Thank you for reply.
It's definitely not fake as I use the same on Raspberry Pi and it works fine.
Raspberry pi:
sudo lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 275d:0ba6 USB OPTICAL MOUSE
Bus 001 Device 004: ID 27c0:0818 Cadwell Laboratories, Inc. Paperlike HD-FT
Bus 001 Device 003: ID 1a86:7523 QinHeng Electronics CH340 serial converter
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
sudo lsusb -t -v
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
ID 1d6b:0003 Linux Foundation 3.0 root hub
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
ID 1d6b:0002 Linux Foundation 2.0 root hub
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
ID 2109:3431 VIA Labs, Inc. Hub
|__ Port 1: Dev 3, If 0, Class=Vendor Specific Class, Driver=ch341, 12M
ID 1a86:7523 QinHeng Electronics CH340 serial converter
|__ Port 2: Dev 4, If 1, Class=Human Interface Device, Driver=usbhid, 12M
ID 27c0:0818 Cadwell Laboratories, Inc. Paperlike HD-FT
|__ Port 2: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 12M
ID 27c0:0818 Cadwell Laboratories, Inc. Paperlike HD-FT
|__ Port 3: Dev 5, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
ID 275d:0ba6
ls /dev/ | grep -i usb
ttyUSB0
usb
Banana Pie
sudo lsusb
Bus 002 Device 006: ID 413c:2110 Dell Computer Corp. Dell Wired Multimedia Keyboard
Bus 002 Device 005: ID 1a86:7523 QinHeng Electronics CH340 serial converter
Bus 002 Device 004: ID 413c:1010 Dell Computer Corp. USB 2.0 Hub [MTT]
Bus 002 Device 003: ID 05c6:f00e Qualcomm, Inc. Android
Bus 002 Device 002: ID 0a05:7211 Unknown Manufacturer hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
sudo lsusb -t -v
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci-platform/1p, 12M
ID 1d6b:0001 Linux Foundation 1.1 root hub
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 12M
ID 0a05:7211 Unknown Manufacturer hub
|__ Port 2: Dev 3, If 0, Class=Wireless, Driver=rndis_host, 12M
ID 05c6:f00e Qualcomm, Inc.
|__ Port 2: Dev 3, If 1, Class=CDC Data, Driver=rndis_host, 12M
ID 05c6:f00e Qualcomm, Inc.
|__ Port 4: Dev 4, If 0, Class=Hub, Driver=hub/4p, 12M
ID 413c:1010 Dell Computer Corp.
|__ Port 4: Dev 6, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
ID 413c:2110 Dell Computer Corp.
|__ Port 4: Dev 6, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
ID 413c:2110 Dell Computer Corp.
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci-platform/1p, 480M
ID 1d6b:0002 Linux Foundation 2.0 root hub
ls /dev/ | grep -i usb
usb
Looks like low power: armbian-hardware-monitor.log
[ 4.212594] hub 2-1.4:1.0: USB hub found
[ 4.214421] hub 2-1.4:1.0: 4 ports detected
[ 4.524151] usb 2-1.4.1: new full-speed USB device number 5 using ohci-platform
[ 4.640474] usb 2-1.4.1: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice=81.33
[ 4.640518] usb 2-1.4.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 4.640533] usb 2-1.4.1: Product: USB Serial
[ 4.641133] usb 2-1.4.1: rejected 1 configuration due to insufficient available bus power