fukowaka

thank you very much both @Seth @MattWestB

Hello there, here i am with updates. im with legacy armbian on rk3229. Octoprint works like a charm with a creality ender 3. Also webcams with fswebcam to take pictures. Wifi antenna is weak but works. Ethernet works fine. I tried to compile retroarch but i have no hardware acceleration on legacy version so im looking another way. I have a working lakka image booting from the sd card. Works really great. i burn to emmc with u-tool but no success booting... Sorry for the offtopic but is there any way to make it work? BTW i tried to debug mainline boot following yt tutorials but there is no text on the board with rx, tx or ground... i found 4 suspicious copper points, im risking to brick the device if i try?

@thiagomagamoc do you install legacy or mainline version of armbian?

I tried another sd card. Start the boot process then reboots. I change versosity to 7 and cpu-stability. armbianEnv.txt is not in /etc/ is in /boot. I cant found a boot log, there is no files in /var/log/journal so i got a picture. Let me now if you can read something unusual. thx

@jock Hello there, thanks for the reply. With armbian on emmc (legacy kernel) and sd card on slot (current kernel) boots into legacy version, i think the device try to boot from sd card but im getting some error. I change verbosity so i have a log now. I´ll try another sd card, maybe is broken. bootrk322x.rtf

i went back to 4.4 kernel. desktop version perfermance is similar to rpi3b+. Boots and shutown faster. ethernet, wifi, web browsing... so far so good.

i dont know how to extract the log from de emmc so i film the boot process. Any idea?

@Eliel Prado what kernel are you trying to boot? You should try some legacy kernel, just to see if works. https://users.armbian.com/jock/rk322x/armbian/stable/ the first one works for me. Also you can check this tutorial from a brazilian dude with nand memory.

Hello people! Reporting me here. Yesterday i succesfully boots legacy version of @jock images. He told me try to boot current versions from the mainline. Tried... rk322x-box jammy current cli 286.66 Mb kernel 5.15.63 rk322x-box jammy current xfce 723.94 Mb kernel 5.15.63 rk322x-box sid current cli 341.22 Mb kernel 5.15.63 rk322x-box sid current xfce 627.60 Mb kernel 5.15.63 Also tried Armbian_22.05.0-trunk_Rk322x-box_bullseye_current_5.15.25_minimal.img made by @jock One by one burned into the emmc. Starts booting like for 5 seconds then reboots. Last i can read is "tty2" then reboots again, endlesly Anyone know what could be happening? What can i do? Im with rk3229 1gb ram, 8 gb samsung emmc model KMVUS000LA B304. Wifi chip model: SV6051P thanks again