hector campus

Sorry to make this post, but i try many tutorials and no have luck runing armbian on my tv box. i buy a tv box with allwinner h6 processor, my model is Q+ ,I know my model works with armbian because other users of the forum posted have make it with no problems. So...in my case a try these steps. 1)download armbian from here https://users.armbian.com/balbes150/ 2) unzip the image (Armbian_21.11.0-trunk_Aw-h6-tv_bullseye_current_5.10.68_xfce_desktop) 3)write the image on a sd card with disk imager. 4)put the sd card on my tvbox 5)Push with screwdriver the reset button of the tvbox (jack port) 6)power on the tvbox....and nothing happends,the tvbox dont show signal and red light turn on inside. I read on other guides i must write boot partition with another image so the tvbox can start my armbian version , but i read too that guides are outdated. Any tips and advice are well recibe, thx and sorry to make this post.

hi im newbie here, i have small question ,sorry if so simple or silly. im confused about size block on armbian system (default system archive) if a make df , the system says 1 kb . Filesystem 1K-blocks Used Available Use% Mounted on tmpfs 102300 7152 95148 7% /run /dev/mmcblk0p1 59601388 1120660 57840424 2% / tmpfs 511492 0 511492 0% /dev/shm tmpfs 5120 4 5116 1% /run/lock tmpfs 511492 0 511492 0% /tmp /dev/zram1 47960 7412 36964 17% /var/log tmpfs 102296 0 102296 0% /run/user/1000 but, if im going to sys/block/default partition (mmcblk0)/ queue and make cat physical_block_size and logical_block_size says : 512 if The size block is 1kb , why on sys/block/default partition (mmcblk0)/ queue is 512b ? thx a lot.