Jump to content

Elrie

Members
  • Posts

    4
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Yes, openjdk is available on Armbian Jammy. Actually it is from Ubuntu Jammy repositories. Default one is v11
  2. Checked different versions (including original debian). Looks like Armbian version from 20220715 works stable - no temperature sensor issues, USB works well, stable boot.
  3. Looks like last reporters have the same issue what I have. Temperature sensor reports following if I'm able to boot: root@nezha:~# cat /etc/armbianmonitor/datasources/soctemp -86297 Exactly same messages in case of boot issue as mentioned above - about temperature protection. More chances to load fine with external cooling. USB works 50/50. In dmesg the issue looks like this: [ 719.608041] usb 2-1: new high-speed USB device number 2 using ehci-platform [ 719.748025] usb 2-1: device descriptor read/64, error -71 [ 719.996036] usb 2-1: device descriptor read/64, error -71 I removed module from the dock and checked what I can with magnifying glass as it was suggested above by @antondeveloper - no any visible damage on any circuit. But after all these last experiments looks like original Debian image also boots 50/50. Changed different SD cards also Will try to solder serial pins and change SD card once again.
  4. Hi all I'm experimenting with 512 MB Lichee RV. What I observe - the board itself is very unstable, but I can't understand if it is software or hardware problem with my item. If this is not related to this thread just let me know. Two major problems observed: 1. Incorrect work of CPU temperature monitoring - in 2/3 of boot attempts it locks boot process with temperature alert (starting from 45 C and rising up to 100 C and higher). CPU at the same time might be rather hot, but not too much. I added a fan to cool and chip external temperature is not more than warm now, but issue remains. 2. USB issues - in 4/5 of boot attempts it fails to start usb correctly, and re-attach do not help. So keyboard/mouse/hub almost useless. I tried this on different images including the last one Jammy from August - situation is almost same. If someone else observes smth similar?
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines