laning

thanks

My environment is ManjaroLinux, x86 with docker installed on the system, I want to build the system for orangepizero3 via Arbian/build, I chose the CSC version, but there is an error during the build process, here is the log file:log How should I this problem? Thanks.

NanoPC-T4 only has 16GRAM, which is still a bit small for daily use. So I want to put u-boot on emmc or sd card, and install the system on nvme solid state drive. If I want to realize this function, can the armbian-config tool help me realize it quickly? Or do I need to set u-boot parameters and compile by myself, thus installing the system in nvme SSD?

You are right. I'm a beginner and recently learned what DTS does. I think if I want to operate in a new version of the kernel system, I need to configure the kernel compilation file to make it work properly.

I found a workaround: install an older version of the kernel Armbian system, for example kernel version 4.4. But why it works this way, I don't know. So can someone tell me why?

https://wiki.friendlyelec.com/wiki/index.php/NanoPC-T4#Fan_speed_setting This is the official reference document for NanoPC-T4.

I bought a NanoPC-T4 development board designed by friendlyelec and installed the Armbian operating system. But the heat generated by the Rk3399 main control chip is too high. I bought an official PWM fan. According to the official wiki, the fan can work normally. However, under the same configuration under Armbian, the fan can’t work normally, so I What work needs to be done? Thanks.