... [ 6.928825] systemd[1]: Starting Rule-based Manager for Device Events and Files... [ 6.939787] systemd[1]: Mounted /tmp. [ 6.947152] systemd[1]: Reached target Local File Systems. [ 6.959184] systemd[1]: Starting Armbian leds state... [ 6.971551] systemd[1]: Starting Armbian ZRAM config... [ 6.984210] systemd[1]: Starting Set console font and keymap... [ 6.993355] WCN: marlin chip en dummy pull up -- need manually set GPIO [ 6.996364] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data... [ 7.021397] sdiohal:sdiohal_scan_card [ 7.021668] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=50000000 [ 7.021795] systemd[1]: Starting Set Up Additional Binary Formats... [ 7.021816] WCN: marlin_scan_finish! [ 7.021823] sdiohal:probe ok [ 7.021979] sdiohal:scan end! [ 7.021987] WCN: then marlin start to download [ 7.022257] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 [ 7.022272] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! [ 7.029127] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 7.029487] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 7.032823] systemd[1]: Finished Set console font and keymap. [ 7.046131] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 365 (systemd-binfmt) [ 7.052057] systemd[1]: Mounting Arbitrary Executable File Formats File System... [ 7.083231] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data. [ 7.134889] systemd[1]: Finished Coldplug All udev Devices. [ 7.189454] systemd[1]: Starting Helper to synchronize boot up for ifupdown... [ 7.200737] systemd[1]: Mounted Arbitrary Executable File Formats File System. [ 7.220106] systemd[1]: Finished Set Up Additional Binary Formats. [ 7.250460] systemd[1]: Finished Helper to synchronize boot up for ifupdown. [ 7.311656] systemd[1]: Finished Armbian leds state. [ 7.592733] systemd[1]: Started Rule-based Manager for Device Events and Files. [ 7.600572] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 7.601200] systemd[1]: Started Dispatch Password Requests to Console Directory Watch when bootsplash is active. [ 7.616428] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 7.616576] systemd[1]: Reached target Local Encrypted Volumes. [ 7.674195] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ 7.714809] systemd[1]: Starting Load/Save RF Kill Switch Status... [ 7.775762] bluetooth_set_power: start_block=0 [ 7.775792] WCN: start_marlin [MARLIN_BLUETOOTH] [ 7.975324] zram: Added device: zram0 [ 7.975654] zram: Added device: zram1 [ 7.976033] zram: Added device: zram2 [ 8.094917] WCN: combin_img 0 marlin_firmware_write finish and successful [ 8.095242] WCN: marlin_start_run read reset reg val:0x1 [ 8.095250] WCN: after do marlin_start_run reset reg val:0x0 [ 8.095433] WCN: s_marlin_bootup_time=8095432843 [ 8.101544] WCN: clock mode: TSX [ 8.101736] WCN: marlin_write_cali_data sync init_state:0x0 [ 8.132768] WCN: marlin_write_cali_data sync init_state:0x0 [ 8.159666] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1 [ 8.159698] WCN: sdio_config bt_wake_host trigger:[high] [ 8.159701] WCN: sdio_config irq:[inband] [ 8.159703] WCN: sdio_config wake_host_level_duration_time:[20ms] [ 8.159708] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse] [ 8.159710] WCN: marlin_send_sdio_config_to_cp sdio_config:0x80f01 (enable config) [ 8.160558] WCN: marlin_write_cali_data finish [ 8.161314] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.177333] mc: Linux media interface: v0.10 [ 8.190592] panfrost 1800000.gpu: clock rate = 432000000 [ 8.190630] panfrost 1800000.gpu: bus_clock rate = 100000000 [ 8.191105] panfrost 1800000.gpu: mali-t720 id 0x720 major 0x1 minor 0x1 status 0x0 [ 8.191128] panfrost 1800000.gpu: features: 00000000,10309e40, issues: 00000000,21054400 [ 8.191136] panfrost 1800000.gpu: Features: L2:0x07110206 Shader:0x00000000 Tiler:0x00000809 Mem:0x1 MMU:0x00002821 AS:0xf JS:0x7 [ 8.191144] panfrost 1800000.gpu: shader_present=0x3 l2_present=0x1 [ 8.191541] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.192979] [drm] Initialized panfrost 1.2.0 20180908 for 1800000.gpu on minor 1 [ 8.217760] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.228323] videodev: Linux video capture interface: v2.00 [ 8.248869] zram0: detected capacity change from 0 to 2037304 [ 8.249575] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 [ 8.279502] systemd[1]: Found device /dev/ttyS0. [ 8.287283] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0 [ 8.287302] WCN: marlin_bind_verify confuse data: 0xe5ae06b9a313020e4477650022a32ad5 [ 8.287317] WCN: marlin_bind_verify verify data: 0xa5ab8048e6a32ce226d910652b504834 [ 8.288057] WCN: check_cp_ready sync val:0xf0f0f0f8, prj_type val:0x0 [ 8.313569] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0 [ 8.313595] sdiohal:sdiohal_runtime_get entry [ 8.317949] WCN: get_cp2_version entry! [ 8.337651] Adding 1018648k swap on /dev/zram0. Priority:5 extents:1 across:1018648k SSFS [ 8.357401] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~ [ 8.358024] WCN: switch_cp2_log - close entry! [ 8.359418] WCN: WCND at cmd read:OK [ 8.359553] WCN: then marlin download finished and run ok [ 8.359585] WCN: start_loopcheck [ 8.359607] WCN: marlin power state:4, subsys: [MARLIN_BLUETOOTH] power 1 [ 8.359615] WCN: marlin have open, GNSS is closed [ 8.359620] bluetooth_set_power: end_block=0 [ 8.377701] systemd[1]: Started Load/Save RF Kill Switch Status. [ 8.392873] WCN: get_board_ant_num [one_ant] [ 8.392894] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini [ 8.421557] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned. [ 8.426838] cedrus 1c0e000.video-codec: Adding to iommu group 0 [ 8.435265] cedrus 1c0e000.video-codec: Device registered as /dev/video0 [ 8.475450] Registered IR keymap rc-empty [ 8.493733] rc rc0: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0 [ 8.508606] rc rc0: lirc_dev: driver sunxi-ir registered at minor = 0, raw IR receiver, no transmitter [ 8.514745] input: sunxi-ir as /devices/platform/soc/7040000.ir/rc/rc0/input12 [ 8.515268] sunxi-ir 7040000.ir: initialized sunXi IR driver [ 8.558655] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings. [ 8.571387] zram1: detected capacity change from 0 to 102400 [ 8.589949] systemd[1]: Finished Load Kernel Modules. [ 8.626023] systemd[1]: Starting Apply Kernel Variables... [ 8.701400] systemd[1]: Finished Armbian ZRAM config. [ 8.724623] systemd[1]: Starting Armbian memory supported logging... [ 8.741406] systemd[1]: Finished Apply Kernel Variables. [ 8.759248] systemd[1]: Starting Raise network interfaces... [ 8.928132] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard. Quota mode: none. [ 9.050204] logitech-djreceiver 0003:046D:C52B.0006: hiddev97,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-5101400.usb-1/input2 [ 9.206494] input: Logitech Wireless Device PID:4004 Keyboard as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.2/0003:046D:C52B.0006/0003:046D:4004.0007/input/input13 [ 9.274225] hid-generic 0003:046D:4004.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech Wireless Device PID:4004] on usb-5101400.usb-1/input2:1 [ 9.465060] input: Logitech K360 as /devices/platform/soc/5101400.usb/usb5/5-1/5-1:1.2/0003:046D:C52B.0006/0003:046D:4004.0007/input/input17 [ 9.465977] logitech-hidpp-device 0003:046D:4004.0007: input,hidraw4: USB HID v1.11 Keyboard [Logitech K360] on usb-5101400.usb-1/input2:1 [ 9.758059] systemd[1]: Finished Raise network interfaces. [ 9.909199] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 9.909534] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 9.909890] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 9.913981] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 9.914092] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 9.914197] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 9.914269] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 9.998835] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 9.999036] systemd[1]: Condition check resulted in Show Plymouth Boot Screen being skipped. [ 9.999099] systemd[1]: Condition check resulted in Forward Password Requests to Plymouth Directory Watch being skipped. [ 9.999176] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped. [ 9.999275] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped. [ 9.999378] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. [ 11.570712] systemd[1]: Finished Armbian memory supported logging. [ 11.580348] systemd[1]: Starting Journal Service... [ 11.722747] systemd[1]: Started Journal Service. [ 11.751364] systemd-journald[691]: Received client request to flush runtime journal. ### armbian-release: # PLEASE DO NOT EDIT THIS FILE BOARD=orangepi3-lts BOARD_NAME="Orange Pi 3 LTS" BOARDFAMILY=sun50iw6 BUILD_REPOSITORY_URL=https://github.com/armbian/build BUILD_REPOSITORY_COMMIT=13f5fba13c VERSION=22.05.3 LINUXFAMILY=sunxi64 ARCH=arm64 IMAGE_TYPE=stable BOARD_TYPE=conf INITRD_ARCH=arm64 KERNEL_IMAGE_TYPE=stable BRANCH=current ### boot environment: verbosity=1 bootlogo=false console=both disp_mode=1920x1080p60 overlay_prefix=sun50i-h6 rootdev=UUID=71b44a6c-5bb8-4352-afe7-d22b8e62de4c rootfstype=ext4 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u ### lsusb: Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ### lscpu: Architecture: aarch64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Vendor ID: ARM Model name: Cortex-A53 Model: 4 Thread(s) per core: 1 Core(s) per cluster: 4 Socket(s): - Cluster(s): 1 Stepping: r0p4 CPU max MHz: 1800.0000 CPU min MHz: 480.0000 BogoMIPS: 48.00 Flags: fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid NUMA node(s): 1 NUMA node0 CPU(s): 0-3 Vulnerability Itlb multihit: Not affected Vulnerability L1tf: Not affected Vulnerability Mds: Not affected Vulnerability Meltdown: Not affected Vulnerability Mmio stale data: Not affected Vulnerability Spec store bypass: Not affected Vulnerability Spectre v1: Mitigation; __user pointer sanitization Vulnerability Spectre v2: Not affected Vulnerability Srbds: Not affected Vulnerability Tsx async abort: Not affected ### cpuinfo: processor : 0 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 1 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 2 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 processor : 3 BogoMIPS : 48.00 Features : fp asimd evtstrm aes pmull sha1 sha2 crc32 cpuid CPU implementer : 0x41 CPU architecture: 8 CPU variant : 0x0 CPU part : 0xd03 CPU revision : 4 ### meminfo: MemTotal: 2037300 kB MemFree: 1845816 kB MemAvailable: 1851728 kB Buffers: 12532 kB Cached: 53568 kB SwapCached: 0 kB Active: 32208 kB Inactive: 52908 kB Active(anon): 444 kB Inactive(anon): 22100 kB Active(file): 31764 kB Inactive(file): 30808 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 1018648 kB SwapFree: 1018648 kB Dirty: 3392 kB Writeback: 0 kB AnonPages: 19056 kB Mapped: 16768 kB Shmem: 3388 kB KReclaimable: 10580 kB Slab: 45824 kB SReclaimable: 10580 kB SUnreclaim: 35244 kB KernelStack: 2464 kB PageTables: 1652 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2037296 kB Committed_AS: 42432 kB VmallocTotal: 133143592960 kB VmallocUsed: 22700 kB VmallocChunk: 0 kB Percpu: 976 kB AnonHugePages: 0 kB ShmemHugePages: 0 kB ShmemPmdMapped: 0 kB FileHugePages: 0 kB FilePmdMapped: 0 kB CmaTotal: 131072 kB CmaFree: 128768 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB Hugetlb: 0 kB ### virtual memory: vm.admin_reserve_kbytes = 8192 vm.compaction_proactiveness = 20 vm.compact_unevictable_allowed = 1 vm.dirty_background_bytes = 0 vm.dirty_background_ratio = 10 vm.dirty_bytes = 0 vm.dirty_expire_centisecs = 3000 vm.dirty_ratio = 20 vm.dirtytime_expire_seconds = 43200 vm.dirty_writeback_centisecs = 500 vm.extfrag_threshold = 500 vm.hugetlb_shm_group = 0 vm.laptop_mode = 0 vm.legacy_va_layout = 0 vm.lowmem_reserve_ratio = 256 256 32 0 vm.max_map_count = 65530 vm.min_free_kbytes = 22528 vm.min_slab_ratio = 5 vm.min_unmapped_ratio = 1 vm.mmap_min_addr = 32768 vm.mmap_rnd_bits = 18 vm.mmap_rnd_compat_bits = 11 vm.nr_hugepages = 0 vm.nr_hugepages_mempolicy = 0 vm.nr_overcommit_hugepages = 0 vm.numa_stat = 1 vm.numa_zonelist_order = Node vm.oom_dump_tasks = 1 vm.oom_kill_allocating_task = 0 vm.overcommit_kbytes = 0 vm.overcommit_memory = 0 vm.overcommit_ratio = 50 vm.page-cluster = 0 vm.page_lock_unfairness = 5 vm.panic_on_oom = 0 vm.percpu_pagelist_high_fraction = 0 vm.stat_interval = 1 vm.swappiness = 100 vm.user_reserve_kbytes = 63004 vm.vfs_cache_pressure = 100 vm.watermark_boost_factor = 15000 vm.watermark_scale_factor = 10 vm.zone_reclaim_mode = 0 ### ip addr: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 02:07:29:30:86:8c brd ff:ff:ff:ff:ff:ff 3: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 00:32:c3:9f:6a:08 brd ff:ff:ff:ff:ff:ff ### partitions: major minor #blocks name 179 0 31205376 mmcblk0 179 1 30879744 mmcblk0p1 179 32 7634944 mmcblk2 252 0 1018652 zram0 252 1 51200 zram1 ### df: tmpfs 199M 3.4M 196M 2% /run /dev/mmcblk0p1 29G 5.1G 24G 18% / tmpfs 995M 0 995M 0% /dev/shm tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 995M 0 995M 0% /tmp /dev/zram1 47M 3.3M 41M 8% /var/log ### lsblk: NAME FSTYPE SIZE MOUNTPOINT UUID mmcblk0 29.8G └─mmcblk0p1 ext4 29.4G / 71b44a6c-5bb8-4352-afe7-d22b8e62de4c mmcblk2 swap 7.3G 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 mmcblk2boot0 swap 4M 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 mmcblk2boot1 swap 4M 6a6f4ef8-bcc6-4021-a70f-de04ada07a25 zram1 50M /var/log zram2 0B ### zramctl: NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT /dev/zram1 zstd 50M 68K 728B 44K 4 /var/log /dev/zram0 lzo-rle 994.8M 4K 74B 12K 4 [SWAP] ### mtab: /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 ### mmc0:0001 info: fwrev: 0x0 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=USD MODALIAS=mmc:block cid: 1d414455534400001000005ae0016181 rca: 0x0001 csd: 400e00325b590000ee137f800a40004d manfid: 0x00001d ocr: 0x00200000 preferred_erase_size: 4194304 type: SD hwrev: 0x1 date: 01/2022 dsr: 0x404 erase_size: 512 oemid: 0x4144 serial: 0x00005ae0 ssr: 000000000500000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 scr: 02b5808200000000 name: USD ### mmc2:0001 info: fwrev: 0x0600000000000000 uevent: DRIVER=mmcblk MMC_TYPE=MMC MMC_NAME=8GTF4R MODALIAS=mmc:block cid: 15010038475446345206d410e21fc801 rel_sectors: 0x1 enhanced_rpmb_supported: 0x1 rca: 0x0001 pre_eol_info: 0x01 csd: d02701320f5903fff6dbffef8e40400d manfid: 0x000015 ocr: 0x00200000 preferred_erase_size: 4194304 enhanced_area_offset: 18446744073709551594 raw_rpmb_size_mult: 0x4 type: MMC hwrev: 0x0 date: 12/2021 prv: 0x6 ffu_capable: 1 dsr: 0x404 erase_size: 524288 life_time: 0x01 0x01 enhanced_area_size: 4294967274 oemid: 0x0100 serial: 0xd410e21f cmdq_en: 0 rev: 0x8 name: 8GTF4R ### Boot system health: Time CPU load %cpu %sys %usr %nice %io %irq CPU C.St. 07:44:50: 1704MHz 1.34 47% 20% 14% 0% 12% 0% 59.7°C 0/9 07:44:51: 1320MHz 1.34 11% 6% 3% 1% 0% 0% 59.7°C 0/9 07:44:51: 1080MHz 1.34 18% 11% 4% 1% 0% 0% 55.4°C 0/9 07:44:52: 1080MHz 1.34 11% 7% 2% 1% 0% 0% 54.6°C 0/9 07:44:52: 1080MHz 1.34 19% 15% 2% 0% 0% 0% 54.6°C 0/9
  4. Orangepi 3 LTS Armbian 22.05 Jammy XFCE CAN'T CONNECT WITH WIFI
×
×
  • Create New...