Jump to content

yo8aiv

Members
  • Posts

    2
  • Joined

  • Last visited

  1. Hello, has anyone an image that works ? .. can anyone provide a link.? interested only on uart's usbs and sd-card. I actually managed using tutorial provided above by ls819011 to make a bootable image .. usig latest Armbian 23.8 Bookworm Kernel 6.2.y, and Armbian_23.5.1_Orangepiplus2e_bookworm_current_6.1.30_minimal.img to extract boot loader .. but functionality is affected ..usb aren't detected and also uart's arent working. Thanks. in advance, Regards.
  2. http://paste.armbian.com/icedujiguw.yaml Hello everyone, trying to give new life to this old Orange Pi+ 2. Here is described what hapens when i try to boot up latest image. Can anyone help. Thanks in advance. Armbian 23.8 Bookworm Kernel 6.2.y, Size: 421Mb, Release date: Jun 3, 2023 SBC gets stuck after the request Sense .. and doesnt booy up, if i plug a device in usb ports, it bootloops .. see below using same sd-card and a diffrent image file works with no issues . hardware : grounded out pin 9 of the SD card slot (checked with multimeter and works) U-Boot SPL 2022.07-armbian (Jun 03 2023 - 19:37:25 +0000) DRAM: 2048 MiB Trying to boot from MMC1 U-Boot 2022.07-armbian (Jun 03 2023 - 19:37:25 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Plus / Plus 2 DRAM: 2 GiB Core: 65 devices, 18 uclasses, devicetree: separate WDT: Not starting watchdog@1c20ca0 MMC: mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1 Loading Environment from FAT... Unable to use mmc 0:1... In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Net: phy interface9 eth0: ethernet@1c30000 starting USB... Bus usb@1c1b000: USB EHCI 1.00 Bus usb@1c1d000: USB EHCI 1.00 scanning bus usb@1c1b000 for devices... EHCI timed out on TD - token=0x80008c80 unable to get device descriptor (error=-1) 2 USB Device(s) found scanning bus usb@1c1d000 for devices... Device NOT ready Request Sense returned 02 3A 00 SBC gets stuck after the request Sense .. and doesnt booy up, if i plug a device in usb ports, it bootloops .. see below U-Boot SPL 2022.07-armbian (Jun 03 2023 - 19:37:25 +0000) DRAM: 2048 MiB Trying to boot from MMC1 U-Boot 2022.07-armbian (Jun 03 2023 - 19:37:25 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Plus / Plus 2 DRAM: 2 GiB Core: 65 devices, 18 uclasses, devicetree: separate WDT: Not starting watchdog@1c20ca0 MMC: mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1 Loading Environment from FAT... Unable to use mmc 0:1... In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Net: phy interface9 eth0: ethernet@1c30000 starting USB... Bus usb@1c1b000: USB EHCI 1.00 Bus usb@1c1d000: USB EHCI 1.00 scanning bus usb@1c1b000 for devices... Device NOT ready Request Sense returned 02 3A 00 undefined instruction pc : [<bbf93980>] lr : [<bffa3391>] reloc pc : [<4600b980>] lr : [<4a01b391>] sp : bbf5e848 ip : 0000001c fp : bffde94a r10: bffe5c00 r9 : bbf67ec0 r8 : 00000000 r7 : 00000000 r6 : bbf93b18 r5 : a0000000 r4 : bbf93b80 r3 : bbf93980 r2 : 00000000 r1 : 00000000 r0 : bbf93b80 Flags: NzCv IRQs off FIQs off Mode SVC_32 Code: bbf68cc8 00000000 00000000 00000000 (ffffffff) Resetting CPU ... resetting ... U-Boot SPL 2022.07-armbian (Jun 03 2023 - 19:37:25 +0000) DRAM: 2048 MiB Trying to boot from MMC1
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines