Redfern89

Exactly the same for me. One of 10 times when you turn it on, it says that 4GB DRAM is not loaded further. After a reboot everything is back to normal. There is only one memory chip. sorry for bad english, i use google translate

Hello, dear members! I built the mainline kernel 6.0.8 using the config-5.15.80-sunxi64 config, but when I try to boot the system hangs on Starting the kernel. Boot log: U-Boot 2023.01-rc3-00069-g93685d0dcb-dirty (Dec 19 2022 - 11:31:13 +0300) Allwinner Technology CPU: Allwinner H6 (SUN50I) Model: OrangePi 3 LTS DRAM: 2 GiB Core: 50 devices, 14 uclasses, devicetree: separate WDT: Not starting watchdog@7020400 MMC: mmc@4020000: 0, mmc@4022000: 1 Loading Environment from FAT... Unable to use mmc 0:1... In: serial@5000000 Out: serial@5000000 Err: serial@5000000 Net: No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3259 bytes read in 2 ms (1.6 MiB/s) ## Executing script at 4fc00000 U-boot loaded from SD Boot script loaded from mmc 203 bytes read in 2 ms (98.6 KiB/s) 37640 bytes read in 6 ms (6 MiB/s) Working FDT set to 4fa00000 3844 bytes read in 5 ms (750 KiB/s) Applying kernel provided DT fixup script (sun50i-h6-fixup.scr) ## Executing script at 45000000 19076290 bytes read in 940 ms (19.4 MiB/s) 22224904 bytes read in 1094 ms (19.4 MiB/s) Moving Image from 0x40080000 to 0x40200000, end=417a0000 ## Loading init Ramdisk from Legacy Image at 4ff00000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 19076226 Bytes = 18.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 4fa00000 Booting using the fdt blob at 0x4fa00000 Working FDT set to 4fa00000 Loading Ramdisk to 48dce000, end 49fff482 ... OK Loading Device Tree to 0000000048d5c000, end 0000000048dcdfff ... OK Working FDT set to 48d5c000 Starting kernel ... Sorry, IM use google-translate