sciram

Thank you! I will try.

Thank you for your response! Unfortunately, it's not as easy as I suggested. My steps: 1. got the kernel source for 5.19.7 from cdn.kernel.org 2. copied /boot/config-5.19.7-station-p2 to .config 3. checked that nvm enabled 4. compiled kernel 5. installed kernel modules and kernel itself There were no errors, but OS boot stops (look at output below). Please help, what i did wrong or what else can be done? UART log: ... [ 3.901621] mmc1: new HS200 MMC card at address 0001 [ 3.902880] mmcblk1: mmc1:0001 Y2P032 29.1 GiB [ 3.906828] mmcblk1: p1 [ 3.907960] mmcblk1boot0: mmc1:0001 Y2P032 4.00 MiB [ 3.910757] mmcblk1boot1: mmc1:0001 Y2P032 4.00 MiB [ 3.913173] mmcblk1rpmb: mmc1:0001 Y2P032 16.0 MiB, chardev (239:0) [ 3.919899] dwmmc_rockchip fe000000.mmc: IDMAC supports 32-bit address mode. [ 3.920725] dwmmc_rockchip fe000000.mmc: Using internal DMA controller. [ 3.921375] dwmmc_rockchip fe000000.mmc: Version ID is 270a [ 3.922050] dwmmc_rockchip fe000000.mmc: DW MMC controller at irq 48,32 bit host data width,256 deep fifo

Hello! I have Firefly Station P2 (I use this images - https://users.armbian.com/balbes150/rk3568/) And everything is OK except for one problem: I can't see NVM disk when booting kernel 5.X, 6.X. Yet on kernel 4.X I can see nvm. Please help, what should I do to use nvm with 5.X kernel? Some output: root@station-p2:~# uname -r 6.0.0-rc4-media root@station-p2:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS mmcblk0 179:0 0 14.8G 0 disk mmcblk0p1 179:1 0 14.7G 0 part /var/log.hdd / mmcblk1 179:32 0 29.1G 0 disk mmcblk1p1 179:33 0 28.8G 0 part mmcblk1boot0 179:64 0 4M 1 disk mmcblk1boot1 179:96 0 4M 1 disk zram0 252:0 0 1.9G 0 disk [SWAP] zram1 252:1 0 50M 0 disk /var/log zram2 252:2 0 0B 0 disk root@station-p2:~# lspci root@station-p2:~# --- root@station-p2:~# uname -r 5.19.7-station-p2 root@station-p2:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS mmcblk0 179:0 0 14.8G 0 disk mmcblk0p1 179:1 0 14.7G 0 part /var/log.hdd / mmcblk1 179:32 0 29.1G 0 disk mmcblk1p1 179:33 0 28.8G 0 part mmcblk1boot0 179:64 0 4M 1 disk mmcblk1boot1 179:96 0 4M 1 disk zram0 252:0 0 1.9G 0 disk [SWAP] zram1 252:1 0 50M 0 disk /var/log zram2 252:2 0 0B 0 disk root@station-p2:~# lspci root@station-p2:~# --- root@station-p2:~# uname -r 4.19.219-station-p2 root@station-p2:~# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS mtdblock0 31:0 0 32M 0 disk mmcblk0 179:0 0 29.1G 0 disk mmcblk0p1 179:1 0 28.8G 0 part mmcblk0boot0 179:32 0 4M 1 disk mmcblk0boot1 179:64 0 4M 1 disk mmcblk1 179:96 0 14.8G 0 disk mmcblk1p1 179:97 0 14.7G 0 part /var/log.hdd / zram0 254:0 0 0B 0 disk nvme0n1 259:0 0 238.5G 0 disk nvme0n1p1 259:1 0 4M 0 part nvme0n1p2 259:2 0 4M 0 part nvme0n1p3 259:3 0 64M 0 part nvme0n1p4 259:4 0 64M 0 part nvme0n1p5 259:5 0 32M 0 part nvme0n1p6 259:6 0 2.7G 0 part nvme0n1p7 259:7 0 235.6G 0 part root@station-p2:~# lspci 0002:20:00.0 PCI bridge: Rockchip Electronics Co., Ltd RK3568 Remote Signal Processor (rev 01) 0002:21:00.0 Non-Volatile memory controller: Sandisk Corp PC SN520 NVMe SSD (rev 01)