sam_uk

Going to try this https://github.com/balena-os/balena-iot-gate-imx8

I do hope to develop and maintain Armbian support for this board. Possibly based on Recent Kernel: https://github.com/voxelbotics/linux-imx

Kernel stuff https://www.nxp.com/design/design-center/software/embedded-software/i-mx-software/embedded-linux-for-i-mx-applications-processors:IMXLINUX

Because the other thread was in the wrong place, so it got locked.

Unreleased open hardware board in CM4 footprint https://www.crowdsupply.com/ov-tech-gmbh/pi-mx8-module - SOC: NXP i.MX 8M Plus - NXP guarantees production of the chip for 10 years. - 4x A53 cores at up to 1.8 GHz / 1x M7 core at up to 700 MHz - 1 GB/2 GB/4 GB/8 GB LPDDR4 system memory - Vivante GC7000UL GPU - Gigabit Ethernet PHY supporting IEEE 1588v2 and SyncE - PCIe Gen3 1x1 Interface - Optional eMMC with 8 GB/16 GB/32 GB - Optional 2.4 GHz & 5 GHz Wi-Fi + Bluetooth 5.2 (Murata LBEE5PK2BC) - Optional Coral Edge TPU connected via PCIe - Two CSI-2 interfaces, one with 4-lane and one 2-lane width Some open hardware carrier boards exist such as Twisted fields CanBUS/ Robotics Piunora Camera, Qwiic, Arduino pinout Jkiv Gigabit, uSD Will cluster RobertLukan dual camera, 40 pin header Wiretrustee SATA/ NAS Mirko PC 2x HDMI, 2x Camera, M.2, uSD, 40pin tkircher camera, Qwiic, M.2, HDMI, uSD Others I plan to use this thread to document the hardware and other related efforts to support IMX8 hardware, intending to add Armbian support for this board. So far I have found: - https://github.com/Joshua-Riek/ubuntu-apalis-imx8 - https://github.com/TechNexion-customization/ubuntu-tn-imx/tree/master?tab=readme-ov-file#technexion-ubuntu-lts-image-builder

I spotted this new board coming soon https://www.crowdsupply.com/ov-tech-gmbh/pi-mx8-module More info I appreciate it's a lot of work to support new boards, but I wondered if anyone was interested in forking this https://github.com/TechNexion-customization/ubuntu-tn-imx/tree/master?tab=readme-ov-file#technexion-ubuntu-lts-image-builder and doing a Armbian build for it?

Lichee Pi 4A is powered by a 2.5Ghz TH1520 RISC-V processor. It supports up to 16GB of RAM. It is on pre-order It intends to support Debian Is anyone else on the wait list for this ~$99 device (EST March 2023) They may also do a CM4 footprint one (or they could just be humoring me)

Looks like the same hardware as their RPI-CM4 compute module https://wiki.radxa.com/Rock5/CM

They are not available beyond developer preview yet. I'll try once they are available

As it shares the A113D do you think it would work with the BPI-CM4 too? https://wiki.banana-pi.org/BPI-CM4_Computer_module_and_development_Kit