n0153

Failover like this is typical for many platforms, it tries PXE after more usual options failed, which also visible in this log. For example it tries USB above, some other lines are also look like unsuccessful attempts to boot from different medias. I didn't build image myself, I took it from the location below. Do you think that building is preferable? from this location: https://www.armbian.com/mangopi-mq-pro/

Hi everyone! I tried to boot both Lunar and Sid and got similar UART-console output: Armbian_23.05.0-trunk-e33842ef2_Mangopi-mq_lunar_edge_6.1.0-rc3.boot.log I noticed that "/boot/dtb/allwinner/sun20i-d1-nezha.dtb" is wrong choise, found it in extlinux.conf and changed it like this(hope commenting out strings works here): label Armbian kernel /boot/Image initrd /boot/uInitrd # fdt /boot/dtb/allwinner/sun20i-d1-nezha.dtb fdt /boot/dtb/allwinner/sun20i-d1-mangopi-mq-pro.dtb append root=UUID=5e7413f7-b308-4843-b9a9-063d99cb1700 console=ttyS0,115200n8 console=tty0 earlycon=sbi cma=96M rootflags=data=writeback stmmaceth=chain_mode:1 rw rw no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 splash plymouth.ignore-serial-consoles the result was like this(this is just a tail of log): lunar_edge_tail.log Am I on the right path?