Litter6653

I use this Armbian_22.05.3_Orangepipc_jammy_current_5.15.48.img.xz cli only

Yes I did integrity check, and verify the flashed image, I used Balena Etcher. Also tried with multiple SD Card and flashed multiple times with same result. On first boot without updating the system I will got this root@orangepipc:~# armbianmonitor -v Starting package integrity check. This might take some time. Be patient please... It appears you may have corrupt packages. This is usually a symptom of filesystem corruption caused by SD cards or eMMC dying or burning the OS image to the installation media went wrong. The following changes from packaged state files were detected: /usr/lib/NetworkManager/conf.d/10-globally-managed-devices.conf /usr/lib/chromium-browser/master_preferences.dpkg-dist Then after updating the system, I will got this Starting package integrity check. This might take some time. Be patient please... It appears you may have corrupt packages. This is usually a symptom of filesystem corruption caused by SD cards or eMMC dying or burning the OS image to the installation media went wrong. The following changes from packaged state files were detected: /usr/lib/chromium-browser/master_preferences.dpkg-dist

I tried to execute `sudo armbianmonitor -v` and I got this result. ``` Starting package integrity check. This might take some time. Be patient please... It appears you may have corrupt packages. This is usually a symptom of filesystem corruption caused by SD cards or eMMC dying or burning the OS image to the installation media went wrong. The following changes from packaged state files were detected: /usr/lib/chromium-browser/master_preferences.dpkg-dist ``` This is from new orangepi pc board and new SD Card with new install OS.