Hello,
I am a owner of a Nokia streambox 8000. I have been trying to install Armbian on it, but without luck.
The board specification of the tv box:
Board: Amlogic S905X3 ARM Mali-G31-MP2
I have been using the images from here: (external link to site not affiliated with Armbian). I tried the S905X3 jammy and bullseye versions.
The installation procedure that I have been trying out is as following:
1. Download armbian_s905x3 img from github repository releases.
2. Use balenaEtcher to burn the image into a USB stick.
3. Once burned; Open the BOOT drive.
4. Rename u-boot-s905x2-s922.bin to u-boot.ext
5. Edit /extlinux/extlinux.conf and change the .db path to use meson-sm1-sei610.dtb
6. Insert the USB into the tv box.
7. Hold reset with toothpick while powering it on.
8. Boots into recovery mode and selext reboot from bootloader.
9. It boots up again but the display stays black.
If i boot it up without the reset with the USB inserted it just displays a black screen. If i remove the USB then it boots normally.
I have tried to connect it to LAN to see if it was exposing an IP that I could ssh into, but there was nothing.
I would love to get armbian running on the tv box. Am I doing something wrong here? By the way I’m open to both softmod and hardmod suggestions. Thanks!