joaopaulo98

unfortunately I don't have another SD card. I'm using a Chinese display, LCD TFT 1.8" 128x160 - Driver ST7735

Hi @Gunjan Gupta thanks for replying. So, to get my lcd working the kernel must be bellow 5.3, according this doc https://github.com/notro/fbtft/wiki

Hi everyone. FIrst of all, i need to thank this community, you need to be congratulated for the effort you all make to this project. When i restart my router, the wlan0 of my opi zero 2 stops, no network with "nmcli dev wifi" appears. I've already tried restarting the service with "sudo systemctl restart NetworkManager", disable IPv6 and also installing latest armbian-firmware-full.deb, but it still the same. I'm only able to resolve it with a reboot. Previously I used Debian and this did not happen. I'm using this linux version (4.9.318-legacy-sun50iw9) because of compatibility with the SPI LCD TFT display that I'm using. From what I researched here on the forum, this seems to be related to drivers, but I didn't find the solution (if it exists for the version I'm using). Normally I would try another version, but I am unable to remove the SD card from the opi at the moment (the LCD is glued to the front of it), I would like to solve this just through the terminal. I will leave the armbianmonitor log below. thanks. Network/firewall problem detected. Trying fallback... Network/firewall problem detected. Not able to upload debug info. 1 2 ### Activated 1 lzo zram swap devices with 482MB each. 3 ### Activated Armbian ramlog partition with lz4 compression 4 5 Mon Sep 25 10:14:12 AM -03 2023 | Orange Pi Zero2 | 23.8.1 | arm64 | aarch64 | 4.9.318-legacy-sun50iw9 6 7 ### dmesg: 8 9 [ 0.000000] Booting Linux on physical CPU 0x0 10 [ 0.000000] Linux version 4.9.318-legacy-sun50iw9 (armbian@next) (gcc version 11.4.0 (Ubuntu 11.4.0-1ubuntu1~22.04) ) #1 SMP PREEMPT Tue May 17 02:06:13 UTC 2022 11 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] 12 [ 0.000000] disp reserve base 0x7bf4fcc0 ,size 0x384000 13 [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 14 [ 0.000000] On node 0 totalpages: 262144 15 [ 0.000000] DMA zone: 4096 pages used for memmap 16 [ 0.000000] DMA zone: 0 pages reserved 17 [ 0.000000] DMA zone: 262144 pages, LIFO batch:31 18 [ 0.000000] psci: probing for conduit method from DT. 19 [ 0.000000] psci: PSCIv1.0 detected in firmware. 20 [ 0.000000] psci: Using standard PSCI v0.2 function IDs 21 [ 0.000000] psci: Trusted OS migration not required 22 [ 0.000000] psci: SMC Calling Convention v1.0 23 [ 0.000000] percpu: Embedded 21 pages/cpu s45592 r8192 d32232 u86016 24 [ 0.000000] pcpu-alloc: s45592 r8192 d32232 u86016 alloc=21*4096 25 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 26 [ 0.000000] Detected VIPT I-cache on CPU0 27 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 28 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258048 29 [ 0.000000] Kernel command line: root=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e rootwait rootfstype=ext4 splash=verbose console=ttyS0,115200 consoleblank=0 loglevel=1 ubootpart=68ea14b7-01 disp_reserve=3686400,0x7bf4fcc0 fbcon=map:1 30 [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes 31 [ 0.000000] log_buf_len total cpu_extra contributions: 393216 bytes 32 [ 0.000000] log_buf_len min size: 131072 bytes 33 [ 0.000000] log_buf_len: 524288 bytes 34 [ 0.000000] early log buf free: 129352(98%) 35 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) 36 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) 37 [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) 38 [ 0.000000] Memory: 952408K/1048576K available (11902K kernel code, 1476K rwdata, 6668K rodata, 3008K init, 674K bss, 79784K reserved, 16384K cma-reserved) 39 [ 0.000000] Virtual kernel memory layout: 40 [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) 41 [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) 42 [ 0.000000] .text : 0xffffff8008208000 - 0xffffff8008da8000 ( 11904 KB) 43 [ 0.000000] .rodata : 0xffffff8008da8000 - 0xffffff8009438000 ( 6720 KB) 44 [ 0.000000] .init : 0xffffff8009438000 - 0xffffff8009728000 ( 3008 KB) 45 [ 0.000000] .data : 0xffffff8009728000 - 0xffffff8009899008 ( 1477 KB) 46 [ 0.000000] .bss : 0xffffff8009899008 - 0xffffff8009941b94 ( 675 KB) 47 [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) 48 [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) 49 [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) 50 [ 0.000000] 0xffffffbf00000000 - 0xffffffbf01000000 ( 16 MB actual) 51 [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB) 52 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 53 [ 0.000000] Preemptible hierarchical RCU implementation. 54 [ 0.000000] Build-time adjustment of leaf fanout to 64. 55 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 56 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns 57 [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt). 58 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 59 [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 60 [ 0.000225] Console: colour dummy device 80x25 61 [ 0.000240] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) 62 [ 0.000249] pid_max: default: 32768 minimum: 301 63 [ 0.000446] Security Framework initialized 64 [ 0.000454] AppArmor: AppArmor disabled by boot time parameter 65 [ 0.000568] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) 66 [ 0.000573] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) 67 [ 0.001841] sched-energy: CPU device node has no sched-energy-costs 68 [ 0.001855] Invalid sched_group_energy for CPU0 69 [ 0.001863] CPU0: update cpu_capacity 1024 70 [ 0.008981] ASID allocator initialised with 32768 entries 71 [ 0.027980] BOOTEVENT: 27.964624: ON 72 [ 0.055930] Detected VIPT I-cache on CPU1 73 [ 0.055983] Invalid sched_group_energy for CPU1 74 [ 0.055987] CPU1: update cpu_capacity 1024 75 [ 0.055990] CPU1: Booted secondary processor [410fd034] 76 [ 0.079320] Detected VIPT I-cache on CPU2 77 [ 0.079359] Invalid sched_group_energy for CPU2 78 [ 0.079363] CPU2: update cpu_capacity 1024 79 [ 0.079366] CPU2: Booted secondary processor [410fd034] 80 [ 0.102723] Detected VIPT I-cache on CPU3 81 [ 0.102756] Invalid sched_group_energy for CPU3 82 [ 0.102759] CPU3: update cpu_capacity 1024 83 [ 0.102762] CPU3: Booted secondary processor [410fd034] 84 [ 0.102849] Brought up 4 CPUs 85 [ 0.102857] SMP: Total of 4 processors activated. 86 [ 0.102865] CPU features: detected feature: 32-bit EL0 Support 87 [ 0.102871] CPU features: detected feature: Kernel page table isolation (KPTI) 88 [ 0.106635] CPU: All CPU(s) started at EL1 89 [ 0.106656] alternatives: patching kernel code 90 [ 0.106835] Invalid sched_group_energy for CPU3 91 [ 0.106844] CPU3: update max cpu_capacity 1024 92 [ 0.106850] Invalid sched_group_energy for Cluster3 93 [ 0.106855] Invalid sched_group_energy for CPU2 94 [ 0.106860] Invalid sched_group_energy for Cluster2 95 [ 0.106865] Invalid sched_group_energy for CPU1 96 [ 0.106871] Invalid sched_group_energy for Cluster1 97 [ 0.106876] Invalid sched_group_energy for CPU0 98 [ 0.106881] Invalid sched_group_energy for Cluster0 99 [ 0.108304] devtmpfs: initialized 100 [ 0.112733] CPU1: update max cpu_capacity 1024 101 [ 0.143456] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns 102 [ 0.143481] futex hash table entries: 1024 (order: 5, 131072 bytes) 103 [ 0.144142] xor: measuring software checksum speed 104 [ 0.176262] 8regs : 1933.200 MB/sec 105 [ 0.209641] 8regs_prefetch: 1720.800 MB/sec 106 [ 0.243028] 32regs : 2287.200 MB/sec 107 [ 0.276415] 32regs_prefetch: 1996.800 MB/sec 108 [ 0.276421] xor: using function: 32regs (2287.200 MB/sec) 109 [ 0.276480] atomic64_test: passed 110 [ 0.276486] pinctrl core: initialized pinctrl subsystem 111 [ 0.277668] NET: Registered protocol family 16 112 [ 0.278918] dump_class_init,861, success 113 [ 0.293134] cpuidle: using governor menu 114 [ 0.294564] sunxi iommu: irq = 8 115 [ 0.294891] vdso: 2 pages (1 code @ ffffff8008daf000, 1 data @ ffffff800972c000) 116 [ 0.294909] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. 117 [ 0.296309] DMA: preallocated 256 KiB pool for atomic allocations 118 [ 0.297693] sun50iw9p1-r-pinctrl r_pio: initialized sunXi PIO driver 119 [ 0.312065] sun50iw9p1-pinctrl pio: initialized sunXi PIO driver 120 [ 0.316111] iommu: Adding device 1c0e000.ve to group 0 121 [ 0.316665] iommu: Adding device 1c00000.vp9 to group 0 122 [ 0.328265] iommu: Adding device 1000000.disp to group 0 123 [ 0.329691] iommu: Adding device 1480000.g2d to group 0 124 [ 0.332912] iommu: Adding device csi0 to group 0 125 [ 0.333397] iommu: Adding device csi1 to group 0 126 [ 0.334620] iommu: Adding device 6600800.vind:scaler@0 to group 0 127 [ 0.334913] iommu: Adding device 6600800.vind:scaler@1 to group 0 128 [ 0.335223] iommu: Adding device 6600800.vind:scaler@2 to group 0 129 [ 0.335532] iommu: Adding device 6600800.vind:scaler@3 to group 0 130 [ 0.335833] iommu: Adding device 6600800.vind:scaler@4 to group 0 131 [ 0.336129] iommu: Adding device 6600800.vind:scaler@5 to group 0 132 [ 0.337214] iommu: Adding device vinc0 to group 0 133 [ 0.337719] iommu: Adding device vinc1 to group 0 134 [ 0.339189] iommu: Adding device 1420000.deinterlace to group 0 135 [ 0.381216] HugeTLB registered 2 MB page size, pre-allocated 0 pages 136 [ 0.437337] raid6: int64x1 gen() 391 MB/s 137 [ 0.494101] raid6: int64x1 xor() 362 MB/s 138 [ 0.550863] raid6: int64x2 gen() 591 MB/s 139 [ 0.607537] raid6: int64x2 xor() 513 MB/s 140 [ 0.664318] raid6: int64x4 gen() 840 MB/s 141 [ 0.721054] raid6: int64x4 xor() 629 MB/s 142 [ 0.777759] raid6: int64x8 gen() 964 MB/s 143 [ 0.834536] raid6: int64x8 xor() 655 MB/s 144 [ 0.891292] raid6: neonx1 gen() 648 MB/s 145 [ 0.948026] raid6: neonx1 xor() 641 MB/s 146 [ 1.004736] raid6: neonx2 gen() 975 MB/s 147 [ 1.061478] raid6: neonx2 xor() 819 MB/s 148 [ 1.118260] raid6: neonx4 gen() 1287 MB/s 149 [ 1.174969] raid6: neonx4 xor() 965 MB/s 150 [ 1.231719] raid6: neonx8 gen() 1323 MB/s 151 [ 1.288451] raid6: neonx8 xor() 991 MB/s 152 [ 1.288456] raid6: using algorithm neonx8 gen() 1323 MB/s 153 [ 1.288461] raid6: .... xor() 991 MB/s, rmw enabled 154 [ 1.288467] raid6: using intx1 recovery algorithm 155 [ 1.288648] pwm module init! 156 [ 1.292943] sunxi-pm debug v3.10 157 [ 1.294038] SCSI subsystem initialized 158 [ 1.294659] sunxi_spi_probe()2299 - [spi0] SPI MASTER MODE 159 [ 1.294743] sunxi_spi_request_gpio()1927 - [spi0] Pinctrl init spi0 160 [ 1.294863] sunxi_spi_clk_init()1977 - [spi0] mclk 100000000 161 [ 1.295349] spi spi0: master is unqueued, this is deprecated 162 [ 1.295659] sunxi_spi_probe()2379 - [spi0]: driver probe succeed, base ffffff8008066000, irq 294 163 [ 1.296234] sunxi_spi_probe()2299 - [spi1] SPI MASTER MODE 164 [ 1.296315] sunxi_spi_request_gpio()1927 - [spi1] Pinctrl init spi1 165 [ 1.296427] sunxi_spi_clk_init()1977 - [spi1] mclk 100000000 166 [ 1.296879] spi spi1: master is unqueued, this is deprecated 167 [ 1.297185] sunxi_spi_probe()2379 - [spi1]: driver probe succeed, base ffffff8008068000, irq 295 168 [ 1.297961] usbcore: registered new interface driver usbfs 169 [ 1.298051] usbcore: registered new interface driver hub 170 [ 1.298124] usbcore: registered new device driver usb 171 [ 1.298366] sunxi_i2c_adap_init()2522 - init 172 [ 1.298955] sunxi_i2c_probe()2208 - [i2c3] warning: failed to get regulator id 173 [ 1.299050] sunxi_i2c_probe()2270 - [i2c3] twi_drv_used = 0 174 [ 1.299057] sunxi_i2c_probe()2274 - [i2c3] twi_pkt_interval = 0 175 [ 1.299073] twi3 supply twi not found, using dummy regulator 176 [ 1.299150] twi_request_gpio()451 - [i2c3] init name: twi3 177 [ 1.299897] sunxi_i2c_probe()2208 - [i2c5] warning: failed to get regulator id 178 [ 1.299975] sunxi_i2c_probe()2270 - [i2c5] twi_drv_used = 0 179 [ 1.299983] sunxi_i2c_probe()2274 - [i2c5] twi_pkt_interval = 0 180 [ 1.299996] twi5 supply twi not found, using dummy regulator 181 [ 1.300097] twi_request_gpio()451 - [i2c5] init name: twi5 182 [ 1.300584] axp20x-i2c 5-0036: AXP20x variant AXP806 found 183 [ 1.319272] random: fast init done 184 [ 1.330453] axp20x-i2c 5-0036: AXP20X driver loaded 185 [ 1.330939] media: Linux media interface: v0.10 186 [ 1.331023] Linux video capture interface: v2.00 187 [ 1.331851] Advanced Linux Sound Architecture Driver Initialized. 188 [ 1.332584] Bluetooth: Core ver 2.22 189 [ 1.332657] NET: Registered protocol family 31 190 [ 1.332663] Bluetooth: HCI device and connection manager initialized 191 [ 1.332681] Bluetooth: HCI socket layer initialized 192 [ 1.332694] Bluetooth: L2CAP socket layer initialized 193 [ 1.332733] Bluetooth: SCO socket layer initialized 194 [ 1.333495] [DISP]disp_module_init 195 [ 1.334685] [DISP] parser_disp_init_para,line:1403: 196 [ 1.334694] of_property_read fb0_width fail 197 [ 1.334707] [DISP] disp_init,line:2215: 198 [ 1.334713] smooth display screen:0 type:4 mode:10 199 [ 1.352233] [DISP]disp_module_init finish 200 [ 1.353103] clocksource: Switched to clocksource arch_sys_counter 201 [ 1.353356] VFS: Disk quotas dquot_6.6.0 202 [ 1.353442] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 203 [ 1.354182] Console: switching to colour frame buffer device 240x67 204 [ 1.397407] NET: Registered protocol family 2 205 [ 1.397529] IP idents hash table entries: 16384 (order: 5, 131072 bytes) 206 [ 1.416697] TCP established hash table entries: 8192 (order: 4, 65536 bytes) 207 [ 1.416772] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) 208 [ 1.416896] TCP: Hash tables configured (established 8192 bind 8192) 209 [ 1.416987] UDP hash table entries: 512 (order: 2, 16384 bytes) 210 [ 1.417016] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) 211 [ 1.417337] NET: Registered protocol family 1 212 [ 1.417940] RPC: Registered named UNIX socket transport module. 213 [ 1.417945] RPC: Registered udp transport module. 214 [ 1.417948] RPC: Registered tcp transport module. 215 [ 1.417951] RPC: Registered tcp NFSv4.1 backchannel transport module. 216 [ 1.418220] Trying to unpack rootfs image as initramfs... 217 [ 2.172617] Freeing initrd memory: 17256K 218 [ 2.173741] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available 219 [ 2.177671] audit: initializing netlink subsys (disabled) 220 [ 2.177758] audit: type=2000 audit(2.173:1): initialized 221 [ 2.178699] workingset: timestamp_bits=45 max_order=18 bucket_order=0 222 [ 2.189823] DLM installed 223 [ 2.191628] squashfs: version 4.0 (2009/01/31) Phillip Lougher 224 [ 2.191964] Registering sdcardfs 0.1 225 [ 2.192434] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 226 [ 2.194120] ntfs: driver 2.1.32 [Flags: R/W]. 227 [ 2.200780] NET: Registered protocol family 38 228 [ 2.201137] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) 229 [ 2.201276] io scheduler noop registered 230 [ 2.201285] io scheduler deadline registered 231 [ 2.201454] io scheduler cfq registered (default) 232 [ 2.203658] failed to get easy_light_used assign 233 [ 2.203667] failed to get normal led pin assign 234 [ 2.203673] failed to get standby led pin assign 235 [ 2.203678] failed to get standby led pin assign 236 [ 2.203683] these is zero number for gpio 237 [ 2.203688] gpio_init finish with uesd 238 [ 2.206901] uart uart0: get regulator failed 239 [ 2.207102] uart0: ttyS0 at MMIO 0x5000000 (irq = 280, base_baud = 1500000) is a SUNXI 240 [ 2.207125] sw_console_setup()1706 - console setup baud 115200 parity n bits 8, flow n 241 [ 2.207219] console [ttyS0] enabled 242 [ 2.208029] uart uart1: get regulator failed 243 [ 2.208216] uart1: ttyS1 at MMIO 0x5000400 (irq = 281, base_baud = 1500000) is a SUNXI 244 [ 2.208918] uart uart5: get regulator failed 245 [ 2.209103] uart5: ttyS5 at MMIO 0x5001400 (irq = 282, base_baud = 1500000) is a SUNXI 246 [ 2.210433] misc dump reg init 247 [ 2.211574] deinterlace 1420000.deinterlace: version[1.0.0], ip=0x300100 248 [ 2.211910] Unable to detect cache hierarchy for CPU 0 249 [ 2.225936] brd: module loaded 250 [ 2.234300] loop: module loaded 251 [ 2.234492] [NAND][NE] Not found valid nand node on dts 252 [ 2.235082] Get boot type cmd line fail 253 [ 2.235668] sunxi-bt soc@03000000:bt: Missing bt_power. 254 [ 2.235679] sunxi-bt soc@03000000:bt: bt_power_name ((null)) 255 [ 2.235686] sunxi-bt soc@03000000:bt: Missing bt_io_regulator. 256 [ 2.235693] sunxi-bt soc@03000000:bt: io_regulator_name ((null)) 257 [ 2.235748] sunxi-bt soc@03000000:bt: bt_rst gpio=211 mul-sel=1 pull=-1 drv_level=-1 data=0 258 [ 2.235825] sunxi-bt soc@03000000:bt: devm_pinctrl_get() failed! 259 [ 2.236724] sunxi-wlan soc@03000000:wlan: wlan_busnum (1) 260 [ 2.236736] sunxi-wlan soc@03000000:wlan: Missing wlan_power. 261 [ 2.236743] sunxi-wlan soc@03000000:wlan: wlan_power_name ((null)) 262 [ 2.236751] sunxi-wlan soc@03000000:wlan: Missing wlan_io_regulator. 263 [ 2.236758] sunxi-wlan soc@03000000:wlan: io_regulator_name ((null)) 264 [ 2.236790] sunxi-wlan soc@03000000:wlan: wlan_regon gpio=210 mul-sel=1 pull=-1 drv_level=-1 data=0 265 [ 2.236824] sunxi-wlan soc@03000000:wlan: get gpio chip_en failed 266 [ 2.236832] sunxi-wlan soc@03000000:wlan: get gpio power_en failed 267 [ 2.236850] sunxi-wlan soc@03000000:wlan: wlan_hostwake gpio=207 mul-sel=6 pull=-1 drv_level=-1 data=0 268 [ 2.237822] [ADDR_MGT] addr_mgt_probe: success. 269 [ 2.244731] tun: Universal TUN/TAP device driver, 1.6 270 [ 2.244743] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 271 [ 2.246912] gmac-power0: NULL 272 [ 2.246922] gmac-power1: NULL 273 [ 2.246928] gmac-power2: NULL 274 [ 2.247873] PPP generic driver version 2.4.2 275 [ 2.248154] PPP BSD Compression module registered 276 [ 2.248165] PPP Deflate Compression module registered 277 [ 2.248191] PPP MPPE Compression module registered 278 [ 2.248199] NET: Registered protocol family 24 279 [ 2.248232] PPTP driver version 0.8.5 280 [ 2.248602] usbcore: registered new interface driver r8152 281 [ 2.248676] usbcore: registered new interface driver asix 282 [ 2.248773] usbcore: registered new interface driver ax88179_178a 283 [ 2.248840] usbcore: registered new interface driver cdc_ether 284 [ 2.248903] usbcore: registered new interface driver net1080 285 [ 2.248970] usbcore: registered new interface driver cdc_subset 286 [ 2.249034] usbcore: registered new interface driver zaurus 287 [ 2.249123] usbcore: registered new interface driver cdc_ncm 288 [ 2.249130] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 289 [ 2.249487] get drv_vbus is fail, 84 290 [ 2.249497] get ehci0-controller, regulator_io is no nocare 291 [ 2.249813] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffff800992ac30, 0x:ffffff80081c1000, irq_no:11e 292 [ 2.249819] [sunxi-ehci0]: Not init ehci0 293 [ 2.249954] get ehci1-controller, regulator_io is no nocare 294 [ 2.250171] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xffffff800992a8e8, 0x:ffffff80081c5000, irq_no:120 295 [ 2.250230] sunxi-ehci 5200000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 296 [ 2.250258] sunxi-ehci 5200000.ehci1-controller: new USB bus registered, assigned bus number 1 297 [ 2.250976] sunxi-ehci 5200000.ehci1-controller: irq 288, io mem 0xffffff80081c5000 298 [ 2.266480] sunxi-ehci 5200000.ehci1-controller: USB 0.0 started, EHCI 1.00 299 [ 2.266873] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 300 [ 2.266883] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 301 [ 2.266890] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 302 [ 2.266898] usb usb1: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 303 [ 2.266904] usb usb1: SerialNumber: sunxi-ehci 304 [ 2.267826] hub 1-0:1.0: USB hub found 305 [ 2.267882] hub 1-0:1.0: 1 port detected 306 [ 2.268635] get drv_vbus is fail, 84 307 [ 2.268642] get ehci2-controller, regulator_io is no nocare 308 [ 2.268884] [sunxi-ehci2]: probe, pdev->name: 5310000.ehci2-controller, sunxi_ehci: 0xffffff800992a5a0, 0x:ffffff80081cf000, irq_no:122 309 [ 2.268936] sunxi-ehci 5310000.ehci2-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 310 [ 2.268962] sunxi-ehci 5310000.ehci2-controller: new USB bus registered, assigned bus number 2 311 [ 2.269313] sunxi-ehci 5310000.ehci2-controller: irq 290, io mem 0xffffff80081cf000 312 [ 2.279797] sunxi-ehci 5310000.ehci2-controller: USB 0.0 started, EHCI 1.00 313 [ 2.280032] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 314 [ 2.280041] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 315 [ 2.280049] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 316 [ 2.280056] usb usb2: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 317 [ 2.280062] usb usb2: SerialNumber: sunxi-ehci 318 [ 2.280928] hub 2-0:1.0: USB hub found 319 [ 2.280977] hub 2-0:1.0: 1 port detected 320 [ 2.281647] get drv_vbus is fail, 84 321 [ 2.281655] get ehci3-controller, regulator_io is no nocare 322 [ 2.281903] [sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffff800992a258, 0x:ffffff80081d9000, irq_no:124 323 [ 2.281955] sunxi-ehci 5311000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 324 [ 2.281979] sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 3 325 [ 2.282294] sunxi-ehci 5311000.ehci3-controller: irq 292, io mem 0xffffff80081d9000 326 [ 2.296448] sunxi-ehci 5311000.ehci3-controller: USB 0.0 started, EHCI 1.00 327 [ 2.296651] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 328 [ 2.296659] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 329 [ 2.296667] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 330 [ 2.296674] usb usb3: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 331 [ 2.296681] usb usb3: SerialNumber: sunxi-ehci 332 [ 2.297536] hub 3-0:1.0: USB hub found 333 [ 2.297581] hub 3-0:1.0: 1 port detected 334 [ 2.298516] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 335 [ 2.298886] get drv_vbus is fail, 84 336 [ 2.298894] get ohci0-controller, regulator_io is no nocare 337 [ 2.299227] [sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffff800992b950 338 [ 2.299232] [sunxi-ohci0]: Not init ohci0 339 [ 2.299350] get ohci1-controller, regulator_io is no nocare 340 [ 2.299509] hci: request ohci1-controller gpio:80 341 [ 2.299586] [sunxi-ohci1]: probe, pdev->name: 5200000.ohci1-controller, sunxi_ohci: 0xffffff800992b608 342 [ 2.299637] sunxi-ohci 5200000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 343 [ 2.299662] sunxi-ohci 5200000.ohci1-controller: new USB bus registered, assigned bus number 4 344 [ 2.299740] sunxi-ohci 5200000.ohci1-controller: irq 289, io mem 0x00000000 345 [ 2.360641] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 346 [ 2.360652] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 347 [ 2.360659] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 348 [ 2.360666] usb usb4: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 349 [ 2.360673] usb usb4: SerialNumber: sunxi-ohci 350 [ 2.361541] hub 4-0:1.0: USB hub found 351 [ 2.361587] hub 4-0:1.0: 1 port detected 352 [ 2.362260] get drv_vbus is fail, 84 353 [ 2.362267] get ohci2-controller, regulator_io is no nocare 354 [ 2.362601] [sunxi-ohci2]: probe, pdev->name: 5310000.ohci2-controller, sunxi_ohci: 0xffffff800992b2c0 355 [ 2.362650] sunxi-ohci 5310000.ohci2-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 356 [ 2.362676] sunxi-ohci 5310000.ohci2-controller: new USB bus registered, assigned bus number 5 357 [ 2.362753] sunxi-ohci 5310000.ohci2-controller: irq 291, io mem 0x00000000 358 [ 2.420614] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 359 [ 2.420625] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 360 [ 2.420632] usb usb5: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 361 [ 2.420640] usb usb5: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 362 [ 2.420646] usb usb5: SerialNumber: sunxi-ohci 363 [ 2.421525] hub 5-0:1.0: USB hub found 364 [ 2.421575] hub 5-0:1.0: 1 port detected 365 [ 2.422259] get drv_vbus is fail, 84 366 [ 2.422267] get ohci3-controller, regulator_io is no nocare 367 [ 2.422597] [sunxi-ohci3]: probe, pdev->name: 5311000.ohci3-controller, sunxi_ohci: 0xffffff800992af78 368 [ 2.422646] sunxi-ohci 5311000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 369 [ 2.422671] sunxi-ohci 5311000.ohci3-controller: new USB bus registered, assigned bus number 6 370 [ 2.422754] sunxi-ohci 5311000.ohci3-controller: irq 293, io mem 0x00000000 371 [ 2.480615] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 372 [ 2.480625] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 373 [ 2.480632] usb usb6: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 374 [ 2.480640] usb usb6: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 375 [ 2.480646] usb usb6: SerialNumber: sunxi-ohci 376 [ 2.481502] hub 6-0:1.0: USB hub found 377 [ 2.481548] hub 6-0:1.0: 1 port detected 378 [ 2.482475] ohci-platform: OHCI generic platform driver 379 [ 2.483238] usbcore: registered new interface driver uas 380 [ 2.483411] usbcore: registered new interface driver usb-storage 381 [ 2.483521] usbcore: registered new interface driver ums-alauda 382 [ 2.483597] usbcore: registered new interface driver ums-cypress 383 [ 2.483666] usbcore: registered new interface driver ums-datafab 384 [ 2.483735] usbcore: registered new interface driver ums_eneub6250 385 [ 2.483806] usbcore: registered new interface driver ums-freecom 386 [ 2.483879] usbcore: registered new interface driver ums-isd200 387 [ 2.483950] usbcore: registered new interface driver ums-jumpshot 388 [ 2.484023] usbcore: registered new interface driver ums-karma 389 [ 2.484101] usbcore: registered new interface driver ums-onetouch 390 [ 2.484197] usbcore: registered new interface driver ums-realtek 391 [ 2.484276] usbcore: registered new interface driver ums-sddr09 392 [ 2.484349] usbcore: registered new interface driver ums-sddr55 393 [ 2.484422] usbcore: registered new interface driver ums-usbat 394 [ 2.484569] usb_serial_number:20080411 395 [ 2.485793] input: sunxi-keyboard as /devices/virtual/input/input0 396 [ 2.486377] usbcore: registered new interface driver xpad 397 [ 2.486522] usbcore: registered new interface driver usb_acecad 398 [ 2.486622] usbcore: registered new interface driver aiptek 399 [ 2.486706] usbcore: registered new interface driver gtco 400 [ 2.486783] usbcore: registered new interface driver hanwang 401 [ 2.486864] usbcore: registered new interface driver kbtab 402 [ 2.487331] axp2101_pek: axp2101-pek can not register without irq 403 [ 2.487354] axp2101-pek: probe of axp2101-pek.0 failed with error -22 404 [ 2.488835] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0 405 [ 2.488902] sunxi-rtc rtc: RTC enabled 406 [ 2.489377] i2c /dev entries driver 407 [ 2.490183] lirc_dev: IR Remote Control driver registered, major 244 408 [ 2.490195] IR NEC protocol handler initialized 409 [ 2.490202] IR RC5(x/sz) protocol handler initialized 410 [ 2.490207] IR RC6 protocol handler initialized 411 [ 2.490213] IR JVC protocol handler initialized 412 [ 2.490218] IR Sony protocol handler initialized 413 [ 2.490224] IR SANYO protocol handler initialized 414 [ 2.490230] IR Sharp protocol handler initialized 415 [ 2.490236] IR MCE Keyboard/mouse protocol handler initialized 416 [ 2.490242] IR LIRC bridge handler initialized 417 [ 2.490247] IR XMP protocol handler initialized 418 [ 2.490771] sunxi_ir_startup: get ir protocol failed 419 [ 2.490814] 7040000.s_cir supply ir0 not found, using dummy regulator 420 [ 2.491018] Registered IR keymap rc_map_sunxi 421 [ 2.491417] input: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0/input1 422 [ 2.491650] rc rc0: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0 423 [ 2.492626] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input2 424 [ 2.493253] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-rc-recv) registered at minor = 0 425 [ 2.493950] sunxi cedar version 0.1 426 [ 2.494148] VE: install start!!! 427 428 [ 2.494344] cedar_ve: cedar-ve the get irq is 278 429 [ 2.494969] VE: get debugfs_mpp_root is NULL, please check mpp 430 431 [ 2.494982] VE: sunxi ve debug register driver failed! 432 433 [ 2.498225] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) 434 [ 2.499513] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com 435 [ 2.499874] Bluetooth: HCI UART driver ver 2.3 436 [ 2.499886] Bluetooth: HCI UART protocol H4 registered 437 [ 2.499892] Bluetooth: HCI UART protocol LL registered 438 [ 2.499897] Bluetooth: HCI UART protocol Three-wire (H5) registered 439 [ 2.504082] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 440 [ 2.504098] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 441 [ 2.504111] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 442 [ 2.504123] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 443 [ 2.504135] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 444 [ 2.504147] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 445 [ 2.504554] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 446 [ 2.504670] sunxi-mmc sdc0: ***ctl-spec-caps*** 8 447 [ 2.504870] sunxi-mmc sdc0: No vmmc regulator found 448 [ 2.504877] sunxi-mmc sdc0: No vqmmc regulator found 449 [ 2.504884] sunxi-mmc sdc0: No vdmmc regulator found 450 [ 2.504890] sunxi-mmc sdc0: No vd33sw regulator found 451 [ 2.504898] sunxi-mmc sdc0: No vd18sw regulator found 452 [ 2.504904] sunxi-mmc sdc0: No vq33sw regulator found 453 [ 2.504910] sunxi-mmc sdc0: No vq18sw regulator found 454 [ 2.505647] sunxi-mmc sdc0: set host busy 455 [ 2.505745] sunxi-mmc sdc0: Got CD GPIO 456 [ 2.506111] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 457 [ 2.506147] sunxi-mmc sdc0: no vqmmc,Check if there is regulator 458 [ 2.519790] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 459 [ 2.536685] sunxi-mmc sdc0: detmode:gpio irq 460 [ 2.536715] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 461 [ 2.539215] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 462 [ 2.540562] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 463 [ 2.540680] sunxi-mmc sdc1: ***ctl-spec-caps*** 8 464 [ 2.540821] sunxi-mmc sdc1: No vmmc regulator found 465 [ 2.540828] sunxi-mmc sdc1: No vqmmc regulator found 466 [ 2.540834] sunxi-mmc sdc1: No vdmmc regulator found 467 [ 2.540840] sunxi-mmc sdc1: No vd33sw regulator found 468 [ 2.540846] sunxi-mmc sdc1: No vd18sw regulator found 469 [ 2.540852] sunxi-mmc sdc1: No vq33sw regulator found 470 [ 2.540859] sunxi-mmc sdc1: No vq18sw regulator found 471 [ 2.541310] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 472 [ 2.542581] sunxi-mmc sdc1: set host busy 473 [ 2.542659] mmc:failed to get gpios 474 [ 2.543780] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 475 [ 2.545044] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 476 [ 2.559846] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 477 [ 2.568166] mmc0: host does not support reading read-only switch, assuming write-enable 478 [ 2.570079] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 479 [ 2.570163] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 480 [ 2.570517] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B 481 [ 2.570613] mmc0: new high speed SDXC card at address 0001 482 [ 2.571691] mmcblk0: mmc0:0001 SD16G 59.5 GiB 483 [ 2.573317] mmcblk0: p1 484 [ 2.576495] sunxi-mmc sdc1: detmode:manually by software 485 [ 2.578689] ledtrig-cpu: registered to indicate activity on CPUs 486 [ 2.579410] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 487 [ 2.580261] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 488 [ 2.580294] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 489 [ 2.582800] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 490 [ 2.584727] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 491 [ 2.585563] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 492 [ 2.586402] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 493 [ 2.586714] sunxi_emce_hw_init()368Unable to get pclk, return fffffffe 494 [ 2.586722] sunxi_emce_probe()590emce hw init failed! 495 [ 2.586749] emce: probe of emce failed with error -2 496 [ 2.587041] hidraw: raw HID events driver (C) Jiri Kosina 497 [ 2.587291] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 498 [ 2.587328] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B 499 [ 2.591817] usbcore: registered new interface driver usbhid 500 [ 2.591824] usbhid: USB HID core driver 501 [ 2.593303] optee: probing for conduit method from DT. 502 [ 2.593319] optee: api uid mismatch 503 [ 2.593917] usbcore: registered new interface driver snd-usb-audio 504 [ 2.595507] [sunxi_hdmi_codec_init] driver and deivce register finished. 505 [ 2.597254] [sunxi_internal_codec_probe]:get audio avcc failed 506 [ 2.597292] [sunxi_internal_codec_probe]:get audio vcc3v3-audio failed 507 [ 2.597527] lineout_vol:26, linein_gain:3, fmin_gain:3, digital_vol:0, adcdrc_cfg:0, adchpf_cfg:0, dacdrc_cfg:0, dachpf_cfg:0, ramp_func_used:1, pa_msleep_time:100, pa_ctl_level:1, gpio-spk:0 508 [ 2.600081] sunxi-codec-machine sndcodec: sun50iw9-codec <-> cpudai mapping ok 509 [ 2.602045] sndhdmi sndhdmi: ASoC: CPU DAI (null) not registered 510 [ 2.602059] sndhdmi sndhdmi: snd_soc_register_card() failed: -517 511 [ 2.604441] sunxi-ahub-cpudai 5097000.cpudai3-controller: ahub cpudai id invalid 512 [ 2.604466] sunxi-ahub-cpudai: probe of 5097000.cpudai3-controller failed with error -22 513 [ 2.608609] sndahub sndahub: sunxi-ahub-aif1 <-> 5097000.cpudai0-controller mapping ok 514 [ 2.610037] sndahub sndahub: sunxi-ahub-aif2 <-> 5097000.cpudai1-controller mapping ok 515 [ 2.611906] sndahub sndahub: sunxi-ahub-aif3 <-> 5097000.cpudai2-controller mapping ok 516 [ 2.615014] pktgen: Packet Generator for packet performance testing. Version: 2.75 517 [ 2.615450] u32 classifier 518 [ 2.615456] Actions configured 519 [ 2.615469] Netfilter messages via NETLINK v0.30. 520 [ 2.615497] nfnl_acct: registering with nfnetlink. 521 [ 2.615834] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) 522 [ 2.616081] ctnetlink v0.93: registering with nfnetlink. 523 [ 2.616896] xt_time: kernel timezone is -0000 524 [ 2.616922] IPVS: Registered protocols (TCP, UDP) 525 [ 2.617030] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) 526 [ 2.617156] IPVS: Creating netns size=1928 id=0 527 [ 2.617288] IPVS: ipvs loaded. 528 [ 2.617296] IPVS: [rr] scheduler registered. 529 [ 2.617394] ipip: IPv4 and MPLS over IPv4 tunneling driver 530 [ 2.618098] gre: GRE over IPv4 demultiplexor driver 531 [ 2.618107] ip_gre: GRE over IPv4 tunneling driver 532 [ 2.619384] IPv4 over IPsec tunneling driver 533 [ 2.620321] ip_tables: (C) 2000-2006 Netfilter Core Team 534 [ 2.620601] arp_tables: arp_tables: (C) 2002 David S. Miller 535 [ 2.620666] Initializing XFRM netlink socket 536 [ 2.620699] IPsec XFRM device driver 537 [ 2.621546] NET: Registered protocol family 10 538 [ 2.623459] mip6: Mobile IPv6 539 [ 2.623498] ip6_tables: (C) 2000-2006 Netfilter Core Team 540 [ 2.624821] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver 541 [ 2.626490] NET: Registered protocol family 17 542 [ 2.626534] NET: Registered protocol family 15 543 [ 2.626691] Bridge firewalling registered 544 [ 2.626840] Bluetooth: RFCOMM TTY layer initialized 545 [ 2.626857] Bluetooth: RFCOMM socket layer initialized 546 [ 2.626892] Bluetooth: RFCOMM ver 1.11 547 [ 2.626906] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 548 [ 2.626911] Bluetooth: BNEP filters: protocol multicast 549 [ 2.626925] Bluetooth: BNEP socket layer initialized 550 [ 2.626930] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 551 [ 2.626942] Bluetooth: HIDP socket layer initialized 552 [ 2.627033] l2tp_core: L2TP core driver, V2.0 553 [ 2.627049] l2tp_ppp: PPPoL2TP kernel driver, V2.0 554 [ 2.627055] 8021q: 802.1Q VLAN Support v1.8 555 [ 2.627255] sctp: Hash tables configured (bind 256/256) 556 [ 2.627867] Key type dns_resolver registered 557 [ 2.628009] Registered cp15_barrier emulation handler 558 [ 2.628022] Registered setend emulation handler 559 [ 2.628972] registered taskstats version 1 560 [ 2.640511] zswap: default zpool zbud not available 561 [ 2.640519] zswap: pool creation failed 562 [ 2.643399] Btrfs loaded, crc32c=crc32c-arm64-hw 563 [ 2.644156] HDMI 2.0 driver init start! 564 [ 2.644170] boot_hdmi=true 565 [ 2.644969] Can not find the node of esm 566 [ 2.644987] ERROR: pinctrl_get for HDMI2.0 DDC fail 567 [ 2.645072] Get hdmi_power0:vcc-hdmi 568 [ 2.645111] 6000000.hdmi supply vcc-hdmi not found, using dummy regulator 569 [ 2.645293] Get hdmi_power1:vdd-hdmi 570 [ 2.645315] 6000000.hdmi supply vdd-hdmi not found, using dummy regulator 571 [ 2.646873] hdmi_cec_init 572 [ 2.647368] [DISP] disp_device_attached,line:146: 573 [ 2.647377] attached ok, mgr0<-->device0, type=4 574 [ 2.647387] [HDMI receive params]: tv mode: 0xa format:0x0 data bits:0x0 eotf:0x0 cs:0x0 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8 575 [ 2.647400] [DISP] disp_hdmi_set_mode,line:648: 576 [ 2.647404] hdmi_set_mode is null! 577 [ 2.650107] HDMI2.0 module init end 578 [ 2.661230] sunxi-thermal 5070400.thermal_sensor: avcc is not calibrated 579 [ 2.664683] cpu cpu1: opp_list_debug_create_link: Failed to create link 580 [ 2.664695] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12) 581 [ 2.664726] cpu cpu2: opp_list_debug_create_link: Failed to create link 582 [ 2.664734] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12) 583 [ 2.664765] cpu cpu3: opp_list_debug_create_link: Failed to create link 584 [ 2.664772] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12) 585 [ 2.667109] sndhdmi sndhdmi: audiohdmi-dai <-> sunxi-ahub-cpu-aif1 mapping ok 586 [ 2.668077] get det_vbus is fail, 84 587 [ 2.668085] get id is fail, 84 588 [ 2.668561] sunxi-rtc rtc: setting system clock to 2023-09-25 13:13:54 UTC (1695647634) 589 [ 2.672307] ALSA device list: 590 [ 2.672316] #0: audiocodec 591 [ 2.672320] #1: sndahub 592 [ 2.672323] #2: sndhdmi 593 [ 2.674011] Freeing unused kernel memory: 3008K 594 [ 2.719116] random: systemd-udevd: uninitialized urandom read (16 bytes read) 595 [ 2.721130] random: systemd-udevd: uninitialized urandom read (16 bytes read) 596 [ 2.724240] random: systemd-udevd: uninitialized urandom read (16 bytes read) 597 [ 2.782715] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device connect 598 [ 2.943236] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device disconnect 599 [ 3.053189] HDMI cable is connected 600 [ 3.293196] usb 4-1: new full-speed USB device number 2 using sunxi-ohci 601 [ 3.513560] usb 4-1: New USB device found, idVendor=24ae, idProduct=2013 602 [ 3.513569] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 603 [ 3.513574] usb 4-1: Product: Rapoo 2.4G Wireless Device 604 [ 3.513579] usb 4-1: Manufacturer: RAPOO 605 [ 3.521487] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.0/0003:24AE:2013.0001/input/input3 606 [ 3.522059] hid-generic 0003:24AE:2013.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input0 607 [ 3.528252] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.1/0003:24AE:2013.0002/input/input4 608 [ 3.583846] hid-generic 0003:24AE:2013.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input1 609 [ 3.587814] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.2/0003:24AE:2013.0003/input/input5 610 [ 3.645175] hid-generic 0003:24AE:2013.0003: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input2 611 [ 4.175658] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) 612 [ 5.121341] cgroup: cgroup2: unknown option "nsdelegate,memory_recursiveprot" 613 [ 5.121897] cgroup: cgroup2: unknown option "nsdelegate" 614 [ 5.142231] systemd[1]: systemd 252.12-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) 615 [ 5.142255] systemd[1]: Detected architecture arm64. 616 [ 5.143380] systemd[1]: Warning! Reported kernel version 4.9.318-legacy-sun50iw9 is older than systemd's required baseline kernel version 4.15. Your mileage may vary. 617 [ 5.160788] systemd[1]: Hostname set to <opi>. 618 [ 5.187977] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation 619 [ 6.664171] (sd-execut[1456]: /usr/lib/systemd/system-generators/netplan failed with exit status 1. 620 [ 6.826549] 621 insmod_device_driver 622 623 [ 6.826799] device_chose finished 124! 624 [ 7.152531] systemd[1]: /lib/systemd/system/hdmi-audio.service:10: Support for option SysVStartPriority= has been removed and it is ignored 625 [ 7.390712] systemd[1]: Queued start job for default target graphical.target. 626 [ 7.398290] systemd[1]: Created slice system-getty.slice - Slice /system/getty. 627 [ 7.400498] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. 628 [ 7.402728] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. 629 [ 7.404079] systemd[1]: Created slice user.slice - User and Session Slice. 630 [ 7.404752] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. 631 [ 7.405299] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 632 [ 7.405628] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. 633 [ 7.406181] systemd[1]: Reached target slices.target - Slice Units. 634 [ 7.406565] systemd[1]: Reached target swap.target - Swaps. 635 [ 7.406884] systemd[1]: Reached target time-set.target - System Time Set. 636 [ 7.407367] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. 637 [ 7.424824] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket. 638 [ 7.425902] systemd[1]: Listening on syslog.socket - Syslog Socket. 639 [ 7.426952] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. 640 [ 7.427666] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. 641 [ 7.429270] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. 642 [ 7.430281] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). 643 [ 7.431365] systemd[1]: Listening on systemd-journald.socket - Journal Socket. 644 [ 7.433565] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. 645 [ 7.434470] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. 646 [ 7.438424] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... 647 [ 7.442972] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... 648 [ 7.447838] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... 649 [ 7.449095] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 650 [ 7.450145] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). 651 [ 7.458224] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... 652 [ 7.463640] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... 653 [ 7.469588] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... 654 [ 7.476065] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... 655 [ 7.483720] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 656 [ 7.493753] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... 657 [ 7.505609] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 658 [ 7.513699] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... 659 [ 7.521780] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 660 [ 7.523557] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). 661 [ 7.533427] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... 662 [ 7.539615] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... 663 [ 7.545233] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... 664 [ 7.555354] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. 665 [ 7.557708] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. 666 [ 7.560723] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. 667 [ 7.563680] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. 668 [ 7.567220] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. 669 [ 7.570740] systemd[1]: modprobe@configfs.service: Deactivated successfully. 670 [ 7.571596] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. 671 [ 7.574513] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 672 [ 7.575328] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 673 [ 7.575934] fuse init (API version 7.26) 674 [ 7.578913] systemd[1]: modprobe@drm.service: Deactivated successfully. 675 [ 7.579585] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. 676 [ 7.584245] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 677 [ 7.603909] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 678 [ 7.607255] systemd[1]: modprobe@fuse.service: Deactivated successfully. 679 [ 7.608402] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. 680 [ 7.609083] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro 681 [ 7.627682] systemd[1]: modprobe@loop.service: Deactivated successfully. 682 [ 7.632223] fbtft: module is from the staging directory, the quality is unknown, you have been warned. 683 [ 7.643261] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned. 684 [ 7.644042] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 685 [ 7.644053] spidev spi1.1: dh2228fv spi1.1 16777kHz 8 bits mode=0x00 686 [ 7.644258] spidev spi1.1: Deleting spi1.1 687 [ 7.644866] fbtft_device: GPIOS used by 'fb_st7735r': 688 [ 7.644872] fbtft_device: 'reset' = GPIO73 689 [ 7.644876] fbtft_device: 'dc' = GPIO70 690 [ 7.644887] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 691 [ 7.644893] spi spi1.1: fb_st7735r spi1.1 16000kHz 8 bits mode=0x00 692 [ 7.677124] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 693 [ 7.692328] WCN: marlin_init entry! 694 [ 7.693743] WCN: marlin_parse_dt reset gpio=211 695 [ 7.693754] WCN_ERR: gpio reset request err: 211 696 [ 7.693760] WCN: wcn config bt wake host 697 [ 7.694287] WCN: marlin_registsr_bt_wake bt_hostwake gpio=208 mul-sel=6 pull=-1 drv_level=-1 data=0 intnum=193 698 [ 7.694462] WCN: wcn config wifi wake host 699 [ 7.694483] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 700 [ 7.697753] sdiohal:sdiohal_init ok 701 [ 7.698681] WCN: marlin_probe ok! 702 [ 7.707661] mtty_probe init device addr: 0xffffffc009743700 703 [ 7.707871] -->rfkill_bluetooth_init 704 [ 7.708097] <--rfkill_bluetooth_init 705 [ 7.737223] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. 706 [ 7.745823] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... 707 [ 7.754294] WCN: start_marlin [MARLIN_WIFI] 708 [ 7.754310] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 709 [ 7.754313] WCN: the first power on start 710 [ 7.767251] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... 711 [ 7.767919] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 712 [ 7.779068] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... 713 [ 7.780247] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 714 [ 7.787054] systemd[1]: Starting systemd-sysusers.service - Create System Users... 715 [ 7.803925] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. 716 [ 7.806506] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. 717 [ 7.808844] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. 718 [ 7.857375] systemd[1]: Finished systemd-sysusers.service - Create System Users. 719 [ 7.863816] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... 720 [ 7.869863] WCN: marlin chip en pull up 721 [ 7.896530] sdiohal:sdiohal_scan_card 722 [ 7.896550] sunxi-wlan soc@03000000:wlan: bus_index: 1 723 [ 7.896603] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 724 [ 7.913180] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 725 [ 7.933965] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 726 [ 7.934818] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 727 [ 7.934866] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 728 [ 7.937397] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 729 [ 7.940513] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 730 [ 7.956522] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 731 [ 7.962872] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. 732 [ 7.964962] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. 733 [ 7.967564] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B 734 [ 7.968346] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 735 [ 7.968438] sunxi-mmc sdc1: sdc set ios:clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 736 [ 7.969151] mmc1: new ultra high speed SDR104 SDIO card at address 8800 737 [ 7.969623] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=150000000 738 [ 7.969916] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 739 [ 7.969939] WCN: marlin_scan_finish! 740 [ 7.969944] sdiohal:probe ok 741 [ 7.970002] sdiohal:scan end! 742 [ 7.970010] WCN: then marlin start to download 743 [ 7.970035] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! 744 [ 7.970722] systemd[1]: Mounting tmp.mount - /tmp... 745 [ 7.976973] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... 746 [ 7.996649] systemd[1]: Mounted tmp.mount - /tmp. 747 [ 7.998972] systemd[1]: Reached target local-fs.target - Local File Systems. 748 [ 8.004304] systemd[1]: Starting armbian-led-state.service - Armbian leds state... 749 [ 8.010521] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config... 750 [ 8.016247] systemd[1]: Starting console-setup.service - Set console font and keymap... 751 [ 8.022617] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data... 752 [ 8.035416] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 753 [ 8.041679] systemd[1]: Starting ufw.service - Uncomplicated firewall... 754 [ 8.044570] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices. 755 [ 8.079969] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown... 756 [ 8.089589] systemd[1]: Starting systemd-udev-settle.service - Wait for udev To Complete Device Initialization... 757 [ 8.094069] systemd[1]: Finished console-setup.service - Set console font and keymap. 758 [ 8.099049] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data. 759 [ 8.102140] systemd[1]: Received SIGRTMIN+20 from PID 1419 (plymouthd). 760 [ 8.106775] systemd[1]: Finished ufw.service - Uncomplicated firewall. 761 [ 8.109875] systemd[1]: Reached target network-pre.target - Preparation for Network. 762 [ 8.120853] WCN: combin_img 0 marlin_firmware_write finish and successful 763 [ 8.121037] WCN: marlin_start_run read reset reg val:0x1 764 [ 8.121041] WCN: after do marlin_start_run reset reg val:0x0 765 [ 8.121252] WCN: s_marlin_bootup_time=8121247426 766 [ 8.126767] WCN: clock mode: TSX 767 [ 8.126963] WCN: marlin_write_cali_data sync init_state:0x1a0f50 768 [ 8.153464] WCN: marlin_write_cali_data sync init_state:0x1a0f50 769 [ 8.180042] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1 770 [ 8.180049] WCN: sdio_config bt_wake_host trigger:[high] 771 [ 8.180053] WCN: sdio_config irq:[inband] 772 [ 8.180056] WCN: sdio_config wl_wake_host trigger:[high] 773 [ 8.180060] WCN: sdio_config wake_host_level_duration_time:[20ms] 774 [ 8.180063] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse] 775 [ 8.180068] WCN: marlin_send_sdio_config_to_cp sdio_config:0xb8f01 (enable config) 776 [ 8.180420] WCN: marlin_write_cali_data finish 777 [ 8.180599] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 778 [ 8.184298] systemd[1]: Finished ifupdown-pre.service - Helper to synchronize boot up for ifupdown. 779 [ 8.186570] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 780 [ 8.187145] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 781 [ 8.187683] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 782 [ 8.206808] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 783 [ 8.230273] systemd[1]: Finished armbian-led-state.service - Armbian leds state. 784 [ 8.233417] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 785 [ 8.260159] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 786 [ 8.286681] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 787 [ 8.313421] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0 788 [ 8.313431] WCN: marlin_bind_verify confuse data: 0x8badefa1b12bbe26aeffa8d1a5c07 789 [ 8.313451] WCN: marlin_bind_verify verify data: 0xccd7f963c19581907680f88f2044f687 790 [ 8.313993] WCN: check_cp_ready sync val:0xf0f0f0f7, prj_type val:0x0 791 [ 8.340033] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0 792 [ 8.340041] sdiohal:sdiohal_runtime_get entry 793 [ 8.340206] WCN: get_cp2_version entry! 794 [ 8.342041] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~ 795 [ 8.342164] WCN: switch_cp2_log - close entry! 796 [ 8.343330] WCN: WCND at cmd read:OK 797 [ 8.343500] WCN: then marlin download finished and run ok 798 [ 8.343507] WCN: start_loopcheck 799 [ 8.358103] WCN: get_board_ant_num [one_ant] 800 [ 8.358115] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini 801 [ 8.419895] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings. 802 [ 8.425761] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. 803 [ 8.432774] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... 804 [ 8.478091] zram: Added device: zram0 805 [ 8.479072] zram: Added device: zram1 806 [ 8.480095] zram: Added device: zram2 807 [ 8.515448] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. 808 [ 8.516740] zswap: can't enable, initialization failed 809 [ 8.523294] systemd[1]: Starting networking.service - Raise network interfaces... 810 [ 8.550425] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files. 811 [ 8.575402] systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen... 812 [ 8.583681] zram0: detected capacity change from 0 to 506396672 813 [ 8.643939] fb_st7735r: module is from the staging directory, the quality is unknown, you have been warned. 814 [ 8.684828] systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen. 815 [ 8.687032] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 816 [ 8.688075] systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch. 817 [ 8.690095] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. 818 [ 9.171003] systemd[1]: Finished networking.service - Raise network interfaces. 819 [ 9.972783] graphics fb1: fb_st7735r frame buffer, 160x128, 40 KiB video memory, 4 KiB buffer memory, fps=20, spi1.1 at 16 MHz 820 [ 10.065081] systemd[1]: Found device dev-ttyS0.device - /dev/ttyS0. 821 [ 10.280879] systemd[1]: Reached target usb-gadget.target - Hardware activated USB gadget. 822 [ 10.699203] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch. 823 [ 10.709665] systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status... 824 [ 10.771758] sunxi-bt soc@03000000:bt: set block: 0 825 [ 10.791280] bluetooth_set_power: start_block=0 826 [ 10.791289] WCN: start_marlin [MARLIN_BLUETOOTH] 827 [ 10.791298] WCN: marlin power state:4, subsys: [MARLIN_BLUETOOTH] power 1 828 [ 10.791302] WCN: marlin have open, GNSS is closed 829 [ 10.791308] bluetooth_set_power: end_block=0 830 [ 10.801157] systemd[1]: Started systemd-rfkill.service - Load/Save RF Kill Switch Status. 831 [ 11.015993] systemd[1]: Finished systemd-udev-settle.service - Wait for udev To Complete Device Initialization. 832 [ 11.035604] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 833 [ 11.035729] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 834 [ 11.036178] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 835 [ 11.052983] systemd[1]: Starting brltty.service - Braille Device Support... 836 [ 11.058965] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 837 [ 11.065165] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 838 [ 11.071992] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 839 [ 11.078964] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 840 [ 11.088671] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 841 [ 11.089344] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 842 [ 11.092894] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 843 [ 11.093819] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 844 [ 11.096164] systemd[1]: modprobe@loop.service: Deactivated successfully. 845 [ 11.096864] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 846 [ 11.098548] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 847 [ 11.098734] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 848 [ 11.150318] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 849 [ 11.150966] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 850 [ 11.151697] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 851 [ 11.624444] Adding 494524k swap on /dev/zram0. Priority:5 extents:1 across:494524k SSFS 852 [ 11.768801] zram1: detected capacity change from 0 to 52428800 853 [ 11.824933] systemd[1]: Started brltty.service - Braille Device Support. 854 [ 11.844101] input: BRLTTY 6.5 Linux Screen Driver Keyboard as /devices/virtual/input/input6 855 [ 15.812101] systemd[1]: systemd-rfkill.service: Deactivated successfully. 856 [ 15.870180] systemd[1]: Finished armbian-zram-config.service - Armbian ZRAM config. 857 [ 15.876418] systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging... 858 [ 15.938006] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard 859 [ 19.478345] systemd[1]: Finished armbian-ramlog.service - Armbian memory supported logging. 860 [ 19.484761] systemd[1]: Starting systemd-journald.service - Journal Service... 861 [ 19.754529] systemd-journald[1924]: Data hash table of /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal has a fill level at 75.2 (1658 of 2204 items, 1269760 file size, 765 bytes per hash table item), suggesting rotation. 862 [ 19.754550] systemd-journald[1924]: /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal: Journal header limits reached or header out-of-date, rotating. 863 [ 19.761899] systemd[1]: Started systemd-journald.service - Journal Service. 864 [ 19.808239] systemd-journald[1924]: Received client request to flush runtime journal. 865 [ 20.043035] IPVS: Creating netns size=1928 id=1 866 867 ### armbian-release: 868 869 # PLEASE DO NOT EDIT THIS FILE 870 BOARD=orangepizero2 871 BOARD_NAME="Orange Pi Zero2" 872 BOARDFAMILY=sun50iw9 873 BUILD_REPOSITORY_URL=https://github.com/armbian/build 874 BUILD_REPOSITORY_COMMIT=ac829eb6 875 LINUXFAMILY=sun50iw9 876 ARCH=arm64 877 IMAGE_TYPE=stable 878 BOARD_TYPE=conf 879 INITRD_ARCH=arm 880 KERNEL_IMAGE_TYPE=Image 881 FORCE_BOOTSCRIPT_UPDATE=yes 882 VENDOR=Armbian 883 BOOTSCRIPT_FORCE_UPDATE="yes" 884 BOOTSCRIPT_DST="boot.cmd" 885 VERSION=23.8.1 886 REVISION=23.8.1 887 BRANCH=legacy 888 889 ### boot environment: 890 891 verbosity=1 892 console=serial 893 #disp_mode=1080p60 894 #fb0_width=1280 895 #fb0_height=720 896 rootdev=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e 897 rootfstype=ext4 898 overlays=spi-spidev 899 param_spidev_spi_bus=1 900 param_spidev_spi_cs=1 901 extraargs=fbcon=map:1 902 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u 903 904 ### lsusb: 905 906 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 907 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 908 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 909 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 910 Bus 004 Device 002: ID 24ae:2013 Shenzhen Rapoo Technology Co., Ltd. Rapoo 2.4G Wireless Device 911 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 912 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 913 914 ### lscpu: 915 916 Architecture: aarch64 917 CPU op-mode(s): 32-bit, 64-bit 918 Byte Order: Little Endian 919 CPU(s): 4 920 On-line CPU(s) list: 0-3 921 Vendor ID: ARM 922 Model name: Cortex-A53 923 Model: 4 924 Thread(s) per core: 1 925 Core(s) per cluster: 4 926 Socket(s): - 927 Cluster(s): 1 928 Stepping: r0p4 929 CPU(s) scaling MHz: 100% 930 CPU max MHz: 1512.0000 931 CPU min MHz: 480.0000 932 BogoMIPS: 48.00 933 Flags: fp asimd aes pmull sha1 sha2 crc32 934 935 ### cpuinfo: 936 937 processor : 0 938 BogoMIPS : 48.00 939 Features : fp asimd aes pmull sha1 sha2 crc32 940 CPU implementer : 0x41 941 CPU architecture: 8 942 CPU variant : 0x0 943 CPU part : 0xd03 944 CPU revision : 4 945 946 processor : 1 947 BogoMIPS : 48.00 948 Features : fp asimd aes pmull sha1 sha2 crc32 949 CPU implementer : 0x41 950 CPU architecture: 8 951 CPU variant : 0x0 952 CPU part : 0xd03 953 CPU revision : 4 954 955 processor : 2 956 BogoMIPS : 48.00 957 Features : fp asimd aes pmull sha1 sha2 crc32 958 CPU implementer : 0x41 959 CPU architecture: 8 960 CPU variant : 0x0 961 CPU part : 0xd03 962 CPU revision : 4 963 964 processor : 3 965 BogoMIPS : 48.00 966 Features : fp asimd aes pmull sha1 sha2 crc32 967 CPU implementer : 0x41 968 CPU architecture: 8 969 CPU variant : 0x0 970 CPU part : 0xd03 971 CPU revision : 4 972 973 974 ### meminfo: 975 976 MemTotal: 989056 kB 977 MemFree: 798616 kB 978 MemAvailable: 885636 kB 979 Buffers: 15588 kB 980 Cached: 78536 kB 981 SwapCached: 0 kB 982 Active: 65408 kB 983 Inactive: 49780 kB 984 Active(anon): 21248 kB 985 Inactive(anon): 656 kB 986 Active(file): 44160 kB 987 Inactive(file): 49124 kB 988 Unevictable: 0 kB 989 Mlocked: 0 kB 990 SwapTotal: 494524 kB 991 SwapFree: 494524 kB 992 Dirty: 2748 kB 993 Writeback: 0 kB 994 AnonPages: 21120 kB 995 Mapped: 24344 kB 996 Shmem: 828 kB 997 Slab: 32928 kB 998 SReclaimable: 9116 kB 999 SUnreclaim: 23812 kB 1000 KernelStack: 2560 kB 1001 PageTables: 1056 kB 1002 NFS_Unstable: 0 kB 1003 Bounce: 0 kB 1004 WritebackTmp: 0 kB 1005 CommitLimit: 989052 kB 1006 Committed_AS: 79260 kB 1007 VmallocTotal: 263061440 kB 1008 VmallocUsed: 0 kB 1009 VmallocChunk: 0 kB 1010 CmaTotal: 16384 kB 1011 CmaFree: 7468 kB 1012 HugePages_Total: 0 1013 HugePages_Free: 0 1014 HugePages_Rsvd: 0 1015 HugePages_Surp: 0 1016 Hugepagesize: 2048 kB 1017 1018 ### virtual memory: 1019 1020 vm.admin_reserve_kbytes = 8192 1021 vm.block_dump = 0 1022 vm.compact_unevictable_allowed = 1 1023 vm.dirty_background_bytes = 0 1024 vm.dirty_background_ratio = 10 1025 vm.dirty_bytes = 0 1026 vm.dirty_expire_centisecs = 3000 1027 vm.dirty_ratio = 20 1028 vm.dirtytime_expire_seconds = 43200 1029 vm.dirty_writeback_centisecs = 500 1030 vm.extfrag_threshold = 500 1031 vm.extra_free_kbytes = 0 1032 vm.hugepages_treat_as_movable = 0 1033 vm.hugetlb_shm_group = 0 1034 vm.laptop_mode = 0 1035 vm.legacy_va_layout = 0 1036 vm.lowmem_reserve_ratio = 256 32 1037 vm.max_map_count = 65530 1038 vm.min_free_kbytes = 3937 1039 vm.mmap_min_addr = 4096 1040 vm.mmap_rnd_bits = 18 1041 vm.mmap_rnd_compat_bits = 11 1042 vm.nr_hugepages = 0 1043 vm.nr_overcommit_hugepages = 0 1044 vm.nr_pdflush_threads = 0 1045 vm.oom_dump_tasks = 1 1046 vm.oom_kill_allocating_task = 0 1047 vm.overcommit_kbytes = 0 1048 vm.overcommit_memory = 0 1049 vm.overcommit_ratio = 50 1050 vm.page-cluster = 0 1051 vm.panic_on_oom = 0 1052 vm.percpu_pagelist_fraction = 0 1053 vm.stat_interval = 1 1054 vm.swappiness = 100 1055 vm.user_reserve_kbytes = 30004 1056 vm.vfs_cache_pressure = 100 1057 vm.watermark_scale_factor = 10 1058 1059 ### ip addr: 1060 1061 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 1062 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 1063 inet XXX.XXX.0.1/8 scope host lo 1064 valid_lft forever preferred_lft forever 1065 inet6 ::1/128 scope host noprefixroute 1066 valid_lft forever preferred_lft forever 1067 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 1068 link/ether a2:f9:75:52:ad:58 brd ff:ff:ff:ff:ff:ff 1069 3: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 1070 link/ether fa:6e:f4:da:68:8c brd ff:ff:ff:ff:ff:ff 1071 4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 1072 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 1073 5: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN group default qlen 1 1074 link/gre XXX.XXX.0.0 brd XXX.XXX.0.0 1075 6: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN group default qlen 1000 1076 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 1077 7: ip_vti0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 1078 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 1079 8: ip6_vti0@NONE: <NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1 1080 link/tunnel6 :: brd :: 1081 9: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 1082 link/sit XXX.XXX.0.0 brd XXX.XXX.0.0 1083 10: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN group default qlen 1 1084 link/tunnel6 :: brd :: 1085 11: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 1086 link/ether 48:c9:27:84:d1:40 brd ff:ff:ff:ff:ff:ff 1087 1088 ### partitions: 1089 1090 major minor #blocks name 1091 1092 179 0 62410752 mmcblk0 1093 179 1 61763584 mmcblk0p1 1094 253 0 494528 zram0 1095 253 1 51200 zram1 1096 1097 ### df: 1098 1099 udev 466M 0 466M 0% /dev 1100 tmpfs 97M 2.1M 95M 3% /run 1101 /dev/mmcblk0p1 58G 5.7G 52G 10% / 1102 tmpfs 483M 0 483M 0% /dev/shm 1103 tmpfs 5.0M 0 5.0M 0% /run/lock 1104 tmpfs 483M 4.0K 483M 1% /tmp 1105 /dev/zram1 47M 2.4M 41M 6% /var/log 1106 1107 ### lsblk: 1108 1109 NAME FSTYPE SIZE MOUNTPOINT UUID 1110 mmcblk0 59.5G 1111 └─mmcblk0p1 ext4 58.9G / 0c85f38a-a16e-49a0-a53c-99d9856e983e 1112 zram1 50M /var/log 1113 zram2 0B 1114 1115 ### zramctl: 1116 1117 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT 1118 /dev/zram1 lz4 50M 2.4M 565.1K 932K 4 /var/log 1119 /dev/zram0 lzo 482.9M 4K 76B 12K 4 [SWAP] 1120 1121 ### mtab: 1122 1123 /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 1124 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 1125 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 1126 1127 ### mmc0:0001 info: 1128 1129 manfid: 0x0000fe 1130 cid: fe3432534431364720000000690091f5 1131 fwrev: 0x0 1132 csd: 400e00325b590001dc277f800a40008b 1133 ocr: 0x00200000 1134 type: SD 1135 date: 01/2009 1136 hwrev: 0x2 1137 dsr: 0x404 1138 serial: 0x00000069 1139 erase_size: 512 1140 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SD16G MODALIAS=mmc:block 1141 ssr: 000000000800000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 1142 scr: 0285808300000000 1143 oemid: 0x3432 1144 preferred_erase_size: 4194304 1145 name: SD16G 1146 1147 ### Boot system health: 1148 1149 Time CPU load %cpu %sys %usr %nice %io %irq Tcpu C.St. 1150 10:14:14 1512 MHz 1.17 39% 19% 13% 0% 6% 0% 50.0 °C 0/5 1151 10:14:14 1512 MHz 1.17 94% 31% 28% 0% 34% 0% 47.9 °C 0/5 1152 10:14:15 1512 MHz 1.17 100% 29% 55% 1% 14% 0% 47.9 °C 0/5 1153 10:14:15 1512 MHz 1.17 99% 32% 59% 1% 6% 0% 50.0 °C 0/5 1154 10:14:15 1512 MHz 1.17 96% 31% 34% 1% 29% 0% 50.0 °C 0/5 1155 1156 ### Activated 1 lzo zram swap devices with 482MB each. 1157 ### Activated Armbian ramlog partition with lz4 compression 1158 1159 Mon Sep 25 11:53:07 AM -03 2023 | Orange Pi Zero2 | 23.8.1 | arm64 | aarch64 | 4.9.318-legacy-sun50iw9 1160 1161 ### dmesg: 1162 1163 [ 0.000000] Booting Linux on physical CPU 0x0 1164 [ 0.000000] Linux version 4.9.318-legacy-sun50iw9 (armbian@next) (gcc version 11.4.0 (Ubuntu 11.4.0-1ubuntu1~22.04) ) #1 SMP PREEMPT Tue May 17 02:06:13 UTC 2022 1165 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] 1166 [ 0.000000] disp reserve base 0x7bf4fcc0 ,size 0x384000 1167 [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 1168 [ 0.000000] On node 0 totalpages: 262144 1169 [ 0.000000] DMA zone: 4096 pages used for memmap 1170 [ 0.000000] DMA zone: 0 pages reserved 1171 [ 0.000000] DMA zone: 262144 pages, LIFO batch:31 1172 [ 0.000000] psci: probing for conduit method from DT. 1173 [ 0.000000] psci: PSCIv1.0 detected in firmware. 1174 [ 0.000000] psci: Using standard PSCI v0.2 function IDs 1175 [ 0.000000] psci: Trusted OS migration not required 1176 [ 0.000000] psci: SMC Calling Convention v1.0 1177 [ 0.000000] percpu: Embedded 21 pages/cpu s45592 r8192 d32232 u86016 1178 [ 0.000000] pcpu-alloc: s45592 r8192 d32232 u86016 alloc=21*4096 1179 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 1180 [ 0.000000] Detected VIPT I-cache on CPU0 1181 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 1182 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258048 1183 [ 0.000000] Kernel command line: root=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e rootwait rootfstype=ext4 splash=verbose console=ttyS0,115200 consoleblank=0 loglevel=1 ubootpart=68ea14b7-01 disp_reserve=3686400,0x7bf4fcc0 fbcon=map:1 1184 [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes 1185 [ 0.000000] log_buf_len total cpu_extra contributions: 393216 bytes 1186 [ 0.000000] log_buf_len min size: 131072 bytes 1187 [ 0.000000] log_buf_len: 524288 bytes 1188 [ 0.000000] early log buf free: 129352(98%) 1189 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) 1190 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) 1191 [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) 1192 [ 0.000000] Memory: 952408K/1048576K available (11902K kernel code, 1476K rwdata, 6668K rodata, 3008K init, 674K bss, 79784K reserved, 16384K cma-reserved) 1193 [ 0.000000] Virtual kernel memory layout: 1194 [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) 1195 [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) 1196 [ 0.000000] .text : 0xffffff8008208000 - 0xffffff8008da8000 ( 11904 KB) 1197 [ 0.000000] .rodata : 0xffffff8008da8000 - 0xffffff8009438000 ( 6720 KB) 1198 [ 0.000000] .init : 0xffffff8009438000 - 0xffffff8009728000 ( 3008 KB) 1199 [ 0.000000] .data : 0xffffff8009728000 - 0xffffff8009899008 ( 1477 KB) 1200 [ 0.000000] .bss : 0xffffff8009899008 - 0xffffff8009941b94 ( 675 KB) 1201 [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) 1202 [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) 1203 [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) 1204 [ 0.000000] 0xffffffbf00000000 - 0xffffffbf01000000 ( 16 MB actual) 1205 [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB) 1206 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 1207 [ 0.000000] Preemptible hierarchical RCU implementation. 1208 [ 0.000000] Build-time adjustment of leaf fanout to 64. 1209 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 1210 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns 1211 [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt). 1212 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 1213 [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 1214 [ 0.000213] Console: colour dummy device 80x25 1215 [ 0.000228] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) 1216 [ 0.000237] pid_max: default: 32768 minimum: 301 1217 [ 0.000434] Security Framework initialized 1218 [ 0.000442] AppArmor: AppArmor disabled by boot time parameter 1219 [ 0.000561] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) 1220 [ 0.000567] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) 1221 [ 0.001842] sched-energy: CPU device node has no sched-energy-costs 1222 [ 0.001857] Invalid sched_group_energy for CPU0 1223 [ 0.001864] CPU0: update cpu_capacity 1024 1224 [ 0.008938] ASID allocator initialised with 32768 entries 1225 [ 0.027948] BOOTEVENT: 27.933457: ON 1226 [ 0.055888] Detected VIPT I-cache on CPU1 1227 [ 0.055944] Invalid sched_group_energy for CPU1 1228 [ 0.055947] CPU1: update cpu_capacity 1024 1229 [ 0.055951] CPU1: Booted secondary processor [410fd034] 1230 [ 0.079275] Detected VIPT I-cache on CPU2 1231 [ 0.079313] Invalid sched_group_energy for CPU2 1232 [ 0.079316] CPU2: update cpu_capacity 1024 1233 [ 0.079319] CPU2: Booted secondary processor [410fd034] 1234 [ 0.102675] Detected VIPT I-cache on CPU3 1235 [ 0.102708] Invalid sched_group_energy for CPU3 1236 [ 0.102711] CPU3: update cpu_capacity 1024 1237 [ 0.102714] CPU3: Booted secondary processor [410fd034] 1238 [ 0.102794] Brought up 4 CPUs 1239 [ 0.102802] SMP: Total of 4 processors activated. 1240 [ 0.102810] CPU features: detected feature: 32-bit EL0 Support 1241 [ 0.102816] CPU features: detected feature: Kernel page table isolation (KPTI) 1242 [ 0.106583] CPU: All CPU(s) started at EL1 1243 [ 0.106605] alternatives: patching kernel code 1244 [ 0.106777] Invalid sched_group_energy for CPU3 1245 [ 0.106787] CPU3: update max cpu_capacity 1024 1246 [ 0.106792] Invalid sched_group_energy for Cluster3 1247 [ 0.106797] Invalid sched_group_energy for CPU2 1248 [ 0.106803] Invalid sched_group_energy for Cluster2 1249 [ 0.106807] Invalid sched_group_energy for CPU1 1250 [ 0.106813] Invalid sched_group_energy for Cluster1 1251 [ 0.106818] Invalid sched_group_energy for CPU0 1252 [ 0.106823] Invalid sched_group_energy for Cluster0 1253 [ 0.108245] devtmpfs: initialized 1254 [ 0.112692] CPU1: update max cpu_capacity 1024 1255 [ 0.143351] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns 1256 [ 0.143380] futex hash table entries: 1024 (order: 5, 131072 bytes) 1257 [ 0.144036] xor: measuring software checksum speed 1258 [ 0.176245] 8regs : 1933.200 MB/sec 1259 [ 0.209624] 8regs_prefetch: 1720.800 MB/sec 1260 [ 0.243010] 32regs : 2287.200 MB/sec 1261 [ 0.276398] 32regs_prefetch: 1935.600 MB/sec 1262 [ 0.276403] xor: using function: 32regs (2287.200 MB/sec) 1263 [ 0.276463] atomic64_test: passed 1264 [ 0.276469] pinctrl core: initialized pinctrl subsystem 1265 [ 0.277635] NET: Registered protocol family 16 1266 [ 0.278886] dump_class_init,861, success 1267 [ 0.296463] cpuidle: using governor menu 1268 [ 0.297922] sunxi iommu: irq = 8 1269 [ 0.298242] vdso: 2 pages (1 code @ ffffff8008daf000, 1 data @ ffffff800972c000) 1270 [ 0.298259] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. 1271 [ 0.299679] DMA: preallocated 256 KiB pool for atomic allocations 1272 [ 0.301067] sun50iw9p1-r-pinctrl r_pio: initialized sunXi PIO driver 1273 [ 0.315448] sun50iw9p1-pinctrl pio: initialized sunXi PIO driver 1274 [ 0.319394] iommu: Adding device 1c0e000.ve to group 0 1275 [ 0.319896] iommu: Adding device 1c00000.vp9 to group 0 1276 [ 0.331325] iommu: Adding device 1000000.disp to group 0 1277 [ 0.332744] iommu: Adding device 1480000.g2d to group 0 1278 [ 0.335961] iommu: Adding device csi0 to group 0 1279 [ 0.336420] iommu: Adding device csi1 to group 0 1280 [ 0.337642] iommu: Adding device 6600800.vind:scaler@0 to group 0 1281 [ 0.337941] iommu: Adding device 6600800.vind:scaler@1 to group 0 1282 [ 0.338242] iommu: Adding device 6600800.vind:scaler@2 to group 0 1283 [ 0.338532] iommu: Adding device 6600800.vind:scaler@3 to group 0 1284 [ 0.338818] iommu: Adding device 6600800.vind:scaler@4 to group 0 1285 [ 0.339122] iommu: Adding device 6600800.vind:scaler@5 to group 0 1286 [ 0.340053] iommu: Adding device vinc0 to group 0 1287 [ 0.340603] iommu: Adding device vinc1 to group 0 1288 [ 0.342058] iommu: Adding device 1420000.deinterlace to group 0 1289 [ 0.384529] HugeTLB registered 2 MB page size, pre-allocated 0 pages 1290 [ 0.440807] raid6: int64x1 gen() 392 MB/s 1291 [ 0.497436] raid6: int64x1 xor() 362 MB/s 1292 [ 0.554273] raid6: int64x2 gen() 591 MB/s 1293 [ 0.611040] raid6: int64x2 xor() 512 MB/s 1294 [ 0.667771] raid6: int64x4 gen() 840 MB/s 1295 [ 0.724552] raid6: int64x4 xor() 629 MB/s 1296 [ 0.781384] raid6: int64x8 gen() 965 MB/s 1297 [ 0.838120] raid6: int64x8 xor() 655 MB/s 1298 [ 0.894922] raid6: neonx1 gen() 648 MB/s 1299 [ 0.951679] raid6: neonx1 xor() 641 MB/s 1300 [ 1.008469] raid6: neonx2 gen() 976 MB/s 1301 [ 1.065251] raid6: neonx2 xor() 819 MB/s 1302 [ 1.122039] raid6: neonx4 gen() 1287 MB/s 1303 [ 1.178809] raid6: neonx4 xor() 966 MB/s 1304 [ 1.235591] raid6: neonx8 gen() 1324 MB/s 1305 [ 1.292359] raid6: neonx8 xor() 991 MB/s 1306 [ 1.292365] raid6: using algorithm neonx8 gen() 1324 MB/s 1307 [ 1.292370] raid6: .... xor() 991 MB/s, rmw enabled 1308 [ 1.292375] raid6: using intx1 recovery algorithm 1309 [ 1.292510] pwm module init! 1310 [ 1.296809] sunxi-pm debug v3.10 1311 [ 1.297909] SCSI subsystem initialized 1312 [ 1.298536] sunxi_spi_probe()2299 - [spi0] SPI MASTER MODE 1313 [ 1.298618] sunxi_spi_request_gpio()1927 - [spi0] Pinctrl init spi0 1314 [ 1.298739] sunxi_spi_clk_init()1977 - [spi0] mclk 100000000 1315 [ 1.299257] spi spi0: master is unqueued, this is deprecated 1316 [ 1.299566] sunxi_spi_probe()2379 - [spi0]: driver probe succeed, base ffffff8008066000, irq 294 1317 [ 1.300133] sunxi_spi_probe()2299 - [spi1] SPI MASTER MODE 1318 [ 1.300213] sunxi_spi_request_gpio()1927 - [spi1] Pinctrl init spi1 1319 [ 1.300329] sunxi_spi_clk_init()1977 - [spi1] mclk 100000000 1320 [ 1.300793] spi spi1: master is unqueued, this is deprecated 1321 [ 1.301098] sunxi_spi_probe()2379 - [spi1]: driver probe succeed, base ffffff8008068000, irq 295 1322 [ 1.301944] usbcore: registered new interface driver usbfs 1323 [ 1.302032] usbcore: registered new interface driver hub 1324 [ 1.302103] usbcore: registered new device driver usb 1325 [ 1.302262] sunxi_i2c_adap_init()2522 - init 1326 [ 1.302818] sunxi_i2c_probe()2208 - [i2c3] warning: failed to get regulator id 1327 [ 1.302909] sunxi_i2c_probe()2270 - [i2c3] twi_drv_used = 0 1328 [ 1.302917] sunxi_i2c_probe()2274 - [i2c3] twi_pkt_interval = 0 1329 [ 1.302932] twi3 supply twi not found, using dummy regulator 1330 [ 1.303008] twi_request_gpio()451 - [i2c3] init name: twi3 1331 [ 1.303783] sunxi_i2c_probe()2208 - [i2c5] warning: failed to get regulator id 1332 [ 1.303866] sunxi_i2c_probe()2270 - [i2c5] twi_drv_used = 0 1333 [ 1.303873] sunxi_i2c_probe()2274 - [i2c5] twi_pkt_interval = 0 1334 [ 1.303887] twi5 supply twi not found, using dummy regulator 1335 [ 1.303965] twi_request_gpio()451 - [i2c5] init name: twi5 1336 [ 1.304443] axp20x-i2c 5-0036: AXP20x variant AXP806 found 1337 [ 1.323141] random: fast init done 1338 [ 1.334361] axp20x-i2c 5-0036: AXP20X driver loaded 1339 [ 1.334857] media: Linux media interface: v0.10 1340 [ 1.334941] Linux video capture interface: v2.00 1341 [ 1.335668] Advanced Linux Sound Architecture Driver Initialized. 1342 [ 1.336426] Bluetooth: Core ver 2.22 1343 [ 1.336493] NET: Registered protocol family 31 1344 [ 1.336499] Bluetooth: HCI device and connection manager initialized 1345 [ 1.336516] Bluetooth: HCI socket layer initialized 1346 [ 1.336528] Bluetooth: L2CAP socket layer initialized 1347 [ 1.336566] Bluetooth: SCO socket layer initialized 1348 [ 1.337339] [DISP]disp_module_init 1349 [ 1.338520] [DISP] parser_disp_init_para,line:1403: 1350 [ 1.338529] of_property_read fb0_width fail 1351 [ 1.338541] [DISP] disp_init,line:2215: 1352 [ 1.338546] smooth display screen:0 type:4 mode:10 1353 [ 1.355947] [DISP]disp_module_init finish 1354 [ 1.356888] clocksource: Switched to clocksource arch_sys_counter 1355 [ 1.357129] VFS: Disk quotas dquot_6.6.0 1356 [ 1.357217] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 1357 [ 1.357965] Console: switching to colour frame buffer device 240x67 1358 [ 1.401241] NET: Registered protocol family 2 1359 [ 1.401365] IP idents hash table entries: 16384 (order: 5, 131072 bytes) 1360 [ 1.417139] TCP established hash table entries: 8192 (order: 4, 65536 bytes) 1361 [ 1.417212] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) 1362 [ 1.417336] TCP: Hash tables configured (established 8192 bind 8192) 1363 [ 1.417423] UDP hash table entries: 512 (order: 2, 16384 bytes) 1364 [ 1.417451] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) 1365 [ 1.417772] NET: Registered protocol family 1 1366 [ 1.418326] RPC: Registered named UNIX socket transport module. 1367 [ 1.418331] RPC: Registered udp transport module. 1368 [ 1.418336] RPC: Registered tcp transport module. 1369 [ 1.418339] RPC: Registered tcp NFSv4.1 backchannel transport module. 1370 [ 1.418579] Trying to unpack rootfs image as initramfs... 1371 [ 2.172813] Freeing initrd memory: 17256K 1372 [ 2.173902] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available 1373 [ 2.177824] audit: initializing netlink subsys (disabled) 1374 [ 2.177911] audit: type=2000 audit(2.173:1): initialized 1375 [ 2.178866] workingset: timestamp_bits=45 max_order=18 bucket_order=0 1376 [ 2.190066] DLM installed 1377 [ 2.191956] squashfs: version 4.0 (2009/01/31) Phillip Lougher 1378 [ 2.192295] Registering sdcardfs 0.1 1379 [ 2.192766] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 1380 [ 2.194332] ntfs: driver 2.1.32 [Flags: R/W]. 1381 [ 2.201080] NET: Registered protocol family 38 1382 [ 2.201448] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) 1383 [ 2.201597] io scheduler noop registered 1384 [ 2.201605] io scheduler deadline registered 1385 [ 2.201769] io scheduler cfq registered (default) 1386 [ 2.203715] failed to get easy_light_used assign 1387 [ 2.203726] failed to get normal led pin assign 1388 [ 2.203731] failed to get standby led pin assign 1389 [ 2.203736] failed to get standby led pin assign 1390 [ 2.203742] these is zero number for gpio 1391 [ 2.203746] gpio_init finish with uesd 1392 [ 2.206782] uart uart0: get regulator failed 1393 [ 2.207027] uart0: ttyS0 at MMIO 0x5000000 (irq = 280, base_baud = 1500000) is a SUNXI 1394 [ 2.207051] sw_console_setup()1706 - console setup baud 115200 parity n bits 8, flow n 1395 [ 2.207127] console [ttyS0] enabled 1396 [ 2.207945] uart uart1: get regulator failed 1397 [ 2.208135] uart1: ttyS1 at MMIO 0x5000400 (irq = 281, base_baud = 1500000) is a SUNXI 1398 [ 2.208892] uart uart5: get regulator failed 1399 [ 2.209082] uart5: ttyS5 at MMIO 0x5001400 (irq = 282, base_baud = 1500000) is a SUNXI 1400 [ 2.210652] misc dump reg init 1401 [ 2.211842] deinterlace 1420000.deinterlace: version[1.0.0], ip=0x300100 1402 [ 2.212179] Unable to detect cache hierarchy for CPU 0 1403 [ 2.226192] brd: module loaded 1404 [ 2.234375] loop: module loaded 1405 [ 2.234564] [NAND][NE] Not found valid nand node on dts 1406 [ 2.235154] Get boot type cmd line fail 1407 [ 2.235732] sunxi-bt soc@03000000:bt: Missing bt_power. 1408 [ 2.235742] sunxi-bt soc@03000000:bt: bt_power_name ((null)) 1409 [ 2.235749] sunxi-bt soc@03000000:bt: Missing bt_io_regulator. 1410 [ 2.235756] sunxi-bt soc@03000000:bt: io_regulator_name ((null)) 1411 [ 2.235812] sunxi-bt soc@03000000:bt: bt_rst gpio=211 mul-sel=1 pull=-1 drv_level=-1 data=0 1412 [ 2.235884] sunxi-bt soc@03000000:bt: devm_pinctrl_get() failed! 1413 [ 2.236710] sunxi-wlan soc@03000000:wlan: wlan_busnum (1) 1414 [ 2.236721] sunxi-wlan soc@03000000:wlan: Missing wlan_power. 1415 [ 2.236728] sunxi-wlan soc@03000000:wlan: wlan_power_name ((null)) 1416 [ 2.236736] sunxi-wlan soc@03000000:wlan: Missing wlan_io_regulator. 1417 [ 2.236743] sunxi-wlan soc@03000000:wlan: io_regulator_name ((null)) 1418 [ 2.236772] sunxi-wlan soc@03000000:wlan: wlan_regon gpio=210 mul-sel=1 pull=-1 drv_level=-1 data=0 1419 [ 2.236806] sunxi-wlan soc@03000000:wlan: get gpio chip_en failed 1420 [ 2.236814] sunxi-wlan soc@03000000:wlan: get gpio power_en failed 1421 [ 2.236832] sunxi-wlan soc@03000000:wlan: wlan_hostwake gpio=207 mul-sel=6 pull=-1 drv_level=-1 data=0 1422 [ 2.237851] [ADDR_MGT] addr_mgt_probe: success. 1423 [ 2.244289] tun: Universal TUN/TAP device driver, 1.6 1424 [ 2.244298] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 1425 [ 2.246294] gmac-power0: NULL 1426 [ 2.246303] gmac-power1: NULL 1427 [ 2.246310] gmac-power2: NULL 1428 [ 2.247346] PPP generic driver version 2.4.2 1429 [ 2.247633] PPP BSD Compression module registered 1430 [ 2.247643] PPP Deflate Compression module registered 1431 [ 2.247670] PPP MPPE Compression module registered 1432 [ 2.247679] NET: Registered protocol family 24 1433 [ 2.247712] PPTP driver version 0.8.5 1434 [ 2.248074] usbcore: registered new interface driver r8152 1435 [ 2.248149] usbcore: registered new interface driver asix 1436 [ 2.248259] usbcore: registered new interface driver ax88179_178a 1437 [ 2.248326] usbcore: registered new interface driver cdc_ether 1438 [ 2.248388] usbcore: registered new interface driver net1080 1439 [ 2.248447] usbcore: registered new interface driver cdc_subset 1440 [ 2.248510] usbcore: registered new interface driver zaurus 1441 [ 2.248604] usbcore: registered new interface driver cdc_ncm 1442 [ 2.248611] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 1443 [ 2.248973] get drv_vbus is fail, 84 1444 [ 2.248982] get ehci0-controller, regulator_io is no nocare 1445 [ 2.249246] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffff800992ac30, 0x:ffffff80081c1000, irq_no:11e 1446 [ 2.249252] [sunxi-ehci0]: Not init ehci0 1447 [ 2.249365] get ehci1-controller, regulator_io is no nocare 1448 [ 2.249538] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xffffff800992a8e8, 0x:ffffff80081c5000, irq_no:120 1449 [ 2.249595] sunxi-ehci 5200000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 1450 [ 2.249622] sunxi-ehci 5200000.ehci1-controller: new USB bus registered, assigned bus number 1 1451 [ 2.250274] sunxi-ehci 5200000.ehci1-controller: irq 288, io mem 0xffffff80081c5000 1452 [ 2.263582] sunxi-ehci 5200000.ehci1-controller: USB 0.0 started, EHCI 1.00 1453 [ 2.263843] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 1454 [ 2.263852] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 1455 [ 2.263860] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 1456 [ 2.263867] usb usb1: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 1457 [ 2.263874] usb usb1: SerialNumber: sunxi-ehci 1458 [ 2.264739] hub 1-0:1.0: USB hub found 1459 [ 2.264787] hub 1-0:1.0: 1 port detected 1460 [ 2.265472] get drv_vbus is fail, 84 1461 [ 2.265480] get ehci2-controller, regulator_io is no nocare 1462 [ 2.265725] [sunxi-ehci2]: probe, pdev->name: 5310000.ehci2-controller, sunxi_ehci: 0xffffff800992a5a0, 0x:ffffff80081cf000, irq_no:122 1463 [ 2.265777] sunxi-ehci 5310000.ehci2-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 1464 [ 2.265802] sunxi-ehci 5310000.ehci2-controller: new USB bus registered, assigned bus number 2 1465 [ 2.266086] sunxi-ehci 5310000.ehci2-controller: irq 290, io mem 0xffffff80081cf000 1466 [ 2.276904] sunxi-ehci 5310000.ehci2-controller: USB 0.0 started, EHCI 1.00 1467 [ 2.277135] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 1468 [ 2.277144] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 1469 [ 2.277152] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 1470 [ 2.277159] usb usb2: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 1471 [ 2.277165] usb usb2: SerialNumber: sunxi-ehci 1472 [ 2.278004] hub 2-0:1.0: USB hub found 1473 [ 2.278047] hub 2-0:1.0: 1 port detected 1474 [ 2.278715] get drv_vbus is fail, 84 1475 [ 2.278723] get ehci3-controller, regulator_io is no nocare 1476 [ 2.278968] [sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffff800992a258, 0x:ffffff80081d9000, irq_no:124 1477 [ 2.279019] sunxi-ehci 5311000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 1478 [ 2.279044] sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 3 1479 [ 2.279340] sunxi-ehci 5311000.ehci3-controller: irq 292, io mem 0xffffff80081d9000 1480 [ 2.290234] sunxi-ehci 5311000.ehci3-controller: USB 0.0 started, EHCI 1.00 1481 [ 2.290420] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 1482 [ 2.290429] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 1483 [ 2.290436] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 1484 [ 2.290444] usb usb3: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 1485 [ 2.290450] usb usb3: SerialNumber: sunxi-ehci 1486 [ 2.291318] hub 3-0:1.0: USB hub found 1487 [ 2.291367] hub 3-0:1.0: 1 port detected 1488 [ 2.292292] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 1489 [ 2.292658] get drv_vbus is fail, 84 1490 [ 2.292666] get ohci0-controller, regulator_io is no nocare 1491 [ 2.293007] [sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffff800992b950 1492 [ 2.293013] [sunxi-ohci0]: Not init ohci0 1493 [ 2.293128] get ohci1-controller, regulator_io is no nocare 1494 [ 2.293289] hci: request ohci1-controller gpio:80 1495 [ 2.293363] [sunxi-ohci1]: probe, pdev->name: 5200000.ohci1-controller, sunxi_ohci: 0xffffff800992b608 1496 [ 2.293413] sunxi-ohci 5200000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 1497 [ 2.293439] sunxi-ohci 5200000.ohci1-controller: new USB bus registered, assigned bus number 4 1498 [ 2.293518] sunxi-ohci 5200000.ohci1-controller: irq 289, io mem 0x00000000 1499 [ 2.354426] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 1500 [ 2.354438] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 1501 [ 2.354445] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 1502 [ 2.354452] usb usb4: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 1503 [ 2.354459] usb usb4: SerialNumber: sunxi-ohci 1504 [ 2.355317] hub 4-0:1.0: USB hub found 1505 [ 2.355364] hub 4-0:1.0: 1 port detected 1506 [ 2.356047] get drv_vbus is fail, 84 1507 [ 2.356055] get ohci2-controller, regulator_io is no nocare 1508 [ 2.356390] [sunxi-ohci2]: probe, pdev->name: 5310000.ohci2-controller, sunxi_ohci: 0xffffff800992b2c0 1509 [ 2.356438] sunxi-ohci 5310000.ohci2-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 1510 [ 2.356464] sunxi-ohci 5310000.ohci2-controller: new USB bus registered, assigned bus number 5 1511 [ 2.356541] sunxi-ohci 5310000.ohci2-controller: irq 291, io mem 0x00000000 1512 [ 2.414401] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 1513 [ 2.414412] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 1514 [ 2.414420] usb usb5: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 1515 [ 2.414427] usb usb5: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 1516 [ 2.414434] usb usb5: SerialNumber: sunxi-ohci 1517 [ 2.415308] hub 5-0:1.0: USB hub found 1518 [ 2.415355] hub 5-0:1.0: 1 port detected 1519 [ 2.416037] get drv_vbus is fail, 84 1520 [ 2.416046] get ohci3-controller, regulator_io is no nocare 1521 [ 2.416372] [sunxi-ohci3]: probe, pdev->name: 5311000.ohci3-controller, sunxi_ohci: 0xffffff800992af78 1522 [ 2.416422] sunxi-ohci 5311000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 1523 [ 2.416452] sunxi-ohci 5311000.ohci3-controller: new USB bus registered, assigned bus number 6 1524 [ 2.416529] sunxi-ohci 5311000.ohci3-controller: irq 293, io mem 0x00000000 1525 [ 2.474400] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 1526 [ 2.474410] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 1527 [ 2.474418] usb usb6: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 1528 [ 2.474425] usb usb6: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 1529 [ 2.474432] usb usb6: SerialNumber: sunxi-ohci 1530 [ 2.475298] hub 6-0:1.0: USB hub found 1531 [ 2.475343] hub 6-0:1.0: 1 port detected 1532 [ 2.476263] ohci-platform: OHCI generic platform driver 1533 [ 2.477022] usbcore: registered new interface driver uas 1534 [ 2.477190] usbcore: registered new interface driver usb-storage 1535 [ 2.477275] usbcore: registered new interface driver ums-alauda 1536 [ 2.477351] usbcore: registered new interface driver ums-cypress 1537 [ 2.477424] usbcore: registered new interface driver ums-datafab 1538 [ 2.477496] usbcore: registered new interface driver ums_eneub6250 1539 [ 2.477573] usbcore: registered new interface driver ums-freecom 1540 [ 2.477650] usbcore: registered new interface driver ums-isd200 1541 [ 2.477721] usbcore: registered new interface driver ums-jumpshot 1542 [ 2.477792] usbcore: registered new interface driver ums-karma 1543 [ 2.477869] usbcore: registered new interface driver ums-onetouch 1544 [ 2.477958] usbcore: registered new interface driver ums-realtek 1545 [ 2.478037] usbcore: registered new interface driver ums-sddr09 1546 [ 2.478108] usbcore: registered new interface driver ums-sddr55 1547 [ 2.478191] usbcore: registered new interface driver ums-usbat 1548 [ 2.478340] usb_serial_number:20080411 1549 [ 2.479564] input: sunxi-keyboard as /devices/virtual/input/input0 1550 [ 2.480203] usbcore: registered new interface driver xpad 1551 [ 2.480364] usbcore: registered new interface driver usb_acecad 1552 [ 2.480452] usbcore: registered new interface driver aiptek 1553 [ 2.480528] usbcore: registered new interface driver gtco 1554 [ 2.480605] usbcore: registered new interface driver hanwang 1555 [ 2.480693] usbcore: registered new interface driver kbtab 1556 [ 2.481153] axp2101_pek: axp2101-pek can not register without irq 1557 [ 2.481176] axp2101-pek: probe of axp2101-pek.0 failed with error -22 1558 [ 2.482643] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0 1559 [ 2.482710] sunxi-rtc rtc: RTC enabled 1560 [ 2.483183] i2c /dev entries driver 1561 [ 2.484007] lirc_dev: IR Remote Control driver registered, major 244 1562 [ 2.484018] IR NEC protocol handler initialized 1563 [ 2.484025] IR RC5(x/sz) protocol handler initialized 1564 [ 2.484030] IR RC6 protocol handler initialized 1565 [ 2.484036] IR JVC protocol handler initialized 1566 [ 2.484041] IR Sony protocol handler initialized 1567 [ 2.484047] IR SANYO protocol handler initialized 1568 [ 2.484053] IR Sharp protocol handler initialized 1569 [ 2.484059] IR MCE Keyboard/mouse protocol handler initialized 1570 [ 2.484064] IR LIRC bridge handler initialized 1571 [ 2.484070] IR XMP protocol handler initialized 1572 [ 2.484595] sunxi_ir_startup: get ir protocol failed 1573 [ 2.484637] 7040000.s_cir supply ir0 not found, using dummy regulator 1574 [ 2.484818] Registered IR keymap rc_map_sunxi 1575 [ 2.485206] input: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0/input1 1576 [ 2.485444] rc rc0: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0 1577 [ 2.486430] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input2 1578 [ 2.487074] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-rc-recv) registered at minor = 0 1579 [ 2.487772] sunxi cedar version 0.1 1580 [ 2.487968] VE: install start!!! 1581 1582 [ 2.488154] cedar_ve: cedar-ve the get irq is 278 1583 [ 2.488790] VE: get debugfs_mpp_root is NULL, please check mpp 1584 1585 [ 2.488807] VE: sunxi ve debug register driver failed! 1586 1587 [ 2.492026] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) 1588 [ 2.493331] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com 1589 [ 2.493695] Bluetooth: HCI UART driver ver 2.3 1590 [ 2.493706] Bluetooth: HCI UART protocol H4 registered 1591 [ 2.493712] Bluetooth: HCI UART protocol LL registered 1592 [ 2.493718] Bluetooth: HCI UART protocol Three-wire (H5) registered 1593 [ 2.498055] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 1594 [ 2.498079] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 1595 [ 2.498099] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 1596 [ 2.498122] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 1597 [ 2.498140] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 1598 [ 2.498152] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 1599 [ 2.498522] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 1600 [ 2.498625] sunxi-mmc sdc0: ***ctl-spec-caps*** 8 1601 [ 2.498822] sunxi-mmc sdc0: No vmmc regulator found 1602 [ 2.498829] sunxi-mmc sdc0: No vqmmc regulator found 1603 [ 2.498836] sunxi-mmc sdc0: No vdmmc regulator found 1604 [ 2.498842] sunxi-mmc sdc0: No vd33sw regulator found 1605 [ 2.498848] sunxi-mmc sdc0: No vd18sw regulator found 1606 [ 2.498855] sunxi-mmc sdc0: No vq33sw regulator found 1607 [ 2.498861] sunxi-mmc sdc0: No vq18sw regulator found 1608 [ 2.499542] sunxi-mmc sdc0: set host busy 1609 [ 2.499650] sunxi-mmc sdc0: Got CD GPIO 1610 [ 2.500017] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 1611 [ 2.500052] sunxi-mmc sdc0: no vqmmc,Check if there is regulator 1612 [ 2.513611] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1613 [ 2.530461] sunxi-mmc sdc0: detmode:gpio irq 1614 [ 2.530595] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1615 [ 2.533100] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1616 [ 2.533807] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 1617 [ 2.533916] sunxi-mmc sdc1: ***ctl-spec-caps*** 8 1618 [ 2.534055] sunxi-mmc sdc1: No vmmc regulator found 1619 [ 2.534062] sunxi-mmc sdc1: No vqmmc regulator found 1620 [ 2.534069] sunxi-mmc sdc1: No vdmmc regulator found 1621 [ 2.534075] sunxi-mmc sdc1: No vd33sw regulator found 1622 [ 2.534081] sunxi-mmc sdc1: No vd18sw regulator found 1623 [ 2.534088] sunxi-mmc sdc1: No vq33sw regulator found 1624 [ 2.534094] sunxi-mmc sdc1: No vq18sw regulator found 1625 [ 2.534875] sunxi-mmc sdc1: set host busy 1626 [ 2.534959] mmc:failed to get gpios 1627 [ 2.535163] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1628 [ 2.535258] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 1629 [ 2.537725] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1630 [ 2.550295] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1631 [ 2.561346] mmc0: host does not support reading read-only switch, assuming write-enable 1632 [ 2.563205] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 1633 [ 2.563280] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 1634 [ 2.563558] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B 1635 [ 2.563650] mmc0: new high speed SDXC card at address 0001 1636 [ 2.564765] mmcblk0: mmc0:0001 SD16G 59.5 GiB 1637 [ 2.566296] mmcblk0: p1 1638 [ 2.566959] sunxi-mmc sdc1: detmode:manually by software 1639 [ 2.569167] ledtrig-cpu: registered to indicate activity on CPUs 1640 [ 2.569901] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 1641 [ 2.570752] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 1642 [ 2.570783] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1643 [ 2.573287] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1644 [ 2.575096] sunxi_emce_hw_init()368Unable to get pclk, return fffffffe 1645 [ 2.575106] sunxi_emce_probe()590emce hw init failed! 1646 [ 2.575133] emce: probe of emce failed with error -2 1647 [ 2.575228] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 1648 [ 2.575408] hidraw: raw HID events driver (C) Jiri Kosina 1649 [ 2.576075] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 1650 [ 2.576936] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 1651 [ 2.577793] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 1652 [ 2.577841] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B 1653 [ 2.579927] usbcore: registered new interface driver usbhid 1654 [ 2.579937] usbhid: USB HID core driver 1655 [ 2.581469] optee: probing for conduit method from DT. 1656 [ 2.581482] optee: api uid mismatch 1657 [ 2.582016] usbcore: registered new interface driver snd-usb-audio 1658 [ 2.583647] [sunxi_hdmi_codec_init] driver and deivce register finished. 1659 [ 2.585342] [sunxi_internal_codec_probe]:get audio avcc failed 1660 [ 2.585381] [sunxi_internal_codec_probe]:get audio vcc3v3-audio failed 1661 [ 2.585630] lineout_vol:26, linein_gain:3, fmin_gain:3, digital_vol:0, adcdrc_cfg:0, adchpf_cfg:0, dacdrc_cfg:0, dachpf_cfg:0, ramp_func_used:1, pa_msleep_time:100, pa_ctl_level:1, gpio-spk:0 1662 [ 2.588135] sunxi-codec-machine sndcodec: sun50iw9-codec <-> cpudai mapping ok 1663 [ 2.590112] sndhdmi sndhdmi: ASoC: CPU DAI (null) not registered 1664 [ 2.590125] sndhdmi sndhdmi: snd_soc_register_card() failed: -517 1665 [ 2.592459] sunxi-ahub-cpudai 5097000.cpudai3-controller: ahub cpudai id invalid 1666 [ 2.592485] sunxi-ahub-cpudai: probe of 5097000.cpudai3-controller failed with error -22 1667 [ 2.596456] sndahub sndahub: sunxi-ahub-aif1 <-> 5097000.cpudai0-controller mapping ok 1668 [ 2.598249] sndahub sndahub: sunxi-ahub-aif2 <-> 5097000.cpudai1-controller mapping ok 1669 [ 2.600150] sndahub sndahub: sunxi-ahub-aif3 <-> 5097000.cpudai2-controller mapping ok 1670 [ 2.603089] pktgen: Packet Generator for packet performance testing. Version: 2.75 1671 [ 2.603526] u32 classifier 1672 [ 2.603533] Actions configured 1673 [ 2.603592] Netfilter messages via NETLINK v0.30. 1674 [ 2.603647] nfnl_acct: registering with nfnetlink. 1675 [ 2.603996] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) 1676 [ 2.604247] ctnetlink v0.93: registering with nfnetlink. 1677 [ 2.605014] xt_time: kernel timezone is -0000 1678 [ 2.605038] IPVS: Registered protocols (TCP, UDP) 1679 [ 2.605147] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) 1680 [ 2.605271] IPVS: Creating netns size=1928 id=0 1681 [ 2.605401] IPVS: ipvs loaded. 1682 [ 2.605409] IPVS: [rr] scheduler registered. 1683 [ 2.605506] ipip: IPv4 and MPLS over IPv4 tunneling driver 1684 [ 2.606212] gre: GRE over IPv4 demultiplexor driver 1685 [ 2.606220] ip_gre: GRE over IPv4 tunneling driver 1686 [ 2.607609] IPv4 over IPsec tunneling driver 1687 [ 2.608486] ip_tables: (C) 2000-2006 Netfilter Core Team 1688 [ 2.608765] arp_tables: arp_tables: (C) 2002 David S. Miller 1689 [ 2.608830] Initializing XFRM netlink socket 1690 [ 2.608865] IPsec XFRM device driver 1691 [ 2.609703] NET: Registered protocol family 10 1692 [ 2.611651] mip6: Mobile IPv6 1693 [ 2.611691] ip6_tables: (C) 2000-2006 Netfilter Core Team 1694 [ 2.613001] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver 1695 [ 2.614688] NET: Registered protocol family 17 1696 [ 2.614730] NET: Registered protocol family 15 1697 [ 2.614888] Bridge firewalling registered 1698 [ 2.615022] Bluetooth: RFCOMM TTY layer initialized 1699 [ 2.615040] Bluetooth: RFCOMM socket layer initialized 1700 [ 2.615072] Bluetooth: RFCOMM ver 1.11 1701 [ 2.615087] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 1702 [ 2.615092] Bluetooth: BNEP filters: protocol multicast 1703 [ 2.615105] Bluetooth: BNEP socket layer initialized 1704 [ 2.615111] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 1705 [ 2.615123] Bluetooth: HIDP socket layer initialized 1706 [ 2.615216] l2tp_core: L2TP core driver, V2.0 1707 [ 2.615230] l2tp_ppp: PPPoL2TP kernel driver, V2.0 1708 [ 2.615236] 8021q: 802.1Q VLAN Support v1.8 1709 [ 2.615435] sctp: Hash tables configured (bind 256/256) 1710 [ 2.616036] Key type dns_resolver registered 1711 [ 2.616177] Registered cp15_barrier emulation handler 1712 [ 2.616190] Registered setend emulation handler 1713 [ 2.617224] registered taskstats version 1 1714 [ 2.628757] zswap: default zpool zbud not available 1715 [ 2.628764] zswap: pool creation failed 1716 [ 2.631550] Btrfs loaded, crc32c=crc32c-arm64-hw 1717 [ 2.632312] HDMI 2.0 driver init start! 1718 [ 2.632327] boot_hdmi=true 1719 [ 2.633141] Can not find the node of esm 1720 [ 2.633159] ERROR: pinctrl_get for HDMI2.0 DDC fail 1721 [ 2.633247] Get hdmi_power0:vcc-hdmi 1722 [ 2.633286] 6000000.hdmi supply vcc-hdmi not found, using dummy regulator 1723 [ 2.633458] Get hdmi_power1:vdd-hdmi 1724 [ 2.633480] 6000000.hdmi supply vdd-hdmi not found, using dummy regulator 1725 [ 2.635080] hdmi_cec_init 1726 [ 2.635565] [DISP] disp_device_attached,line:146: 1727 [ 2.635574] attached ok, mgr0<-->device0, type=4 1728 [ 2.635585] [HDMI receive params]: tv mode: 0xa format:0x0 data bits:0x0 eotf:0x0 cs:0x0 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8 1729 [ 2.635598] [DISP] disp_hdmi_set_mode,line:648: 1730 [ 2.635602] hdmi_set_mode is null! 1731 [ 2.637248] HDMI2.0 module init end 1732 [ 2.648351] sunxi-thermal 5070400.thermal_sensor: avcc is not calibrated 1733 [ 2.651812] cpu cpu1: opp_list_debug_create_link: Failed to create link 1734 [ 2.651824] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12) 1735 [ 2.651859] cpu cpu2: opp_list_debug_create_link: Failed to create link 1736 [ 2.651867] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12) 1737 [ 2.651897] cpu cpu3: opp_list_debug_create_link: Failed to create link 1738 [ 2.651904] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12) 1739 [ 2.654207] sndhdmi sndhdmi: audiohdmi-dai <-> sunxi-ahub-cpu-aif1 mapping ok 1740 [ 2.655096] get det_vbus is fail, 84 1741 [ 2.655103] get id is fail, 84 1742 [ 2.655576] sunxi-rtc rtc: setting system clock to 2023-09-25 14:52:49 UTC (1695653569) 1743 [ 2.659337] ALSA device list: 1744 [ 2.659345] #0: audiocodec 1745 [ 2.659349] #1: sndahub 1746 [ 2.659352] #2: sndhdmi 1747 [ 2.661025] Freeing unused kernel memory: 3008K 1748 [ 2.706769] random: systemd-udevd: uninitialized urandom read (16 bytes read) 1749 [ 2.708870] random: systemd-udevd: uninitialized urandom read (16 bytes read) 1750 [ 2.711780] random: systemd-udevd: uninitialized urandom read (16 bytes read) 1751 [ 2.783214] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device connect 1752 [ 2.943730] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device disconnect 1753 [ 3.040328] HDMI cable is connected 1754 [ 3.293593] usb 4-1: new full-speed USB device number 2 using sunxi-ohci 1755 [ 3.514094] usb 4-1: New USB device found, idVendor=24ae, idProduct=2013 1756 [ 3.514104] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 1757 [ 3.514109] usb 4-1: Product: Rapoo 2.4G Wireless Device 1758 [ 3.514113] usb 4-1: Manufacturer: RAPOO 1759 [ 3.521911] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.0/0003:24AE:2013.0001/input/input3 1760 [ 3.522440] hid-generic 0003:24AE:2013.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input0 1761 [ 3.528055] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.1/0003:24AE:2013.0002/input/input4 1762 [ 3.584346] hid-generic 0003:24AE:2013.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input1 1763 [ 3.588361] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.2/0003:24AE:2013.0003/input/input5 1764 [ 3.644493] hid-generic 0003:24AE:2013.0003: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input2 1765 [ 4.173433] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) 1766 [ 5.101534] cgroup: cgroup2: unknown option "nsdelegate,memory_recursiveprot" 1767 [ 5.102087] cgroup: cgroup2: unknown option "nsdelegate" 1768 [ 5.122256] systemd[1]: systemd 252.12-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) 1769 [ 5.122280] systemd[1]: Detected architecture arm64. 1770 [ 5.123378] systemd[1]: Warning! Reported kernel version 4.9.318-legacy-sun50iw9 is older than systemd's required baseline kernel version 4.15. Your mileage may vary. 1771 [ 5.140746] systemd[1]: Hostname set to <opi>. 1772 [ 5.168066] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation 1773 [ 6.722904] (sd-execut[1458]: /usr/lib/systemd/system-generators/netplan failed with exit status 1. 1774 [ 6.826941] 1775 insmod_device_driver 1776 1777 [ 6.827189] device_chose finished 124! 1778 [ 7.129729] systemd[1]: /lib/systemd/system/hdmi-audio.service:10: Support for option SysVStartPriority= has been removed and it is ignored 1779 [ 7.369172] systemd[1]: Queued start job for default target graphical.target. 1780 [ 7.376823] systemd[1]: Created slice system-getty.slice - Slice /system/getty. 1781 [ 7.379020] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. 1782 [ 7.381318] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. 1783 [ 7.382600] systemd[1]: Created slice user.slice - User and Session Slice. 1784 [ 7.383253] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. 1785 [ 7.383868] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 1786 [ 7.384202] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. 1787 [ 7.384756] systemd[1]: Reached target slices.target - Slice Units. 1788 [ 7.385090] systemd[1]: Reached target swap.target - Swaps. 1789 [ 7.385389] systemd[1]: Reached target time-set.target - System Time Set. 1790 [ 7.385902] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. 1791 [ 7.403268] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket. 1792 [ 7.404433] systemd[1]: Listening on syslog.socket - Syslog Socket. 1793 [ 7.405388] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. 1794 [ 7.406056] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. 1795 [ 7.407727] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. 1796 [ 7.408673] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). 1797 [ 7.409695] systemd[1]: Listening on systemd-journald.socket - Journal Socket. 1798 [ 7.411938] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. 1799 [ 7.412834] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. 1800 [ 7.416821] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... 1801 [ 7.421468] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... 1802 [ 7.426487] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... 1803 [ 7.427699] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 1804 [ 7.428681] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). 1805 [ 7.436271] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... 1806 [ 7.441910] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... 1807 [ 7.447703] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... 1808 [ 7.454201] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... 1809 [ 7.461600] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 1810 [ 7.470060] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... 1811 [ 7.478698] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 1812 [ 7.486727] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... 1813 [ 7.496520] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 1814 [ 7.498007] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). 1815 [ 7.511229] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... 1816 [ 7.517677] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... 1817 [ 7.523815] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... 1818 [ 7.525336] fuse init (API version 7.26) 1819 [ 7.536260] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. 1820 [ 7.538668] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. 1821 [ 7.541222] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. 1822 [ 7.544423] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. 1823 [ 7.549066] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. 1824 [ 7.553679] systemd[1]: modprobe@configfs.service: Deactivated successfully. 1825 [ 7.554461] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. 1826 [ 7.557916] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 1827 [ 7.558773] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 1828 [ 7.603516] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro 1829 [ 7.612080] systemd[1]: modprobe@drm.service: Deactivated successfully. 1830 [ 7.627612] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. 1831 [ 7.632507] fbtft: module is from the staging directory, the quality is unknown, you have been warned. 1832 [ 7.640673] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned. 1833 [ 7.641758] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 1834 [ 7.641769] spidev spi1.1: dh2228fv spi1.1 16777kHz 8 bits mode=0x00 1835 [ 7.641965] spidev spi1.1: Deleting spi1.1 1836 [ 7.642784] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 1837 [ 7.643217] fbtft_device: GPIOS used by 'fb_st7735r': 1838 [ 7.643224] fbtft_device: 'reset' = GPIO73 1839 [ 7.643228] fbtft_device: 'dc' = GPIO70 1840 [ 7.643242] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 1841 [ 7.643247] spi spi1.1: fb_st7735r spi1.1 16000kHz 8 bits mode=0x00 1842 [ 7.644283] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 1843 [ 7.665419] systemd[1]: modprobe@fuse.service: Deactivated successfully. 1844 [ 7.680927] WCN: marlin_init entry! 1845 [ 7.682109] WCN: marlin_parse_dt reset gpio=211 1846 [ 7.682120] WCN_ERR: gpio reset request err: 211 1847 [ 7.682125] WCN: wcn config bt wake host 1848 [ 7.682626] WCN: marlin_registsr_bt_wake bt_hostwake gpio=208 mul-sel=6 pull=-1 drv_level=-1 data=0 intnum=193 1849 [ 7.682867] WCN: wcn config wifi wake host 1850 [ 7.682900] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 1851 [ 7.686401] sdiohal:sdiohal_init ok 1852 [ 7.687690] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. 1853 [ 7.690160] WCN: marlin_probe ok! 1854 [ 7.692178] systemd[1]: modprobe@loop.service: Deactivated successfully. 1855 [ 7.693023] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 1856 [ 7.696210] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. 1857 [ 7.699361] mtty_probe init device addr: 0xffffffc009a62f00 1858 [ 7.702980] -->rfkill_bluetooth_init 1859 [ 7.703219] <--rfkill_bluetooth_init 1860 [ 7.746330] WCN: start_marlin [MARLIN_WIFI] 1861 [ 7.746344] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 1862 [ 7.746348] WCN: the first power on start 1863 [ 7.753319] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... 1864 [ 7.759541] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... 1865 [ 7.760731] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 1866 [ 7.767285] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... 1867 [ 7.768094] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 1868 [ 7.774614] systemd[1]: Starting systemd-sysusers.service - Create System Users... 1869 [ 7.790586] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. 1870 [ 7.793206] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. 1871 [ 7.808935] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. 1872 [ 7.844542] systemd[1]: Finished systemd-sysusers.service - Create System Users. 1873 [ 7.851045] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... 1874 [ 7.863660] WCN: marlin chip en pull up 1875 [ 7.893670] sdiohal:sdiohal_scan_card 1876 [ 7.893692] sunxi-wlan soc@03000000:wlan: bus_index: 1 1877 [ 7.893746] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 1878 [ 7.910290] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1879 [ 7.931090] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 1880 [ 7.932031] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 1881 [ 7.932076] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1882 [ 7.934615] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1883 [ 7.937717] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1884 [ 7.953107] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. 1885 [ 7.953636] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 1886 [ 7.955164] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. 1887 [ 7.961258] systemd[1]: Mounting tmp.mount - /tmp... 1888 [ 7.967862] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... 1889 [ 7.973982] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B 1890 [ 7.974741] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 1891 [ 7.974807] sunxi-mmc sdc1: sdc set ios:clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 1892 [ 7.975417] mmc1: new ultra high speed SDR104 SDIO card at address 8800 1893 [ 7.975947] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=150000000 1894 [ 7.976137] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 1895 [ 7.976159] WCN: marlin_scan_finish! 1896 [ 7.976164] sdiohal:probe ok 1897 [ 7.976179] sdiohal:scan end! 1898 [ 7.976185] WCN: then marlin start to download 1899 [ 7.976214] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! 1900 [ 7.991119] systemd[1]: Mounted tmp.mount - /tmp. 1901 [ 7.993310] systemd[1]: Reached target local-fs.target - Local File Systems. 1902 [ 7.998567] systemd[1]: Starting armbian-led-state.service - Armbian leds state... 1903 [ 8.004446] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config... 1904 [ 8.010353] systemd[1]: Starting console-setup.service - Set console font and keymap... 1905 [ 8.015562] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data... 1906 [ 8.041808] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 1907 [ 8.051646] systemd[1]: Starting ufw.service - Uncomplicated firewall... 1908 [ 8.056330] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices. 1909 [ 8.061917] systemd[1]: Finished console-setup.service - Set console font and keymap. 1910 [ 8.107595] WCN: combin_img 0 marlin_firmware_write finish and successful 1911 [ 8.107769] WCN: marlin_start_run read reset reg val:0x1 1912 [ 8.107773] WCN: after do marlin_start_run reset reg val:0x0 1913 [ 8.107983] WCN: s_marlin_bootup_time=8107975260 1914 [ 8.111812] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown... 1915 [ 8.113960] WCN: clock mode: TSX 1916 [ 8.114174] WCN: marlin_write_cali_data sync init_state:0x1a0f50 1917 [ 8.119656] systemd[1]: Starting systemd-udev-settle.service - Wait for udev To Complete Device Initialization... 1918 [ 8.123269] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data. 1919 [ 8.126534] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 1920 [ 8.128442] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 1921 [ 8.129410] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 1922 [ 8.134094] systemd[1]: Finished ufw.service - Uncomplicated firewall. 1923 [ 8.137291] systemd[1]: Received SIGRTMIN+20 from PID 1421 (plymouthd). 1924 [ 8.137872] systemd[1]: Reached target network-pre.target - Preparation for Network. 1925 [ 8.140733] WCN: marlin_write_cali_data sync init_state:0x1a0f50 1926 [ 8.167217] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1 1927 [ 8.167226] WCN: sdio_config bt_wake_host trigger:[high] 1928 [ 8.167229] WCN: sdio_config irq:[inband] 1929 [ 8.167233] WCN: sdio_config wl_wake_host trigger:[high] 1930 [ 8.167241] WCN: sdio_config wake_host_level_duration_time:[20ms] 1931 [ 8.167244] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse] 1932 [ 8.167249] WCN: marlin_send_sdio_config_to_cp sdio_config:0xb8f01 (enable config) 1933 [ 8.167615] WCN: marlin_write_cali_data finish 1934 [ 8.167904] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 1935 [ 8.193884] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 1936 [ 8.207431] systemd[1]: Finished ifupdown-pre.service - Helper to synchronize boot up for ifupdown. 1937 [ 8.210652] systemd[1]: Finished armbian-led-state.service - Armbian leds state. 1938 [ 8.220528] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 1939 [ 8.247169] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 1940 [ 8.273851] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 1941 [ 8.300524] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0 1942 [ 8.300534] WCN: marlin_bind_verify confuse data: 0x2e197f4f5a117df30c640a9405a3d69 1943 [ 8.300550] WCN: marlin_bind_verify verify data: 0x16d6ab91e1d71b3ae4604f224021aa 1944 [ 8.301247] WCN: check_cp_ready sync val:0xf0f0f0f7, prj_type val:0x0 1945 [ 8.327207] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0 1946 [ 8.327216] sdiohal:sdiohal_runtime_get entry 1947 [ 8.327429] WCN: get_cp2_version entry! 1948 [ 8.329113] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~ 1949 [ 8.329144] WCN: switch_cp2_log - close entry! 1950 [ 8.330472] WCN: WCND at cmd read:OK 1951 [ 8.330551] WCN: then marlin download finished and run ok 1952 [ 8.330557] WCN: start_loopcheck 1953 [ 8.344877] WCN: get_board_ant_num [one_ant] 1954 [ 8.344888] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini 1955 [ 8.405967] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings. 1956 [ 8.411352] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. 1957 [ 8.419183] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... 1958 [ 8.486413] zram: Added device: zram0 1959 [ 8.487193] zram: Added device: zram1 1960 [ 8.488112] zram: Added device: zram2 1961 [ 8.496220] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. 1962 [ 8.504088] systemd[1]: Starting networking.service - Raise network interfaces... 1963 [ 8.521937] zswap: can't enable, initialization failed 1964 [ 8.580851] zram0: detected capacity change from 0 to 506396672 1965 [ 8.586326] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files. 1966 [ 8.603653] systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen... 1967 [ 8.668634] fb_st7735r: module is from the staging directory, the quality is unknown, you have been warned. 1968 [ 8.685418] systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen. 1969 [ 8.687924] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 1970 [ 8.688982] systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch. 1971 [ 8.689622] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. 1972 [ 9.128629] systemd[1]: Finished networking.service - Raise network interfaces. 1973 [ 9.763740] graphics fb1: fb_st7735r frame buffer, 160x128, 40 KiB video memory, 4 KiB buffer memory, fps=20, spi1.1 at 16 MHz 1974 [ 9.890189] systemd[1]: Found device dev-ttyS0.device - /dev/ttyS0. 1975 [ 10.028067] systemd[1]: Reached target usb-gadget.target - Hardware activated USB gadget. 1976 [ 10.654680] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 1977 [ 10.654923] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 1978 [ 10.655554] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 1979 [ 10.667241] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 1980 [ 10.677764] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 1981 [ 10.684938] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 1982 [ 10.698026] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 1983 [ 10.702064] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 1984 [ 10.702944] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 1985 [ 10.707530] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 1986 [ 10.708623] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 1987 [ 10.711708] systemd[1]: modprobe@loop.service: Deactivated successfully. 1988 [ 10.712834] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 1989 [ 10.714975] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 1990 [ 10.715235] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 1991 [ 10.774342] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 1992 [ 10.779309] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 1993 [ 10.780190] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 1994 [ 10.792320] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch. 1995 [ 10.811076] systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status... 1996 [ 10.857080] sunxi-bt soc@03000000:bt: set block: 0 1997 [ 10.873938] bluetooth_set_power: start_block=0 1998 [ 10.873950] WCN: start_marlin [MARLIN_BLUETOOTH] 1999 [ 10.873960] WCN: marlin power state:4, subsys: [MARLIN_BLUETOOTH] power 1 2000 [ 10.873965] WCN: marlin have open, GNSS is closed 2001 [ 10.873970] bluetooth_set_power: end_block=0 2002 [ 10.922196] systemd[1]: Started systemd-rfkill.service - Load/Save RF Kill Switch Status. 2003 [ 11.094722] systemd[1]: Finished systemd-udev-settle.service - Wait for udev To Complete Device Initialization. 2004 [ 11.100559] systemd[1]: Starting brltty.service - Braille Device Support... 2005 [ 11.626231] Adding 494524k swap on /dev/zram0. Priority:5 extents:1 across:494524k SSFS 2006 [ 11.768144] zram1: detected capacity change from 0 to 52428800 2007 [ 11.859100] systemd[1]: Started brltty.service - Braille Device Support. 2008 [ 11.873324] input: BRLTTY 6.5 Linux Screen Driver Keyboard as /devices/virtual/input/input6 2009 [ 15.857495] systemd[1]: Finished armbian-zram-config.service - Armbian ZRAM config. 2010 [ 15.863476] systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging... 2011 [ 15.925725] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard 2012 [ 15.937064] systemd[1]: systemd-rfkill.service: Deactivated successfully. 2013 [ 19.597599] systemd[1]: Finished armbian-ramlog.service - Armbian memory supported logging. 2014 [ 19.604154] systemd[1]: Starting systemd-journald.service - Journal Service... 2015 [ 19.884029] systemd-journald[1921]: Data hash table of /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal has a fill level at 75.2 (1658 of 2204 items, 1269760 file size, 765 bytes per hash table item), suggesting rotation. 2016 [ 19.884051] systemd-journald[1921]: /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal: Journal header limits reached or header out-of-date, rotating. 2017 [ 19.891164] systemd[1]: Started systemd-journald.service - Journal Service. 2018 [ 19.938167] systemd-journald[1921]: Received client request to flush runtime journal. 2019 [ 20.306857] IPVS: Creating netns size=1928 id=1 2020 2021 ### armbian-release: 2022 2023 # PLEASE DO NOT EDIT THIS FILE 2024 BOARD=orangepizero2 2025 BOARD_NAME="Orange Pi Zero2" 2026 BOARDFAMILY=sun50iw9 2027 BUILD_REPOSITORY_URL=https://github.com/armbian/build 2028 BUILD_REPOSITORY_COMMIT=ac829eb6 2029 LINUXFAMILY=sun50iw9 2030 ARCH=arm64 2031 IMAGE_TYPE=stable 2032 BOARD_TYPE=conf 2033 INITRD_ARCH=arm 2034 KERNEL_IMAGE_TYPE=Image 2035 FORCE_BOOTSCRIPT_UPDATE=yes 2036 VENDOR=Armbian 2037 BOOTSCRIPT_FORCE_UPDATE="yes" 2038 BOOTSCRIPT_DST="boot.cmd" 2039 VERSION=23.8.1 2040 REVISION=23.8.1 2041 BRANCH=legacy 2042 2043 ### boot environment: 2044 2045 verbosity=1 2046 console=serial 2047 #disp_mode=1080p60 2048 #fb0_width=1280 2049 #fb0_height=720 2050 rootdev=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e 2051 rootfstype=ext4 2052 overlays=spi-spidev 2053 param_spidev_spi_bus=1 2054 param_spidev_spi_cs=1 2055 extraargs=fbcon=map:1 2056 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u 2057 2058 ### lsusb: 2059 2060 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 2061 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 2062 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 2063 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 2064 Bus 004 Device 002: ID 24ae:2013 Shenzhen Rapoo Technology Co., Ltd. Rapoo 2.4G Wireless Device 2065 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 2066 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 2067 2068 ### lscpu: 2069 2070 Architecture: aarch64 2071 CPU op-mode(s): 32-bit, 64-bit 2072 Byte Order: Little Endian 2073 CPU(s): 4 2074 On-line CPU(s) list: 0-3 2075 Vendor ID: ARM 2076 Model name: Cortex-A53 2077 Model: 4 2078 Thread(s) per core: 1 2079 Core(s) per cluster: 4 2080 Socket(s): - 2081 Cluster(s): 1 2082 Stepping: r0p4 2083 CPU(s) scaling MHz: 100% 2084 CPU max MHz: 1512.0000 2085 CPU min MHz: 480.0000 2086 BogoMIPS: 48.00 2087 Flags: fp asimd aes pmull sha1 sha2 crc32 2088 2089 ### cpuinfo: 2090 2091 processor : 0 2092 BogoMIPS : 48.00 2093 Features : fp asimd aes pmull sha1 sha2 crc32 2094 CPU implementer : 0x41 2095 CPU architecture: 8 2096 CPU variant : 0x0 2097 CPU part : 0xd03 2098 CPU revision : 4 2099 2100 processor : 1 2101 BogoMIPS : 48.00 2102 Features : fp asimd aes pmull sha1 sha2 crc32 2103 CPU implementer : 0x41 2104 CPU architecture: 8 2105 CPU variant : 0x0 2106 CPU part : 0xd03 2107 CPU revision : 4 2108 2109 processor : 2 2110 BogoMIPS : 48.00 2111 Features : fp asimd aes pmull sha1 sha2 crc32 2112 CPU implementer : 0x41 2113 CPU architecture: 8 2114 CPU variant : 0x0 2115 CPU part : 0xd03 2116 CPU revision : 4 2117 2118 processor : 3 2119 BogoMIPS : 48.00 2120 Features : fp asimd aes pmull sha1 sha2 crc32 2121 CPU implementer : 0x41 2122 CPU architecture: 8 2123 CPU variant : 0x0 2124 CPU part : 0xd03 2125 CPU revision : 4 2126 2127 2128 ### meminfo: 2129 2130 MemTotal: 989056 kB 2131 MemFree: 795972 kB 2132 MemAvailable: 885620 kB 2133 Buffers: 15732 kB 2134 Cached: 81084 kB 2135 SwapCached: 0 kB 2136 Active: 65604 kB 2137 Inactive: 52188 kB 2138 Active(anon): 21192 kB 2139 Inactive(anon): 652 kB 2140 Active(file): 44412 kB 2141 Inactive(file): 51536 kB 2142 Unevictable: 0 kB 2143 Mlocked: 0 kB 2144 SwapTotal: 494524 kB 2145 SwapFree: 494524 kB 2146 Dirty: 5340 kB 2147 Writeback: 0 kB 2148 AnonPages: 21100 kB 2149 Mapped: 24592 kB 2150 Shmem: 824 kB 2151 Slab: 33012 kB 2152 SReclaimable: 9044 kB 2153 SUnreclaim: 23968 kB 2154 KernelStack: 2528 kB 2155 PageTables: 1060 kB 2156 NFS_Unstable: 0 kB 2157 Bounce: 0 kB 2158 WritebackTmp: 0 kB 2159 CommitLimit: 989052 kB 2160 Committed_AS: 80292 kB 2161 VmallocTotal: 263061440 kB 2162 VmallocUsed: 0 kB 2163 VmallocChunk: 0 kB 2164 CmaTotal: 16384 kB 2165 CmaFree: 7468 kB 2166 HugePages_Total: 0 2167 HugePages_Free: 0 2168 HugePages_Rsvd: 0 2169 HugePages_Surp: 0 2170 Hugepagesize: 2048 kB 2171 2172 ### virtual memory: 2173 2174 vm.admin_reserve_kbytes = 8192 2175 vm.block_dump = 0 2176 vm.compact_unevictable_allowed = 1 2177 vm.dirty_background_bytes = 0 2178 vm.dirty_background_ratio = 10 2179 vm.dirty_bytes = 0 2180 vm.dirty_expire_centisecs = 3000 2181 vm.dirty_ratio = 20 2182 vm.dirtytime_expire_seconds = 43200 2183 vm.dirty_writeback_centisecs = 500 2184 vm.extfrag_threshold = 500 2185 vm.extra_free_kbytes = 0 2186 vm.hugepages_treat_as_movable = 0 2187 vm.hugetlb_shm_group = 0 2188 vm.laptop_mode = 0 2189 vm.legacy_va_layout = 0 2190 vm.lowmem_reserve_ratio = 256 32 2191 vm.max_map_count = 65530 2192 vm.min_free_kbytes = 3937 2193 vm.mmap_min_addr = 4096 2194 vm.mmap_rnd_bits = 18 2195 vm.mmap_rnd_compat_bits = 11 2196 vm.nr_hugepages = 0 2197 vm.nr_overcommit_hugepages = 0 2198 vm.nr_pdflush_threads = 0 2199 vm.oom_dump_tasks = 1 2200 vm.oom_kill_allocating_task = 0 2201 vm.overcommit_kbytes = 0 2202 vm.overcommit_memory = 0 2203 vm.overcommit_ratio = 50 2204 vm.page-cluster = 0 2205 vm.panic_on_oom = 0 2206 vm.percpu_pagelist_fraction = 0 2207 vm.stat_interval = 1 2208 vm.swappiness = 100 2209 vm.user_reserve_kbytes = 30004 2210 vm.vfs_cache_pressure = 100 2211 vm.watermark_scale_factor = 10 2212 2213 ### ip addr: 2214 2215 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 2216 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2217 inet XXX.XXX.0.1/8 scope host lo 2218 valid_lft forever preferred_lft forever 2219 inet6 ::1/128 scope host noprefixroute 2220 valid_lft forever preferred_lft forever 2221 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 2222 link/ether a2:f9:75:52:ad:58 brd ff:ff:ff:ff:ff:ff 2223 3: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 2224 link/ether fa:6e:f4:da:68:8c brd ff:ff:ff:ff:ff:ff 2225 4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 2226 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 2227 5: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN group default qlen 1 2228 link/gre XXX.XXX.0.0 brd XXX.XXX.0.0 2229 6: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN group default qlen 1000 2230 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 2231 7: ip_vti0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 2232 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 2233 8: ip6_vti0@NONE: <NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1 2234 link/tunnel6 :: brd :: 2235 9: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 2236 link/sit XXX.XXX.0.0 brd XXX.XXX.0.0 2237 10: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN group default qlen 1 2238 link/tunnel6 :: brd :: 2239 11: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 2240 link/ether 48:c9:27:84:d1:40 brd ff:ff:ff:ff:ff:ff 2241 2242 ### partitions: 2243 2244 major minor #blocks name 2245 2246 179 0 62410752 mmcblk0 2247 179 1 61763584 mmcblk0p1 2248 253 0 494528 zram0 2249 253 1 51200 zram1 2250 2251 ### df: 2252 2253 udev 466M 0 466M 0% /dev 2254 tmpfs 97M 900K 96M 1% /run 2255 /dev/mmcblk0p1 58G 5.7G 52G 10% / 2256 tmpfs 483M 0 483M 0% /dev/shm 2257 tmpfs 5.0M 0 5.0M 0% /run/lock 2258 tmpfs 483M 4.0K 483M 1% /tmp 2259 /dev/zram1 47M 4.8M 39M 11% /var/log 2260 2261 ### lsblk: 2262 2263 NAME FSTYPE SIZE MOUNTPOINT UUID 2264 mmcblk0 59.5G 2265 └─mmcblk0p1 ext4 58.9G / 0c85f38a-a16e-49a0-a53c-99d9856e983e 2266 zram1 50M /var/log 2267 zram2 0B 2268 2269 ### zramctl: 2270 2271 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT 2272 /dev/zram1 lz4 50M 4.8M 1.4M 1.8M 4 /var/log 2273 /dev/zram0 lzo 482.9M 4K 76B 12K 4 [SWAP] 2274 2275 ### mtab: 2276 2277 /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 2278 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 2279 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 2280 2281 ### mmc0:0001 info: 2282 2283 manfid: 0x0000fe 2284 cid: fe3432534431364720000000690091f5 2285 fwrev: 0x0 2286 csd: 400e00325b590001dc277f800a40008b 2287 ocr: 0x00200000 2288 type: SD 2289 date: 01/2009 2290 hwrev: 0x2 2291 dsr: 0x404 2292 serial: 0x00000069 2293 erase_size: 512 2294 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SD16G MODALIAS=mmc:block 2295 ssr: 000000000800000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 2296 scr: 0285808300000000 2297 oemid: 0x3432 2298 preferred_erase_size: 4194304 2299 name: SD16G 2300 2301 ### Boot system health: 2302 2303 Time CPU load %cpu %sys %usr %nice %io %irq Tcpu C.St. 2304 11:53:09 1512 MHz 1.25 39% 19% 13% 0% 7% 0% 48.2 °C 0/5 2305 11:53:10 1512 MHz 1.25 97% 21% 45% 2% 28% 0% 48.2 °C 0/5 2306 11:53:10 1512 MHz 1.25 100% 29% 50% 0% 19% 0% 48.9 °C 0/5 2307 11:53:11 1512 MHz 1.25 96% 20% 23% 0% 50% 0% 48.9 °C 0/5 2308 11:53:11 1512 MHz 1.25 99% 27% 40% 1% 30% 0% 48.9 °C 0/5 2309 2310 ### Activated 1 lzo zram swap devices with 482MB each. 2311 ### Activated Armbian ramlog partition with lz4 compression 2312 2313 Mon Sep 25 12:17:53 PM -03 2023 | Orange Pi Zero2 | 23.8.1 | arm64 | aarch64 | 4.9.318-legacy-sun50iw9 2314 2315 ### dmesg: 2316 2317 [ 0.000000] Booting Linux on physical CPU 0x0 2318 [ 0.000000] Linux version 4.9.318-legacy-sun50iw9 (armbian@next) (gcc version 11.4.0 (Ubuntu 11.4.0-1ubuntu1~22.04) ) #1 SMP PREEMPT Tue May 17 02:06:13 UTC 2022 2319 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] 2320 [ 0.000000] disp reserve base 0x7bf4fcc0 ,size 0x384000 2321 [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 2322 [ 0.000000] On node 0 totalpages: 262144 2323 [ 0.000000] DMA zone: 4096 pages used for memmap 2324 [ 0.000000] DMA zone: 0 pages reserved 2325 [ 0.000000] DMA zone: 262144 pages, LIFO batch:31 2326 [ 0.000000] psci: probing for conduit method from DT. 2327 [ 0.000000] psci: PSCIv1.0 detected in firmware. 2328 [ 0.000000] psci: Using standard PSCI v0.2 function IDs 2329 [ 0.000000] psci: Trusted OS migration not required 2330 [ 0.000000] psci: SMC Calling Convention v1.0 2331 [ 0.000000] percpu: Embedded 21 pages/cpu s45592 r8192 d32232 u86016 2332 [ 0.000000] pcpu-alloc: s45592 r8192 d32232 u86016 alloc=21*4096 2333 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 2334 [ 0.000000] Detected VIPT I-cache on CPU0 2335 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 2336 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258048 2337 [ 0.000000] Kernel command line: root=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e rootwait rootfstype=ext4 splash=verbose console=ttyS0,115200 consoleblank=0 loglevel=1 ubootpart=68ea14b7-01 disp_reserve=3686400,0x7bf4fcc0 fbcon=map:1 2338 [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes 2339 [ 0.000000] log_buf_len total cpu_extra contributions: 393216 bytes 2340 [ 0.000000] log_buf_len min size: 131072 bytes 2341 [ 0.000000] log_buf_len: 524288 bytes 2342 [ 0.000000] early log buf free: 129352(98%) 2343 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) 2344 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) 2345 [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) 2346 [ 0.000000] Memory: 952408K/1048576K available (11902K kernel code, 1476K rwdata, 6668K rodata, 3008K init, 674K bss, 79784K reserved, 16384K cma-reserved) 2347 [ 0.000000] Virtual kernel memory layout: 2348 [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) 2349 [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) 2350 [ 0.000000] .text : 0xffffff8008208000 - 0xffffff8008da8000 ( 11904 KB) 2351 [ 0.000000] .rodata : 0xffffff8008da8000 - 0xffffff8009438000 ( 6720 KB) 2352 [ 0.000000] .init : 0xffffff8009438000 - 0xffffff8009728000 ( 3008 KB) 2353 [ 0.000000] .data : 0xffffff8009728000 - 0xffffff8009899008 ( 1477 KB) 2354 [ 0.000000] .bss : 0xffffff8009899008 - 0xffffff8009941b94 ( 675 KB) 2355 [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) 2356 [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) 2357 [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) 2358 [ 0.000000] 0xffffffbf00000000 - 0xffffffbf01000000 ( 16 MB actual) 2359 [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB) 2360 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 2361 [ 0.000000] Preemptible hierarchical RCU implementation. 2362 [ 0.000000] Build-time adjustment of leaf fanout to 64. 2363 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 2364 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns 2365 [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt). 2366 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 2367 [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 2368 [ 0.000211] Console: colour dummy device 80x25 2369 [ 0.000227] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) 2370 [ 0.000235] pid_max: default: 32768 minimum: 301 2371 [ 0.000433] Security Framework initialized 2372 [ 0.000442] AppArmor: AppArmor disabled by boot time parameter 2373 [ 0.000560] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) 2374 [ 0.000567] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) 2375 [ 0.001839] sched-energy: CPU device node has no sched-energy-costs 2376 [ 0.001854] Invalid sched_group_energy for CPU0 2377 [ 0.001861] CPU0: update cpu_capacity 1024 2378 [ 0.008953] ASID allocator initialised with 32768 entries 2379 [ 0.027923] BOOTEVENT: 27.909457: ON 2380 [ 0.055902] Detected VIPT I-cache on CPU1 2381 [ 0.055955] Invalid sched_group_energy for CPU1 2382 [ 0.055959] CPU1: update cpu_capacity 1024 2383 [ 0.055962] CPU1: Booted secondary processor [410fd034] 2384 [ 0.079289] Detected VIPT I-cache on CPU2 2385 [ 0.079327] Invalid sched_group_energy for CPU2 2386 [ 0.079330] CPU2: update cpu_capacity 1024 2387 [ 0.079333] CPU2: Booted secondary processor [410fd034] 2388 [ 0.102692] Detected VIPT I-cache on CPU3 2389 [ 0.102726] Invalid sched_group_energy for CPU3 2390 [ 0.102729] CPU3: update cpu_capacity 1024 2391 [ 0.102732] CPU3: Booted secondary processor [410fd034] 2392 [ 0.102813] Brought up 4 CPUs 2393 [ 0.102820] SMP: Total of 4 processors activated. 2394 [ 0.102829] CPU features: detected feature: 32-bit EL0 Support 2395 [ 0.102835] CPU features: detected feature: Kernel page table isolation (KPTI) 2396 [ 0.106595] CPU: All CPU(s) started at EL1 2397 [ 0.106617] alternatives: patching kernel code 2398 [ 0.106790] Invalid sched_group_energy for CPU3 2399 [ 0.106800] CPU3: update max cpu_capacity 1024 2400 [ 0.106806] Invalid sched_group_energy for Cluster3 2401 [ 0.106811] Invalid sched_group_energy for CPU2 2402 [ 0.106816] Invalid sched_group_energy for Cluster2 2403 [ 0.106821] Invalid sched_group_energy for CPU1 2404 [ 0.106827] Invalid sched_group_energy for Cluster1 2405 [ 0.106831] Invalid sched_group_energy for CPU0 2406 [ 0.106837] Invalid sched_group_energy for Cluster0 2407 [ 0.108257] devtmpfs: initialized 2408 [ 0.112702] CPU1: update max cpu_capacity 1024 2409 [ 0.143397] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns 2410 [ 0.143418] futex hash table entries: 1024 (order: 5, 131072 bytes) 2411 [ 0.144078] xor: measuring software checksum speed 2412 [ 0.176236] 8regs : 1933.200 MB/sec 2413 [ 0.209615] 8regs_prefetch: 1720.800 MB/sec 2414 [ 0.243003] 32regs : 2287.200 MB/sec 2415 [ 0.276391] 32regs_prefetch: 1935.600 MB/sec 2416 [ 0.276396] xor: using function: 32regs (2287.200 MB/sec) 2417 [ 0.276457] atomic64_test: passed 2418 [ 0.276463] pinctrl core: initialized pinctrl subsystem 2419 [ 0.277631] NET: Registered protocol family 16 2420 [ 0.278774] dump_class_init,861, success 2421 [ 0.293110] cpuidle: using governor menu 2422 [ 0.294521] sunxi iommu: irq = 8 2423 [ 0.294837] vdso: 2 pages (1 code @ ffffff8008daf000, 1 data @ ffffff800972c000) 2424 [ 0.294855] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. 2425 [ 0.296242] DMA: preallocated 256 KiB pool for atomic allocations 2426 [ 0.297632] sun50iw9p1-r-pinctrl r_pio: initialized sunXi PIO driver 2427 [ 0.311994] sun50iw9p1-pinctrl pio: initialized sunXi PIO driver 2428 [ 0.316021] iommu: Adding device 1c0e000.ve to group 0 2429 [ 0.316543] iommu: Adding device 1c00000.vp9 to group 0 2430 [ 0.328258] iommu: Adding device 1000000.disp to group 0 2431 [ 0.329710] iommu: Adding device 1480000.g2d to group 0 2432 [ 0.332989] iommu: Adding device csi0 to group 0 2433 [ 0.333518] iommu: Adding device csi1 to group 0 2434 [ 0.334714] iommu: Adding device 6600800.vind:scaler@0 to group 0 2435 [ 0.335018] iommu: Adding device 6600800.vind:scaler@1 to group 0 2436 [ 0.335334] iommu: Adding device 6600800.vind:scaler@2 to group 0 2437 [ 0.335638] iommu: Adding device 6600800.vind:scaler@3 to group 0 2438 [ 0.335948] iommu: Adding device 6600800.vind:scaler@4 to group 0 2439 [ 0.336250] iommu: Adding device 6600800.vind:scaler@5 to group 0 2440 [ 0.337321] iommu: Adding device vinc0 to group 0 2441 [ 0.337809] iommu: Adding device vinc1 to group 0 2442 [ 0.339300] iommu: Adding device 1420000.deinterlace to group 0 2443 [ 0.381178] HugeTLB registered 2 MB page size, pre-allocated 0 pages 2444 [ 0.437369] raid6: int64x1 gen() 391 MB/s 2445 [ 0.494025] raid6: int64x1 xor() 362 MB/s 2446 [ 0.550749] raid6: int64x2 gen() 590 MB/s 2447 [ 0.607545] raid6: int64x2 xor() 512 MB/s 2448 [ 0.664291] raid6: int64x4 gen() 840 MB/s 2449 [ 0.721006] raid6: int64x4 xor() 629 MB/s 2450 [ 0.777779] raid6: int64x8 gen() 964 MB/s 2451 [ 0.834480] raid6: int64x8 xor() 655 MB/s 2452 [ 0.891289] raid6: neonx1 gen() 648 MB/s 2453 [ 0.947984] raid6: neonx1 xor() 641 MB/s 2454 [ 1.004732] raid6: neonx2 gen() 976 MB/s 2455 [ 1.061457] raid6: neonx2 xor() 819 MB/s 2456 [ 1.118189] raid6: neonx4 gen() 1286 MB/s 2457 [ 1.174947] raid6: neonx4 xor() 965 MB/s 2458 [ 1.231666] raid6: neonx8 gen() 1323 MB/s 2459 [ 1.288431] raid6: neonx8 xor() 984 MB/s 2460 [ 1.288437] raid6: using algorithm neonx8 gen() 1323 MB/s 2461 [ 1.288442] raid6: .... xor() 984 MB/s, rmw enabled 2462 [ 1.288447] raid6: using intx1 recovery algorithm 2463 [ 1.288624] pwm module init! 2464 [ 1.292929] sunxi-pm debug v3.10 2465 [ 1.294013] SCSI subsystem initialized 2466 [ 1.294627] sunxi_spi_probe()2299 - [spi0] SPI MASTER MODE 2467 [ 1.294705] sunxi_spi_request_gpio()1927 - [spi0] Pinctrl init spi0 2468 [ 1.294822] sunxi_spi_clk_init()1977 - [spi0] mclk 100000000 2469 [ 1.295322] spi spi0: master is unqueued, this is deprecated 2470 [ 1.295630] sunxi_spi_probe()2379 - [spi0]: driver probe succeed, base ffffff8008066000, irq 294 2471 [ 1.296201] sunxi_spi_probe()2299 - [spi1] SPI MASTER MODE 2472 [ 1.296283] sunxi_spi_request_gpio()1927 - [spi1] Pinctrl init spi1 2473 [ 1.296400] sunxi_spi_clk_init()1977 - [spi1] mclk 100000000 2474 [ 1.296844] spi spi1: master is unqueued, this is deprecated 2475 [ 1.297148] sunxi_spi_probe()2379 - [spi1]: driver probe succeed, base ffffff8008068000, irq 295 2476 [ 1.297931] usbcore: registered new interface driver usbfs 2477 [ 1.298022] usbcore: registered new interface driver hub 2478 [ 1.298095] usbcore: registered new device driver usb 2479 [ 1.298376] sunxi_i2c_adap_init()2522 - init 2480 [ 1.298937] sunxi_i2c_probe()2208 - [i2c3] warning: failed to get regulator id 2481 [ 1.299028] sunxi_i2c_probe()2270 - [i2c3] twi_drv_used = 0 2482 [ 1.299036] sunxi_i2c_probe()2274 - [i2c3] twi_pkt_interval = 0 2483 [ 1.299051] twi3 supply twi not found, using dummy regulator 2484 [ 1.299127] twi_request_gpio()451 - [i2c3] init name: twi3 2485 [ 1.299888] sunxi_i2c_probe()2208 - [i2c5] warning: failed to get regulator id 2486 [ 1.299967] sunxi_i2c_probe()2270 - [i2c5] twi_drv_used = 0 2487 [ 1.299974] sunxi_i2c_probe()2274 - [i2c5] twi_pkt_interval = 0 2488 [ 1.299990] twi5 supply twi not found, using dummy regulator 2489 [ 1.300065] twi_request_gpio()451 - [i2c5] init name: twi5 2490 [ 1.300552] axp20x-i2c 5-0036: AXP20x variant AXP806 found 2491 [ 1.319041] random: fast init done 2492 [ 1.330217] axp20x-i2c 5-0036: AXP20X driver loaded 2493 [ 1.330704] media: Linux media interface: v0.10 2494 [ 1.330790] Linux video capture interface: v2.00 2495 [ 1.331581] Advanced Linux Sound Architecture Driver Initialized. 2496 [ 1.332328] Bluetooth: Core ver 2.22 2497 [ 1.332427] NET: Registered protocol family 31 2498 [ 1.332433] Bluetooth: HCI device and connection manager initialized 2499 [ 1.332451] Bluetooth: HCI socket layer initialized 2500 [ 1.332463] Bluetooth: L2CAP socket layer initialized 2501 [ 1.332502] Bluetooth: SCO socket layer initialized 2502 [ 1.338283] [DISP]disp_module_init 2503 [ 1.339468] [DISP] parser_disp_init_para,line:1403: 2504 [ 1.339477] of_property_read fb0_width fail 2505 [ 1.339488] [DISP] disp_init,line:2215: 2506 [ 1.339494] smooth display screen:0 type:4 mode:10 2507 [ 1.356890] [DISP]disp_module_init finish 2508 [ 1.357753] clocksource: Switched to clocksource arch_sys_counter 2509 [ 1.357992] VFS: Disk quotas dquot_6.6.0 2510 [ 1.358136] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 2511 [ 1.358889] Console: switching to colour frame buffer device 240x67 2512 [ 1.402311] NET: Registered protocol family 2 2513 [ 1.402441] IP idents hash table entries: 16384 (order: 5, 131072 bytes) 2514 [ 1.414671] TCP established hash table entries: 8192 (order: 4, 65536 bytes) 2515 [ 1.414744] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) 2516 [ 1.414866] TCP: Hash tables configured (established 8192 bind 8192) 2517 [ 1.414952] UDP hash table entries: 512 (order: 2, 16384 bytes) 2518 [ 1.414982] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) 2519 [ 1.415288] NET: Registered protocol family 1 2520 [ 1.415831] RPC: Registered named UNIX socket transport module. 2521 [ 1.415836] RPC: Registered udp transport module. 2522 [ 1.415839] RPC: Registered tcp transport module. 2523 [ 1.415842] RPC: Registered tcp NFSv4.1 backchannel transport module. 2524 [ 1.416090] Trying to unpack rootfs image as initramfs... 2525 [ 2.170062] Freeing initrd memory: 17256K 2526 [ 2.171184] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available 2527 [ 2.175097] audit: initializing netlink subsys (disabled) 2528 [ 2.175153] audit: type=2000 audit(2.170:1): initialized 2529 [ 2.176062] workingset: timestamp_bits=45 max_order=18 bucket_order=0 2530 [ 2.187177] DLM installed 2531 [ 2.189044] squashfs: version 4.0 (2009/01/31) Phillip Lougher 2532 [ 2.189384] Registering sdcardfs 0.1 2533 [ 2.189856] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 2534 [ 2.191393] ntfs: driver 2.1.32 [Flags: R/W]. 2535 [ 2.197821] NET: Registered protocol family 38 2536 [ 2.198201] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) 2537 [ 2.198330] io scheduler noop registered 2538 [ 2.198338] io scheduler deadline registered 2539 [ 2.198506] io scheduler cfq registered (default) 2540 [ 2.200317] failed to get easy_light_used assign 2541 [ 2.200328] failed to get normal led pin assign 2542 [ 2.200333] failed to get standby led pin assign 2543 [ 2.200338] failed to get standby led pin assign 2544 [ 2.200343] these is zero number for gpio 2545 [ 2.200347] gpio_init finish with uesd 2546 [ 2.203754] uart uart0: get regulator failed 2547 [ 2.203954] uart0: ttyS0 at MMIO 0x5000000 (irq = 280, base_baud = 1500000) is a SUNXI 2548 [ 2.203975] sw_console_setup()1706 - console setup baud 115200 parity n bits 8, flow n 2549 [ 2.204067] console [ttyS0] enabled 2550 [ 2.204950] uart uart1: get regulator failed 2551 [ 2.205145] uart1: ttyS1 at MMIO 0x5000400 (irq = 281, base_baud = 1500000) is a SUNXI 2552 [ 2.205881] uart uart5: get regulator failed 2553 [ 2.206067] uart5: ttyS5 at MMIO 0x5001400 (irq = 282, base_baud = 1500000) is a SUNXI 2554 [ 2.207328] misc dump reg init 2555 [ 2.208772] deinterlace 1420000.deinterlace: version[1.0.0], ip=0x300100 2556 [ 2.209114] Unable to detect cache hierarchy for CPU 0 2557 [ 2.223698] brd: module loaded 2558 [ 2.231879] loop: module loaded 2559 [ 2.232069] [NAND][NE] Not found valid nand node on dts 2560 [ 2.232664] Get boot type cmd line fail 2561 [ 2.233251] sunxi-bt soc@03000000:bt: Missing bt_power. 2562 [ 2.233261] sunxi-bt soc@03000000:bt: bt_power_name ((null)) 2563 [ 2.233268] sunxi-bt soc@03000000:bt: Missing bt_io_regulator. 2564 [ 2.233275] sunxi-bt soc@03000000:bt: io_regulator_name ((null)) 2565 [ 2.233333] sunxi-bt soc@03000000:bt: bt_rst gpio=211 mul-sel=1 pull=-1 drv_level=-1 data=0 2566 [ 2.233404] sunxi-bt soc@03000000:bt: devm_pinctrl_get() failed! 2567 [ 2.234235] sunxi-wlan soc@03000000:wlan: wlan_busnum (1) 2568 [ 2.234247] sunxi-wlan soc@03000000:wlan: Missing wlan_power. 2569 [ 2.234255] sunxi-wlan soc@03000000:wlan: wlan_power_name ((null)) 2570 [ 2.234262] sunxi-wlan soc@03000000:wlan: Missing wlan_io_regulator. 2571 [ 2.234269] sunxi-wlan soc@03000000:wlan: io_regulator_name ((null)) 2572 [ 2.234300] sunxi-wlan soc@03000000:wlan: wlan_regon gpio=210 mul-sel=1 pull=-1 drv_level=-1 data=0 2573 [ 2.234341] sunxi-wlan soc@03000000:wlan: get gpio chip_en failed 2574 [ 2.234349] sunxi-wlan soc@03000000:wlan: get gpio power_en failed 2575 [ 2.234367] sunxi-wlan soc@03000000:wlan: wlan_hostwake gpio=207 mul-sel=6 pull=-1 drv_level=-1 data=0 2576 [ 2.235492] [ADDR_MGT] addr_mgt_probe: success. 2577 [ 2.242110] tun: Universal TUN/TAP device driver, 1.6 2578 [ 2.242120] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 2579 [ 2.244105] gmac-power0: NULL 2580 [ 2.244115] gmac-power1: NULL 2581 [ 2.244121] gmac-power2: NULL 2582 [ 2.245221] PPP generic driver version 2.4.2 2583 [ 2.245504] PPP BSD Compression module registered 2584 [ 2.245515] PPP Deflate Compression module registered 2585 [ 2.245540] PPP MPPE Compression module registered 2586 [ 2.245550] NET: Registered protocol family 24 2587 [ 2.245582] PPTP driver version 0.8.5 2588 [ 2.245943] usbcore: registered new interface driver r8152 2589 [ 2.246022] usbcore: registered new interface driver asix 2590 [ 2.246115] usbcore: registered new interface driver ax88179_178a 2591 [ 2.246187] usbcore: registered new interface driver cdc_ether 2592 [ 2.246250] usbcore: registered new interface driver net1080 2593 [ 2.246314] usbcore: registered new interface driver cdc_subset 2594 [ 2.246385] usbcore: registered new interface driver zaurus 2595 [ 2.246477] usbcore: registered new interface driver cdc_ncm 2596 [ 2.246484] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 2597 [ 2.246843] get drv_vbus is fail, 84 2598 [ 2.246852] get ehci0-controller, regulator_io is no nocare 2599 [ 2.247115] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffff800992ac30, 0x:ffffff80081c1000, irq_no:11e 2600 [ 2.247121] [sunxi-ehci0]: Not init ehci0 2601 [ 2.247248] get ehci1-controller, regulator_io is no nocare 2602 [ 2.247431] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xffffff800992a8e8, 0x:ffffff80081c5000, irq_no:120 2603 [ 2.247488] sunxi-ehci 5200000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 2604 [ 2.247515] sunxi-ehci 5200000.ehci1-controller: new USB bus registered, assigned bus number 1 2605 [ 2.248121] sunxi-ehci 5200000.ehci1-controller: irq 288, io mem 0xffffff80081c5000 2606 [ 2.261108] sunxi-ehci 5200000.ehci1-controller: USB 0.0 started, EHCI 1.00 2607 [ 2.261394] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 2608 [ 2.261403] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2609 [ 2.261411] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 2610 [ 2.261418] usb usb1: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 2611 [ 2.261425] usb usb1: SerialNumber: sunxi-ehci 2612 [ 2.262279] hub 1-0:1.0: USB hub found 2613 [ 2.262325] hub 1-0:1.0: 1 port detected 2614 [ 2.263019] get drv_vbus is fail, 84 2615 [ 2.263027] get ehci2-controller, regulator_io is no nocare 2616 [ 2.263264] [sunxi-ehci2]: probe, pdev->name: 5310000.ehci2-controller, sunxi_ehci: 0xffffff800992a5a0, 0x:ffffff80081cf000, irq_no:122 2617 [ 2.263314] sunxi-ehci 5310000.ehci2-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 2618 [ 2.263339] sunxi-ehci 5310000.ehci2-controller: new USB bus registered, assigned bus number 2 2619 [ 2.263631] sunxi-ehci 5310000.ehci2-controller: irq 290, io mem 0xffffff80081cf000 2620 [ 2.274444] sunxi-ehci 5310000.ehci2-controller: USB 0.0 started, EHCI 1.00 2621 [ 2.274652] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 2622 [ 2.274661] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2623 [ 2.274668] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 2624 [ 2.274675] usb usb2: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 2625 [ 2.274682] usb usb2: SerialNumber: sunxi-ehci 2626 [ 2.275540] hub 2-0:1.0: USB hub found 2627 [ 2.275583] hub 2-0:1.0: 1 port detected 2628 [ 2.276255] get drv_vbus is fail, 84 2629 [ 2.276263] get ehci3-controller, regulator_io is no nocare 2630 [ 2.276507] [sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffff800992a258, 0x:ffffff80081d9000, irq_no:124 2631 [ 2.276558] sunxi-ehci 5311000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 2632 [ 2.276586] sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 3 2633 [ 2.276883] sunxi-ehci 5311000.ehci3-controller: irq 292, io mem 0xffffff80081d9000 2634 [ 2.287763] sunxi-ehci 5311000.ehci3-controller: USB 0.0 started, EHCI 1.00 2635 [ 2.287950] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 2636 [ 2.287959] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2637 [ 2.287966] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 2638 [ 2.287974] usb usb3: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 2639 [ 2.287980] usb usb3: SerialNumber: sunxi-ehci 2640 [ 2.288840] hub 3-0:1.0: USB hub found 2641 [ 2.288883] hub 3-0:1.0: 1 port detected 2642 [ 2.289803] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 2643 [ 2.290200] get drv_vbus is fail, 84 2644 [ 2.290208] get ohci0-controller, regulator_io is no nocare 2645 [ 2.290541] [sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffff800992b950 2646 [ 2.290546] [sunxi-ohci0]: Not init ohci0 2647 [ 2.290664] get ohci1-controller, regulator_io is no nocare 2648 [ 2.290836] hci: request ohci1-controller gpio:80 2649 [ 2.290912] [sunxi-ohci1]: probe, pdev->name: 5200000.ohci1-controller, sunxi_ohci: 0xffffff800992b608 2650 [ 2.290964] sunxi-ohci 5200000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 2651 [ 2.290989] sunxi-ohci 5200000.ohci1-controller: new USB bus registered, assigned bus number 4 2652 [ 2.291111] sunxi-ohci 5200000.ohci1-controller: irq 289, io mem 0x00000000 2653 [ 2.351931] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 2654 [ 2.351941] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2655 [ 2.351948] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 2656 [ 2.351956] usb usb4: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 2657 [ 2.351963] usb usb4: SerialNumber: sunxi-ohci 2658 [ 2.352841] hub 4-0:1.0: USB hub found 2659 [ 2.352886] hub 4-0:1.0: 1 port detected 2660 [ 2.353559] get drv_vbus is fail, 84 2661 [ 2.353568] get ohci2-controller, regulator_io is no nocare 2662 [ 2.353898] [sunxi-ohci2]: probe, pdev->name: 5310000.ohci2-controller, sunxi_ohci: 0xffffff800992b2c0 2663 [ 2.353953] sunxi-ohci 5310000.ohci2-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 2664 [ 2.353978] sunxi-ohci 5310000.ohci2-controller: new USB bus registered, assigned bus number 5 2665 [ 2.354069] sunxi-ohci 5310000.ohci2-controller: irq 291, io mem 0x00000000 2666 [ 2.411931] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 2667 [ 2.411941] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2668 [ 2.411948] usb usb5: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 2669 [ 2.411956] usb usb5: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 2670 [ 2.411963] usb usb5: SerialNumber: sunxi-ohci 2671 [ 2.412833] hub 5-0:1.0: USB hub found 2672 [ 2.412878] hub 5-0:1.0: 1 port detected 2673 [ 2.413565] get drv_vbus is fail, 84 2674 [ 2.413573] get ohci3-controller, regulator_io is no nocare 2675 [ 2.413910] [sunxi-ohci3]: probe, pdev->name: 5311000.ohci3-controller, sunxi_ohci: 0xffffff800992af78 2676 [ 2.413960] sunxi-ohci 5311000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 2677 [ 2.413986] sunxi-ohci 5311000.ohci3-controller: new USB bus registered, assigned bus number 6 2678 [ 2.414065] sunxi-ohci 5311000.ohci3-controller: irq 293, io mem 0x00000000 2679 [ 2.471929] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 2680 [ 2.471939] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 2681 [ 2.471947] usb usb6: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 2682 [ 2.471954] usb usb6: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 2683 [ 2.471961] usb usb6: SerialNumber: sunxi-ohci 2684 [ 2.472806] hub 6-0:1.0: USB hub found 2685 [ 2.472849] hub 6-0:1.0: 1 port detected 2686 [ 2.473771] ohci-platform: OHCI generic platform driver 2687 [ 2.474527] usbcore: registered new interface driver uas 2688 [ 2.474694] usbcore: registered new interface driver usb-storage 2689 [ 2.474789] usbcore: registered new interface driver ums-alauda 2690 [ 2.474870] usbcore: registered new interface driver ums-cypress 2691 [ 2.474939] usbcore: registered new interface driver ums-datafab 2692 [ 2.475007] usbcore: registered new interface driver ums_eneub6250 2693 [ 2.475076] usbcore: registered new interface driver ums-freecom 2694 [ 2.475158] usbcore: registered new interface driver ums-isd200 2695 [ 2.475234] usbcore: registered new interface driver ums-jumpshot 2696 [ 2.475307] usbcore: registered new interface driver ums-karma 2697 [ 2.475380] usbcore: registered new interface driver ums-onetouch 2698 [ 2.475481] usbcore: registered new interface driver ums-realtek 2699 [ 2.475559] usbcore: registered new interface driver ums-sddr09 2700 [ 2.475631] usbcore: registered new interface driver ums-sddr55 2701 [ 2.475702] usbcore: registered new interface driver ums-usbat 2702 [ 2.475853] usb_serial_number:20080411 2703 [ 2.477083] input: sunxi-keyboard as /devices/virtual/input/input0 2704 [ 2.477700] usbcore: registered new interface driver xpad 2705 [ 2.477853] usbcore: registered new interface driver usb_acecad 2706 [ 2.477944] usbcore: registered new interface driver aiptek 2707 [ 2.478024] usbcore: registered new interface driver gtco 2708 [ 2.478124] usbcore: registered new interface driver hanwang 2709 [ 2.478201] usbcore: registered new interface driver kbtab 2710 [ 2.478668] axp2101_pek: axp2101-pek can not register without irq 2711 [ 2.478691] axp2101-pek: probe of axp2101-pek.0 failed with error -22 2712 [ 2.480181] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0 2713 [ 2.480245] sunxi-rtc rtc: RTC enabled 2714 [ 2.480724] i2c /dev entries driver 2715 [ 2.481555] lirc_dev: IR Remote Control driver registered, major 244 2716 [ 2.481567] IR NEC protocol handler initialized 2717 [ 2.481573] IR RC5(x/sz) protocol handler initialized 2718 [ 2.481579] IR RC6 protocol handler initialized 2719 [ 2.481585] IR JVC protocol handler initialized 2720 [ 2.481590] IR Sony protocol handler initialized 2721 [ 2.481596] IR SANYO protocol handler initialized 2722 [ 2.481602] IR Sharp protocol handler initialized 2723 [ 2.481608] IR MCE Keyboard/mouse protocol handler initialized 2724 [ 2.481614] IR LIRC bridge handler initialized 2725 [ 2.481619] IR XMP protocol handler initialized 2726 [ 2.482153] sunxi_ir_startup: get ir protocol failed 2727 [ 2.482194] 7040000.s_cir supply ir0 not found, using dummy regulator 2728 [ 2.482379] Registered IR keymap rc_map_sunxi 2729 [ 2.482775] input: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0/input1 2730 [ 2.483007] rc rc0: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0 2731 [ 2.483989] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input2 2732 [ 2.484611] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-rc-recv) registered at minor = 0 2733 [ 2.485311] sunxi cedar version 0.1 2734 [ 2.485516] VE: install start!!! 2735 2736 [ 2.485702] cedar_ve: cedar-ve the get irq is 278 2737 [ 2.486319] VE: get debugfs_mpp_root is NULL, please check mpp 2738 2739 [ 2.486334] VE: sunxi ve debug register driver failed! 2740 2741 [ 2.489573] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) 2742 [ 2.490885] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com 2743 [ 2.491279] Bluetooth: HCI UART driver ver 2.3 2744 [ 2.491291] Bluetooth: HCI UART protocol H4 registered 2745 [ 2.491297] Bluetooth: HCI UART protocol LL registered 2746 [ 2.491302] Bluetooth: HCI UART protocol Three-wire (H5) registered 2747 [ 2.495501] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 2748 [ 2.495517] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 2749 [ 2.495530] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 2750 [ 2.495542] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 2751 [ 2.495555] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 2752 [ 2.495572] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 2753 [ 2.495970] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 2754 [ 2.496084] sunxi-mmc sdc0: ***ctl-spec-caps*** 8 2755 [ 2.496282] sunxi-mmc sdc0: No vmmc regulator found 2756 [ 2.496289] sunxi-mmc sdc0: No vqmmc regulator found 2757 [ 2.496295] sunxi-mmc sdc0: No vdmmc regulator found 2758 [ 2.496301] sunxi-mmc sdc0: No vd33sw regulator found 2759 [ 2.496308] sunxi-mmc sdc0: No vd18sw regulator found 2760 [ 2.496314] sunxi-mmc sdc0: No vq33sw regulator found 2761 [ 2.496320] sunxi-mmc sdc0: No vq18sw regulator found 2762 [ 2.497017] sunxi-mmc sdc0: set host busy 2763 [ 2.497119] sunxi-mmc sdc0: Got CD GPIO 2764 [ 2.497501] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 2765 [ 2.497535] sunxi-mmc sdc0: no vqmmc,Check if there is regulator 2766 [ 2.511099] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 2767 [ 2.528131] sunxi-mmc sdc0: detmode:gpio irq 2768 [ 2.528165] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 2769 [ 2.530678] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 2770 [ 2.532042] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 2771 [ 2.532176] sunxi-mmc sdc1: ***ctl-spec-caps*** 8 2772 [ 2.532317] sunxi-mmc sdc1: No vmmc regulator found 2773 [ 2.532324] sunxi-mmc sdc1: No vqmmc regulator found 2774 [ 2.532330] sunxi-mmc sdc1: No vdmmc regulator found 2775 [ 2.532336] sunxi-mmc sdc1: No vd33sw regulator found 2776 [ 2.532342] sunxi-mmc sdc1: No vd18sw regulator found 2777 [ 2.532349] sunxi-mmc sdc1: No vq33sw regulator found 2778 [ 2.532355] sunxi-mmc sdc1: No vq18sw regulator found 2779 [ 2.532736] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 2780 [ 2.533061] sunxi-mmc sdc1: set host busy 2781 [ 2.533143] mmc:failed to get gpios 2782 [ 2.533427] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 2783 [ 2.535221] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 2784 [ 2.547830] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 2785 [ 2.558892] mmc0: host does not support reading read-only switch, assuming write-enable 2786 [ 2.560754] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 2787 [ 2.560830] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 2788 [ 2.560973] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B 2789 [ 2.561064] mmc0: new high speed SDXC card at address 0001 2790 [ 2.562158] mmcblk0: mmc0:0001 SD16G 59.5 GiB 2791 [ 2.563656] mmcblk0: p1 2792 [ 2.564494] sunxi-mmc sdc1: detmode:manually by software 2793 [ 2.566675] ledtrig-cpu: registered to indicate activity on CPUs 2794 [ 2.567419] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 2795 [ 2.568269] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 2796 [ 2.568310] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 2797 [ 2.570817] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 2798 [ 2.572739] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 2799 [ 2.573579] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 2800 [ 2.574441] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 2801 [ 2.574713] sunxi_emce_hw_init()368Unable to get pclk, return fffffffe 2802 [ 2.574720] sunxi_emce_probe()590emce hw init failed! 2803 [ 2.574746] emce: probe of emce failed with error -2 2804 [ 2.575045] hidraw: raw HID events driver (C) Jiri Kosina 2805 [ 2.575289] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 2806 [ 2.575327] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B 2807 [ 2.580189] usbcore: registered new interface driver usbhid 2808 [ 2.580198] usbhid: USB HID core driver 2809 [ 2.581715] optee: probing for conduit method from DT. 2810 [ 2.581728] optee: api uid mismatch 2811 [ 2.582253] usbcore: registered new interface driver snd-usb-audio 2812 [ 2.583847] [sunxi_hdmi_codec_init] driver and deivce register finished. 2813 [ 2.585637] [sunxi_internal_codec_probe]:get audio avcc failed 2814 [ 2.585677] [sunxi_internal_codec_probe]:get audio vcc3v3-audio failed 2815 [ 2.585942] lineout_vol:26, linein_gain:3, fmin_gain:3, digital_vol:0, adcdrc_cfg:0, adchpf_cfg:0, dacdrc_cfg:0, dachpf_cfg:0, ramp_func_used:1, pa_msleep_time:100, pa_ctl_level:1, gpio-spk:0 2816 [ 2.588500] sunxi-codec-machine sndcodec: sun50iw9-codec <-> cpudai mapping ok 2817 [ 2.590538] sndhdmi sndhdmi: ASoC: CPU DAI (null) not registered 2818 [ 2.590551] sndhdmi sndhdmi: snd_soc_register_card() failed: -517 2819 [ 2.592790] sunxi-ahub-cpudai 5097000.cpudai3-controller: ahub cpudai id invalid 2820 [ 2.592813] sunxi-ahub-cpudai: probe of 5097000.cpudai3-controller failed with error -22 2821 [ 2.596752] sndahub sndahub: sunxi-ahub-aif1 <-> 5097000.cpudai0-controller mapping ok 2822 [ 2.598160] sndahub sndahub: sunxi-ahub-aif2 <-> 5097000.cpudai1-controller mapping ok 2823 [ 2.600018] sndahub sndahub: sunxi-ahub-aif3 <-> 5097000.cpudai2-controller mapping ok 2824 [ 2.603083] pktgen: Packet Generator for packet performance testing. Version: 2.75 2825 [ 2.603504] u32 classifier 2826 [ 2.603511] Actions configured 2827 [ 2.603523] Netfilter messages via NETLINK v0.30. 2828 [ 2.603549] nfnl_acct: registering with nfnetlink. 2829 [ 2.603885] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) 2830 [ 2.604138] ctnetlink v0.93: registering with nfnetlink. 2831 [ 2.604987] xt_time: kernel timezone is -0000 2832 [ 2.605012] IPVS: Registered protocols (TCP, UDP) 2833 [ 2.605123] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) 2834 [ 2.605253] IPVS: Creating netns size=1928 id=0 2835 [ 2.605383] IPVS: ipvs loaded. 2836 [ 2.605391] IPVS: [rr] scheduler registered. 2837 [ 2.605488] ipip: IPv4 and MPLS over IPv4 tunneling driver 2838 [ 2.606202] gre: GRE over IPv4 demultiplexor driver 2839 [ 2.606212] ip_gre: GRE over IPv4 tunneling driver 2840 [ 2.607545] IPv4 over IPsec tunneling driver 2841 [ 2.608494] ip_tables: (C) 2000-2006 Netfilter Core Team 2842 [ 2.608770] arp_tables: arp_tables: (C) 2002 David S. Miller 2843 [ 2.608838] Initializing XFRM netlink socket 2844 [ 2.608870] IPsec XFRM device driver 2845 [ 2.609700] NET: Registered protocol family 10 2846 [ 2.611853] mip6: Mobile IPv6 2847 [ 2.611892] ip6_tables: (C) 2000-2006 Netfilter Core Team 2848 [ 2.613162] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver 2849 [ 2.615363] NET: Registered protocol family 17 2850 [ 2.615406] NET: Registered protocol family 15 2851 [ 2.615566] Bridge firewalling registered 2852 [ 2.615697] Bluetooth: RFCOMM TTY layer initialized 2853 [ 2.615713] Bluetooth: RFCOMM socket layer initialized 2854 [ 2.615745] Bluetooth: RFCOMM ver 1.11 2855 [ 2.615759] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 2856 [ 2.615764] Bluetooth: BNEP filters: protocol multicast 2857 [ 2.615778] Bluetooth: BNEP socket layer initialized 2858 [ 2.615784] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 2859 [ 2.615797] Bluetooth: HIDP socket layer initialized 2860 [ 2.615884] l2tp_core: L2TP core driver, V2.0 2861 [ 2.615900] l2tp_ppp: PPPoL2TP kernel driver, V2.0 2862 [ 2.615906] 8021q: 802.1Q VLAN Support v1.8 2863 [ 2.616104] sctp: Hash tables configured (bind 256/256) 2864 [ 2.616687] Key type dns_resolver registered 2865 [ 2.616828] Registered cp15_barrier emulation handler 2866 [ 2.616841] Registered setend emulation handler 2867 [ 2.617802] registered taskstats version 1 2868 [ 2.629196] zswap: default zpool zbud not available 2869 [ 2.629204] zswap: pool creation failed 2870 [ 2.632039] Btrfs loaded, crc32c=crc32c-arm64-hw 2871 [ 2.632775] HDMI 2.0 driver init start! 2872 [ 2.632791] boot_hdmi=true 2873 [ 2.633610] Can not find the node of esm 2874 [ 2.633629] ERROR: pinctrl_get for HDMI2.0 DDC fail 2875 [ 2.633715] Get hdmi_power0:vcc-hdmi 2876 [ 2.633754] 6000000.hdmi supply vcc-hdmi not found, using dummy regulator 2877 [ 2.633931] Get hdmi_power1:vdd-hdmi 2878 [ 2.633956] 6000000.hdmi supply vdd-hdmi not found, using dummy regulator 2879 [ 2.635580] hdmi_cec_init 2880 [ 2.636048] [DISP] disp_device_attached,line:146: 2881 [ 2.636057] attached ok, mgr0<-->device0, type=4 2882 [ 2.636067] [HDMI receive params]: tv mode: 0xa format:0x0 data bits:0x0 eotf:0x0 cs:0x0 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8 2883 [ 2.636080] [DISP] disp_hdmi_set_mode,line:648: 2884 [ 2.636084] hdmi_set_mode is null! 2885 [ 2.638146] HDMI2.0 module init end 2886 [ 2.649346] sunxi-thermal 5070400.thermal_sensor: avcc is not calibrated 2887 [ 2.652771] cpu cpu1: opp_list_debug_create_link: Failed to create link 2888 [ 2.652782] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12) 2889 [ 2.652814] cpu cpu2: opp_list_debug_create_link: Failed to create link 2890 [ 2.652822] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12) 2891 [ 2.652852] cpu cpu3: opp_list_debug_create_link: Failed to create link 2892 [ 2.652859] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12) 2893 [ 2.655207] sndhdmi sndhdmi: audiohdmi-dai <-> sunxi-ahub-cpu-aif1 mapping ok 2894 [ 2.656131] get det_vbus is fail, 84 2895 [ 2.656139] get id is fail, 84 2896 [ 2.656631] sunxi-rtc rtc: setting system clock to 2023-09-25 15:17:35 UTC (1695655055) 2897 [ 2.660427] ALSA device list: 2898 [ 2.660434] #0: audiocodec 2899 [ 2.660438] #1: sndahub 2900 [ 2.660441] #2: sndhdmi 2901 [ 2.662096] Freeing unused kernel memory: 3008K 2902 [ 2.708138] random: systemd-udevd: uninitialized urandom read (16 bytes read) 2903 [ 2.710072] random: systemd-udevd: uninitialized urandom read (16 bytes read) 2904 [ 2.713113] random: systemd-udevd: uninitialized urandom read (16 bytes read) 2905 [ 2.782119] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device connect 2906 [ 2.944603] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device disconnect 2907 [ 3.044494] HDMI cable is connected 2908 [ 3.294463] usb 4-1: new full-speed USB device number 2 using sunxi-ohci 2909 [ 3.514909] usb 4-1: New USB device found, idVendor=24ae, idProduct=2013 2910 [ 3.514918] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 2911 [ 3.514923] usb 4-1: Product: Rapoo 2.4G Wireless Device 2912 [ 3.514928] usb 4-1: Manufacturer: RAPOO 2913 [ 3.522735] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.0/0003:24AE:2013.0001/input/input3 2914 [ 3.523135] hid-generic 0003:24AE:2013.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input0 2915 [ 3.528604] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.1/0003:24AE:2013.0002/input/input4 2916 [ 3.585698] hid-generic 0003:24AE:2013.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input1 2917 [ 3.590146] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.2/0003:24AE:2013.0003/input/input5 2918 [ 3.646478] hid-generic 0003:24AE:2013.0003: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input2 2919 [ 4.191576] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) 2920 [ 5.116950] cgroup: cgroup2: unknown option "nsdelegate,memory_recursiveprot" 2921 [ 5.117505] cgroup: cgroup2: unknown option "nsdelegate" 2922 [ 5.137834] systemd[1]: systemd 252.12-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) 2923 [ 5.137866] systemd[1]: Detected architecture arm64. 2924 [ 5.139125] systemd[1]: Warning! Reported kernel version 4.9.318-legacy-sun50iw9 is older than systemd's required baseline kernel version 4.15. Your mileage may vary. 2925 [ 5.156504] systemd[1]: Hostname set to <opi>. 2926 [ 5.183760] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation 2927 [ 6.640306] (sd-execut[1458]: /usr/lib/systemd/system-generators/netplan failed with exit status 1. 2928 [ 6.827825] 2929 insmod_device_driver 2930 2931 [ 6.828068] device_chose finished 124! 2932 [ 7.127061] systemd[1]: /lib/systemd/system/hdmi-audio.service:10: Support for option SysVStartPriority= has been removed and it is ignored 2933 [ 7.365547] systemd[1]: Queued start job for default target graphical.target. 2934 [ 7.372711] systemd[1]: Created slice system-getty.slice - Slice /system/getty. 2935 [ 7.374948] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. 2936 [ 7.377204] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. 2937 [ 7.378599] systemd[1]: Created slice user.slice - User and Session Slice. 2938 [ 7.379271] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. 2939 [ 7.379830] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 2940 [ 7.380160] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. 2941 [ 7.380639] systemd[1]: Reached target slices.target - Slice Units. 2942 [ 7.380944] systemd[1]: Reached target swap.target - Swaps. 2943 [ 7.381324] systemd[1]: Reached target time-set.target - System Time Set. 2944 [ 7.381840] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. 2945 [ 7.398961] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket. 2946 [ 7.400065] systemd[1]: Listening on syslog.socket - Syslog Socket. 2947 [ 7.400994] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. 2948 [ 7.401758] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. 2949 [ 7.403353] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. 2950 [ 7.404341] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). 2951 [ 7.405470] systemd[1]: Listening on systemd-journald.socket - Journal Socket. 2952 [ 7.407607] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. 2953 [ 7.408607] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. 2954 [ 7.412518] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... 2955 [ 7.417120] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... 2956 [ 7.422120] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... 2957 [ 7.423287] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 2958 [ 7.424224] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). 2959 [ 7.432188] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... 2960 [ 7.437584] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... 2961 [ 7.443303] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... 2962 [ 7.449716] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... 2963 [ 7.457266] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 2964 [ 7.465871] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... 2965 [ 7.475426] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 2966 [ 7.488350] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... 2967 [ 7.495482] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 2968 [ 7.496895] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). 2969 [ 7.507167] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... 2970 [ 7.513093] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... 2971 [ 7.518779] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... 2972 [ 7.523221] fuse init (API version 7.26) 2973 [ 7.530103] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. 2974 [ 7.532552] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. 2975 [ 7.534813] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. 2976 [ 7.537693] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. 2977 [ 7.541476] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. 2978 [ 7.545846] systemd[1]: modprobe@configfs.service: Deactivated successfully. 2979 [ 7.547023] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. 2980 [ 7.549690] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 2981 [ 7.550392] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 2982 [ 7.552720] systemd[1]: modprobe@drm.service: Deactivated successfully. 2983 [ 7.553388] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. 2984 [ 7.562554] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 2985 [ 7.577023] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro 2986 [ 7.578523] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 2987 [ 7.602460] systemd[1]: modprobe@fuse.service: Deactivated successfully. 2988 [ 7.624772] fbtft: module is from the staging directory, the quality is unknown, you have been warned. 2989 [ 7.632528] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned. 2990 [ 7.633381] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 2991 [ 7.633393] spidev spi1.1: dh2228fv spi1.1 16777kHz 8 bits mode=0x00 2992 [ 7.633582] spidev spi1.1: Deleting spi1.1 2993 [ 7.634599] fbtft_device: GPIOS used by 'fb_st7735r': 2994 [ 7.634607] fbtft_device: 'reset' = GPIO73 2995 [ 7.634611] fbtft_device: 'dc' = GPIO70 2996 [ 7.634623] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 2997 [ 7.634629] spi spi1.1: fb_st7735r spi1.1 16000kHz 8 bits mode=0x00 2998 [ 7.638405] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. 2999 [ 7.656012] systemd[1]: modprobe@loop.service: Deactivated successfully. 3000 [ 7.656785] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 3001 [ 7.659107] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. 3002 [ 7.673950] WCN: marlin_init entry! 3003 [ 7.675259] WCN: marlin_parse_dt reset gpio=211 3004 [ 7.675269] WCN_ERR: gpio reset request err: 211 3005 [ 7.675274] WCN: wcn config bt wake host 3006 [ 7.675777] WCN: marlin_registsr_bt_wake bt_hostwake gpio=208 mul-sel=6 pull=-1 drv_level=-1 data=0 intnum=193 3007 [ 7.675923] WCN: wcn config wifi wake host 3008 [ 7.675946] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 3009 [ 7.679404] sdiohal:sdiohal_init ok 3010 [ 7.680423] WCN: marlin_probe ok! 3011 [ 7.689223] mtty_probe init device addr: 0xffffffc03b686f00 3012 [ 7.689416] -->rfkill_bluetooth_init 3013 [ 7.689618] <--rfkill_bluetooth_init 3014 [ 7.714683] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... 3015 [ 7.720905] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... 3016 [ 7.721982] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 3017 [ 7.732239] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... 3018 [ 7.733223] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 3019 [ 7.741392] WCN: start_marlin [MARLIN_WIFI] 3020 [ 7.741412] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 3021 [ 7.741416] WCN: the first power on start 3022 [ 7.747227] systemd[1]: Starting systemd-sysusers.service - Create System Users... 3023 [ 7.768939] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. 3024 [ 7.772395] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. 3025 [ 7.802956] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. 3026 [ 7.816492] systemd[1]: Finished systemd-sysusers.service - Create System Users. 3027 [ 7.845127] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... 3028 [ 7.857896] WCN: marlin chip en pull up 3029 [ 7.884532] sdiohal:sdiohal_scan_card 3030 [ 7.884553] sunxi-wlan soc@03000000:wlan: bus_index: 1 3031 [ 7.884614] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 3032 [ 7.904468] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3033 [ 7.921956] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 3034 [ 7.922803] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 3035 [ 7.922920] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3036 [ 7.925453] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3037 [ 7.928540] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3038 [ 7.940265] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. 3039 [ 7.942334] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. 3040 [ 7.944519] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3041 [ 7.948376] systemd[1]: Mounting tmp.mount - /tmp... 3042 [ 7.957194] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B 3043 [ 7.957973] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 3044 [ 7.958056] sunxi-mmc sdc1: sdc set ios:clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 3045 [ 7.958670] mmc1: new ultra high speed SDR104 SDIO card at address 8800 3046 [ 7.959237] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=150000000 3047 [ 7.959428] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 3048 [ 7.959447] WCN: marlin_scan_finish! 3049 [ 7.959450] sdiohal:probe ok 3050 [ 7.959497] sdiohal:scan end! 3051 [ 7.959503] WCN: then marlin start to download 3052 [ 7.959525] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! 3053 [ 7.980615] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... 3054 [ 7.985643] systemd[1]: Mounted tmp.mount - /tmp. 3055 [ 7.988355] systemd[1]: Reached target local-fs.target - Local File Systems. 3056 [ 7.993461] systemd[1]: Starting armbian-led-state.service - Armbian leds state... 3057 [ 7.998743] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config... 3058 [ 8.004337] systemd[1]: Starting console-setup.service - Set console font and keymap... 3059 [ 8.009607] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data... 3060 [ 8.020955] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 3061 [ 8.028067] systemd[1]: Starting ufw.service - Uncomplicated firewall... 3062 [ 8.031494] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices. 3063 [ 8.065241] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown... 3064 [ 8.077433] systemd[1]: Starting systemd-udev-settle.service - Wait for udev To Complete Device Initialization... 3065 [ 8.084326] systemd[1]: Finished console-setup.service - Set console font and keymap. 3066 [ 8.091032] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data. 3067 [ 8.097665] systemd[1]: Finished ufw.service - Uncomplicated firewall. 3068 [ 8.109390] WCN: combin_img 0 marlin_firmware_write finish and successful 3069 [ 8.109562] WCN: marlin_start_run read reset reg val:0x1 3070 [ 8.109566] WCN: after do marlin_start_run reset reg val:0x0 3071 [ 8.109773] WCN: s_marlin_bootup_time=8109768635 3072 [ 8.114785] WCN: clock mode: TSX 3073 [ 8.115021] WCN: marlin_write_cali_data sync init_state:0x1a0f50 3074 [ 8.141405] WCN: marlin_write_cali_data sync init_state:0x1a0f50 3075 [ 8.155222] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 3076 [ 8.157585] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 3077 [ 8.158802] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 3078 [ 8.162103] systemd[1]: Finished ifupdown-pre.service - Helper to synchronize boot up for ifupdown. 3079 [ 8.164954] systemd[1]: Received SIGRTMIN+20 from PID 1421 (plymouthd). 3080 [ 8.165457] systemd[1]: Reached target network-pre.target - Preparation for Network. 3081 [ 8.168116] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1 3082 [ 8.168126] WCN: sdio_config bt_wake_host trigger:[high] 3083 [ 8.168129] WCN: sdio_config irq:[inband] 3084 [ 8.168132] WCN: sdio_config wl_wake_host trigger:[high] 3085 [ 8.168138] WCN: sdio_config wake_host_level_duration_time:[20ms] 3086 [ 8.168142] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse] 3087 [ 8.168148] WCN: marlin_send_sdio_config_to_cp sdio_config:0xb8f01 (enable config) 3088 [ 8.168533] WCN: marlin_write_cali_data finish 3089 [ 8.168740] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 3090 [ 8.194691] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 3091 [ 8.212239] systemd[1]: Finished armbian-led-state.service - Armbian leds state. 3092 [ 8.221342] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 3093 [ 8.247979] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 3094 [ 8.274697] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 3095 [ 8.301395] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0 3096 [ 8.301405] WCN: marlin_bind_verify confuse data: 0x8badefa1b12bbe26aeffa8d1a5c07 3097 [ 8.301421] WCN: marlin_bind_verify verify data: 0xccd7f963c19581907680f88f2044f687 3098 [ 8.301957] WCN: check_cp_ready sync val:0xf0f0f0f7, prj_type val:0x0 3099 [ 8.328091] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0 3100 [ 8.328099] sdiohal:sdiohal_runtime_get entry 3101 [ 8.328272] WCN: get_cp2_version entry! 3102 [ 8.330032] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~ 3103 [ 8.330069] WCN: switch_cp2_log - close entry! 3104 [ 8.331459] WCN: WCND at cmd read:OK 3105 [ 8.331968] WCN: then marlin download finished and run ok 3106 [ 8.331979] WCN: start_loopcheck 3107 [ 8.345667] WCN: get_board_ant_num [one_ant] 3108 [ 8.345678] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini 3109 [ 8.406865] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings. 3110 [ 8.412188] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. 3111 [ 8.422605] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... 3112 [ 8.473090] zram: Added device: zram0 3113 [ 8.474165] zram: Added device: zram1 3114 [ 8.475510] zram: Added device: zram2 3115 [ 8.511484] zswap: can't enable, initialization failed 3116 [ 8.512812] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. 3117 [ 8.521326] systemd[1]: Starting networking.service - Raise network interfaces... 3118 [ 8.560988] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files. 3119 [ 8.574225] zram0: detected capacity change from 0 to 506396672 3120 [ 8.576780] systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen... 3121 [ 8.650334] fb_st7735r: module is from the staging directory, the quality is unknown, you have been warned. 3122 [ 8.663742] systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen. 3123 [ 8.666032] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 3124 [ 8.667282] systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch. 3125 [ 8.667702] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. 3126 [ 9.139019] systemd[1]: Finished networking.service - Raise network interfaces. 3127 [ 9.974376] graphics fb1: fb_st7735r frame buffer, 160x128, 40 KiB video memory, 4 KiB buffer memory, fps=20, spi1.1 at 16 MHz 3128 [ 10.034288] systemd[1]: Found device dev-ttyS0.device - /dev/ttyS0. 3129 [ 10.270974] systemd[1]: Reached target usb-gadget.target - Hardware activated USB gadget. 3130 [ 10.719968] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch. 3131 [ 10.731951] systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status... 3132 [ 10.797388] sunxi-bt soc@03000000:bt: set block: 0 3133 [ 10.820915] bluetooth_set_power: start_block=0 3134 [ 10.820927] WCN: start_marlin [MARLIN_BLUETOOTH] 3135 [ 10.820936] WCN: marlin power state:4, subsys: [MARLIN_BLUETOOTH] power 1 3136 [ 10.820941] WCN: marlin have open, GNSS is closed 3137 [ 10.820947] bluetooth_set_power: end_block=0 3138 [ 10.843784] systemd[1]: Started systemd-rfkill.service - Load/Save RF Kill Switch Status. 3139 [ 10.959171] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 3140 [ 10.959468] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 3141 [ 10.960277] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 3142 [ 10.966890] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 3143 [ 10.974768] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 3144 [ 10.983934] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 3145 [ 10.992794] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 3146 [ 10.997628] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 3147 [ 10.998777] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 3148 [ 11.003515] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 3149 [ 11.004860] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 3150 [ 11.009415] systemd[1]: modprobe@loop.service: Deactivated successfully. 3151 [ 11.010418] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 3152 [ 11.013885] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 3153 [ 11.014193] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 3154 [ 11.051694] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 3155 [ 11.052227] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 3156 [ 11.068227] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 3157 [ 11.070263] systemd[1]: Finished systemd-udev-settle.service - Wait for udev To Complete Device Initialization. 3158 [ 11.076378] systemd[1]: Starting brltty.service - Braille Device Support... 3159 [ 11.622057] Adding 494524k swap on /dev/zram0. Priority:5 extents:1 across:494524k SSFS 3160 [ 11.766120] zram1: detected capacity change from 0 to 52428800 3161 [ 11.821739] systemd[1]: Started brltty.service - Braille Device Support. 3162 [ 11.840742] input: BRLTTY 6.5 Linux Screen Driver Keyboard as /devices/virtual/input/input6 3163 [ 15.854019] systemd[1]: systemd-rfkill.service: Deactivated successfully. 3164 [ 15.869877] systemd[1]: Finished armbian-zram-config.service - Armbian ZRAM config. 3165 [ 15.898811] systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging... 3166 [ 15.959002] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard 3167 [ 19.658844] systemd[1]: Finished armbian-ramlog.service - Armbian memory supported logging. 3168 [ 19.665165] systemd[1]: Starting systemd-journald.service - Journal Service... 3169 [ 19.940069] systemd-journald[1922]: Data hash table of /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal has a fill level at 75.2 (1658 of 2204 items, 1269760 file size, 765 bytes per hash table item), suggesting rotation. 3170 [ 19.940091] systemd-journald[1922]: /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal: Journal header limits reached or header out-of-date, rotating. 3171 [ 19.947202] systemd[1]: Started systemd-journald.service - Journal Service. 3172 [ 19.993653] systemd-journald[1922]: Received client request to flush runtime journal. 3173 [ 20.245138] IPVS: Creating netns size=1928 id=1 3174 3175 ### armbian-release: 3176 3177 # PLEASE DO NOT EDIT THIS FILE 3178 BOARD=orangepizero2 3179 BOARD_NAME="Orange Pi Zero2" 3180 BOARDFAMILY=sun50iw9 3181 BUILD_REPOSITORY_URL=https://github.com/armbian/build 3182 BUILD_REPOSITORY_COMMIT=ac829eb6 3183 LINUXFAMILY=sun50iw9 3184 ARCH=arm64 3185 IMAGE_TYPE=stable 3186 BOARD_TYPE=conf 3187 INITRD_ARCH=arm 3188 KERNEL_IMAGE_TYPE=Image 3189 FORCE_BOOTSCRIPT_UPDATE=yes 3190 VENDOR=Armbian 3191 BOOTSCRIPT_FORCE_UPDATE="yes" 3192 BOOTSCRIPT_DST="boot.cmd" 3193 VERSION=23.8.1 3194 REVISION=23.8.1 3195 BRANCH=legacy 3196 3197 ### boot environment: 3198 3199 verbosity=1 3200 console=serial 3201 #disp_mode=1080p60 3202 #fb0_width=1280 3203 #fb0_height=720 3204 rootdev=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e 3205 rootfstype=ext4 3206 overlays=spi-spidev 3207 param_spidev_spi_bus=1 3208 param_spidev_spi_cs=1 3209 extraargs=fbcon=map:1 3210 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u 3211 3212 ### lsusb: 3213 3214 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 3215 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 3216 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 3217 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 3218 Bus 004 Device 002: ID 24ae:2013 Shenzhen Rapoo Technology Co., Ltd. Rapoo 2.4G Wireless Device 3219 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 3220 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 3221 3222 ### lscpu: 3223 3224 Architecture: aarch64 3225 CPU op-mode(s): 32-bit, 64-bit 3226 Byte Order: Little Endian 3227 CPU(s): 4 3228 On-line CPU(s) list: 0-3 3229 Vendor ID: ARM 3230 Model name: Cortex-A53 3231 Model: 4 3232 Thread(s) per core: 1 3233 Core(s) per cluster: 4 3234 Socket(s): - 3235 Cluster(s): 1 3236 Stepping: r0p4 3237 CPU(s) scaling MHz: 100% 3238 CPU max MHz: 1512.0000 3239 CPU min MHz: 480.0000 3240 BogoMIPS: 48.00 3241 Flags: fp asimd aes pmull sha1 sha2 crc32 3242 3243 ### cpuinfo: 3244 3245 processor : 0 3246 BogoMIPS : 48.00 3247 Features : fp asimd aes pmull sha1 sha2 crc32 3248 CPU implementer : 0x41 3249 CPU architecture: 8 3250 CPU variant : 0x0 3251 CPU part : 0xd03 3252 CPU revision : 4 3253 3254 processor : 1 3255 BogoMIPS : 48.00 3256 Features : fp asimd aes pmull sha1 sha2 crc32 3257 CPU implementer : 0x41 3258 CPU architecture: 8 3259 CPU variant : 0x0 3260 CPU part : 0xd03 3261 CPU revision : 4 3262 3263 processor : 2 3264 BogoMIPS : 48.00 3265 Features : fp asimd aes pmull sha1 sha2 crc32 3266 CPU implementer : 0x41 3267 CPU architecture: 8 3268 CPU variant : 0x0 3269 CPU part : 0xd03 3270 CPU revision : 4 3271 3272 processor : 3 3273 BogoMIPS : 48.00 3274 Features : fp asimd aes pmull sha1 sha2 crc32 3275 CPU implementer : 0x41 3276 CPU architecture: 8 3277 CPU variant : 0x0 3278 CPU part : 0xd03 3279 CPU revision : 4 3280 3281 3282 ### meminfo: 3283 3284 MemTotal: 989056 kB 3285 MemFree: 794528 kB 3286 MemAvailable: 885284 kB 3287 Buffers: 15604 kB 3288 Cached: 82092 kB 3289 SwapCached: 0 kB 3290 Active: 66392 kB 3291 Inactive: 53084 kB 3292 Active(anon): 21848 kB 3293 Inactive(anon): 656 kB 3294 Active(file): 44544 kB 3295 Inactive(file): 52428 kB 3296 Unevictable: 0 kB 3297 Mlocked: 0 kB 3298 SwapTotal: 494524 kB 3299 SwapFree: 494524 kB 3300 Dirty: 6072 kB 3301 Writeback: 0 kB 3302 AnonPages: 21644 kB 3303 Mapped: 24364 kB 3304 Shmem: 824 kB 3305 Slab: 33156 kB 3306 SReclaimable: 9216 kB 3307 SUnreclaim: 23940 kB 3308 KernelStack: 2560 kB 3309 PageTables: 1032 kB 3310 NFS_Unstable: 0 kB 3311 Bounce: 0 kB 3312 WritebackTmp: 0 kB 3313 CommitLimit: 989052 kB 3314 Committed_AS: 77888 kB 3315 VmallocTotal: 263061440 kB 3316 VmallocUsed: 0 kB 3317 VmallocChunk: 0 kB 3318 CmaTotal: 16384 kB 3319 CmaFree: 7468 kB 3320 HugePages_Total: 0 3321 HugePages_Free: 0 3322 HugePages_Rsvd: 0 3323 HugePages_Surp: 0 3324 Hugepagesize: 2048 kB 3325 3326 ### virtual memory: 3327 3328 vm.admin_reserve_kbytes = 8192 3329 vm.block_dump = 0 3330 vm.compact_unevictable_allowed = 1 3331 vm.dirty_background_bytes = 0 3332 vm.dirty_background_ratio = 10 3333 vm.dirty_bytes = 0 3334 vm.dirty_expire_centisecs = 3000 3335 vm.dirty_ratio = 20 3336 vm.dirtytime_expire_seconds = 43200 3337 vm.dirty_writeback_centisecs = 500 3338 vm.extfrag_threshold = 500 3339 vm.extra_free_kbytes = 0 3340 vm.hugepages_treat_as_movable = 0 3341 vm.hugetlb_shm_group = 0 3342 vm.laptop_mode = 0 3343 vm.legacy_va_layout = 0 3344 vm.lowmem_reserve_ratio = 256 32 3345 vm.max_map_count = 65530 3346 vm.min_free_kbytes = 3937 3347 vm.mmap_min_addr = 4096 3348 vm.mmap_rnd_bits = 18 3349 vm.mmap_rnd_compat_bits = 11 3350 vm.nr_hugepages = 0 3351 vm.nr_overcommit_hugepages = 0 3352 vm.nr_pdflush_threads = 0 3353 vm.oom_dump_tasks = 1 3354 vm.oom_kill_allocating_task = 0 3355 vm.overcommit_kbytes = 0 3356 vm.overcommit_memory = 0 3357 vm.overcommit_ratio = 50 3358 vm.page-cluster = 0 3359 vm.panic_on_oom = 0 3360 vm.percpu_pagelist_fraction = 0 3361 vm.stat_interval = 1 3362 vm.swappiness = 100 3363 vm.user_reserve_kbytes = 29999 3364 vm.vfs_cache_pressure = 100 3365 vm.watermark_scale_factor = 10 3366 3367 ### ip addr: 3368 3369 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 3370 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 3371 inet XXX.XXX.0.1/8 scope host lo 3372 valid_lft forever preferred_lft forever 3373 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 3374 link/ether a2:f9:75:52:ad:58 brd ff:ff:ff:ff:ff:ff 3375 3: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 3376 link/ether fa:6e:f4:da:68:8c brd ff:ff:ff:ff:ff:ff 3377 4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 3378 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 3379 5: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN group default qlen 1 3380 link/gre XXX.XXX.0.0 brd XXX.XXX.0.0 3381 6: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN group default qlen 1000 3382 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 3383 7: ip_vti0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 3384 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 3385 8: ip6_vti0@NONE: <NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1 3386 link/tunnel6 :: brd :: 3387 9: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 3388 link/sit XXX.XXX.0.0 brd XXX.XXX.0.0 3389 10: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN group default qlen 1 3390 link/tunnel6 :: brd :: 3391 11: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 3392 link/ether 48:c9:27:84:d1:40 brd ff:ff:ff:ff:ff:ff 3393 3394 ### partitions: 3395 3396 major minor #blocks name 3397 3398 179 0 62410752 mmcblk0 3399 179 1 61763584 mmcblk0p1 3400 253 0 494528 zram0 3401 253 1 51200 zram1 3402 3403 ### df: 3404 3405 udev 466M 0 466M 0% /dev 3406 tmpfs 97M 884K 96M 1% /run 3407 /dev/mmcblk0p1 58G 5.7G 52G 10% / 3408 tmpfs 483M 0 483M 0% /dev/shm 3409 tmpfs 5.0M 0 5.0M 0% /run/lock 3410 tmpfs 483M 4.0K 483M 1% /tmp 3411 /dev/zram1 47M 5.8M 38M 14% /var/log 3412 3413 ### lsblk: 3414 3415 NAME FSTYPE SIZE MOUNTPOINT UUID 3416 mmcblk0 59.5G 3417 └─mmcblk0p1 ext4 58.9G / 0c85f38a-a16e-49a0-a53c-99d9856e983e 3418 zram1 50M /var/log 3419 zram2 0B 3420 3421 ### zramctl: 3422 3423 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT 3424 /dev/zram1 lz4 50M 5.6M 1.6M 2M 4 /var/log 3425 /dev/zram0 lzo 482.9M 4K 76B 12K 4 [SWAP] 3426 3427 ### mtab: 3428 3429 /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 3430 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 3431 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 3432 3433 ### mmc0:0001 info: 3434 3435 manfid: 0x0000fe 3436 cid: fe3432534431364720000000690091f5 3437 fwrev: 0x0 3438 csd: 400e00325b590001dc277f800a40008b 3439 ocr: 0x00200000 3440 type: SD 3441 date: 01/2009 3442 hwrev: 0x2 3443 dsr: 0x404 3444 serial: 0x00000069 3445 erase_size: 512 3446 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SD16G MODALIAS=mmc:block 3447 ssr: 000000000800000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 3448 scr: 0285808300000000 3449 oemid: 0x3432 3450 preferred_erase_size: 4194304 3451 name: SD16G 3452 3453 ### Boot system health: 3454 3455 Time CPU load %cpu %sys %usr %nice %io %irq Tcpu C.St. 3456 12:17:55 1512 MHz 1.17 39% 19% 13% 0% 6% 0% 50.2 °C 0/5 3457 12:17:55 1512 MHz 1.17 92% 22% 22% 2% 45% 0% 50.2 °C 0/5 3458 12:17:56 1512 MHz 1.17 99% 40% 53% 1% 3% 0% 50.2 °C 0/5 3459 12:17:56 1512 MHz 1.17 100% 33% 59% 1% 5% 0% 49.4 °C 0/5 3460 12:17:57 1512 MHz 1.17 92% 23% 28% 0% 38% 0% 49.4 °C 0/5 3461 3462 ### Activated 1 lzo zram swap devices with 482MB each. 3463 ### Activated Armbian ramlog partition with lz4 compression 3464 3465 ### Activated 1 lzo zram swap devices with 482MB each. 3466 ### Activated Armbian ramlog partition with lz4 compression 3467 3468 Mon Sep 25 02:17:34 PM -03 2023 | Orange Pi Zero2 | 23.8.1 | arm64 | aarch64 | 4.9.318-legacy-sun50iw9 3469 3470 ### dmesg: 3471 3472 [ 0.000000] Booting Linux on physical CPU 0x0 3473 [ 0.000000] Linux version 4.9.318-legacy-sun50iw9 (armbian@next) (gcc version 11.4.0 (Ubuntu 11.4.0-1ubuntu1~22.04) ) #1 SMP PREEMPT Tue May 17 02:06:13 UTC 2022 3474 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] 3475 [ 0.000000] disp reserve base 0x7bf4fcc0 ,size 0x384000 3476 [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 3477 [ 0.000000] On node 0 totalpages: 262144 3478 [ 0.000000] DMA zone: 4096 pages used for memmap 3479 [ 0.000000] DMA zone: 0 pages reserved 3480 [ 0.000000] DMA zone: 262144 pages, LIFO batch:31 3481 [ 0.000000] psci: probing for conduit method from DT. 3482 [ 0.000000] psci: PSCIv1.0 detected in firmware. 3483 [ 0.000000] psci: Using standard PSCI v0.2 function IDs 3484 [ 0.000000] psci: Trusted OS migration not required 3485 [ 0.000000] psci: SMC Calling Convention v1.0 3486 [ 0.000000] percpu: Embedded 21 pages/cpu s45592 r8192 d32232 u86016 3487 [ 0.000000] pcpu-alloc: s45592 r8192 d32232 u86016 alloc=21*4096 3488 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 3489 [ 0.000000] Detected VIPT I-cache on CPU0 3490 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 3491 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258048 3492 [ 0.000000] Kernel command line: root=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e rootwait rootfstype=ext4 splash=verbose console=ttyS0,115200 consoleblank=0 loglevel=1 ubootpart=68ea14b7-01 disp_reserve=3686400,0x7bf4fcc0 fbcon=map:1 3493 [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes 3494 [ 0.000000] log_buf_len total cpu_extra contributions: 393216 bytes 3495 [ 0.000000] log_buf_len min size: 131072 bytes 3496 [ 0.000000] log_buf_len: 524288 bytes 3497 [ 0.000000] early log buf free: 129352(98%) 3498 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) 3499 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) 3500 [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) 3501 [ 0.000000] Memory: 952408K/1048576K available (11902K kernel code, 1476K rwdata, 6668K rodata, 3008K init, 674K bss, 79784K reserved, 16384K cma-reserved) 3502 [ 0.000000] Virtual kernel memory layout: 3503 [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) 3504 [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) 3505 [ 0.000000] .text : 0xffffff8008208000 - 0xffffff8008da8000 ( 11904 KB) 3506 [ 0.000000] .rodata : 0xffffff8008da8000 - 0xffffff8009438000 ( 6720 KB) 3507 [ 0.000000] .init : 0xffffff8009438000 - 0xffffff8009728000 ( 3008 KB) 3508 [ 0.000000] .data : 0xffffff8009728000 - 0xffffff8009899008 ( 1477 KB) 3509 [ 0.000000] .bss : 0xffffff8009899008 - 0xffffff8009941b94 ( 675 KB) 3510 [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) 3511 [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) 3512 [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) 3513 [ 0.000000] 0xffffffbf00000000 - 0xffffffbf01000000 ( 16 MB actual) 3514 [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB) 3515 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 3516 [ 0.000000] Preemptible hierarchical RCU implementation. 3517 [ 0.000000] Build-time adjustment of leaf fanout to 64. 3518 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 3519 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns 3520 [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt). 3521 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 3522 [ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 3523 [ 0.000223] Console: colour dummy device 80x25 3524 [ 0.000237] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) 3525 [ 0.000245] pid_max: default: 32768 minimum: 301 3526 [ 0.000441] Security Framework initialized 3527 [ 0.000449] AppArmor: AppArmor disabled by boot time parameter 3528 [ 0.000563] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) 3529 [ 0.000569] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) 3530 [ 0.001849] sched-energy: CPU device node has no sched-energy-costs 3531 [ 0.001863] Invalid sched_group_energy for CPU0 3532 [ 0.001871] CPU0: update cpu_capacity 1024 3533 [ 0.008959] ASID allocator initialised with 32768 entries 3534 [ 0.027939] BOOTEVENT: 27.924665: ON 3535 [ 0.055908] Detected VIPT I-cache on CPU1 3536 [ 0.055961] Invalid sched_group_energy for CPU1 3537 [ 0.055964] CPU1: update cpu_capacity 1024 3538 [ 0.055967] CPU1: Booted secondary processor [410fd034] 3539 [ 0.079292] Detected VIPT I-cache on CPU2 3540 [ 0.079328] Invalid sched_group_energy for CPU2 3541 [ 0.079331] CPU2: update cpu_capacity 1024 3542 [ 0.079334] CPU2: Booted secondary processor [410fd034] 3543 [ 0.102694] Detected VIPT I-cache on CPU3 3544 [ 0.102727] Invalid sched_group_energy for CPU3 3545 [ 0.102731] CPU3: update cpu_capacity 1024 3546 [ 0.102733] CPU3: Booted secondary processor [410fd034] 3547 [ 0.102813] Brought up 4 CPUs 3548 [ 0.102821] SMP: Total of 4 processors activated. 3549 [ 0.102829] CPU features: detected feature: 32-bit EL0 Support 3550 [ 0.102835] CPU features: detected feature: Kernel page table isolation (KPTI) 3551 [ 0.106604] CPU: All CPU(s) started at EL1 3552 [ 0.106626] alternatives: patching kernel code 3553 [ 0.106803] Invalid sched_group_energy for CPU3 3554 [ 0.106813] CPU3: update max cpu_capacity 1024 3555 [ 0.106818] Invalid sched_group_energy for Cluster3 3556 [ 0.106823] Invalid sched_group_energy for CPU2 3557 [ 0.106829] Invalid sched_group_energy for Cluster2 3558 [ 0.106834] Invalid sched_group_energy for CPU1 3559 [ 0.106840] Invalid sched_group_energy for Cluster1 3560 [ 0.106845] Invalid sched_group_energy for CPU0 3561 [ 0.106850] Invalid sched_group_energy for Cluster0 3562 [ 0.108277] devtmpfs: initialized 3563 [ 0.112711] CPU1: update max cpu_capacity 1024 3564 [ 0.143411] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns 3565 [ 0.143432] futex hash table entries: 1024 (order: 5, 131072 bytes) 3566 [ 0.144088] xor: measuring software checksum speed 3567 [ 0.176249] 8regs : 1933.200 MB/sec 3568 [ 0.209628] 8regs_prefetch: 1720.800 MB/sec 3569 [ 0.243016] 32regs : 2287.200 MB/sec 3570 [ 0.276403] 32regs_prefetch: 1935.600 MB/sec 3571 [ 0.276409] xor: using function: 32regs (2287.200 MB/sec) 3572 [ 0.276469] atomic64_test: passed 3573 [ 0.276476] pinctrl core: initialized pinctrl subsystem 3574 [ 0.277649] NET: Registered protocol family 16 3575 [ 0.278817] dump_class_init,861, success 3576 [ 0.293122] cpuidle: using governor menu 3577 [ 0.294524] sunxi iommu: irq = 8 3578 [ 0.294861] vdso: 2 pages (1 code @ ffffff8008daf000, 1 data @ ffffff800972c000) 3579 [ 0.294879] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. 3580 [ 0.296271] DMA: preallocated 256 KiB pool for atomic allocations 3581 [ 0.297666] sun50iw9p1-r-pinctrl r_pio: initialized sunXi PIO driver 3582 [ 0.312044] sun50iw9p1-pinctrl pio: initialized sunXi PIO driver 3583 [ 0.316075] iommu: Adding device 1c0e000.ve to group 0 3584 [ 0.316634] iommu: Adding device 1c00000.vp9 to group 0 3585 [ 0.328200] iommu: Adding device 1000000.disp to group 0 3586 [ 0.329618] iommu: Adding device 1480000.g2d to group 0 3587 [ 0.332832] iommu: Adding device csi0 to group 0 3588 [ 0.333308] iommu: Adding device csi1 to group 0 3589 [ 0.334535] iommu: Adding device 6600800.vind:scaler@0 to group 0 3590 [ 0.334833] iommu: Adding device 6600800.vind:scaler@1 to group 0 3591 [ 0.335141] iommu: Adding device 6600800.vind:scaler@2 to group 0 3592 [ 0.335436] iommu: Adding device 6600800.vind:scaler@3 to group 0 3593 [ 0.335725] iommu: Adding device 6600800.vind:scaler@4 to group 0 3594 [ 0.336009] iommu: Adding device 6600800.vind:scaler@5 to group 0 3595 [ 0.337039] iommu: Adding device vinc0 to group 0 3596 [ 0.337542] iommu: Adding device vinc1 to group 0 3597 [ 0.338994] iommu: Adding device 1420000.deinterlace to group 0 3598 [ 0.377854] HugeTLB registered 2 MB page size, pre-allocated 0 pages 3599 [ 0.433963] raid6: int64x1 gen() 391 MB/s 3600 [ 0.490701] raid6: int64x1 xor() 365 MB/s 3601 [ 0.547455] raid6: int64x2 gen() 591 MB/s 3602 [ 0.604205] raid6: int64x2 xor() 512 MB/s 3603 [ 0.660963] raid6: int64x4 gen() 840 MB/s 3604 [ 0.717685] raid6: int64x4 xor() 629 MB/s 3605 [ 0.774389] raid6: int64x8 gen() 964 MB/s 3606 [ 0.831166] raid6: int64x8 xor() 655 MB/s 3607 [ 0.887951] raid6: neonx1 gen() 648 MB/s 3608 [ 0.944646] raid6: neonx1 xor() 641 MB/s 3609 [ 1.001423] raid6: neonx2 gen() 976 MB/s 3610 [ 1.058128] raid6: neonx2 xor() 819 MB/s 3611 [ 1.114888] raid6: neonx4 gen() 1287 MB/s 3612 [ 1.171618] raid6: neonx4 xor() 965 MB/s 3613 [ 1.228373] raid6: neonx8 gen() 1323 MB/s 3614 [ 1.285089] raid6: neonx8 xor() 991 MB/s 3615 [ 1.285094] raid6: using algorithm neonx8 gen() 1323 MB/s 3616 [ 1.285099] raid6: .... xor() 991 MB/s, rmw enabled 3617 [ 1.285104] raid6: using intx1 recovery algorithm 3618 [ 1.285271] pwm module init! 3619 [ 1.289618] sunxi-pm debug v3.10 3620 [ 1.290703] SCSI subsystem initialized 3621 [ 1.291325] sunxi_spi_probe()2299 - [spi0] SPI MASTER MODE 3622 [ 1.291408] sunxi_spi_request_gpio()1927 - [spi0] Pinctrl init spi0 3623 [ 1.291528] sunxi_spi_clk_init()1977 - [spi0] mclk 100000000 3624 [ 1.292011] spi spi0: master is unqueued, this is deprecated 3625 [ 1.292319] sunxi_spi_probe()2379 - [spi0]: driver probe succeed, base ffffff8008066000, irq 294 3626 [ 1.292903] sunxi_spi_probe()2299 - [spi1] SPI MASTER MODE 3627 [ 1.292982] sunxi_spi_request_gpio()1927 - [spi1] Pinctrl init spi1 3628 [ 1.293098] sunxi_spi_clk_init()1977 - [spi1] mclk 100000000 3629 [ 1.293547] spi spi1: master is unqueued, this is deprecated 3630 [ 1.293854] sunxi_spi_probe()2379 - [spi1]: driver probe succeed, base ffffff8008068000, irq 295 3631 [ 1.294585] usbcore: registered new interface driver usbfs 3632 [ 1.294684] usbcore: registered new interface driver hub 3633 [ 1.294763] usbcore: registered new device driver usb 3634 [ 1.295046] sunxi_i2c_adap_init()2522 - init 3635 [ 1.295603] sunxi_i2c_probe()2208 - [i2c3] warning: failed to get regulator id 3636 [ 1.295695] sunxi_i2c_probe()2270 - [i2c3] twi_drv_used = 0 3637 [ 1.295702] sunxi_i2c_probe()2274 - [i2c3] twi_pkt_interval = 0 3638 [ 1.295717] twi3 supply twi not found, using dummy regulator 3639 [ 1.295792] twi_request_gpio()451 - [i2c3] init name: twi3 3640 [ 1.296525] sunxi_i2c_probe()2208 - [i2c5] warning: failed to get regulator id 3641 [ 1.296604] sunxi_i2c_probe()2270 - [i2c5] twi_drv_used = 0 3642 [ 1.296611] sunxi_i2c_probe()2274 - [i2c5] twi_pkt_interval = 0 3643 [ 1.296625] twi5 supply twi not found, using dummy regulator 3644 [ 1.296702] twi_request_gpio()451 - [i2c5] init name: twi5 3645 [ 1.297164] axp20x-i2c 5-0036: AXP20x variant AXP806 found 3646 [ 1.310180] axp806-aldo2: Bringing 700000uV into 3300000-3300000uV 3647 [ 1.313858] axp806-aldo3: Bringing 700000uV into 3300000-3300000uV 3648 [ 1.315058] random: fast init done 3649 [ 1.330654] axp20x-i2c 5-0036: AXP20X driver loaded 3650 [ 1.331139] media: Linux media interface: v0.10 3651 [ 1.331217] Linux video capture interface: v2.00 3652 [ 1.332015] Advanced Linux Sound Architecture Driver Initialized. 3653 [ 1.332808] Bluetooth: Core ver 2.22 3654 [ 1.332882] NET: Registered protocol family 31 3655 [ 1.332888] Bluetooth: HCI device and connection manager initialized 3656 [ 1.332906] Bluetooth: HCI socket layer initialized 3657 [ 1.332919] Bluetooth: L2CAP socket layer initialized 3658 [ 1.332958] Bluetooth: SCO socket layer initialized 3659 [ 1.333781] [DISP]disp_module_init 3660 [ 1.335074] [DISP] parser_disp_init_para,line:1403: 3661 [ 1.335083] of_property_read fb0_width fail 3662 [ 1.335094] [DISP] disp_init,line:2215: 3663 [ 1.335100] smooth display screen:0 type:4 mode:10 3664 [ 1.352552] [DISP]disp_module_init finish 3665 [ 1.353418] clocksource: Switched to clocksource arch_sys_counter 3666 [ 1.353675] VFS: Disk quotas dquot_6.6.0 3667 [ 1.353767] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 3668 [ 1.354501] Console: switching to colour frame buffer device 240x67 3669 [ 1.397742] NET: Registered protocol family 2 3670 [ 1.397862] IP idents hash table entries: 16384 (order: 5, 131072 bytes) 3671 [ 1.417007] TCP established hash table entries: 8192 (order: 4, 65536 bytes) 3672 [ 1.417080] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) 3673 [ 1.417203] TCP: Hash tables configured (established 8192 bind 8192) 3674 [ 1.417289] UDP hash table entries: 512 (order: 2, 16384 bytes) 3675 [ 1.417318] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) 3676 [ 1.417641] NET: Registered protocol family 1 3677 [ 1.418269] RPC: Registered named UNIX socket transport module. 3678 [ 1.418274] RPC: Registered udp transport module. 3679 [ 1.418277] RPC: Registered tcp transport module. 3680 [ 1.418281] RPC: Registered tcp NFSv4.1 backchannel transport module. 3681 [ 1.418556] Trying to unpack rootfs image as initramfs... 3682 [ 2.173216] Freeing initrd memory: 17256K 3683 [ 2.174337] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available 3684 [ 2.178251] audit: initializing netlink subsys (disabled) 3685 [ 2.178333] audit: type=2000 audit(2.173:1): initialized 3686 [ 2.179242] workingset: timestamp_bits=45 max_order=18 bucket_order=0 3687 [ 2.190594] DLM installed 3688 [ 2.192418] squashfs: version 4.0 (2009/01/31) Phillip Lougher 3689 [ 2.192757] Registering sdcardfs 0.1 3690 [ 2.193223] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 3691 [ 2.194880] ntfs: driver 2.1.32 [Flags: R/W]. 3692 [ 2.201328] NET: Registered protocol family 38 3693 [ 2.201686] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) 3694 [ 2.201804] io scheduler noop registered 3695 [ 2.201811] io scheduler deadline registered 3696 [ 2.201970] io scheduler cfq registered (default) 3697 [ 2.203899] failed to get easy_light_used assign 3698 [ 2.203911] failed to get normal led pin assign 3699 [ 2.203916] failed to get standby led pin assign 3700 [ 2.203921] failed to get standby led pin assign 3701 [ 2.203926] these is zero number for gpio 3702 [ 2.203930] gpio_init finish with uesd 3703 [ 2.207432] uart uart0: get regulator failed 3704 [ 2.207645] uart0: ttyS0 at MMIO 0x5000000 (irq = 280, base_baud = 1500000) is a SUNXI 3705 [ 2.207668] sw_console_setup()1706 - console setup baud 115200 parity n bits 8, flow n 3706 [ 2.207762] console [ttyS0] enabled 3707 [ 2.208572] uart uart1: get regulator failed 3708 [ 2.208760] uart1: ttyS1 at MMIO 0x5000400 (irq = 281, base_baud = 1500000) is a SUNXI 3709 [ 2.209477] uart uart5: get regulator failed 3710 [ 2.209658] uart5: ttyS5 at MMIO 0x5001400 (irq = 282, base_baud = 1500000) is a SUNXI 3711 [ 2.210972] misc dump reg init 3712 [ 2.212103] deinterlace 1420000.deinterlace: version[1.0.0], ip=0x300100 3713 [ 2.212441] Unable to detect cache hierarchy for CPU 0 3714 [ 2.226536] brd: module loaded 3715 [ 2.234698] loop: module loaded 3716 [ 2.234889] [NAND][NE] Not found valid nand node on dts 3717 [ 2.235466] Get boot type cmd line fail 3718 [ 2.236050] sunxi-bt soc@03000000:bt: Missing bt_power. 3719 [ 2.236060] sunxi-bt soc@03000000:bt: bt_power_name ((null)) 3720 [ 2.236067] sunxi-bt soc@03000000:bt: Missing bt_io_regulator. 3721 [ 2.236074] sunxi-bt soc@03000000:bt: io_regulator_name ((null)) 3722 [ 2.236132] sunxi-bt soc@03000000:bt: bt_rst gpio=211 mul-sel=1 pull=-1 drv_level=-1 data=0 3723 [ 2.236205] sunxi-bt soc@03000000:bt: devm_pinctrl_get() failed! 3724 [ 2.237089] sunxi-wlan soc@03000000:wlan: wlan_busnum (1) 3725 [ 2.237100] sunxi-wlan soc@03000000:wlan: Missing wlan_power. 3726 [ 2.237108] sunxi-wlan soc@03000000:wlan: wlan_power_name ((null)) 3727 [ 2.237116] sunxi-wlan soc@03000000:wlan: Missing wlan_io_regulator. 3728 [ 2.237123] sunxi-wlan soc@03000000:wlan: io_regulator_name ((null)) 3729 [ 2.237151] sunxi-wlan soc@03000000:wlan: wlan_regon gpio=210 mul-sel=1 pull=-1 drv_level=-1 data=0 3730 [ 2.237185] sunxi-wlan soc@03000000:wlan: get gpio chip_en failed 3731 [ 2.237194] sunxi-wlan soc@03000000:wlan: get gpio power_en failed 3732 [ 2.237211] sunxi-wlan soc@03000000:wlan: wlan_hostwake gpio=207 mul-sel=6 pull=-1 drv_level=-1 data=0 3733 [ 2.238161] [ADDR_MGT] addr_mgt_probe: success. 3734 [ 2.244758] tun: Universal TUN/TAP device driver, 1.6 3735 [ 2.244768] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 3736 [ 2.246839] gmac-power0: NULL 3737 [ 2.246850] gmac-power1: NULL 3738 [ 2.246856] gmac-power2: NULL 3739 [ 2.247778] PPP generic driver version 2.4.2 3740 [ 2.248063] PPP BSD Compression module registered 3741 [ 2.248073] PPP Deflate Compression module registered 3742 [ 2.248100] PPP MPPE Compression module registered 3743 [ 2.248109] NET: Registered protocol family 24 3744 [ 2.248143] PPTP driver version 0.8.5 3745 [ 2.248502] usbcore: registered new interface driver r8152 3746 [ 2.248585] usbcore: registered new interface driver asix 3747 [ 2.248683] usbcore: registered new interface driver ax88179_178a 3748 [ 2.248751] usbcore: registered new interface driver cdc_ether 3749 [ 2.248820] usbcore: registered new interface driver net1080 3750 [ 2.248880] usbcore: registered new interface driver cdc_subset 3751 [ 2.248942] usbcore: registered new interface driver zaurus 3752 [ 2.249035] usbcore: registered new interface driver cdc_ncm 3753 [ 2.249042] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 3754 [ 2.249397] get drv_vbus is fail, 84 3755 [ 2.249405] get ehci0-controller, regulator_io is no nocare 3756 [ 2.249677] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffff800992ac30, 0x:ffffff80081c1000, irq_no:11e 3757 [ 2.249682] [sunxi-ehci0]: Not init ehci0 3758 [ 2.249797] get ehci1-controller, regulator_io is no nocare 3759 [ 2.249973] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xffffff800992a8e8, 0x:ffffff80081c5000, irq_no:120 3760 [ 2.250030] sunxi-ehci 5200000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 3761 [ 2.250057] sunxi-ehci 5200000.ehci1-controller: new USB bus registered, assigned bus number 1 3762 [ 2.250724] sunxi-ehci 5200000.ehci1-controller: irq 288, io mem 0xffffff80081c5000 3763 [ 2.263435] sunxi-ehci 5200000.ehci1-controller: USB 0.0 started, EHCI 1.00 3764 [ 2.263740] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 3765 [ 2.263749] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 3766 [ 2.263756] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 3767 [ 2.263764] usb usb1: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 3768 [ 2.263770] usb usb1: SerialNumber: sunxi-ehci 3769 [ 2.264681] hub 1-0:1.0: USB hub found 3770 [ 2.264732] hub 1-0:1.0: 1 port detected 3771 [ 2.265411] get drv_vbus is fail, 84 3772 [ 2.265419] get ehci2-controller, regulator_io is no nocare 3773 [ 2.265664] [sunxi-ehci2]: probe, pdev->name: 5310000.ehci2-controller, sunxi_ehci: 0xffffff800992a5a0, 0x:ffffff80081cf000, irq_no:122 3774 [ 2.265715] sunxi-ehci 5310000.ehci2-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 3775 [ 2.265740] sunxi-ehci 5310000.ehci2-controller: new USB bus registered, assigned bus number 2 3776 [ 2.266053] sunxi-ehci 5310000.ehci2-controller: irq 290, io mem 0xffffff80081cf000 3777 [ 2.276778] sunxi-ehci 5310000.ehci2-controller: USB 0.0 started, EHCI 1.00 3778 [ 2.276987] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 3779 [ 2.276996] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 3780 [ 2.277004] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 3781 [ 2.277011] usb usb2: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 3782 [ 2.277018] usb usb2: SerialNumber: sunxi-ehci 3783 [ 2.277863] hub 2-0:1.0: USB hub found 3784 [ 2.277909] hub 2-0:1.0: 1 port detected 3785 [ 2.278579] get drv_vbus is fail, 84 3786 [ 2.278587] get ehci3-controller, regulator_io is no nocare 3787 [ 2.278830] [sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffff800992a258, 0x:ffffff80081d9000, irq_no:124 3788 [ 2.278881] sunxi-ehci 5311000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 3789 [ 2.278906] sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 3 3790 [ 2.279195] sunxi-ehci 5311000.ehci3-controller: irq 292, io mem 0xffffff80081d9000 3791 [ 2.290095] sunxi-ehci 5311000.ehci3-controller: USB 0.0 started, EHCI 1.00 3792 [ 2.290315] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 3793 [ 2.290324] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 3794 [ 2.290332] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 3795 [ 2.290339] usb usb3: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 3796 [ 2.290346] usb usb3: SerialNumber: sunxi-ehci 3797 [ 2.291181] hub 3-0:1.0: USB hub found 3798 [ 2.291223] hub 3-0:1.0: 1 port detected 3799 [ 2.292140] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 3800 [ 2.292518] get drv_vbus is fail, 84 3801 [ 2.292526] get ohci0-controller, regulator_io is no nocare 3802 [ 2.292859] [sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffff800992b950 3803 [ 2.292865] [sunxi-ohci0]: Not init ohci0 3804 [ 2.292978] get ohci1-controller, regulator_io is no nocare 3805 [ 2.293134] hci: request ohci1-controller gpio:80 3806 [ 2.293209] [sunxi-ohci1]: probe, pdev->name: 5200000.ohci1-controller, sunxi_ohci: 0xffffff800992b608 3807 [ 2.293258] sunxi-ohci 5200000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 3808 [ 2.293284] sunxi-ohci 5200000.ohci1-controller: new USB bus registered, assigned bus number 4 3809 [ 2.293362] sunxi-ohci 5200000.ohci1-controller: irq 289, io mem 0x00000000 3810 [ 2.354289] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 3811 [ 2.354300] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 3812 [ 2.354308] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 3813 [ 2.354315] usb usb4: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 3814 [ 2.354322] usb usb4: SerialNumber: sunxi-ohci 3815 [ 2.355199] hub 4-0:1.0: USB hub found 3816 [ 2.355247] hub 4-0:1.0: 1 port detected 3817 [ 2.355924] get drv_vbus is fail, 84 3818 [ 2.355933] get ohci2-controller, regulator_io is no nocare 3819 [ 2.356264] [sunxi-ohci2]: probe, pdev->name: 5310000.ohci2-controller, sunxi_ohci: 0xffffff800992b2c0 3820 [ 2.356314] sunxi-ohci 5310000.ohci2-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 3821 [ 2.356346] sunxi-ohci 5310000.ohci2-controller: new USB bus registered, assigned bus number 5 3822 [ 2.356424] sunxi-ohci 5310000.ohci2-controller: irq 291, io mem 0x00000000 3823 [ 2.414263] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 3824 [ 2.414273] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 3825 [ 2.414281] usb usb5: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 3826 [ 2.414288] usb usb5: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 3827 [ 2.414295] usb usb5: SerialNumber: sunxi-ohci 3828 [ 2.415160] hub 5-0:1.0: USB hub found 3829 [ 2.415205] hub 5-0:1.0: 1 port detected 3830 [ 2.415902] get drv_vbus is fail, 84 3831 [ 2.415911] get ohci3-controller, regulator_io is no nocare 3832 [ 2.416242] [sunxi-ohci3]: probe, pdev->name: 5311000.ohci3-controller, sunxi_ohci: 0xffffff800992af78 3833 [ 2.416292] sunxi-ohci 5311000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 3834 [ 2.416319] sunxi-ohci 5311000.ohci3-controller: new USB bus registered, assigned bus number 6 3835 [ 2.416395] sunxi-ohci 5311000.ohci3-controller: irq 293, io mem 0x00000000 3836 [ 2.474264] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 3837 [ 2.474275] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 3838 [ 2.474283] usb usb6: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 3839 [ 2.474290] usb usb6: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 3840 [ 2.474297] usb usb6: SerialNumber: sunxi-ohci 3841 [ 2.475152] hub 6-0:1.0: USB hub found 3842 [ 2.475202] hub 6-0:1.0: 1 port detected 3843 [ 2.476122] ohci-platform: OHCI generic platform driver 3844 [ 2.476901] usbcore: registered new interface driver uas 3845 [ 2.477073] usbcore: registered new interface driver usb-storage 3846 [ 2.477158] usbcore: registered new interface driver ums-alauda 3847 [ 2.477252] usbcore: registered new interface driver ums-cypress 3848 [ 2.477331] usbcore: registered new interface driver ums-datafab 3849 [ 2.477404] usbcore: registered new interface driver ums_eneub6250 3850 [ 2.477476] usbcore: registered new interface driver ums-freecom 3851 [ 2.477550] usbcore: registered new interface driver ums-isd200 3852 [ 2.477619] usbcore: registered new interface driver ums-jumpshot 3853 [ 2.477690] usbcore: registered new interface driver ums-karma 3854 [ 2.477764] usbcore: registered new interface driver ums-onetouch 3855 [ 2.477863] usbcore: registered new interface driver ums-realtek 3856 [ 2.477942] usbcore: registered new interface driver ums-sddr09 3857 [ 2.478011] usbcore: registered new interface driver ums-sddr55 3858 [ 2.478083] usbcore: registered new interface driver ums-usbat 3859 [ 2.478230] usb_serial_number:20080411 3860 [ 2.479464] input: sunxi-keyboard as /devices/virtual/input/input0 3861 [ 2.480122] usbcore: registered new interface driver xpad 3862 [ 2.480243] usbcore: registered new interface driver usb_acecad 3863 [ 2.480331] usbcore: registered new interface driver aiptek 3864 [ 2.480421] usbcore: registered new interface driver gtco 3865 [ 2.480501] usbcore: registered new interface driver hanwang 3866 [ 2.480579] usbcore: registered new interface driver kbtab 3867 [ 2.481065] axp2101_pek: axp2101-pek can not register without irq 3868 [ 2.481088] axp2101-pek: probe of axp2101-pek.0 failed with error -22 3869 [ 2.482496] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0 3870 [ 2.482563] sunxi-rtc rtc: RTC enabled 3871 [ 2.483043] i2c /dev entries driver 3872 [ 2.483871] lirc_dev: IR Remote Control driver registered, major 244 3873 [ 2.483882] IR NEC protocol handler initialized 3874 [ 2.483888] IR RC5(x/sz) protocol handler initialized 3875 [ 2.483894] IR RC6 protocol handler initialized 3876 [ 2.483900] IR JVC protocol handler initialized 3877 [ 2.483905] IR Sony protocol handler initialized 3878 [ 2.483911] IR SANYO protocol handler initialized 3879 [ 2.483917] IR Sharp protocol handler initialized 3880 [ 2.483923] IR MCE Keyboard/mouse protocol handler initialized 3881 [ 2.483928] IR LIRC bridge handler initialized 3882 [ 2.483934] IR XMP protocol handler initialized 3883 [ 2.484454] sunxi_ir_startup: get ir protocol failed 3884 [ 2.484497] 7040000.s_cir supply ir0 not found, using dummy regulator 3885 [ 2.484692] Registered IR keymap rc_map_sunxi 3886 [ 2.485095] input: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0/input1 3887 [ 2.485338] rc rc0: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0 3888 [ 2.486311] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input2 3889 [ 2.486942] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-rc-recv) registered at minor = 0 3890 [ 2.487670] sunxi cedar version 0.1 3891 [ 2.487858] VE: install start!!! 3892 3893 [ 2.488044] cedar_ve: cedar-ve the get irq is 278 3894 [ 2.488650] VE: get debugfs_mpp_root is NULL, please check mpp 3895 3896 [ 2.488660] VE: sunxi ve debug register driver failed! 3897 3898 [ 2.491889] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) 3899 [ 2.493179] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com 3900 [ 2.493547] Bluetooth: HCI UART driver ver 2.3 3901 [ 2.493558] Bluetooth: HCI UART protocol H4 registered 3902 [ 2.493563] Bluetooth: HCI UART protocol LL registered 3903 [ 2.493569] Bluetooth: HCI UART protocol Three-wire (H5) registered 3904 [ 2.497768] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 3905 [ 2.497783] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 3906 [ 2.497796] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 3907 [ 2.497808] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 3908 [ 2.497820] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 3909 [ 2.497832] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 3910 [ 2.498249] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 3911 [ 2.498364] sunxi-mmc sdc0: ***ctl-spec-caps*** 8 3912 [ 2.498560] sunxi-mmc sdc0: No vmmc regulator found 3913 [ 2.498567] sunxi-mmc sdc0: No vqmmc regulator found 3914 [ 2.498573] sunxi-mmc sdc0: No vdmmc regulator found 3915 [ 2.498580] sunxi-mmc sdc0: No vd33sw regulator found 3916 [ 2.498586] sunxi-mmc sdc0: No vd18sw regulator found 3917 [ 2.498592] sunxi-mmc sdc0: No vq33sw regulator found 3918 [ 2.498598] sunxi-mmc sdc0: No vq18sw regulator found 3919 [ 2.499326] sunxi-mmc sdc0: set host busy 3920 [ 2.499426] sunxi-mmc sdc0: Got CD GPIO 3921 [ 2.499813] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 3922 [ 2.499850] sunxi-mmc sdc0: no vqmmc,Check if there is regulator 3923 [ 2.516764] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3924 [ 2.533806] sunxi-mmc sdc0: detmode:gpio irq 3925 [ 2.533839] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3926 [ 2.536344] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3927 [ 2.537075] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 3928 [ 2.537176] sunxi-mmc sdc1: ***ctl-spec-caps*** 8 3929 [ 2.537314] sunxi-mmc sdc1: No vmmc regulator found 3930 [ 2.537321] sunxi-mmc sdc1: No vqmmc regulator found 3931 [ 2.537327] sunxi-mmc sdc1: No vdmmc regulator found 3932 [ 2.537334] sunxi-mmc sdc1: No vd33sw regulator found 3933 [ 2.537340] sunxi-mmc sdc1: No vd18sw regulator found 3934 [ 2.537346] sunxi-mmc sdc1: No vq33sw regulator found 3935 [ 2.537352] sunxi-mmc sdc1: No vq18sw regulator found 3936 [ 2.537991] sunxi-mmc sdc1: set host busy 3937 [ 2.538076] mmc:failed to get gpios 3938 [ 2.538370] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 3939 [ 2.538666] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3940 [ 2.541218] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3941 [ 2.553490] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3942 [ 2.558774] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3943 [ 2.558814] sunxi-mmc sdc0: no vqmmc,Check if there is regulator 3944 [ 2.570101] sunxi-mmc sdc1: detmode:manually by software 3945 [ 2.570939] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 3946 [ 2.571786] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 3947 [ 2.571829] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3948 [ 2.573470] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3949 [ 2.574340] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 3950 [ 2.575452] ledtrig-cpu: registered to indicate activity on CPUs 3951 [ 2.576225] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 3952 [ 2.577065] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 3953 [ 2.577910] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 3954 [ 2.578743] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 3955 [ 2.578780] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B 3956 [ 2.581383] mmc0: host does not support reading read-only switch, assuming write-enable 3957 [ 2.581747] sunxi_emce_hw_init()368Unable to get pclk, return fffffffe 3958 [ 2.581754] sunxi_emce_probe()590emce hw init failed! 3959 [ 2.581781] emce: probe of emce failed with error -2 3960 [ 2.582055] hidraw: raw HID events driver (C) Jiri Kosina 3961 [ 2.582071] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B 3962 [ 2.583133] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 3963 [ 2.583288] sunxi-mmc sdc0: sdc set ios:clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 3964 [ 2.583498] mmc0: new ultra high speed SDR104 SDXC card at address 0001 3965 [ 2.584650] mmcblk0: mmc0:0001 SD16G 59.5 GiB 3966 [ 2.586287] mmcblk0: p1 3967 [ 2.588546] usbcore: registered new interface driver usbhid 3968 [ 2.588555] usbhid: USB HID core driver 3969 [ 2.589976] optee: probing for conduit method from DT. 3970 [ 2.589990] optee: api uid mismatch 3971 [ 2.590582] usbcore: registered new interface driver snd-usb-audio 3972 [ 2.592188] [sunxi_hdmi_codec_init] driver and deivce register finished. 3973 [ 2.593979] [sunxi_internal_codec_probe]:get audio avcc failed 3974 [ 2.594019] [sunxi_internal_codec_probe]:get audio vcc3v3-audio failed 3975 [ 2.594256] lineout_vol:26, linein_gain:3, fmin_gain:3, digital_vol:0, adcdrc_cfg:0, adchpf_cfg:0, dacdrc_cfg:0, dachpf_cfg:0, ramp_func_used:1, pa_msleep_time:100, pa_ctl_level:1, gpio-spk:0 3976 [ 2.596798] sunxi-codec-machine sndcodec: sun50iw9-codec <-> cpudai mapping ok 3977 [ 2.598699] sndhdmi sndhdmi: ASoC: CPU DAI (null) not registered 3978 [ 2.598712] sndhdmi sndhdmi: snd_soc_register_card() failed: -517 3979 [ 2.600998] sunxi-ahub-cpudai 5097000.cpudai3-controller: ahub cpudai id invalid 3980 [ 2.601022] sunxi-ahub-cpudai: probe of 5097000.cpudai3-controller failed with error -22 3981 [ 2.605039] sndahub sndahub: sunxi-ahub-aif1 <-> 5097000.cpudai0-controller mapping ok 3982 [ 2.606425] sndahub sndahub: sunxi-ahub-aif2 <-> 5097000.cpudai1-controller mapping ok 3983 [ 2.608467] sndahub sndahub: sunxi-ahub-aif3 <-> 5097000.cpudai2-controller mapping ok 3984 [ 2.611539] pktgen: Packet Generator for packet performance testing. Version: 2.75 3985 [ 2.611969] u32 classifier 3986 [ 2.611976] Actions configured 3987 [ 2.611988] Netfilter messages via NETLINK v0.30. 3988 [ 2.612017] nfnl_acct: registering with nfnetlink. 3989 [ 2.612355] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) 3990 [ 2.612612] ctnetlink v0.93: registering with nfnetlink. 3991 [ 2.613365] xt_time: kernel timezone is -0000 3992 [ 2.613388] IPVS: Registered protocols (TCP, UDP) 3993 [ 2.613601] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) 3994 [ 2.613739] IPVS: Creating netns size=1928 id=0 3995 [ 2.613881] IPVS: ipvs loaded. 3996 [ 2.613890] IPVS: [rr] scheduler registered. 3997 [ 2.613990] ipip: IPv4 and MPLS over IPv4 tunneling driver 3998 [ 2.614729] gre: GRE over IPv4 demultiplexor driver 3999 [ 2.614738] ip_gre: GRE over IPv4 tunneling driver 4000 [ 2.616062] IPv4 over IPsec tunneling driver 4001 [ 2.616986] ip_tables: (C) 2000-2006 Netfilter Core Team 4002 [ 2.617288] arp_tables: arp_tables: (C) 2002 David S. Miller 4003 [ 2.617354] Initializing XFRM netlink socket 4004 [ 2.617387] IPsec XFRM device driver 4005 [ 2.618249] NET: Registered protocol family 10 4006 [ 2.620158] mip6: Mobile IPv6 4007 [ 2.620199] ip6_tables: (C) 2000-2006 Netfilter Core Team 4008 [ 2.621525] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver 4009 [ 2.623174] NET: Registered protocol family 17 4010 [ 2.623215] NET: Registered protocol family 15 4011 [ 2.623379] Bridge firewalling registered 4012 [ 2.623597] Bluetooth: RFCOMM TTY layer initialized 4013 [ 2.623616] Bluetooth: RFCOMM socket layer initialized 4014 [ 2.623649] Bluetooth: RFCOMM ver 1.11 4015 [ 2.623663] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 4016 [ 2.623669] Bluetooth: BNEP filters: protocol multicast 4017 [ 2.623682] Bluetooth: BNEP socket layer initialized 4018 [ 2.623688] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 4019 [ 2.623700] Bluetooth: HIDP socket layer initialized 4020 [ 2.623787] l2tp_core: L2TP core driver, V2.0 4021 [ 2.623803] l2tp_ppp: PPPoL2TP kernel driver, V2.0 4022 [ 2.623809] 8021q: 802.1Q VLAN Support v1.8 4023 [ 2.624029] sctp: Hash tables configured (bind 256/256) 4024 [ 2.624619] Key type dns_resolver registered 4025 [ 2.624759] Registered cp15_barrier emulation handler 4026 [ 2.624775] Registered setend emulation handler 4027 [ 2.625732] registered taskstats version 1 4028 [ 2.637412] zswap: default zpool zbud not available 4029 [ 2.637420] zswap: pool creation failed 4030 [ 2.640238] Btrfs loaded, crc32c=crc32c-arm64-hw 4031 [ 2.640984] HDMI 2.0 driver init start! 4032 [ 2.640999] boot_hdmi=true 4033 [ 2.641888] Can not find the node of esm 4034 [ 2.641910] ERROR: pinctrl_get for HDMI2.0 DDC fail 4035 [ 2.642000] Get hdmi_power0:vcc-hdmi 4036 [ 2.642039] 6000000.hdmi supply vcc-hdmi not found, using dummy regulator 4037 [ 2.642213] Get hdmi_power1:vdd-hdmi 4038 [ 2.642235] 6000000.hdmi supply vdd-hdmi not found, using dummy regulator 4039 [ 2.643781] hdmi_cec_init 4040 [ 2.644253] [DISP] disp_device_attached,line:146: 4041 [ 2.644263] attached ok, mgr0<-->device0, type=4 4042 [ 2.644273] [HDMI receive params]: tv mode: 0xa format:0x0 data bits:0x0 eotf:0x0 cs:0x0 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8 4043 [ 2.644286] [DISP] disp_hdmi_set_mode,line:648: 4044 [ 2.644291] hdmi_set_mode is null! 4045 [ 2.646282] HDMI2.0 module init end 4046 [ 2.657625] sunxi-thermal 5070400.thermal_sensor: avcc is not calibrated 4047 [ 2.661018] cpu cpu1: opp_list_debug_create_link: Failed to create link 4048 [ 2.661029] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12) 4049 [ 2.661062] cpu cpu2: opp_list_debug_create_link: Failed to create link 4050 [ 2.661069] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12) 4051 [ 2.661099] cpu cpu3: opp_list_debug_create_link: Failed to create link 4052 [ 2.661106] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12) 4053 [ 2.663372] sndhdmi sndhdmi: audiohdmi-dai <-> sunxi-ahub-cpu-aif1 mapping ok 4054 [ 2.664357] get det_vbus is fail, 84 4055 [ 2.664364] get id is fail, 84 4056 [ 2.664853] sunxi-rtc rtc: setting system clock to 1970-01-01 00:00:08 UTC (8) 4057 [ 2.666258] axp806-dcdcb: disabling 4058 [ 2.668244] axp806-cldo1: disabling 4059 [ 2.669878] ALSA device list: 4060 [ 2.669883] #0: audiocodec 4061 [ 2.669887] #1: sndahub 4062 [ 2.669890] #2: sndhdmi 4063 [ 2.671549] Freeing unused kernel memory: 3008K 4064 [ 2.716878] random: systemd-udevd: uninitialized urandom read (16 bytes read) 4065 [ 2.718849] random: systemd-udevd: uninitialized urandom read (16 bytes read) 4066 [ 2.721751] random: systemd-udevd: uninitialized urandom read (16 bytes read) 4067 [ 2.787155] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device connect 4068 [ 2.950231] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device disconnect 4069 [ 3.050169] HDMI cable is connected 4070 [ 3.300112] usb 4-1: new full-speed USB device number 2 using sunxi-ohci 4071 [ 3.520629] usb 4-1: New USB device found, idVendor=24ae, idProduct=2013 4072 [ 3.520637] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 4073 [ 3.520642] usb 4-1: Product: Rapoo 2.4G Wireless Device 4074 [ 3.520647] usb 4-1: Manufacturer: RAPOO 4075 [ 3.528552] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.0/0003:24AE:2013.0001/input/input3 4076 [ 3.529137] hid-generic 0003:24AE:2013.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input0 4077 [ 3.535296] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.1/0003:24AE:2013.0002/input/input4 4078 [ 3.590987] hid-generic 0003:24AE:2013.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input1 4079 [ 3.594916] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.2/0003:24AE:2013.0003/input/input5 4080 [ 3.652089] hid-generic 0003:24AE:2013.0003: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input2 4081 [ 4.648774] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) 4082 [ 5.149026] systemd[1]: System time before build time, advancing clock. 4083 [ 5.153888] cgroup: cgroup2: unknown option "nsdelegate,memory_recursiveprot" 4084 [ 5.154532] cgroup: cgroup2: unknown option "nsdelegate" 4085 [ 5.167122] systemd[1]: systemd 252.12-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) 4086 [ 5.167146] systemd[1]: Detected architecture arm64. 4087 [ 5.168243] systemd[1]: Warning! Reported kernel version 4.9.318-legacy-sun50iw9 is older than systemd's required baseline kernel version 4.15. Your mileage may vary. 4088 [ 5.174347] systemd[1]: Hostname set to <opi>. 4089 [ 5.189012] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation 4090 [ 6.048114] (sd-execut[1463]: /usr/lib/systemd/system-generators/netplan failed with exit status 1. 4091 [ 6.404139] systemd[1]: /lib/systemd/system/hdmi-audio.service:10: Support for option SysVStartPriority= has been removed and it is ignored 4092 [ 6.630871] systemd[1]: Queued start job for default target graphical.target. 4093 [ 6.638188] systemd[1]: Created slice system-getty.slice - Slice /system/getty. 4094 [ 6.640492] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. 4095 [ 6.642717] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. 4096 [ 6.644107] systemd[1]: Created slice user.slice - User and Session Slice. 4097 [ 6.644745] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. 4098 [ 6.645300] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 4099 [ 6.645621] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. 4100 [ 6.646126] systemd[1]: Reached target slices.target - Slice Units. 4101 [ 6.646424] systemd[1]: Reached target swap.target - Swaps. 4102 [ 6.646693] systemd[1]: Reached target time-set.target - System Time Set. 4103 [ 6.647210] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. 4104 [ 6.664481] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket. 4105 [ 6.665565] systemd[1]: Listening on syslog.socket - Syslog Socket. 4106 [ 6.666493] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. 4107 [ 6.667249] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. 4108 [ 6.668873] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. 4109 [ 6.669806] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). 4110 [ 6.670921] systemd[1]: Listening on systemd-journald.socket - Journal Socket. 4111 [ 6.672981] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. 4112 [ 6.673962] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. 4113 [ 6.677940] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... 4114 [ 6.682530] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... 4115 [ 6.687914] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... 4116 [ 6.689005] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 4117 [ 6.690001] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). 4118 [ 6.697394] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... 4119 [ 6.702802] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... 4120 [ 6.708936] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... 4121 [ 6.717640] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... 4122 [ 6.727773] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 4123 [ 6.734831] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... 4124 [ 6.742802] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 4125 [ 6.750866] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... 4126 [ 6.758016] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 4127 [ 6.760255] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). 4128 [ 6.770670] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... 4129 [ 6.777606] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... 4130 [ 6.784370] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... 4131 [ 6.793365] fuse init (API version 7.26) 4132 [ 6.800338] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. 4133 [ 6.804451] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. 4134 [ 6.807719] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. 4135 [ 6.811750] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. 4136 [ 6.815623] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. 4137 [ 6.819314] systemd[1]: modprobe@configfs.service: Deactivated successfully. 4138 [ 6.821122] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. 4139 [ 6.825927] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 4140 [ 6.826881] 4141 insmod_device_driver 4142 4143 [ 6.827201] device_chose finished 124! 4144 [ 6.827936] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 4145 [ 6.834941] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro 4146 [ 6.844869] fbtft: module is from the staging directory, the quality is unknown, you have been warned. 4147 [ 6.852000] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned. 4148 [ 6.852967] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 4149 [ 6.852977] spidev spi1.1: dh2228fv spi1.1 16777kHz 8 bits mode=0x00 4150 [ 6.853169] spidev spi1.1: Deleting spi1.1 4151 [ 6.854092] fbtft_device: GPIOS used by 'fb_st7735r': 4152 [ 6.854099] fbtft_device: 'reset' = GPIO73 4153 [ 6.854103] fbtft_device: 'dc' = GPIO70 4154 [ 6.854114] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 4155 [ 6.854120] spi spi1.1: fb_st7735r spi1.1 16000kHz 8 bits mode=0x00 4156 [ 6.879009] WCN: marlin_init entry! 4157 [ 6.880228] WCN: marlin_parse_dt reset gpio=211 4158 [ 6.880239] WCN_ERR: gpio reset request err: 211 4159 [ 6.880245] WCN: wcn config bt wake host 4160 [ 6.880795] WCN: marlin_registsr_bt_wake bt_hostwake gpio=208 mul-sel=6 pull=-1 drv_level=-1 data=0 intnum=193 4161 [ 6.881011] WCN: wcn config wifi wake host 4162 [ 6.881033] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 4163 [ 6.884501] sdiohal:sdiohal_init ok 4164 [ 6.885358] WCN: marlin_probe ok! 4165 [ 6.892654] mtty_probe init device addr: 0xffffffc0097acc00 4166 [ 6.892873] -->rfkill_bluetooth_init 4167 [ 6.893072] <--rfkill_bluetooth_init 4168 [ 6.901683] systemd[1]: modprobe@drm.service: Deactivated successfully. 4169 [ 6.902493] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. 4170 [ 6.909481] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 4171 [ 6.910525] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 4172 [ 6.913492] systemd[1]: modprobe@fuse.service: Deactivated successfully. 4173 [ 6.914447] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. 4174 [ 6.918362] systemd[1]: modprobe@loop.service: Deactivated successfully. 4175 [ 6.921887] WCN: start_marlin [MARLIN_WIFI] 4176 [ 6.921901] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 4177 [ 6.921904] WCN: the first power on start 4178 [ 6.964092] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 4179 [ 6.990704] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. 4180 [ 6.998780] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... 4181 [ 7.004536] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... 4182 [ 7.005551] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 4183 [ 7.036842] WCN: marlin chip en pull up 4184 [ 7.041179] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... 4185 [ 7.042418] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 4186 [ 7.049265] systemd[1]: Starting systemd-sysusers.service - Create System Users... 4187 [ 7.063498] sdiohal:sdiohal_scan_card 4188 [ 7.063518] sunxi-wlan soc@03000000:wlan: bus_index: 1 4189 [ 7.063715] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 4190 [ 7.065203] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. 4191 [ 7.067908] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. 4192 [ 7.070056] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. 4193 [ 7.080184] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 4194 [ 7.097638] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 4195 [ 7.098517] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 4196 [ 7.098557] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 4197 [ 7.101071] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 4198 [ 7.104191] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 4199 [ 7.111988] systemd[1]: Finished systemd-sysusers.service - Create System Users. 4200 [ 7.118800] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... 4201 [ 7.120218] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 4202 [ 7.131520] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B 4203 [ 7.132273] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 4204 [ 7.132328] sunxi-mmc sdc1: sdc set ios:clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 4205 [ 7.132926] mmc1: new ultra high speed SDR104 SDIO card at address 8800 4206 [ 7.133371] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=150000000 4207 [ 7.133770] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 4208 [ 7.133804] sdiohal:scan end! 4209 [ 7.133815] WCN: marlin_scan_finish! 4210 [ 7.133827] WCN: then marlin start to download 4211 [ 7.133837] sdiohal:probe ok 4212 [ 7.133871] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! 4213 [ 7.201228] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. 4214 [ 7.203486] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. 4215 [ 7.209184] systemd[1]: Mounting tmp.mount - /tmp... 4216 [ 7.214720] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... 4217 [ 7.217170] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices. 4218 [ 7.222287] systemd[1]: Mounted tmp.mount - /tmp. 4219 [ 7.224625] systemd[1]: Reached target local-fs.target - Local File Systems. 4220 [ 7.253090] systemd[1]: Starting armbian-led-state.service - Armbian leds state... 4221 [ 7.258291] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config... 4222 [ 7.263770] systemd[1]: Starting console-setup.service - Set console font and keymap... 4223 [ 7.273395] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown... 4224 [ 7.280051] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data... 4225 [ 7.297697] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 4226 [ 7.305671] systemd[1]: Starting systemd-udev-settle.service - Wait for udev To Complete Device Initialization... 4227 [ 7.312960] systemd[1]: Starting ufw.service - Uncomplicated firewall... 4228 [ 7.316886] systemd[1]: Finished console-setup.service - Set console font and keymap. 4229 [ 7.321392] systemd[1]: Finished ifupdown-pre.service - Helper to synchronize boot up for ifupdown. 4230 [ 7.324235] systemd[1]: Received SIGRTMIN+20 from PID 1421 (plymouthd). 4231 [ 7.364894] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data. 4232 [ 7.367838] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 4233 [ 7.368732] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 4234 [ 7.369688] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 4235 [ 7.372600] systemd[1]: Finished ufw.service - Uncomplicated firewall. 4236 [ 7.385284] systemd[1]: Finished armbian-led-state.service - Armbian leds state. 4237 [ 7.388680] systemd[1]: Reached target network-pre.target - Preparation for Network. 4238 [ 7.563709] zram: Added device: zram0 4239 [ 7.564594] zram: Added device: zram1 4240 [ 7.565372] zram: Added device: zram2 4241 [ 7.596641] zswap: can't enable, initialization failed 4242 [ 7.631630] zram0: detected capacity change from 0 to 506396672 4243 [ 7.717088] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files. 4244 [ 7.730819] systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen... 4245 [ 7.788683] systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen. 4246 [ 7.791220] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 4247 [ 7.792262] systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch. 4248 [ 7.792933] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. 4249 [ 7.808929] fb_st7735r: module is from the staging directory, the quality is unknown, you have been warned. 4250 [ 8.160208] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! 4251 [ 9.153318] graphics fb1: fb_st7735r frame buffer, 160x128, 40 KiB video memory, 4 KiB buffer memory, fps=20, spi1.1 at 16 MHz 4252 [ 9.173543] WCN: marlin_request_firmware from (null)wcnmodem.bin start! 4253 [ 9.242911] systemd[1]: Found device dev-ttyS0.device - /dev/ttyS0. 4254 [ 9.380524] systemd[1]: Reached target usb-gadget.target - Hardware activated USB gadget. 4255 [ 9.671062] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch. 4256 [ 9.686402] systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status... 4257 [ 9.729479] sunxi-bt soc@03000000:bt: set block: 0 4258 [ 9.749704] bluetooth_set_power: start_block=0 4259 [ 9.749717] WCN: start_marlin [MARLIN_BLUETOOTH] 4260 [ 9.873282] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 4261 [ 9.873595] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 4262 [ 9.874250] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 4263 [ 9.880617] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 4264 [ 9.891122] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 4265 [ 9.902156] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 4266 [ 9.910280] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 4267 [ 9.914021] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 4268 [ 9.914867] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 4269 [ 9.917807] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 4270 [ 9.921733] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 4271 [ 9.926699] systemd[1]: modprobe@loop.service: Deactivated successfully. 4272 [ 9.970866] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 4273 [ 9.973118] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 4274 [ 9.974600] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 4275 [ 9.975497] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 4276 [ 9.977899] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 4277 [ 9.978199] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 4278 [ 10.041010] systemd[1]: Finished systemd-udev-settle.service - Wait for udev To Complete Device Initialization. 4279 [ 10.046987] systemd[1]: Starting brltty.service - Braille Device Support... 4280 [ 10.186775] WCN: marlin_request_firmware from (null)wcnmodem.bin start! 4281 [ 10.660377] Adding 494524k swap on /dev/zram0. Priority:5 extents:1 across:494524k SSFS 4282 [ 10.715393] systemd[1]: Started brltty.service - Braille Device Support. 4283 [ 10.724860] input: BRLTTY 6.5 Linux Screen Driver Keyboard as /devices/virtual/input/input6 4284 [ 10.825855] zram1: detected capacity change from 0 to 52428800 4285 [ 11.200171] WCN_ERR: btwifi_download_firmware request firmware error 4286 [ 14.879269] systemd[1]: Finished armbian-zram-config.service - Armbian ZRAM config. 4287 [ 14.885303] systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging... 4288 [ 14.941500] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard 4289 [ 18.419212] systemd[1]: Finished armbian-ramlog.service - Armbian memory supported logging. 4290 [ 18.425601] systemd[1]: Starting systemd-journald.service - Journal Service... 4291 [ 18.697120] systemd-journald[1844]: Data hash table of /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal has a fill level at 75.1 (1655 of 2204 items, 1269760 file size, 767 bytes per hash table item), suggesting rotation. 4292 [ 18.697143] systemd-journald[1844]: /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal: Journal header limits reached or header out-of-date, rotating. 4293 [ 18.701111] systemd[1]: Started systemd-journald.service - Journal Service. 4294 [ 18.742686] systemd-journald[1844]: Received client request to flush runtime journal. 4295 [ 19.006495] IPVS: Creating netns size=1928 id=1 4296 [ 19.976211] random: crng init done 4297 [ 19.976222] random: 7 urandom warning(s) missed due to ratelimiting 4298 [ 37.173491] WCN_ERR: marlin download timeout 4299 [ 37.173503] sdiohal:sdiohal_runtime_put entry 4300 [ 37.173609] sdiohal:sdiohal_runtime_put wait xmit_cnt end 4301 [ 37.173653] WCN: marlin power state:0, subsys: [MARLIN_BLUETOOTH] power 1 4302 [ 37.173658] WCN: no module to power on, start to power on 4303 [ 37.184625] sdiohal err:sdiohal_adma_pt_write xmit_cnt:0 xmit_start:0,not have card 4304 [ 37.184647] sdiohal err:sdiohal_aon_writeb xmit_cnt:0 xmit_start:0,not have card 4305 [ 37.184652] sdiohal err:sdiohal_aon_writeb xmit_cnt:0 xmit_start:0,not have card 4306 [ 37.200146] sdiohal:sdiohal_scan_card 4307 [ 37.200158] sdiohal:Already exist card!, xmit_cnt=0x0 4308 [ 37.200172] sunxi-wlan soc@03000000:wlan: bus_index: 1 4309 [ 37.200294] sdiohal:[sdiohal_remove]enter 4310 [ 37.200310] sdiohal:remove card end 4311 [ 37.200462] mmc1: card 8800 removed 4312 [ 37.200559] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B 4313 [ 37.201660] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 4314 [ 37.216764] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 4315 [ 37.234165] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 4316 [ 37.236691] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 4317 [ 37.239806] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 4318 [ 37.253438] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 4319 [ 37.264006] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B 4320 [ 37.264734] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 4321 [ 37.264783] sunxi-mmc sdc1: sdc set ios:clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 4322 [ 37.265328] mmc1: new ultra high speed SDR104 SDIO card at address 8800 4323 [ 37.306765] sunxi-wlan soc@03000000:wlan: bus_index: 1 4324 [ 37.307017] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=150000000 4325 [ 37.307095] WCN: marlin_scan_finish! 4326 [ 37.307100] sdiohal:probe ok 4327 [ 37.307190] sdiohal:scan end! 4328 [ 37.307197] WCN: only marlin start to download 4329 [ 37.307218] WCN: marlin_request_firmware from (null)wcnmodem.bin start! 4330 [ 38.320161] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! 4331 [ 39.333502] WCN: marlin_request_firmware from (null)wcnmodem.bin start! 4332 [ 40.346784] WCN: marlin_request_firmware from (null)wcnmodem.bin start! 4333 [ 40.379920] unisoc_wifi: probe of unisoc_wifi failed with error -1 4334 4335 ### armbian-release: 4336 4337 # PLEASE DO NOT EDIT THIS FILE 4338 BOARD=orangepizero2 4339 BOARD_NAME="Orange Pi Zero2" 4340 BOARDFAMILY=sun50iw9 4341 BUILD_REPOSITORY_URL=https://github.com/armbian/build 4342 BUILD_REPOSITORY_COMMIT=ac829eb6 4343 LINUXFAMILY=sun50iw9 4344 ARCH=arm64 4345 IMAGE_TYPE=stable 4346 BOARD_TYPE=conf 4347 INITRD_ARCH=arm 4348 KERNEL_IMAGE_TYPE=Image 4349 FORCE_BOOTSCRIPT_UPDATE=yes 4350 VENDOR=Armbian 4351 BOOTSCRIPT_FORCE_UPDATE="yes" 4352 BOOTSCRIPT_DST="boot.cmd" 4353 VERSION=23.8.1 4354 REVISION=23.8.1 4355 BRANCH=legacy 4356 4357 ### boot environment: 4358 4359 verbosity=1 4360 console=serial 4361 #disp_mode=1080p60 4362 #fb0_width=1280 4363 #fb0_height=720 4364 rootdev=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e 4365 rootfstype=ext4 4366 overlays=spi-spidev 4367 param_spidev_spi_bus=1 4368 param_spidev_spi_cs=1 4369 extraargs=fbcon=map:1 4370 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u 4371 4372 ### lsusb: 4373 4374 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 4375 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 4376 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 4377 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 4378 Bus 004 Device 002: ID 24ae:2013 Shenzhen Rapoo Technology Co., Ltd. Rapoo 2.4G Wireless Device 4379 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 4380 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 4381 4382 ### lscpu: 4383 4384 Architecture: aarch64 4385 CPU op-mode(s): 32-bit, 64-bit 4386 Byte Order: Little Endian 4387 CPU(s): 4 4388 On-line CPU(s) list: 0-3 4389 Vendor ID: ARM 4390 Model name: Cortex-A53 4391 Model: 4 4392 Thread(s) per core: 1 4393 Core(s) per cluster: 4 4394 Socket(s): - 4395 Cluster(s): 1 4396 Stepping: r0p4 4397 CPU(s) scaling MHz: 100% 4398 CPU max MHz: 1512.0000 4399 CPU min MHz: 480.0000 4400 BogoMIPS: 48.00 4401 Flags: fp asimd aes pmull sha1 sha2 crc32 4402 4403 ### cpuinfo: 4404 4405 processor : 0 4406 BogoMIPS : 48.00 4407 Features : fp asimd aes pmull sha1 sha2 crc32 4408 CPU implementer : 0x41 4409 CPU architecture: 8 4410 CPU variant : 0x0 4411 CPU part : 0xd03 4412 CPU revision : 4 4413 4414 processor : 1 4415 BogoMIPS : 48.00 4416 Features : fp asimd aes pmull sha1 sha2 crc32 4417 CPU implementer : 0x41 4418 CPU architecture: 8 4419 CPU variant : 0x0 4420 CPU part : 0xd03 4421 CPU revision : 4 4422 4423 processor : 2 4424 BogoMIPS : 48.00 4425 Features : fp asimd aes pmull sha1 sha2 crc32 4426 CPU implementer : 0x41 4427 CPU architecture: 8 4428 CPU variant : 0x0 4429 CPU part : 0xd03 4430 CPU revision : 4 4431 4432 processor : 3 4433 BogoMIPS : 48.00 4434 Features : fp asimd aes pmull sha1 sha2 crc32 4435 CPU implementer : 0x41 4436 CPU architecture: 8 4437 CPU variant : 0x0 4438 CPU part : 0xd03 4439 CPU revision : 4 4440 4441 4442 ### meminfo: 4443 4444 MemTotal: 989056 kB 4445 MemFree: 798200 kB 4446 MemAvailable: 886428 kB 4447 Buffers: 15720 kB 4448 Cached: 79444 kB 4449 SwapCached: 0 kB 4450 Active: 68448 kB 4451 Inactive: 50800 kB 4452 Active(anon): 24192 kB 4453 Inactive(anon): 644 kB 4454 Active(file): 44256 kB 4455 Inactive(file): 50156 kB 4456 Unevictable: 0 kB 4457 Mlocked: 0 kB 4458 SwapTotal: 494524 kB 4459 SwapFree: 494524 kB 4460 Dirty: 712 kB 4461 Writeback: 0 kB 4462 AnonPages: 23968 kB 4463 Mapped: 24876 kB 4464 Shmem: 812 kB 4465 Slab: 28268 kB 4466 SReclaimable: 9280 kB 4467 SUnreclaim: 18988 kB 4468 KernelStack: 2560 kB 4469 PageTables: 1036 kB 4470 NFS_Unstable: 0 kB 4471 Bounce: 0 kB 4472 WritebackTmp: 0 kB 4473 CommitLimit: 989052 kB 4474 Committed_AS: 83364 kB 4475 VmallocTotal: 263061440 kB 4476 VmallocUsed: 0 kB 4477 VmallocChunk: 0 kB 4478 CmaTotal: 16384 kB 4479 CmaFree: 7468 kB 4480 HugePages_Total: 0 4481 HugePages_Free: 0 4482 HugePages_Rsvd: 0 4483 HugePages_Surp: 0 4484 Hugepagesize: 2048 kB 4485 4486 ### virtual memory: 4487 4488 vm.admin_reserve_kbytes = 8192 4489 vm.block_dump = 0 4490 vm.compact_unevictable_allowed = 1 4491 vm.dirty_background_bytes = 0 4492 vm.dirty_background_ratio = 10 4493 vm.dirty_bytes = 0 4494 vm.dirty_expire_centisecs = 3000 4495 vm.dirty_ratio = 20 4496 vm.dirtytime_expire_seconds = 43200 4497 vm.dirty_writeback_centisecs = 500 4498 vm.extfrag_threshold = 500 4499 vm.extra_free_kbytes = 0 4500 vm.hugepages_treat_as_movable = 0 4501 vm.hugetlb_shm_group = 0 4502 vm.laptop_mode = 0 4503 vm.legacy_va_layout = 0 4504 vm.lowmem_reserve_ratio = 256 32 4505 vm.max_map_count = 65530 4506 vm.min_free_kbytes = 3937 4507 vm.mmap_min_addr = 4096 4508 vm.mmap_rnd_bits = 18 4509 vm.mmap_rnd_compat_bits = 11 4510 vm.nr_hugepages = 0 4511 vm.nr_overcommit_hugepages = 0 4512 vm.nr_pdflush_threads = 0 4513 vm.oom_dump_tasks = 1 4514 vm.oom_kill_allocating_task = 0 4515 vm.overcommit_kbytes = 0 4516 vm.overcommit_memory = 0 4517 vm.overcommit_ratio = 50 4518 vm.page-cluster = 0 4519 vm.panic_on_oom = 0 4520 vm.percpu_pagelist_fraction = 0 4521 vm.stat_interval = 1 4522 vm.swappiness = 100 4523 vm.user_reserve_kbytes = 30007 4524 vm.vfs_cache_pressure = 100 4525 vm.watermark_scale_factor = 10 4526 4527 ### ip addr: 4528 4529 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 4530 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 4531 inet XXX.XXX.0.1/8 scope host lo 4532 valid_lft forever preferred_lft forever 4533 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 4534 link/ether a2:f9:75:52:ad:58 brd ff:ff:ff:ff:ff:ff 4535 3: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 4536 link/ether fa:6e:f4:da:68:8c brd ff:ff:ff:ff:ff:ff 4537 4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 4538 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 4539 5: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN group default qlen 1 4540 link/gre XXX.XXX.0.0 brd XXX.XXX.0.0 4541 6: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN group default qlen 1000 4542 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 4543 7: ip_vti0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 4544 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 4545 8: ip6_vti0@NONE: <NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1 4546 link/tunnel6 :: brd :: 4547 9: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 4548 link/sit XXX.XXX.0.0 brd XXX.XXX.0.0 4549 10: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN group default qlen 1 4550 link/tunnel6 :: brd :: 4551 4552 ### partitions: 4553 4554 major minor #blocks name 4555 4556 179 0 62410752 mmcblk0 4557 179 1 61763584 mmcblk0p1 4558 253 0 494528 zram0 4559 253 1 51200 zram1 4560 4561 ### df: 4562 4563 udev 466M 0 466M 0% /dev 4564 tmpfs 97M 2.1M 95M 3% /run 4565 /dev/mmcblk0p1 58G 6.3G 52G 11% / 4566 tmpfs 483M 0 483M 0% /dev/shm 4567 tmpfs 5.0M 0 5.0M 0% /run/lock 4568 tmpfs 483M 4.0K 483M 1% /tmp 4569 /dev/zram1 47M 6.9M 37M 16% /var/log 4570 4571 ### lsblk: 4572 4573 NAME FSTYPE SIZE MOUNTPOINT UUID 4574 mmcblk0 59.5G 4575 └─mmcblk0p1 ext4 58.9G / 0c85f38a-a16e-49a0-a53c-99d9856e983e 4576 zram1 50M /var/log 4577 zram2 0B 4578 4579 ### zramctl: 4580 4581 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT 4582 /dev/zram1 lz4 50M 7M 2M 2.4M 4 /var/log 4583 /dev/zram0 lzo 482.9M 4K 76B 12K 4 [SWAP] 4584 4585 ### mtab: 4586 4587 /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 4588 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 4589 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 4590 4591 ### mmc0:0001 info: 4592 4593 manfid: 0x0000fe 4594 cid: fe3432534431364720000000690091f5 4595 fwrev: 0x0 4596 csd: 400e00325b590001dc277f800a40008b 4597 ocr: 0x00200000 4598 type: SD 4599 date: 01/2009 4600 hwrev: 0x2 4601 dsr: 0x404 4602 serial: 0x00000069 4603 erase_size: 512 4604 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SD16G MODALIAS=mmc:block 4605 ssr: 000000000800000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 4606 scr: 0285808300000000 4607 oemid: 0x3432 4608 preferred_erase_size: 4194304 4609 name: SD16G 4610 4611 ### Boot system health: 4612 4613 Time CPU load %cpu %sys %usr %nice %io %irq Tcpu C.St. 4614 14:17:38 1512 MHz 1.54 23% 11% 10% 0% 1% 0% 51.3 °C 0/5 4615 14:17:39 1512 MHz 1.54 96% 11% 59% 0% 24% 0% 51.3 °C 0/5 4616 14:17:39 1512 MHz 2.29 93% 13% 54% 1% 24% 0% 51.3 °C 0/5 4617 14:17:40 1512 MHz 2.29 86% 10% 54% 2% 19% 0% 49.6 °C 0/5 4618 14:17:40 1512 MHz 2.29 58% 6% 29% 2% 19% 0% 49.6 °C 0/5 4619 4620 ### Activated 1 lzo zram swap devices with 482MB each. 4621 ### Activated Armbian ramlog partition with lz4 compression 4622 4623 Mon Sep 25 02:27:47 PM -03 2023 | Orange Pi Zero2 | 23.8.1 | arm64 | aarch64 | 4.9.318-legacy-sun50iw9 4624 4625 ### dmesg: 4626 4627 [ 0.000000] Booting Linux on physical CPU 0x0 4628 [ 0.000000] Linux version 4.9.318-legacy-sun50iw9 (armbian@next) (gcc version 11.4.0 (Ubuntu 11.4.0-1ubuntu1~22.04) ) #1 SMP PREEMPT Tue May 17 02:06:13 UTC 2022 4629 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] 4630 [ 0.000000] disp reserve base 0x7bf4fcc0 ,size 0x384000 4631 [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 4632 [ 0.000000] On node 0 totalpages: 262144 4633 [ 0.000000] DMA zone: 4096 pages used for memmap 4634 [ 0.000000] DMA zone: 0 pages reserved 4635 [ 0.000000] DMA zone: 262144 pages, LIFO batch:31 4636 [ 0.000000] psci: probing for conduit method from DT. 4637 [ 0.000000] psci: PSCIv1.0 detected in firmware. 4638 [ 0.000000] psci: Using standard PSCI v0.2 function IDs 4639 [ 0.000000] psci: Trusted OS migration not required 4640 [ 0.000000] psci: SMC Calling Convention v1.0 4641 [ 0.000000] percpu: Embedded 21 pages/cpu s45592 r8192 d32232 u86016 4642 [ 0.000000] pcpu-alloc: s45592 r8192 d32232 u86016 alloc=21*4096 4643 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 4644 [ 0.000000] Detected VIPT I-cache on CPU0 4645 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 4646 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258048 4647 [ 0.000000] Kernel command line: root=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e rootwait rootfstype=ext4 splash=verbose console=ttyS0,115200 consoleblank=0 loglevel=1 ubootpart=68ea14b7-01 disp_reserve=3686400,0x7bf4fcc0 fbcon=map:1 4648 [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes 4649 [ 0.000000] log_buf_len total cpu_extra contributions: 393216 bytes 4650 [ 0.000000] log_buf_len min size: 131072 bytes 4651 [ 0.000000] log_buf_len: 524288 bytes 4652 [ 0.000000] early log buf free: 129352(98%) 4653 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) 4654 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) 4655 [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) 4656 [ 0.000000] Memory: 952408K/1048576K available (11902K kernel code, 1476K rwdata, 6668K rodata, 3008K init, 674K bss, 79784K reserved, 16384K cma-reserved) 4657 [ 0.000000] Virtual kernel memory layout: 4658 [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) 4659 [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) 4660 [ 0.000000] .text : 0xffffff8008208000 - 0xffffff8008da8000 ( 11904 KB) 4661 [ 0.000000] .rodata : 0xffffff8008da8000 - 0xffffff8009438000 ( 6720 KB) 4662 [ 0.000000] .init : 0xffffff8009438000 - 0xffffff8009728000 ( 3008 KB) 4663 [ 0.000000] .data : 0xffffff8009728000 - 0xffffff8009899008 ( 1477 KB) 4664 [ 0.000000] .bss : 0xffffff8009899008 - 0xffffff8009941b94 ( 675 KB) 4665 [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) 4666 [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) 4667 [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) 4668 [ 0.000000] 0xffffffbf00000000 - 0xffffffbf01000000 ( 16 MB actual) 4669 [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB) 4670 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 4671 [ 0.000000] Preemptible hierarchical RCU implementation. 4672 [ 0.000000] Build-time adjustment of leaf fanout to 64. 4673 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 4674 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns 4675 [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt). 4676 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 4677 [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 4678 [ 0.000232] Console: colour dummy device 80x25 4679 [ 0.000248] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) 4680 [ 0.000256] pid_max: default: 32768 minimum: 301 4681 [ 0.000453] Security Framework initialized 4682 [ 0.000463] AppArmor: AppArmor disabled by boot time parameter 4683 [ 0.000575] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) 4684 [ 0.000581] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) 4685 [ 0.001858] sched-energy: CPU device node has no sched-energy-costs 4686 [ 0.001872] Invalid sched_group_energy for CPU0 4687 [ 0.001880] CPU0: update cpu_capacity 1024 4688 [ 0.008940] ASID allocator initialised with 32768 entries 4689 [ 0.027902] BOOTEVENT: 27.887873: ON 4690 [ 0.055885] Detected VIPT I-cache on CPU1 4691 [ 0.055939] Invalid sched_group_energy for CPU1 4692 [ 0.055943] CPU1: update cpu_capacity 1024 4693 [ 0.055946] CPU1: Booted secondary processor [410fd034] 4694 [ 0.079271] Detected VIPT I-cache on CPU2 4695 [ 0.079310] Invalid sched_group_energy for CPU2 4696 [ 0.079313] CPU2: update cpu_capacity 1024 4697 [ 0.079316] CPU2: Booted secondary processor [410fd034] 4698 [ 0.102675] Detected VIPT I-cache on CPU3 4699 [ 0.102709] Invalid sched_group_energy for CPU3 4700 [ 0.102712] CPU3: update cpu_capacity 1024 4701 [ 0.102715] CPU3: Booted secondary processor [410fd034] 4702 [ 0.102795] Brought up 4 CPUs 4703 [ 0.102802] SMP: Total of 4 processors activated. 4704 [ 0.102810] CPU features: detected feature: 32-bit EL0 Support 4705 [ 0.102816] CPU features: detected feature: Kernel page table isolation (KPTI) 4706 [ 0.106582] CPU: All CPU(s) started at EL1 4707 [ 0.106603] alternatives: patching kernel code 4708 [ 0.106779] Invalid sched_group_energy for CPU3 4709 [ 0.106788] CPU3: update max cpu_capacity 1024 4710 [ 0.106794] Invalid sched_group_energy for Cluster3 4711 [ 0.106799] Invalid sched_group_energy for CPU2 4712 [ 0.106805] Invalid sched_group_energy for Cluster2 4713 [ 0.106810] Invalid sched_group_energy for CPU1 4714 [ 0.106816] Invalid sched_group_energy for Cluster1 4715 [ 0.106820] Invalid sched_group_energy for CPU0 4716 [ 0.106826] Invalid sched_group_energy for Cluster0 4717 [ 0.108252] devtmpfs: initialized 4718 [ 0.112691] CPU1: update max cpu_capacity 1024 4719 [ 0.143391] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns 4720 [ 0.143418] futex hash table entries: 1024 (order: 5, 131072 bytes) 4721 [ 0.144081] xor: measuring software checksum speed 4722 [ 0.176232] 8regs : 1933.200 MB/sec 4723 [ 0.209611] 8regs_prefetch: 1720.800 MB/sec 4724 [ 0.242998] 32regs : 2287.200 MB/sec 4725 [ 0.276385] 32regs_prefetch: 1935.600 MB/sec 4726 [ 0.276391] xor: using function: 32regs (2287.200 MB/sec) 4727 [ 0.276450] atomic64_test: passed 4728 [ 0.276456] pinctrl core: initialized pinctrl subsystem 4729 [ 0.277619] NET: Registered protocol family 16 4730 [ 0.278704] dump_class_init,861, success 4731 [ 0.293114] cpuidle: using governor menu 4732 [ 0.294550] sunxi iommu: irq = 8 4733 [ 0.294876] vdso: 2 pages (1 code @ ffffff8008daf000, 1 data @ ffffff800972c000) 4734 [ 0.294894] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. 4735 [ 0.296301] DMA: preallocated 256 KiB pool for atomic allocations 4736 [ 0.297673] sun50iw9p1-r-pinctrl r_pio: initialized sunXi PIO driver 4737 [ 0.312051] sun50iw9p1-pinctrl pio: initialized sunXi PIO driver 4738 [ 0.316005] iommu: Adding device 1c0e000.ve to group 0 4739 [ 0.316524] iommu: Adding device 1c00000.vp9 to group 0 4740 [ 0.327918] iommu: Adding device 1000000.disp to group 0 4741 [ 0.329325] iommu: Adding device 1480000.g2d to group 0 4742 [ 0.332536] iommu: Adding device csi0 to group 0 4743 [ 0.332989] iommu: Adding device csi1 to group 0 4744 [ 0.334193] iommu: Adding device 6600800.vind:scaler@0 to group 0 4745 [ 0.334491] iommu: Adding device 6600800.vind:scaler@1 to group 0 4746 [ 0.334795] iommu: Adding device 6600800.vind:scaler@2 to group 0 4747 [ 0.335085] iommu: Adding device 6600800.vind:scaler@3 to group 0 4748 [ 0.335375] iommu: Adding device 6600800.vind:scaler@4 to group 0 4749 [ 0.335667] iommu: Adding device 6600800.vind:scaler@5 to group 0 4750 [ 0.336601] iommu: Adding device vinc0 to group 0 4751 [ 0.337176] iommu: Adding device vinc1 to group 0 4752 [ 0.338627] iommu: Adding device 1420000.deinterlace to group 0 4753 [ 0.381265] HugeTLB registered 2 MB page size, pre-allocated 0 pages 4754 [ 0.437401] raid6: int64x1 gen() 391 MB/s 4755 [ 0.494198] raid6: int64x1 xor() 362 MB/s 4756 [ 0.551001] raid6: int64x2 gen() 591 MB/s 4757 [ 0.607743] raid6: int64x2 xor() 512 MB/s 4758 [ 0.664516] raid6: int64x4 gen() 840 MB/s 4759 [ 0.721310] raid6: int64x4 xor() 629 MB/s 4760 [ 0.778092] raid6: int64x8 gen() 965 MB/s 4761 [ 0.834848] raid6: int64x8 xor() 655 MB/s 4762 [ 0.891626] raid6: neonx1 gen() 648 MB/s 4763 [ 0.948406] raid6: neonx1 xor() 641 MB/s 4764 [ 1.005173] raid6: neonx2 gen() 976 MB/s 4765 [ 1.061984] raid6: neonx2 xor() 820 MB/s 4766 [ 1.118763] raid6: neonx4 gen() 1287 MB/s 4767 [ 1.175509] raid6: neonx4 xor() 965 MB/s 4768 [ 1.232299] raid6: neonx8 gen() 1324 MB/s 4769 [ 1.289082] raid6: neonx8 xor() 991 MB/s 4770 [ 1.289088] raid6: using algorithm neonx8 gen() 1324 MB/s 4771 [ 1.289093] raid6: .... xor() 991 MB/s, rmw enabled 4772 [ 1.289099] raid6: using intx1 recovery algorithm 4773 [ 1.289234] pwm module init! 4774 [ 1.293531] sunxi-pm debug v3.10 4775 [ 1.294638] SCSI subsystem initialized 4776 [ 1.295261] sunxi_spi_probe()2299 - [spi0] SPI MASTER MODE 4777 [ 1.295345] sunxi_spi_request_gpio()1927 - [spi0] Pinctrl init spi0 4778 [ 1.295466] sunxi_spi_clk_init()1977 - [spi0] mclk 100000000 4779 [ 1.295982] spi spi0: master is unqueued, this is deprecated 4780 [ 1.296291] sunxi_spi_probe()2379 - [spi0]: driver probe succeed, base ffffff8008066000, irq 294 4781 [ 1.296861] sunxi_spi_probe()2299 - [spi1] SPI MASTER MODE 4782 [ 1.296943] sunxi_spi_request_gpio()1927 - [spi1] Pinctrl init spi1 4783 [ 1.297058] sunxi_spi_clk_init()1977 - [spi1] mclk 100000000 4784 [ 1.297525] spi spi1: master is unqueued, this is deprecated 4785 [ 1.297869] sunxi_spi_probe()2379 - [spi1]: driver probe succeed, base ffffff8008068000, irq 295 4786 [ 1.298680] usbcore: registered new interface driver usbfs 4787 [ 1.298773] usbcore: registered new interface driver hub 4788 [ 1.298845] usbcore: registered new device driver usb 4789 [ 1.299003] sunxi_i2c_adap_init()2522 - init 4790 [ 1.299574] sunxi_i2c_probe()2208 - [i2c3] warning: failed to get regulator id 4791 [ 1.299662] sunxi_i2c_probe()2270 - [i2c3] twi_drv_used = 0 4792 [ 1.299670] sunxi_i2c_probe()2274 - [i2c3] twi_pkt_interval = 0 4793 [ 1.299685] twi3 supply twi not found, using dummy regulator 4794 [ 1.299761] twi_request_gpio()451 - [i2c3] init name: twi3 4795 [ 1.300506] sunxi_i2c_probe()2208 - [i2c5] warning: failed to get regulator id 4796 [ 1.300585] sunxi_i2c_probe()2270 - [i2c5] twi_drv_used = 0 4797 [ 1.300592] sunxi_i2c_probe()2274 - [i2c5] twi_pkt_interval = 0 4798 [ 1.300606] twi5 supply twi not found, using dummy regulator 4799 [ 1.300685] twi_request_gpio()451 - [i2c5] init name: twi5 4800 [ 1.301170] axp20x-i2c 5-0036: AXP20x variant AXP806 found 4801 [ 1.319867] random: fast init done 4802 [ 1.331019] axp20x-i2c 5-0036: AXP20X driver loaded 4803 [ 1.331548] media: Linux media interface: v0.10 4804 [ 1.331628] Linux video capture interface: v2.00 4805 [ 1.332254] Advanced Linux Sound Architecture Driver Initialized. 4806 [ 1.332978] Bluetooth: Core ver 2.22 4807 [ 1.333045] NET: Registered protocol family 31 4808 [ 1.333051] Bluetooth: HCI device and connection manager initialized 4809 [ 1.333066] Bluetooth: HCI socket layer initialized 4810 [ 1.333078] Bluetooth: L2CAP socket layer initialized 4811 [ 1.333117] Bluetooth: SCO socket layer initialized 4812 [ 1.333961] [DISP]disp_module_init 4813 [ 1.335211] [DISP] parser_disp_init_para,line:1403: 4814 [ 1.335219] of_property_read fb0_width fail 4815 [ 1.335231] [DISP] disp_init,line:2215: 4816 [ 1.335237] smooth display screen:0 type:4 mode:10 4817 [ 1.352707] [DISP]disp_module_init finish 4818 [ 1.353576] clocksource: Switched to clocksource arch_sys_counter 4819 [ 1.353836] VFS: Disk quotas dquot_6.6.0 4820 [ 1.353924] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 4821 [ 1.354663] Console: switching to colour frame buffer device 240x67 4822 [ 1.398069] NET: Registered protocol family 2 4823 [ 1.398194] IP idents hash table entries: 16384 (order: 5, 131072 bytes) 4824 [ 1.420504] TCP established hash table entries: 8192 (order: 4, 65536 bytes) 4825 [ 1.420578] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) 4826 [ 1.420700] TCP: Hash tables configured (established 8192 bind 8192) 4827 [ 1.420788] UDP hash table entries: 512 (order: 2, 16384 bytes) 4828 [ 1.420816] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) 4829 [ 1.421140] NET: Registered protocol family 1 4830 [ 1.421730] RPC: Registered named UNIX socket transport module. 4831 [ 1.421735] RPC: Registered udp transport module. 4832 [ 1.421738] RPC: Registered tcp transport module. 4833 [ 1.421741] RPC: Registered tcp NFSv4.1 backchannel transport module. 4834 [ 1.421982] Trying to unpack rootfs image as initramfs... 4835 [ 2.176299] Freeing initrd memory: 17256K 4836 [ 2.177391] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available 4837 [ 2.181283] audit: initializing netlink subsys (disabled) 4838 [ 2.181341] audit: type=2000 audit(2.176:1): initialized 4839 [ 2.182247] workingset: timestamp_bits=45 max_order=18 bucket_order=0 4840 [ 2.193379] DLM installed 4841 [ 2.195253] squashfs: version 4.0 (2009/01/31) Phillip Lougher 4842 [ 2.195608] Registering sdcardfs 0.1 4843 [ 2.196095] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 4844 [ 2.197649] ntfs: driver 2.1.32 [Flags: R/W]. 4845 [ 2.204503] NET: Registered protocol family 38 4846 [ 2.204869] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) 4847 [ 2.205012] io scheduler noop registered 4848 [ 2.205021] io scheduler deadline registered 4849 [ 2.205187] io scheduler cfq registered (default) 4850 [ 2.207065] failed to get easy_light_used assign 4851 [ 2.207077] failed to get normal led pin assign 4852 [ 2.207082] failed to get standby led pin assign 4853 [ 2.207087] failed to get standby led pin assign 4854 [ 2.207093] these is zero number for gpio 4855 [ 2.207097] gpio_init finish with uesd 4856 [ 2.210188] uart uart0: get regulator failed 4857 [ 2.210559] uart0: ttyS0 at MMIO 0x5000000 (irq = 280, base_baud = 1500000) is a SUNXI 4858 [ 2.210585] sw_console_setup()1706 - console setup baud 115200 parity n bits 8, flow n 4859 [ 2.210703] console [ttyS0] enabled 4860 [ 2.211592] uart uart1: get regulator failed 4861 [ 2.211786] uart1: ttyS1 at MMIO 0x5000400 (irq = 281, base_baud = 1500000) is a SUNXI 4862 [ 2.212494] uart uart5: get regulator failed 4863 [ 2.212677] uart5: ttyS5 at MMIO 0x5001400 (irq = 282, base_baud = 1500000) is a SUNXI 4864 [ 2.213975] misc dump reg init 4865 [ 2.215108] deinterlace 1420000.deinterlace: version[1.0.0], ip=0x300100 4866 [ 2.215446] Unable to detect cache hierarchy for CPU 0 4867 [ 2.229903] brd: module loaded 4868 [ 2.238374] loop: module loaded 4869 [ 2.238564] [NAND][NE] Not found valid nand node on dts 4870 [ 2.239152] Get boot type cmd line fail 4871 [ 2.239735] sunxi-bt soc@03000000:bt: Missing bt_power. 4872 [ 2.239746] sunxi-bt soc@03000000:bt: bt_power_name ((null)) 4873 [ 2.239753] sunxi-bt soc@03000000:bt: Missing bt_io_regulator. 4874 [ 2.239760] sunxi-bt soc@03000000:bt: io_regulator_name ((null)) 4875 [ 2.239815] sunxi-bt soc@03000000:bt: bt_rst gpio=211 mul-sel=1 pull=-1 drv_level=-1 data=0 4876 [ 2.239885] sunxi-bt soc@03000000:bt: devm_pinctrl_get() failed! 4877 [ 2.240792] sunxi-wlan soc@03000000:wlan: wlan_busnum (1) 4878 [ 2.240804] sunxi-wlan soc@03000000:wlan: Missing wlan_power. 4879 [ 2.240812] sunxi-wlan soc@03000000:wlan: wlan_power_name ((null)) 4880 [ 2.240819] sunxi-wlan soc@03000000:wlan: Missing wlan_io_regulator. 4881 [ 2.240826] sunxi-wlan soc@03000000:wlan: io_regulator_name ((null)) 4882 [ 2.240858] sunxi-wlan soc@03000000:wlan: wlan_regon gpio=210 mul-sel=1 pull=-1 drv_level=-1 data=0 4883 [ 2.240891] sunxi-wlan soc@03000000:wlan: get gpio chip_en failed 4884 [ 2.240899] sunxi-wlan soc@03000000:wlan: get gpio power_en failed 4885 [ 2.240916] sunxi-wlan soc@03000000:wlan: wlan_hostwake gpio=207 mul-sel=6 pull=-1 drv_level=-1 data=0 4886 [ 2.241850] [ADDR_MGT] addr_mgt_probe: success. 4887 [ 2.248669] tun: Universal TUN/TAP device driver, 1.6 4888 [ 2.248681] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 4889 [ 2.250720] gmac-power0: NULL 4890 [ 2.250730] gmac-power1: NULL 4891 [ 2.250736] gmac-power2: NULL 4892 [ 2.251659] PPP generic driver version 2.4.2 4893 [ 2.251945] PPP BSD Compression module registered 4894 [ 2.251954] PPP Deflate Compression module registered 4895 [ 2.251980] PPP MPPE Compression module registered 4896 [ 2.251989] NET: Registered protocol family 24 4897 [ 2.252024] PPTP driver version 0.8.5 4898 [ 2.252376] usbcore: registered new interface driver r8152 4899 [ 2.252452] usbcore: registered new interface driver asix 4900 [ 2.252547] usbcore: registered new interface driver ax88179_178a 4901 [ 2.252621] usbcore: registered new interface driver cdc_ether 4902 [ 2.252683] usbcore: registered new interface driver net1080 4903 [ 2.252751] usbcore: registered new interface driver cdc_subset 4904 [ 2.252812] usbcore: registered new interface driver zaurus 4905 [ 2.252897] usbcore: registered new interface driver cdc_ncm 4906 [ 2.252904] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 4907 [ 2.253270] get drv_vbus is fail, 84 4908 [ 2.253279] get ehci0-controller, regulator_io is no nocare 4909 [ 2.253543] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffff800992ac30, 0x:ffffff80081c1000, irq_no:11e 4910 [ 2.253549] [sunxi-ehci0]: Not init ehci0 4911 [ 2.253781] get ehci1-controller, regulator_io is no nocare 4912 [ 2.253992] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xffffff800992a8e8, 0x:ffffff80081c5000, irq_no:120 4913 [ 2.254050] sunxi-ehci 5200000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 4914 [ 2.254077] sunxi-ehci 5200000.ehci1-controller: new USB bus registered, assigned bus number 1 4915 [ 2.254622] sunxi-ehci 5200000.ehci1-controller: irq 288, io mem 0xffffff80081c5000 4916 [ 2.266929] sunxi-ehci 5200000.ehci1-controller: USB 0.0 started, EHCI 1.00 4917 [ 2.267218] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 4918 [ 2.267227] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 4919 [ 2.267235] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 4920 [ 2.267242] usb usb1: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 4921 [ 2.267249] usb usb1: SerialNumber: sunxi-ehci 4922 [ 2.268117] hub 1-0:1.0: USB hub found 4923 [ 2.268163] hub 1-0:1.0: 1 port detected 4924 [ 2.268836] get drv_vbus is fail, 84 4925 [ 2.268844] get ehci2-controller, regulator_io is no nocare 4926 [ 2.269091] [sunxi-ehci2]: probe, pdev->name: 5310000.ehci2-controller, sunxi_ehci: 0xffffff800992a5a0, 0x:ffffff80081cf000, irq_no:122 4927 [ 2.269143] sunxi-ehci 5310000.ehci2-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 4928 [ 2.269169] sunxi-ehci 5310000.ehci2-controller: new USB bus registered, assigned bus number 2 4929 [ 2.269444] sunxi-ehci 5310000.ehci2-controller: irq 290, io mem 0xffffff80081cf000 4930 [ 2.280267] sunxi-ehci 5310000.ehci2-controller: USB 0.0 started, EHCI 1.00 4931 [ 2.280504] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 4932 [ 2.280513] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 4933 [ 2.280520] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 4934 [ 2.280527] usb usb2: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 4935 [ 2.280534] usb usb2: SerialNumber: sunxi-ehci 4936 [ 2.281378] hub 2-0:1.0: USB hub found 4937 [ 2.281421] hub 2-0:1.0: 1 port detected 4938 [ 2.282089] get drv_vbus is fail, 84 4939 [ 2.282097] get ehci3-controller, regulator_io is no nocare 4940 [ 2.282342] [sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffff800992a258, 0x:ffffff80081d9000, irq_no:124 4941 [ 2.282405] sunxi-ehci 5311000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 4942 [ 2.282431] sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 3 4943 [ 2.282717] sunxi-ehci 5311000.ehci3-controller: irq 292, io mem 0xffffff80081d9000 4944 [ 2.293595] sunxi-ehci 5311000.ehci3-controller: USB 0.0 started, EHCI 1.00 4945 [ 2.293782] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 4946 [ 2.293791] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 4947 [ 2.293799] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 4948 [ 2.293806] usb usb3: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 4949 [ 2.293813] usb usb3: SerialNumber: sunxi-ehci 4950 [ 2.294681] hub 3-0:1.0: USB hub found 4951 [ 2.294727] hub 3-0:1.0: 1 port detected 4952 [ 2.295653] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 4953 [ 2.296022] get drv_vbus is fail, 84 4954 [ 2.296030] get ohci0-controller, regulator_io is no nocare 4955 [ 2.296362] [sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffff800992b950 4956 [ 2.296367] [sunxi-ohci0]: Not init ohci0 4957 [ 2.296487] get ohci1-controller, regulator_io is no nocare 4958 [ 2.296652] hci: request ohci1-controller gpio:80 4959 [ 2.296729] [sunxi-ohci1]: probe, pdev->name: 5200000.ohci1-controller, sunxi_ohci: 0xffffff800992b608 4960 [ 2.296780] sunxi-ohci 5200000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 4961 [ 2.296806] sunxi-ohci 5200000.ohci1-controller: new USB bus registered, assigned bus number 4 4962 [ 2.296885] sunxi-ohci 5200000.ohci1-controller: irq 289, io mem 0x00000000 4963 [ 2.357785] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 4964 [ 2.357797] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 4965 [ 2.357804] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 4966 [ 2.357811] usb usb4: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 4967 [ 2.357818] usb usb4: SerialNumber: sunxi-ohci 4968 [ 2.358708] hub 4-0:1.0: USB hub found 4969 [ 2.358756] hub 4-0:1.0: 1 port detected 4970 [ 2.359439] get drv_vbus is fail, 84 4971 [ 2.359447] get ohci2-controller, regulator_io is no nocare 4972 [ 2.359782] [sunxi-ohci2]: probe, pdev->name: 5310000.ohci2-controller, sunxi_ohci: 0xffffff800992b2c0 4973 [ 2.359832] sunxi-ohci 5310000.ohci2-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 4974 [ 2.359858] sunxi-ohci 5310000.ohci2-controller: new USB bus registered, assigned bus number 5 4975 [ 2.359935] sunxi-ohci 5310000.ohci2-controller: irq 291, io mem 0x00000000 4976 [ 2.417759] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 4977 [ 2.417769] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 4978 [ 2.417777] usb usb5: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 4979 [ 2.417784] usb usb5: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 4980 [ 2.417791] usb usb5: SerialNumber: sunxi-ohci 4981 [ 2.418665] hub 5-0:1.0: USB hub found 4982 [ 2.418712] hub 5-0:1.0: 1 port detected 4983 [ 2.419383] get drv_vbus is fail, 84 4984 [ 2.419391] get ohci3-controller, regulator_io is no nocare 4985 [ 2.419729] [sunxi-ohci3]: probe, pdev->name: 5311000.ohci3-controller, sunxi_ohci: 0xffffff800992af78 4986 [ 2.419779] sunxi-ohci 5311000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 4987 [ 2.419808] sunxi-ohci 5311000.ohci3-controller: new USB bus registered, assigned bus number 6 4988 [ 2.419885] sunxi-ohci 5311000.ohci3-controller: irq 293, io mem 0x00000000 4989 [ 2.477754] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 4990 [ 2.477764] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 4991 [ 2.477771] usb usb6: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 4992 [ 2.477779] usb usb6: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 4993 [ 2.477785] usb usb6: SerialNumber: sunxi-ohci 4994 [ 2.478632] hub 6-0:1.0: USB hub found 4995 [ 2.478678] hub 6-0:1.0: 1 port detected 4996 [ 2.479616] ohci-platform: OHCI generic platform driver 4997 [ 2.480358] usbcore: registered new interface driver uas 4998 [ 2.480526] usbcore: registered new interface driver usb-storage 4999 [ 2.480618] usbcore: registered new interface driver ums-alauda 5000 [ 2.480699] usbcore: registered new interface driver ums-cypress 5001 [ 2.480772] usbcore: registered new interface driver ums-datafab 5002 [ 2.480840] usbcore: registered new interface driver ums_eneub6250 5003 [ 2.480914] usbcore: registered new interface driver ums-freecom 5004 [ 2.480988] usbcore: registered new interface driver ums-isd200 5005 [ 2.481057] usbcore: registered new interface driver ums-jumpshot 5006 [ 2.481127] usbcore: registered new interface driver ums-karma 5007 [ 2.481196] usbcore: registered new interface driver ums-onetouch 5008 [ 2.481293] usbcore: registered new interface driver ums-realtek 5009 [ 2.481375] usbcore: registered new interface driver ums-sddr09 5010 [ 2.481456] usbcore: registered new interface driver ums-sddr55 5011 [ 2.481530] usbcore: registered new interface driver ums-usbat 5012 [ 2.481679] usb_serial_number:20080411 5013 [ 2.482917] input: sunxi-keyboard as /devices/virtual/input/input0 5014 [ 2.483538] usbcore: registered new interface driver xpad 5015 [ 2.483708] usbcore: registered new interface driver usb_acecad 5016 [ 2.483807] usbcore: registered new interface driver aiptek 5017 [ 2.483894] usbcore: registered new interface driver gtco 5018 [ 2.483974] usbcore: registered new interface driver hanwang 5019 [ 2.484055] usbcore: registered new interface driver kbtab 5020 [ 2.484523] axp2101_pek: axp2101-pek can not register without irq 5021 [ 2.484545] axp2101-pek: probe of axp2101-pek.0 failed with error -22 5022 [ 2.485934] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0 5023 [ 2.486005] sunxi-rtc rtc: RTC enabled 5024 [ 2.486472] i2c /dev entries driver 5025 [ 2.487521] lirc_dev: IR Remote Control driver registered, major 244 5026 [ 2.487532] IR NEC protocol handler initialized 5027 [ 2.487538] IR RC5(x/sz) protocol handler initialized 5028 [ 2.487544] IR RC6 protocol handler initialized 5029 [ 2.487550] IR JVC protocol handler initialized 5030 [ 2.487555] IR Sony protocol handler initialized 5031 [ 2.487561] IR SANYO protocol handler initialized 5032 [ 2.487567] IR Sharp protocol handler initialized 5033 [ 2.487573] IR MCE Keyboard/mouse protocol handler initialized 5034 [ 2.487578] IR LIRC bridge handler initialized 5035 [ 2.487584] IR XMP protocol handler initialized 5036 [ 2.488107] sunxi_ir_startup: get ir protocol failed 5037 [ 2.488149] 7040000.s_cir supply ir0 not found, using dummy regulator 5038 [ 2.488335] Registered IR keymap rc_map_sunxi 5039 [ 2.488734] input: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0/input1 5040 [ 2.488964] rc rc0: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0 5041 [ 2.489991] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input2 5042 [ 2.490615] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-rc-recv) registered at minor = 0 5043 [ 2.491320] sunxi cedar version 0.1 5044 [ 2.491509] VE: install start!!! 5045 5046 [ 2.491695] cedar_ve: cedar-ve the get irq is 278 5047 [ 2.492315] VE: get debugfs_mpp_root is NULL, please check mpp 5048 5049 [ 2.492328] VE: sunxi ve debug register driver failed! 5050 5051 [ 2.495523] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) 5052 [ 2.496822] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com 5053 [ 2.497216] Bluetooth: HCI UART driver ver 2.3 5054 [ 2.497227] Bluetooth: HCI UART protocol H4 registered 5055 [ 2.497233] Bluetooth: HCI UART protocol LL registered 5056 [ 2.497238] Bluetooth: HCI UART protocol Three-wire (H5) registered 5057 [ 2.501443] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 5058 [ 2.501460] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 5059 [ 2.501473] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 5060 [ 2.501485] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 5061 [ 2.501497] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 5062 [ 2.501509] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 5063 [ 2.501919] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 5064 [ 2.502028] sunxi-mmc sdc0: ***ctl-spec-caps*** 8 5065 [ 2.502231] sunxi-mmc sdc0: No vmmc regulator found 5066 [ 2.502238] sunxi-mmc sdc0: No vqmmc regulator found 5067 [ 2.502244] sunxi-mmc sdc0: No vdmmc regulator found 5068 [ 2.502250] sunxi-mmc sdc0: No vd33sw regulator found 5069 [ 2.502257] sunxi-mmc sdc0: No vd18sw regulator found 5070 [ 2.502263] sunxi-mmc sdc0: No vq33sw regulator found 5071 [ 2.502269] sunxi-mmc sdc0: No vq18sw regulator found 5072 [ 2.502988] sunxi-mmc sdc0: set host busy 5073 [ 2.503089] sunxi-mmc sdc0: Got CD GPIO 5074 [ 2.503446] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 5075 [ 2.503481] sunxi-mmc sdc0: no vqmmc,Check if there is regulator 5076 [ 2.516936] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5077 [ 2.537167] sunxi-mmc sdc0: detmode:gpio irq 5078 [ 2.537198] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5079 [ 2.539695] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5080 [ 2.541065] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 5081 [ 2.541206] sunxi-mmc sdc1: ***ctl-spec-caps*** 8 5082 [ 2.541347] sunxi-mmc sdc1: No vmmc regulator found 5083 [ 2.541353] sunxi-mmc sdc1: No vqmmc regulator found 5084 [ 2.541360] sunxi-mmc sdc1: No vdmmc regulator found 5085 [ 2.541366] sunxi-mmc sdc1: No vd33sw regulator found 5086 [ 2.541372] sunxi-mmc sdc1: No vd18sw regulator found 5087 [ 2.541378] sunxi-mmc sdc1: No vq33sw regulator found 5088 [ 2.541384] sunxi-mmc sdc1: No vq18sw regulator found 5089 [ 2.541756] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5090 [ 2.542140] sunxi-mmc sdc1: set host busy 5091 [ 2.542223] mmc:failed to get gpios 5092 [ 2.542515] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 5093 [ 2.544240] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5094 [ 2.556988] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5095 [ 2.567590] mmc0: host does not support reading read-only switch, assuming write-enable 5096 [ 2.569443] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 5097 [ 2.569513] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 5098 [ 2.569656] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B 5099 [ 2.569747] mmc0: new high speed SDXC card at address 0001 5100 [ 2.570802] mmcblk0: mmc0:0001 SD16G 59.5 GiB 5101 [ 2.572337] mmcblk0: p1 5102 [ 2.573637] sunxi-mmc sdc1: detmode:manually by software 5103 [ 2.576045] ledtrig-cpu: registered to indicate activity on CPUs 5104 [ 2.576546] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 5105 [ 2.577391] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 5106 [ 2.577425] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5107 [ 2.579918] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5108 [ 2.581843] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 5109 [ 2.582681] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 5110 [ 2.583518] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 5111 [ 2.584356] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 5112 [ 2.584394] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B 5113 [ 2.584398] sunxi_emce_hw_init()368Unable to get pclk, return fffffffe 5114 [ 2.584402] sunxi_emce_probe()590emce hw init failed! 5115 [ 2.584429] emce: probe of emce failed with error -2 5116 [ 2.584698] hidraw: raw HID events driver (C) Jiri Kosina 5117 [ 2.589321] usbcore: registered new interface driver usbhid 5118 [ 2.589329] usbhid: USB HID core driver 5119 [ 2.590831] optee: probing for conduit method from DT. 5120 [ 2.590844] optee: api uid mismatch 5121 [ 2.591387] usbcore: registered new interface driver snd-usb-audio 5122 [ 2.592969] [sunxi_hdmi_codec_init] driver and deivce register finished. 5123 [ 2.594731] [sunxi_internal_codec_probe]:get audio avcc failed 5124 [ 2.594772] [sunxi_internal_codec_probe]:get audio vcc3v3-audio failed 5125 [ 2.595003] lineout_vol:26, linein_gain:3, fmin_gain:3, digital_vol:0, adcdrc_cfg:0, adchpf_cfg:0, dacdrc_cfg:0, dachpf_cfg:0, ramp_func_used:1, pa_msleep_time:100, pa_ctl_level:1, gpio-spk:0 5126 [ 2.597532] sunxi-codec-machine sndcodec: sun50iw9-codec <-> cpudai mapping ok 5127 [ 2.599510] sndhdmi sndhdmi: ASoC: CPU DAI (null) not registered 5128 [ 2.599523] sndhdmi sndhdmi: snd_soc_register_card() failed: -517 5129 [ 2.601936] sunxi-ahub-cpudai 5097000.cpudai3-controller: ahub cpudai id invalid 5130 [ 2.601959] sunxi-ahub-cpudai: probe of 5097000.cpudai3-controller failed with error -22 5131 [ 2.606020] sndahub sndahub: sunxi-ahub-aif1 <-> 5097000.cpudai0-controller mapping ok 5132 [ 2.607650] sndahub sndahub: sunxi-ahub-aif2 <-> 5097000.cpudai1-controller mapping ok 5133 [ 2.609571] sndahub sndahub: sunxi-ahub-aif3 <-> 5097000.cpudai2-controller mapping ok 5134 [ 2.612620] pktgen: Packet Generator for packet performance testing. Version: 2.75 5135 [ 2.613063] u32 classifier 5136 [ 2.613070] Actions configured 5137 [ 2.613084] Netfilter messages via NETLINK v0.30. 5138 [ 2.613112] nfnl_acct: registering with nfnetlink. 5139 [ 2.613436] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) 5140 [ 2.613748] ctnetlink v0.93: registering with nfnetlink. 5141 [ 2.614517] xt_time: kernel timezone is -0000 5142 [ 2.614541] IPVS: Registered protocols (TCP, UDP) 5143 [ 2.614649] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) 5144 [ 2.614777] IPVS: Creating netns size=1928 id=0 5145 [ 2.614915] IPVS: ipvs loaded. 5146 [ 2.614923] IPVS: [rr] scheduler registered. 5147 [ 2.615020] ipip: IPv4 and MPLS over IPv4 tunneling driver 5148 [ 2.615732] gre: GRE over IPv4 demultiplexor driver 5149 [ 2.615741] ip_gre: GRE over IPv4 tunneling driver 5150 [ 2.617217] IPv4 over IPsec tunneling driver 5151 [ 2.618081] ip_tables: (C) 2000-2006 Netfilter Core Team 5152 [ 2.618374] arp_tables: arp_tables: (C) 2002 David S. Miller 5153 [ 2.618439] Initializing XFRM netlink socket 5154 [ 2.618473] IPsec XFRM device driver 5155 [ 2.619316] NET: Registered protocol family 10 5156 [ 2.621244] mip6: Mobile IPv6 5157 [ 2.621282] ip6_tables: (C) 2000-2006 Netfilter Core Team 5158 [ 2.622597] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver 5159 [ 2.624303] NET: Registered protocol family 17 5160 [ 2.624344] NET: Registered protocol family 15 5161 [ 2.624512] Bridge firewalling registered 5162 [ 2.624645] Bluetooth: RFCOMM TTY layer initialized 5163 [ 2.624662] Bluetooth: RFCOMM socket layer initialized 5164 [ 2.624692] Bluetooth: RFCOMM ver 1.11 5165 [ 2.624706] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 5166 [ 2.624711] Bluetooth: BNEP filters: protocol multicast 5167 [ 2.624725] Bluetooth: BNEP socket layer initialized 5168 [ 2.624730] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 5169 [ 2.624742] Bluetooth: HIDP socket layer initialized 5170 [ 2.624829] l2tp_core: L2TP core driver, V2.0 5171 [ 2.624843] l2tp_ppp: PPPoL2TP kernel driver, V2.0 5172 [ 2.624849] 8021q: 802.1Q VLAN Support v1.8 5173 [ 2.625048] sctp: Hash tables configured (bind 256/256) 5174 [ 2.625633] Key type dns_resolver registered 5175 [ 2.625774] Registered cp15_barrier emulation handler 5176 [ 2.625790] Registered setend emulation handler 5177 [ 2.626760] registered taskstats version 1 5178 [ 2.638328] zswap: default zpool zbud not available 5179 [ 2.638336] zswap: pool creation failed 5180 [ 2.641182] Btrfs loaded, crc32c=crc32c-arm64-hw 5181 [ 2.641924] HDMI 2.0 driver init start! 5182 [ 2.641939] boot_hdmi=true 5183 [ 2.642724] Can not find the node of esm 5184 [ 2.642744] ERROR: pinctrl_get for HDMI2.0 DDC fail 5185 [ 2.642832] Get hdmi_power0:vcc-hdmi 5186 [ 2.642873] 6000000.hdmi supply vcc-hdmi not found, using dummy regulator 5187 [ 2.643061] Get hdmi_power1:vdd-hdmi 5188 [ 2.643085] 6000000.hdmi supply vdd-hdmi not found, using dummy regulator 5189 [ 2.644764] hdmi_cec_init 5190 [ 2.645234] [DISP] disp_device_attached,line:146: 5191 [ 2.645243] attached ok, mgr0<-->device0, type=4 5192 [ 2.645254] [HDMI receive params]: tv mode: 0xa format:0x0 data bits:0x0 eotf:0x0 cs:0x0 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8 5193 [ 2.645265] [DISP] disp_hdmi_set_mode,line:648: 5194 [ 2.645270] hdmi_set_mode is null! 5195 [ 2.647260] HDMI2.0 module init end 5196 [ 2.658460] sunxi-thermal 5070400.thermal_sensor: avcc is not calibrated 5197 [ 2.661895] cpu cpu1: opp_list_debug_create_link: Failed to create link 5198 [ 2.661907] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12) 5199 [ 2.661938] cpu cpu2: opp_list_debug_create_link: Failed to create link 5200 [ 2.661946] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12) 5201 [ 2.661976] cpu cpu3: opp_list_debug_create_link: Failed to create link 5202 [ 2.661983] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12) 5203 [ 2.664324] sndhdmi sndhdmi: audiohdmi-dai <-> sunxi-ahub-cpu-aif1 mapping ok 5204 [ 2.665265] get det_vbus is fail, 84 5205 [ 2.665272] get id is fail, 84 5206 [ 2.665750] sunxi-rtc rtc: setting system clock to 1970-01-01 00:10:40 UTC (640) 5207 [ 2.669552] ALSA device list: 5208 [ 2.669560] #0: audiocodec 5209 [ 2.669564] #1: sndahub 5210 [ 2.669568] #2: sndhdmi 5211 [ 2.671225] Freeing unused kernel memory: 3008K 5212 [ 2.716495] random: systemd-udevd: uninitialized urandom read (16 bytes read) 5213 [ 2.718640] random: systemd-udevd: uninitialized urandom read (16 bytes read) 5214 [ 2.721557] random: systemd-udevd: uninitialized urandom read (16 bytes read) 5215 [ 2.790590] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device connect 5216 [ 2.957015] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device disconnect 5217 [ 3.050291] HDMI cable is connected 5218 [ 3.310321] usb 4-1: new full-speed USB device number 2 using sunxi-ohci 5219 [ 3.530364] usb 4-1: New USB device found, idVendor=24ae, idProduct=2013 5220 [ 3.530373] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 5221 [ 3.530378] usb 4-1: Product: Rapoo 2.4G Wireless Device 5222 [ 3.530383] usb 4-1: Manufacturer: RAPOO 5223 [ 3.538164] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.0/0003:24AE:2013.0001/input/input3 5224 [ 3.538556] hid-generic 0003:24AE:2013.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input0 5225 [ 3.544172] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.1/0003:24AE:2013.0002/input/input4 5226 [ 3.601540] hid-generic 0003:24AE:2013.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input1 5227 [ 3.605612] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.2/0003:24AE:2013.0003/input/input5 5228 [ 3.662259] hid-generic 0003:24AE:2013.0003: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input2 5229 [ 4.184305] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) 5230 [ 5.107278] systemd[1]: System time before build time, advancing clock. 5231 [ 5.111989] cgroup: cgroup2: unknown option "nsdelegate,memory_recursiveprot" 5232 [ 5.112548] cgroup: cgroup2: unknown option "nsdelegate" 5233 [ 5.132864] systemd[1]: systemd 252.12-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) 5234 [ 5.132888] systemd[1]: Detected architecture arm64. 5235 [ 5.134059] systemd[1]: Warning! Reported kernel version 4.9.318-legacy-sun50iw9 is older than systemd's required baseline kernel version 4.15. Your mileage may vary. 5236 [ 5.144226] systemd[1]: Hostname set to <opi>. 5237 [ 5.171708] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation 5238 [ 6.785192] (sd-execut[1457]: /usr/lib/systemd/system-generators/netplan failed with exit status 1. 5239 [ 6.827008] 5240 insmod_device_driver 5241 5242 [ 6.827282] device_chose finished 124! 5243 [ 7.151137] systemd[1]: /lib/systemd/system/hdmi-audio.service:10: Support for option SysVStartPriority= has been removed and it is ignored 5244 [ 7.389532] systemd[1]: Queued start job for default target graphical.target. 5245 [ 7.396979] systemd[1]: Created slice system-getty.slice - Slice /system/getty. 5246 [ 7.399185] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. 5247 [ 7.401496] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. 5248 [ 7.402807] systemd[1]: Created slice user.slice - User and Session Slice. 5249 [ 7.403444] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. 5250 [ 7.404067] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 5251 [ 7.404407] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. 5252 [ 7.404970] systemd[1]: Reached target slices.target - Slice Units. 5253 [ 7.405321] systemd[1]: Reached target swap.target - Swaps. 5254 [ 7.405576] systemd[1]: Reached target time-set.target - System Time Set. 5255 [ 7.406053] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. 5256 [ 7.423447] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket. 5257 [ 7.424620] systemd[1]: Listening on syslog.socket - Syslog Socket. 5258 [ 7.425513] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. 5259 [ 7.426148] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. 5260 [ 7.427828] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. 5261 [ 7.428788] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). 5262 [ 7.429848] systemd[1]: Listening on systemd-journald.socket - Journal Socket. 5263 [ 7.432086] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. 5264 [ 7.432982] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. 5265 [ 7.437017] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... 5266 [ 7.441506] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... 5267 [ 7.446652] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... 5268 [ 7.447895] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 5269 [ 7.448829] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). 5270 [ 7.456252] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... 5271 [ 7.461856] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... 5272 [ 7.467672] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... 5273 [ 7.475944] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... 5274 [ 7.482378] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 5275 [ 7.497854] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... 5276 [ 7.505020] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 5277 [ 7.513050] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... 5278 [ 7.520455] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 5279 [ 7.521688] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). 5280 [ 7.530978] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... 5281 [ 7.537310] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... 5282 [ 7.542303] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... 5283 [ 7.552627] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. 5284 [ 7.554939] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. 5285 [ 7.557337] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. 5286 [ 7.559936] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. 5287 [ 7.563508] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. 5288 [ 7.567852] systemd[1]: modprobe@configfs.service: Deactivated successfully. 5289 [ 7.568459] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. 5290 [ 7.571252] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 5291 [ 7.572800] fuse init (API version 7.26) 5292 [ 7.613687] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro 5293 [ 7.617515] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 5294 [ 7.622990] systemd[1]: modprobe@drm.service: Deactivated successfully. 5295 [ 7.623514] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. 5296 [ 7.625599] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 5297 [ 7.626142] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 5298 [ 7.628359] systemd[1]: modprobe@fuse.service: Deactivated successfully. 5299 [ 7.628905] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. 5300 [ 7.631043] systemd[1]: modprobe@loop.service: Deactivated successfully. 5301 [ 7.631176] fbtft: module is from the staging directory, the quality is unknown, you have been warned. 5302 [ 7.631706] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 5303 [ 7.634441] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. 5304 [ 7.642017] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... 5305 [ 7.647591] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned. 5306 [ 7.648414] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 5307 [ 7.648423] spidev spi1.1: dh2228fv spi1.1 16777kHz 8 bits mode=0x00 5308 [ 7.648613] spidev spi1.1: Deleting spi1.1 5309 [ 7.649260] fbtft_device: GPIOS used by 'fb_st7735r': 5310 [ 7.649268] fbtft_device: 'reset' = GPIO73 5311 [ 7.649272] fbtft_device: 'dc' = GPIO70 5312 [ 7.649284] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 5313 [ 7.649290] spi spi1.1: fb_st7735r spi1.1 16000kHz 8 bits mode=0x00 5314 [ 7.687336] WCN: marlin_init entry! 5315 [ 7.688479] WCN: marlin_parse_dt reset gpio=211 5316 [ 7.688490] WCN_ERR: gpio reset request err: 211 5317 [ 7.688496] WCN: wcn config bt wake host 5318 [ 7.689006] WCN: marlin_registsr_bt_wake bt_hostwake gpio=208 mul-sel=6 pull=-1 drv_level=-1 data=0 intnum=193 5319 [ 7.689225] WCN: wcn config wifi wake host 5320 [ 7.689248] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 5321 [ 7.692552] sdiohal:sdiohal_init ok 5322 [ 7.693427] WCN: marlin_probe ok! 5323 [ 7.702198] mtty_probe init device addr: 0xffffffc03b74c000 5324 [ 7.702415] -->rfkill_bluetooth_init 5325 [ 7.702606] <--rfkill_bluetooth_init 5326 [ 7.745836] WCN: start_marlin [MARLIN_WIFI] 5327 [ 7.745849] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 5328 [ 7.745853] WCN: the first power on start 5329 [ 7.766598] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... 5330 [ 7.767360] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 5331 [ 7.773105] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... 5332 [ 7.773959] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 5333 [ 7.780312] systemd[1]: Starting systemd-sysusers.service - Create System Users... 5334 [ 7.788980] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. 5335 [ 7.801249] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. 5336 [ 7.803813] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. 5337 [ 7.859166] systemd[1]: Finished systemd-sysusers.service - Create System Users. 5338 [ 7.860302] WCN: marlin chip en pull up 5339 [ 7.865715] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... 5340 [ 7.886985] sdiohal:sdiohal_scan_card 5341 [ 7.887008] sunxi-wlan soc@03000000:wlan: bus_index: 1 5342 [ 7.887335] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 5343 [ 7.903713] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5344 [ 7.921174] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 5345 [ 7.922022] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 5346 [ 7.922042] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5347 [ 7.924568] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5348 [ 7.927805] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5349 [ 7.943663] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 5350 [ 7.954915] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B 5351 [ 7.955678] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 5352 [ 7.955761] sunxi-mmc sdc1: sdc set ios:clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 5353 [ 7.956446] mmc1: new ultra high speed SDR104 SDIO card at address 8800 5354 [ 7.957308] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=150000000 5355 [ 7.957495] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 5356 [ 7.957518] WCN: marlin_scan_finish! 5357 [ 7.957522] sdiohal:probe ok 5358 [ 7.957533] sdiohal:scan end! 5359 [ 7.957539] WCN: then marlin start to download 5360 [ 7.957569] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! 5361 [ 7.970097] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. 5362 [ 7.972015] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. 5363 [ 7.977767] systemd[1]: Mounting tmp.mount - /tmp... 5364 [ 7.984217] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... 5365 [ 8.000771] systemd[1]: Mounted tmp.mount - /tmp. 5366 [ 8.003318] systemd[1]: Reached target local-fs.target - Local File Systems. 5367 [ 8.008578] systemd[1]: Starting armbian-led-state.service - Armbian leds state... 5368 [ 8.013818] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config... 5369 [ 8.019504] systemd[1]: Starting console-setup.service - Set console font and keymap... 5370 [ 8.024942] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data... 5371 [ 8.040209] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 5372 [ 8.047139] systemd[1]: Starting ufw.service - Uncomplicated firewall... 5373 [ 8.051022] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices. 5374 [ 8.084374] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown... 5375 [ 8.092187] systemd[1]: Starting systemd-udev-settle.service - Wait for udev To Complete Device Initialization... 5376 [ 8.100670] systemd[1]: Finished console-setup.service - Set console font and keymap. 5377 [ 8.103043] systemd[1]: Received SIGRTMIN+20 from PID 1420 (plymouthd). 5378 [ 8.147246] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data. 5379 [ 8.153190] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 5380 [ 8.154607] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 5381 [ 8.155638] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 5382 [ 8.160081] systemd[1]: Finished ufw.service - Uncomplicated firewall. 5383 [ 8.177515] systemd[1]: Finished ifupdown-pre.service - Helper to synchronize boot up for ifupdown. 5384 [ 8.180109] systemd[1]: Reached target network-pre.target - Preparation for Network. 5385 [ 8.210840] systemd[1]: Finished armbian-led-state.service - Armbian leds state. 5386 [ 8.451940] zram: Added device: zram0 5387 [ 8.452691] zram: Added device: zram1 5388 [ 8.453473] zram: Added device: zram2 5389 [ 8.485148] zswap: can't enable, initialization failed 5390 [ 8.531886] zram0: detected capacity change from 0 to 506396672 5391 [ 8.533302] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files. 5392 [ 8.547536] systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen... 5393 [ 8.609483] fb_st7735r: module is from the staging directory, the quality is unknown, you have been warned. 5394 [ 8.615789] systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen. 5395 [ 8.618153] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 5396 [ 8.618996] systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch. 5397 [ 8.619587] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. 5398 [ 8.987033] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! 5399 [ 9.661041] graphics fb1: fb_st7735r frame buffer, 160x128, 40 KiB video memory, 4 KiB buffer memory, fps=20, spi1.1 at 16 MHz 5400 [ 9.697069] systemd[1]: Found device dev-ttyS0.device - /dev/ttyS0. 5401 [ 9.909975] systemd[1]: Reached target usb-gadget.target - Hardware activated USB gadget. 5402 [ 10.000388] WCN: marlin_request_firmware from (null)wcnmodem.bin start! 5403 [ 10.482601] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 5404 [ 10.482810] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 5405 [ 10.483353] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 5406 [ 10.496267] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 5407 [ 10.507236] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 5408 [ 10.515133] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 5409 [ 10.523273] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 5410 [ 10.532717] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 5411 [ 10.533541] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 5412 [ 10.540494] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 5413 [ 10.541319] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 5414 [ 10.544077] systemd[1]: modprobe@loop.service: Deactivated successfully. 5415 [ 10.547054] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 5416 [ 10.549615] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 5417 [ 10.549951] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 5418 [ 10.610953] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 5419 [ 10.612020] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 5420 [ 10.619382] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 5421 [ 10.631739] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch. 5422 [ 10.676370] systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status... 5423 [ 10.723858] sunxi-bt soc@03000000:bt: block state already is 1 5424 [ 10.729174] bluetooth_set_power: start_block=1 5425 [ 10.866278] systemd[1]: Finished systemd-udev-settle.service - Wait for udev To Complete Device Initialization. 5426 [ 10.872162] systemd[1]: Starting brltty.service - Braille Device Support... 5427 [ 11.013680] WCN: marlin_request_firmware from (null)wcnmodem.bin start! 5428 [ 11.574902] Adding 494524k swap on /dev/zram0. Priority:5 extents:1 across:494524k SSFS 5429 [ 11.595538] systemd[1]: Started brltty.service - Braille Device Support. 5430 [ 11.611377] input: BRLTTY 6.5 Linux Screen Driver Keyboard as /devices/virtual/input/input6 5431 [ 11.742636] zram1: detected capacity change from 0 to 52428800 5432 [ 12.026952] WCN_ERR: btwifi_download_firmware request firmware error 5433 [ 15.819983] systemd[1]: Finished armbian-zram-config.service - Armbian ZRAM config. 5434 [ 15.826001] systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging... 5435 [ 15.888604] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard 5436 [ 19.668573] systemd[1]: Finished armbian-ramlog.service - Armbian memory supported logging. 5437 [ 19.674901] systemd[1]: Starting systemd-journald.service - Journal Service... 5438 [ 19.948113] systemd-journald[1838]: Data hash table of /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal has a fill level at 75.1 (1656 of 2204 items, 1269760 file size, 766 bytes per hash table item), suggesting rotation. 5439 [ 19.948134] systemd-journald[1838]: /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal: Journal header limits reached or header out-of-date, rotating. 5440 [ 19.951727] systemd[1]: Started systemd-journald.service - Journal Service. 5441 [ 19.998127] systemd-journald[1838]: Received client request to flush runtime journal. 5442 [ 20.253092] IPVS: Creating netns size=1928 id=1 5443 [ 21.264355] random: crng init done 5444 [ 21.264368] random: 7 urandom warning(s) missed due to ratelimiting 5445 [ 38.880315] WCN_ERR: marlin download timeout 5446 [ 38.880327] sdiohal:sdiohal_runtime_put entry 5447 [ 38.880443] sdiohal:sdiohal_runtime_put wait xmit_cnt end 5448 [ 38.880492] WCN: marlin power state:0, subsys: [MARLIN_BLUETOOTH] power 0 5449 [ 38.880500] bluetooth_set_power: end_block=1 5450 [ 38.891587] sdiohal err:sdiohal_adma_pt_write xmit_cnt:0 xmit_start:0,not have card 5451 [ 38.891609] sdiohal err:sdiohal_aon_writeb xmit_cnt:0 xmit_start:0,not have card 5452 [ 38.891613] sdiohal err:sdiohal_aon_writeb xmit_cnt:0 xmit_start:0,not have card 5453 [ 42.086720] unisoc_wifi: probe of unisoc_wifi failed with error -1 5454 5455 ### armbian-release: 5456 5457 # PLEASE DO NOT EDIT THIS FILE 5458 BOARD=orangepizero2 5459 BOARD_NAME="Orange Pi Zero2" 5460 BOARDFAMILY=sun50iw9 5461 BUILD_REPOSITORY_URL=https://github.com/armbian/build 5462 BUILD_REPOSITORY_COMMIT=ac829eb6 5463 LINUXFAMILY=sun50iw9 5464 ARCH=arm64 5465 IMAGE_TYPE=stable 5466 BOARD_TYPE=conf 5467 INITRD_ARCH=arm 5468 KERNEL_IMAGE_TYPE=Image 5469 FORCE_BOOTSCRIPT_UPDATE=yes 5470 VENDOR=Armbian 5471 BOOTSCRIPT_FORCE_UPDATE="yes" 5472 BOOTSCRIPT_DST="boot.cmd" 5473 VERSION=23.8.1 5474 REVISION=23.8.1 5475 BRANCH=legacy 5476 5477 ### boot environment: 5478 5479 verbosity=1 5480 console=serial 5481 #disp_mode=1080p60 5482 #fb0_width=1280 5483 #fb0_height=720 5484 rootdev=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e 5485 rootfstype=ext4 5486 overlays=spi-spidev 5487 param_spidev_spi_bus=1 5488 param_spidev_spi_cs=1 5489 extraargs=fbcon=map:1 5490 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u 5491 5492 ### lsusb: 5493 5494 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 5495 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 5496 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 5497 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 5498 Bus 004 Device 002: ID 24ae:2013 Shenzhen Rapoo Technology Co., Ltd. Rapoo 2.4G Wireless Device 5499 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 5500 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 5501 5502 ### lscpu: 5503 5504 Architecture: aarch64 5505 CPU op-mode(s): 32-bit, 64-bit 5506 Byte Order: Little Endian 5507 CPU(s): 4 5508 On-line CPU(s) list: 0-3 5509 Vendor ID: ARM 5510 Model name: Cortex-A53 5511 Model: 4 5512 Thread(s) per core: 1 5513 Core(s) per cluster: 4 5514 Socket(s): - 5515 Cluster(s): 1 5516 Stepping: r0p4 5517 CPU(s) scaling MHz: 100% 5518 CPU max MHz: 1512.0000 5519 CPU min MHz: 480.0000 5520 BogoMIPS: 48.00 5521 Flags: fp asimd aes pmull sha1 sha2 crc32 5522 5523 ### cpuinfo: 5524 5525 processor : 0 5526 BogoMIPS : 48.00 5527 Features : fp asimd aes pmull sha1 sha2 crc32 5528 CPU implementer : 0x41 5529 CPU architecture: 8 5530 CPU variant : 0x0 5531 CPU part : 0xd03 5532 CPU revision : 4 5533 5534 processor : 1 5535 BogoMIPS : 48.00 5536 Features : fp asimd aes pmull sha1 sha2 crc32 5537 CPU implementer : 0x41 5538 CPU architecture: 8 5539 CPU variant : 0x0 5540 CPU part : 0xd03 5541 CPU revision : 4 5542 5543 processor : 2 5544 BogoMIPS : 48.00 5545 Features : fp asimd aes pmull sha1 sha2 crc32 5546 CPU implementer : 0x41 5547 CPU architecture: 8 5548 CPU variant : 0x0 5549 CPU part : 0xd03 5550 CPU revision : 4 5551 5552 processor : 3 5553 BogoMIPS : 48.00 5554 Features : fp asimd aes pmull sha1 sha2 crc32 5555 CPU implementer : 0x41 5556 CPU architecture: 8 5557 CPU variant : 0x0 5558 CPU part : 0xd03 5559 CPU revision : 4 5560 5561 5562 ### meminfo: 5563 5564 MemTotal: 989056 kB 5565 MemFree: 798740 kB 5566 MemAvailable: 887012 kB 5567 Buffers: 15096 kB 5568 Cached: 80252 kB 5569 SwapCached: 0 kB 5570 Active: 67012 kB 5571 Inactive: 51664 kB 5572 Active(anon): 23516 kB 5573 Inactive(anon): 652 kB 5574 Active(file): 43496 kB 5575 Inactive(file): 51012 kB 5576 Unevictable: 0 kB 5577 Mlocked: 0 kB 5578 SwapTotal: 494524 kB 5579 SwapFree: 494524 kB 5580 Dirty: 692 kB 5581 Writeback: 0 kB 5582 AnonPages: 23400 kB 5583 Mapped: 23472 kB 5584 Shmem: 828 kB 5585 Slab: 27944 kB 5586 SReclaimable: 9176 kB 5587 SUnreclaim: 18768 kB 5588 KernelStack: 2480 kB 5589 PageTables: 1148 kB 5590 NFS_Unstable: 0 kB 5591 Bounce: 0 kB 5592 WritebackTmp: 0 kB 5593 CommitLimit: 989052 kB 5594 Committed_AS: 83468 kB 5595 VmallocTotal: 263061440 kB 5596 VmallocUsed: 0 kB 5597 VmallocChunk: 0 kB 5598 CmaTotal: 16384 kB 5599 CmaFree: 7468 kB 5600 HugePages_Total: 0 5601 HugePages_Free: 0 5602 HugePages_Rsvd: 0 5603 HugePages_Surp: 0 5604 Hugepagesize: 2048 kB 5605 5606 ### virtual memory: 5607 5608 vm.admin_reserve_kbytes = 8192 5609 vm.block_dump = 0 5610 vm.compact_unevictable_allowed = 1 5611 vm.dirty_background_bytes = 0 5612 vm.dirty_background_ratio = 10 5613 vm.dirty_bytes = 0 5614 vm.dirty_expire_centisecs = 3000 5615 vm.dirty_ratio = 20 5616 vm.dirtytime_expire_seconds = 43200 5617 vm.dirty_writeback_centisecs = 500 5618 vm.extfrag_threshold = 500 5619 vm.extra_free_kbytes = 0 5620 vm.hugepages_treat_as_movable = 0 5621 vm.hugetlb_shm_group = 0 5622 vm.laptop_mode = 0 5623 vm.legacy_va_layout = 0 5624 vm.lowmem_reserve_ratio = 256 32 5625 vm.max_map_count = 65530 5626 vm.min_free_kbytes = 3937 5627 vm.mmap_min_addr = 4096 5628 vm.mmap_rnd_bits = 18 5629 vm.mmap_rnd_compat_bits = 11 5630 vm.nr_hugepages = 0 5631 vm.nr_overcommit_hugepages = 0 5632 vm.nr_pdflush_threads = 0 5633 vm.oom_dump_tasks = 1 5634 vm.oom_kill_allocating_task = 0 5635 vm.overcommit_kbytes = 0 5636 vm.overcommit_memory = 0 5637 vm.overcommit_ratio = 50 5638 vm.page-cluster = 0 5639 vm.panic_on_oom = 0 5640 vm.percpu_pagelist_fraction = 0 5641 vm.stat_interval = 1 5642 vm.swappiness = 100 5643 vm.user_reserve_kbytes = 30000 5644 vm.vfs_cache_pressure = 100 5645 vm.watermark_scale_factor = 10 5646 5647 ### ip addr: 5648 5649 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 5650 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 5651 inet XXX.XXX.0.1/8 scope host lo 5652 valid_lft forever preferred_lft forever 5653 inet6 ::1/128 scope host noprefixroute 5654 valid_lft forever preferred_lft forever 5655 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 5656 link/ether a2:f9:75:52:ad:58 brd ff:ff:ff:ff:ff:ff 5657 3: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 5658 link/ether fa:6e:f4:da:68:8c brd ff:ff:ff:ff:ff:ff 5659 4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 5660 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 5661 5: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN group default qlen 1 5662 link/gre XXX.XXX.0.0 brd XXX.XXX.0.0 5663 6: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN group default qlen 1000 5664 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 5665 7: ip_vti0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 5666 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 5667 8: ip6_vti0@NONE: <NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1 5668 link/tunnel6 :: brd :: 5669 9: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 5670 link/sit XXX.XXX.0.0 brd XXX.XXX.0.0 5671 10: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN group default qlen 1 5672 link/tunnel6 :: brd :: 5673 5674 ### partitions: 5675 5676 major minor #blocks name 5677 5678 179 0 62410752 mmcblk0 5679 179 1 61763584 mmcblk0p1 5680 253 0 494528 zram0 5681 253 1 51200 zram1 5682 5683 ### df: 5684 5685 udev 466M 0 466M 0% /dev 5686 tmpfs 97M 868K 96M 1% /run 5687 /dev/mmcblk0p1 58G 6.4G 51G 12% / 5688 tmpfs 483M 0 483M 0% /dev/shm 5689 tmpfs 5.0M 0 5.0M 0% /run/lock 5690 tmpfs 483M 4.0K 483M 1% /tmp 5691 /dev/zram1 47M 7.9M 36M 19% /var/log 5692 5693 ### lsblk: 5694 5695 NAME FSTYPE SIZE MOUNTPOINT UUID 5696 mmcblk0 59.5G 5697 └─mmcblk0p1 ext4 58.9G / 0c85f38a-a16e-49a0-a53c-99d9856e983e 5698 zram1 50M /var/log 5699 zram2 0B 5700 5701 ### zramctl: 5702 5703 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT 5704 /dev/zram1 lz4 50M 7.7M 2.1M 2.5M 4 /var/log 5705 /dev/zram0 lzo 482.9M 4K 76B 12K 4 [SWAP] 5706 5707 ### mtab: 5708 5709 /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 5710 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 5711 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 5712 5713 ### mmc0:0001 info: 5714 5715 manfid: 0x0000fe 5716 cid: fe3432534431364720000000690091f5 5717 fwrev: 0x0 5718 csd: 400e00325b590001dc277f800a40008b 5719 ocr: 0x00200000 5720 type: SD 5721 date: 01/2009 5722 hwrev: 0x2 5723 dsr: 0x404 5724 serial: 0x00000069 5725 erase_size: 512 5726 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SD16G MODALIAS=mmc:block 5727 ssr: 000000000800000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 5728 scr: 0285808300000000 5729 oemid: 0x3432 5730 preferred_erase_size: 4194304 5731 name: SD16G 5732 5733 ### Boot system health: 5734 5735 Time CPU load %cpu %sys %usr %nice %io %irq Tcpu C.St. 5736 14:27:49 1512 MHz 1.56 19% 9% 6% 0% 3% 0% 47.8 °C 0/5 5737 14:27:50 1512 MHz 1.56 89% 17% 17% 1% 53% 0% 47.2 °C 0/5 5738 14:27:50 1512 MHz 2.56 98% 34% 50% 1% 12% 0% 47.2 °C 0/5 5739 14:27:51 1512 MHz 2.56 100% 34% 61% 0% 3% 0% 49.4 °C 0/5 5740 14:27:51 1512 MHz 2.56 100% 39% 51% 1% 7% 0% 49.4 °C 0/5 5741 5742 ### Activated 1 lzo zram swap devices with 482MB each. 5743 ### Activated Armbian ramlog partition with lz4 compression 5744 5745 Mon Sep 25 02:38:27 PM -03 2023 | Orange Pi Zero2 | 23.8.1 | arm64 | aarch64 | 4.9.318-legacy-sun50iw9 5746 5747 ### dmesg: 5748 5749 [ 0.000000] Booting Linux on physical CPU 0x0 5750 [ 0.000000] Linux version 4.9.318-legacy-sun50iw9 (armbian@next) (gcc version 11.4.0 (Ubuntu 11.4.0-1ubuntu1~22.04) ) #1 SMP PREEMPT Tue May 17 02:06:13 UTC 2022 5751 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] 5752 [ 0.000000] disp reserve base 0x7bf4fcc0 ,size 0x384000 5753 [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 5754 [ 0.000000] On node 0 totalpages: 262144 5755 [ 0.000000] DMA zone: 4096 pages used for memmap 5756 [ 0.000000] DMA zone: 0 pages reserved 5757 [ 0.000000] DMA zone: 262144 pages, LIFO batch:31 5758 [ 0.000000] psci: probing for conduit method from DT. 5759 [ 0.000000] psci: PSCIv1.0 detected in firmware. 5760 [ 0.000000] psci: Using standard PSCI v0.2 function IDs 5761 [ 0.000000] psci: Trusted OS migration not required 5762 [ 0.000000] psci: SMC Calling Convention v1.0 5763 [ 0.000000] percpu: Embedded 21 pages/cpu s45592 r8192 d32232 u86016 5764 [ 0.000000] pcpu-alloc: s45592 r8192 d32232 u86016 alloc=21*4096 5765 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 5766 [ 0.000000] Detected VIPT I-cache on CPU0 5767 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 5768 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258048 5769 [ 0.000000] Kernel command line: root=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e rootwait rootfstype=ext4 splash=verbose console=ttyS0,115200 consoleblank=0 loglevel=1 ubootpart=68ea14b7-01 disp_reserve=3686400,0x7bf4fcc0 fbcon=map:1 5770 [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes 5771 [ 0.000000] log_buf_len total cpu_extra contributions: 393216 bytes 5772 [ 0.000000] log_buf_len min size: 131072 bytes 5773 [ 0.000000] log_buf_len: 524288 bytes 5774 [ 0.000000] early log buf free: 129352(98%) 5775 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) 5776 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) 5777 [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) 5778 [ 0.000000] Memory: 952408K/1048576K available (11902K kernel code, 1476K rwdata, 6668K rodata, 3008K init, 674K bss, 79784K reserved, 16384K cma-reserved) 5779 [ 0.000000] Virtual kernel memory layout: 5780 [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) 5781 [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) 5782 [ 0.000000] .text : 0xffffff8008208000 - 0xffffff8008da8000 ( 11904 KB) 5783 [ 0.000000] .rodata : 0xffffff8008da8000 - 0xffffff8009438000 ( 6720 KB) 5784 [ 0.000000] .init : 0xffffff8009438000 - 0xffffff8009728000 ( 3008 KB) 5785 [ 0.000000] .data : 0xffffff8009728000 - 0xffffff8009899008 ( 1477 KB) 5786 [ 0.000000] .bss : 0xffffff8009899008 - 0xffffff8009941b94 ( 675 KB) 5787 [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) 5788 [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) 5789 [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) 5790 [ 0.000000] 0xffffffbf00000000 - 0xffffffbf01000000 ( 16 MB actual) 5791 [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB) 5792 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 5793 [ 0.000000] Preemptible hierarchical RCU implementation. 5794 [ 0.000000] Build-time adjustment of leaf fanout to 64. 5795 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 5796 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns 5797 [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt). 5798 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 5799 [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 5800 [ 0.000238] Console: colour dummy device 80x25 5801 [ 0.000253] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) 5802 [ 0.000262] pid_max: default: 32768 minimum: 301 5803 [ 0.000458] Security Framework initialized 5804 [ 0.000467] AppArmor: AppArmor disabled by boot time parameter 5805 [ 0.000582] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) 5806 [ 0.000588] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) 5807 [ 0.001861] sched-energy: CPU device node has no sched-energy-costs 5808 [ 0.001876] Invalid sched_group_energy for CPU0 5809 [ 0.001883] CPU0: update cpu_capacity 1024 5810 [ 0.008972] ASID allocator initialised with 32768 entries 5811 [ 0.027956] BOOTEVENT: 27.942499: ON 5812 [ 0.055924] Detected VIPT I-cache on CPU1 5813 [ 0.055978] Invalid sched_group_energy for CPU1 5814 [ 0.055982] CPU1: update cpu_capacity 1024 5815 [ 0.055985] CPU1: Booted secondary processor [410fd034] 5816 [ 0.079315] Detected VIPT I-cache on CPU2 5817 [ 0.079353] Invalid sched_group_energy for CPU2 5818 [ 0.079357] CPU2: update cpu_capacity 1024 5819 [ 0.079360] CPU2: Booted secondary processor [410fd034] 5820 [ 0.102713] Detected VIPT I-cache on CPU3 5821 [ 0.102747] Invalid sched_group_energy for CPU3 5822 [ 0.102750] CPU3: update cpu_capacity 1024 5823 [ 0.102753] CPU3: Booted secondary processor [410fd034] 5824 [ 0.102832] Brought up 4 CPUs 5825 [ 0.102840] SMP: Total of 4 processors activated. 5826 [ 0.102848] CPU features: detected feature: 32-bit EL0 Support 5827 [ 0.102854] CPU features: detected feature: Kernel page table isolation (KPTI) 5828 [ 0.106614] CPU: All CPU(s) started at EL1 5829 [ 0.106637] alternatives: patching kernel code 5830 [ 0.106815] Invalid sched_group_energy for CPU3 5831 [ 0.106824] CPU3: update max cpu_capacity 1024 5832 [ 0.106830] Invalid sched_group_energy for Cluster3 5833 [ 0.106835] Invalid sched_group_energy for CPU2 5834 [ 0.106840] Invalid sched_group_energy for Cluster2 5835 [ 0.106845] Invalid sched_group_energy for CPU1 5836 [ 0.106851] Invalid sched_group_energy for Cluster1 5837 [ 0.106855] Invalid sched_group_energy for CPU0 5838 [ 0.106861] Invalid sched_group_energy for Cluster0 5839 [ 0.108293] devtmpfs: initialized 5840 [ 0.112726] CPU1: update max cpu_capacity 1024 5841 [ 0.143431] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns 5842 [ 0.143451] futex hash table entries: 1024 (order: 5, 131072 bytes) 5843 [ 0.144111] xor: measuring software checksum speed 5844 [ 0.176260] 8regs : 1933.200 MB/sec 5845 [ 0.209639] 8regs_prefetch: 1720.800 MB/sec 5846 [ 0.243027] 32regs : 2287.200 MB/sec 5847 [ 0.276414] 32regs_prefetch: 1935.600 MB/sec 5848 [ 0.276419] xor: using function: 32regs (2287.200 MB/sec) 5849 [ 0.276479] atomic64_test: passed 5850 [ 0.276485] pinctrl core: initialized pinctrl subsystem 5851 [ 0.277657] NET: Registered protocol family 16 5852 [ 0.278906] dump_class_init,861, success 5853 [ 0.296479] cpuidle: using governor menu 5854 [ 0.297894] sunxi iommu: irq = 8 5855 [ 0.298211] vdso: 2 pages (1 code @ ffffff8008daf000, 1 data @ ffffff800972c000) 5856 [ 0.298229] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. 5857 [ 0.299634] DMA: preallocated 256 KiB pool for atomic allocations 5858 [ 0.301012] sun50iw9p1-r-pinctrl r_pio: initialized sunXi PIO driver 5859 [ 0.315393] sun50iw9p1-pinctrl pio: initialized sunXi PIO driver 5860 [ 0.319314] iommu: Adding device 1c0e000.ve to group 0 5861 [ 0.319820] iommu: Adding device 1c00000.vp9 to group 0 5862 [ 0.331245] iommu: Adding device 1000000.disp to group 0 5863 [ 0.332650] iommu: Adding device 1480000.g2d to group 0 5864 [ 0.335865] iommu: Adding device csi0 to group 0 5865 [ 0.336319] iommu: Adding device csi1 to group 0 5866 [ 0.337515] iommu: Adding device 6600800.vind:scaler@0 to group 0 5867 [ 0.337814] iommu: Adding device 6600800.vind:scaler@1 to group 0 5868 [ 0.338113] iommu: Adding device 6600800.vind:scaler@2 to group 0 5869 [ 0.338403] iommu: Adding device 6600800.vind:scaler@3 to group 0 5870 [ 0.338693] iommu: Adding device 6600800.vind:scaler@4 to group 0 5871 [ 0.338987] iommu: Adding device 6600800.vind:scaler@5 to group 0 5872 [ 0.339927] iommu: Adding device vinc0 to group 0 5873 [ 0.340536] iommu: Adding device vinc1 to group 0 5874 [ 0.341999] iommu: Adding device 1420000.deinterlace to group 0 5875 [ 0.387969] HugeTLB registered 2 MB page size, pre-allocated 0 pages 5876 [ 0.444207] raid6: int64x1 gen() 393 MB/s 5877 [ 0.500872] raid6: int64x1 xor() 365 MB/s 5878 [ 0.557597] raid6: int64x2 gen() 590 MB/s 5879 [ 0.614378] raid6: int64x2 xor() 512 MB/s 5880 [ 0.671168] raid6: int64x4 gen() 840 MB/s 5881 [ 0.727954] raid6: int64x4 xor() 629 MB/s 5882 [ 0.784771] raid6: int64x8 gen() 965 MB/s 5883 [ 0.841502] raid6: int64x8 xor() 655 MB/s 5884 [ 0.898290] raid6: neonx1 gen() 648 MB/s 5885 [ 0.955061] raid6: neonx1 xor() 641 MB/s 5886 [ 1.011844] raid6: neonx2 gen() 976 MB/s 5887 [ 1.068646] raid6: neonx2 xor() 820 MB/s 5888 [ 1.125400] raid6: neonx4 gen() 1287 MB/s 5889 [ 1.182198] raid6: neonx4 xor() 966 MB/s 5890 [ 1.238981] raid6: neonx8 gen() 1324 MB/s 5891 [ 1.295733] raid6: neonx8 xor() 991 MB/s 5892 [ 1.295738] raid6: using algorithm neonx8 gen() 1324 MB/s 5893 [ 1.295743] raid6: .... xor() 991 MB/s, rmw enabled 5894 [ 1.295749] raid6: using intx1 recovery algorithm 5895 [ 1.295881] pwm module init! 5896 [ 1.300143] sunxi-pm debug v3.10 5897 [ 1.301215] SCSI subsystem initialized 5898 [ 1.301842] sunxi_spi_probe()2299 - [spi0] SPI MASTER MODE 5899 [ 1.301924] sunxi_spi_request_gpio()1927 - [spi0] Pinctrl init spi0 5900 [ 1.302044] sunxi_spi_clk_init()1977 - [spi0] mclk 100000000 5901 [ 1.302561] spi spi0: master is unqueued, this is deprecated 5902 [ 1.302868] sunxi_spi_probe()2379 - [spi0]: driver probe succeed, base ffffff8008066000, irq 294 5903 [ 1.303441] sunxi_spi_probe()2299 - [spi1] SPI MASTER MODE 5904 [ 1.303519] sunxi_spi_request_gpio()1927 - [spi1] Pinctrl init spi1 5905 [ 1.303635] sunxi_spi_clk_init()1977 - [spi1] mclk 100000000 5906 [ 1.304098] spi spi1: master is unqueued, this is deprecated 5907 [ 1.304403] sunxi_spi_probe()2379 - [spi1]: driver probe succeed, base ffffff8008068000, irq 295 5908 [ 1.305208] usbcore: registered new interface driver usbfs 5909 [ 1.305292] usbcore: registered new interface driver hub 5910 [ 1.305365] usbcore: registered new device driver usb 5911 [ 1.305526] sunxi_i2c_adap_init()2522 - init 5912 [ 1.306099] sunxi_i2c_probe()2208 - [i2c3] warning: failed to get regulator id 5913 [ 1.306194] sunxi_i2c_probe()2270 - [i2c3] twi_drv_used = 0 5914 [ 1.306202] sunxi_i2c_probe()2274 - [i2c3] twi_pkt_interval = 0 5915 [ 1.306217] twi3 supply twi not found, using dummy regulator 5916 [ 1.306291] twi_request_gpio()451 - [i2c3] init name: twi3 5917 [ 1.307063] sunxi_i2c_probe()2208 - [i2c5] warning: failed to get regulator id 5918 [ 1.307144] sunxi_i2c_probe()2270 - [i2c5] twi_drv_used = 0 5919 [ 1.307151] sunxi_i2c_probe()2274 - [i2c5] twi_pkt_interval = 0 5920 [ 1.307165] twi5 supply twi not found, using dummy regulator 5921 [ 1.307238] twi_request_gpio()451 - [i2c5] init name: twi5 5922 [ 1.307723] axp20x-i2c 5-0036: AXP20x variant AXP806 found 5923 [ 1.326445] random: fast init done 5924 [ 1.337599] axp20x-i2c 5-0036: AXP20X driver loaded 5925 [ 1.338134] media: Linux media interface: v0.10 5926 [ 1.338214] Linux video capture interface: v2.00 5927 [ 1.338950] Advanced Linux Sound Architecture Driver Initialized. 5928 [ 1.339676] Bluetooth: Core ver 2.22 5929 [ 1.339753] NET: Registered protocol family 31 5930 [ 1.339759] Bluetooth: HCI device and connection manager initialized 5931 [ 1.339775] Bluetooth: HCI socket layer initialized 5932 [ 1.339788] Bluetooth: L2CAP socket layer initialized 5933 [ 1.339825] Bluetooth: SCO socket layer initialized 5934 [ 1.340637] [DISP]disp_module_init 5935 [ 1.341879] [DISP] parser_disp_init_para,line:1403: 5936 [ 1.341888] of_property_read fb0_width fail 5937 [ 1.341898] [DISP] disp_init,line:2215: 5938 [ 1.341904] smooth display screen:0 type:4 mode:10 5939 [ 1.359383] [DISP]disp_module_init finish 5940 [ 1.360268] clocksource: Switched to clocksource arch_sys_counter 5941 [ 1.360527] VFS: Disk quotas dquot_6.6.0 5942 [ 1.360615] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 5943 [ 1.361355] Console: switching to colour frame buffer device 240x67 5944 [ 1.404965] NET: Registered protocol family 2 5945 [ 1.405091] IP idents hash table entries: 16384 (order: 5, 131072 bytes) 5946 [ 1.420527] TCP established hash table entries: 8192 (order: 4, 65536 bytes) 5947 [ 1.420600] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) 5948 [ 1.420724] TCP: Hash tables configured (established 8192 bind 8192) 5949 [ 1.420812] UDP hash table entries: 512 (order: 2, 16384 bytes) 5950 [ 1.420841] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) 5951 [ 1.421169] NET: Registered protocol family 1 5952 [ 1.421788] RPC: Registered named UNIX socket transport module. 5953 [ 1.421793] RPC: Registered udp transport module. 5954 [ 1.421796] RPC: Registered tcp transport module. 5955 [ 1.421799] RPC: Registered tcp NFSv4.1 backchannel transport module. 5956 [ 1.422067] Trying to unpack rootfs image as initramfs... 5957 [ 2.176429] Freeing initrd memory: 17256K 5958 [ 2.177558] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available 5959 [ 2.181455] audit: initializing netlink subsys (disabled) 5960 [ 2.181510] audit: type=2000 audit(2.176:1): initialized 5961 [ 2.182415] workingset: timestamp_bits=45 max_order=18 bucket_order=0 5962 [ 2.193668] DLM installed 5963 [ 2.195511] squashfs: version 4.0 (2009/01/31) Phillip Lougher 5964 [ 2.195852] Registering sdcardfs 0.1 5965 [ 2.196316] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 5966 [ 2.197871] ntfs: driver 2.1.32 [Flags: R/W]. 5967 [ 2.204515] NET: Registered protocol family 38 5968 [ 2.204881] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) 5969 [ 2.205015] io scheduler noop registered 5970 [ 2.205022] io scheduler deadline registered 5971 [ 2.205184] io scheduler cfq registered (default) 5972 [ 2.207233] failed to get easy_light_used assign 5973 [ 2.207243] failed to get normal led pin assign 5974 [ 2.207249] failed to get standby led pin assign 5975 [ 2.207254] failed to get standby led pin assign 5976 [ 2.207259] these is zero number for gpio 5977 [ 2.207264] gpio_init finish with uesd 5978 [ 2.210400] uart uart0: get regulator failed 5979 [ 2.210603] uart0: ttyS0 at MMIO 0x5000000 (irq = 280, base_baud = 1500000) is a SUNXI 5980 [ 2.210625] sw_console_setup()1706 - console setup baud 115200 parity n bits 8, flow n 5981 [ 2.210711] console [ttyS0] enabled 5982 [ 2.211510] uart uart1: get regulator failed 5983 [ 2.211708] uart1: ttyS1 at MMIO 0x5000400 (irq = 281, base_baud = 1500000) is a SUNXI 5984 [ 2.212410] uart uart5: get regulator failed 5985 [ 2.212594] uart5: ttyS5 at MMIO 0x5001400 (irq = 282, base_baud = 1500000) is a SUNXI 5986 [ 2.213915] misc dump reg init 5987 [ 2.215056] deinterlace 1420000.deinterlace: version[1.0.0], ip=0x300100 5988 [ 2.215392] Unable to detect cache hierarchy for CPU 0 5989 [ 2.229485] brd: module loaded 5990 [ 2.237791] loop: module loaded 5991 [ 2.237983] [NAND][NE] Not found valid nand node on dts 5992 [ 2.238568] Get boot type cmd line fail 5993 [ 2.239150] sunxi-bt soc@03000000:bt: Missing bt_power. 5994 [ 2.239160] sunxi-bt soc@03000000:bt: bt_power_name ((null)) 5995 [ 2.239167] sunxi-bt soc@03000000:bt: Missing bt_io_regulator. 5996 [ 2.239174] sunxi-bt soc@03000000:bt: io_regulator_name ((null)) 5997 [ 2.239230] sunxi-bt soc@03000000:bt: bt_rst gpio=211 mul-sel=1 pull=-1 drv_level=-1 data=0 5998 [ 2.239301] sunxi-bt soc@03000000:bt: devm_pinctrl_get() failed! 5999 [ 2.240148] sunxi-wlan soc@03000000:wlan: wlan_busnum (1) 6000 [ 2.240159] sunxi-wlan soc@03000000:wlan: Missing wlan_power. 6001 [ 2.240166] sunxi-wlan soc@03000000:wlan: wlan_power_name ((null)) 6002 [ 2.240174] sunxi-wlan soc@03000000:wlan: Missing wlan_io_regulator. 6003 [ 2.240181] sunxi-wlan soc@03000000:wlan: io_regulator_name ((null)) 6004 [ 2.240211] sunxi-wlan soc@03000000:wlan: wlan_regon gpio=210 mul-sel=1 pull=-1 drv_level=-1 data=0 6005 [ 2.240245] sunxi-wlan soc@03000000:wlan: get gpio chip_en failed 6006 [ 2.240311] sunxi-wlan soc@03000000:wlan: get gpio power_en failed 6007 [ 2.240332] sunxi-wlan soc@03000000:wlan: wlan_hostwake gpio=207 mul-sel=6 pull=-1 drv_level=-1 data=0 6008 [ 2.241315] [ADDR_MGT] addr_mgt_probe: success. 6009 [ 2.247933] tun: Universal TUN/TAP device driver, 1.6 6010 [ 2.247945] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 6011 [ 2.249924] gmac-power0: NULL 6012 [ 2.249934] gmac-power1: NULL 6013 [ 2.249940] gmac-power2: NULL 6014 [ 2.250894] PPP generic driver version 2.4.2 6015 [ 2.251187] PPP BSD Compression module registered 6016 [ 2.251197] PPP Deflate Compression module registered 6017 [ 2.251225] PPP MPPE Compression module registered 6018 [ 2.251234] NET: Registered protocol family 24 6019 [ 2.251267] PPTP driver version 0.8.5 6020 [ 2.251630] usbcore: registered new interface driver r8152 6021 [ 2.251705] usbcore: registered new interface driver asix 6022 [ 2.251803] usbcore: registered new interface driver ax88179_178a 6023 [ 2.251872] usbcore: registered new interface driver cdc_ether 6024 [ 2.251932] usbcore: registered new interface driver net1080 6025 [ 2.252001] usbcore: registered new interface driver cdc_subset 6026 [ 2.252068] usbcore: registered new interface driver zaurus 6027 [ 2.252156] usbcore: registered new interface driver cdc_ncm 6028 [ 2.252163] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 6029 [ 2.252552] get drv_vbus is fail, 84 6030 [ 2.252561] get ehci0-controller, regulator_io is no nocare 6031 [ 2.252825] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffff800992ac30, 0x:ffffff80081c1000, irq_no:11e 6032 [ 2.252831] [sunxi-ehci0]: Not init ehci0 6033 [ 2.252946] get ehci1-controller, regulator_io is no nocare 6034 [ 2.253136] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xffffff800992a8e8, 0x:ffffff80081c5000, irq_no:120 6035 [ 2.253195] sunxi-ehci 5200000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 6036 [ 2.253222] sunxi-ehci 5200000.ehci1-controller: new USB bus registered, assigned bus number 1 6037 [ 2.253891] sunxi-ehci 5200000.ehci1-controller: irq 288, io mem 0xffffff80081c5000 6038 [ 2.270279] sunxi-ehci 5200000.ehci1-controller: USB 0.0 started, EHCI 1.00 6039 [ 2.270552] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 6040 [ 2.270560] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 6041 [ 2.270568] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 6042 [ 2.270575] usb usb1: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 6043 [ 2.270582] usb usb1: SerialNumber: sunxi-ehci 6044 [ 2.271442] hub 1-0:1.0: USB hub found 6045 [ 2.271486] hub 1-0:1.0: 1 port detected 6046 [ 2.272176] get drv_vbus is fail, 84 6047 [ 2.272184] get ehci2-controller, regulator_io is no nocare 6048 [ 2.272428] [sunxi-ehci2]: probe, pdev->name: 5310000.ehci2-controller, sunxi_ehci: 0xffffff800992a5a0, 0x:ffffff80081cf000, irq_no:122 6049 [ 2.272479] sunxi-ehci 5310000.ehci2-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 6050 [ 2.272503] sunxi-ehci 5310000.ehci2-controller: new USB bus registered, assigned bus number 2 6051 [ 2.272783] sunxi-ehci 5310000.ehci2-controller: irq 290, io mem 0xffffff80081cf000 6052 [ 2.283632] sunxi-ehci 5310000.ehci2-controller: USB 0.0 started, EHCI 1.00 6053 [ 2.283861] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 6054 [ 2.283870] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 6055 [ 2.283878] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 6056 [ 2.283885] usb usb2: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 6057 [ 2.283892] usb usb2: SerialNumber: sunxi-ehci 6058 [ 2.284749] hub 2-0:1.0: USB hub found 6059 [ 2.284793] hub 2-0:1.0: 1 port detected 6060 [ 2.285459] get drv_vbus is fail, 84 6061 [ 2.285466] get ehci3-controller, regulator_io is no nocare 6062 [ 2.285708] [sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffff800992a258, 0x:ffffff80081d9000, irq_no:124 6063 [ 2.285758] sunxi-ehci 5311000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 6064 [ 2.285783] sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 3 6065 [ 2.286072] sunxi-ehci 5311000.ehci3-controller: irq 292, io mem 0xffffff80081d9000 6066 [ 2.296944] sunxi-ehci 5311000.ehci3-controller: USB 0.0 started, EHCI 1.00 6067 [ 2.297151] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 6068 [ 2.297159] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 6069 [ 2.297167] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 6070 [ 2.297174] usb usb3: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 6071 [ 2.297181] usb usb3: SerialNumber: sunxi-ehci 6072 [ 2.298000] hub 3-0:1.0: USB hub found 6073 [ 2.298055] hub 3-0:1.0: 1 port detected 6074 [ 2.298981] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 6075 [ 2.299346] get drv_vbus is fail, 84 6076 [ 2.299354] get ohci0-controller, regulator_io is no nocare 6077 [ 2.299693] [sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffff800992b950 6078 [ 2.299700] [sunxi-ohci0]: Not init ohci0 6079 [ 2.299812] get ohci1-controller, regulator_io is no nocare 6080 [ 2.299981] hci: request ohci1-controller gpio:80 6081 [ 2.300057] [sunxi-ohci1]: probe, pdev->name: 5200000.ohci1-controller, sunxi_ohci: 0xffffff800992b608 6082 [ 2.300109] sunxi-ohci 5200000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 6083 [ 2.300135] sunxi-ohci 5200000.ohci1-controller: new USB bus registered, assigned bus number 4 6084 [ 2.300223] sunxi-ohci 5200000.ohci1-controller: irq 289, io mem 0x00000000 6085 [ 2.361139] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 6086 [ 2.361150] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 6087 [ 2.361158] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 6088 [ 2.361165] usb usb4: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 6089 [ 2.361172] usb usb4: SerialNumber: sunxi-ohci 6090 [ 2.362029] hub 4-0:1.0: USB hub found 6091 [ 2.362074] hub 4-0:1.0: 1 port detected 6092 [ 2.362745] get drv_vbus is fail, 84 6093 [ 2.362754] get ohci2-controller, regulator_io is no nocare 6094 [ 2.363081] [sunxi-ohci2]: probe, pdev->name: 5310000.ohci2-controller, sunxi_ohci: 0xffffff800992b2c0 6095 [ 2.363130] sunxi-ohci 5310000.ohci2-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 6096 [ 2.363160] sunxi-ohci 5310000.ohci2-controller: new USB bus registered, assigned bus number 5 6097 [ 2.363237] sunxi-ohci 5310000.ohci2-controller: irq 291, io mem 0x00000000 6098 [ 2.421123] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 6099 [ 2.421134] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 6100 [ 2.421142] usb usb5: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 6101 [ 2.421149] usb usb5: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 6102 [ 2.421156] usb usb5: SerialNumber: sunxi-ohci 6103 [ 2.422016] hub 5-0:1.0: USB hub found 6104 [ 2.422065] hub 5-0:1.0: 1 port detected 6105 [ 2.422745] get drv_vbus is fail, 84 6106 [ 2.422753] get ohci3-controller, regulator_io is no nocare 6107 [ 2.423090] [sunxi-ohci3]: probe, pdev->name: 5311000.ohci3-controller, sunxi_ohci: 0xffffff800992af78 6108 [ 2.423138] sunxi-ohci 5311000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 6109 [ 2.423165] sunxi-ohci 5311000.ohci3-controller: new USB bus registered, assigned bus number 6 6110 [ 2.423241] sunxi-ohci 5311000.ohci3-controller: irq 293, io mem 0x00000000 6111 [ 2.481119] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 6112 [ 2.481129] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 6113 [ 2.481137] usb usb6: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 6114 [ 2.481144] usb usb6: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 6115 [ 2.481151] usb usb6: SerialNumber: sunxi-ohci 6116 [ 2.481999] hub 6-0:1.0: USB hub found 6117 [ 2.482044] hub 6-0:1.0: 1 port detected 6118 [ 2.482968] ohci-platform: OHCI generic platform driver 6119 [ 2.483728] usbcore: registered new interface driver uas 6120 [ 2.483903] usbcore: registered new interface driver usb-storage 6121 [ 2.483998] usbcore: registered new interface driver ums-alauda 6122 [ 2.484075] usbcore: registered new interface driver ums-cypress 6123 [ 2.484150] usbcore: registered new interface driver ums-datafab 6124 [ 2.484223] usbcore: registered new interface driver ums_eneub6250 6125 [ 2.484316] usbcore: registered new interface driver ums-freecom 6126 [ 2.484395] usbcore: registered new interface driver ums-isd200 6127 [ 2.484468] usbcore: registered new interface driver ums-jumpshot 6128 [ 2.484540] usbcore: registered new interface driver ums-karma 6129 [ 2.484613] usbcore: registered new interface driver ums-onetouch 6130 [ 2.484704] usbcore: registered new interface driver ums-realtek 6131 [ 2.484780] usbcore: registered new interface driver ums-sddr09 6132 [ 2.484857] usbcore: registered new interface driver ums-sddr55 6133 [ 2.484941] usbcore: registered new interface driver ums-usbat 6134 [ 2.485089] usb_serial_number:20080411 6135 [ 2.486316] input: sunxi-keyboard as /devices/virtual/input/input0 6136 [ 2.486971] usbcore: registered new interface driver xpad 6137 [ 2.487100] usbcore: registered new interface driver usb_acecad 6138 [ 2.487191] usbcore: registered new interface driver aiptek 6139 [ 2.487279] usbcore: registered new interface driver gtco 6140 [ 2.487364] usbcore: registered new interface driver hanwang 6141 [ 2.487447] usbcore: registered new interface driver kbtab 6142 [ 2.487928] axp2101_pek: axp2101-pek can not register without irq 6143 [ 2.487951] axp2101-pek: probe of axp2101-pek.0 failed with error -22 6144 [ 2.489416] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0 6145 [ 2.489483] sunxi-rtc rtc: RTC enabled 6146 [ 2.489972] i2c /dev entries driver 6147 [ 2.490942] lirc_dev: IR Remote Control driver registered, major 244 6148 [ 2.490955] IR NEC protocol handler initialized 6149 [ 2.490961] IR RC5(x/sz) protocol handler initialized 6150 [ 2.490967] IR RC6 protocol handler initialized 6151 [ 2.490973] IR JVC protocol handler initialized 6152 [ 2.490978] IR Sony protocol handler initialized 6153 [ 2.490984] IR SANYO protocol handler initialized 6154 [ 2.490990] IR Sharp protocol handler initialized 6155 [ 2.490996] IR MCE Keyboard/mouse protocol handler initialized 6156 [ 2.491002] IR LIRC bridge handler initialized 6157 [ 2.491007] IR XMP protocol handler initialized 6158 [ 2.491532] sunxi_ir_startup: get ir protocol failed 6159 [ 2.491574] 7040000.s_cir supply ir0 not found, using dummy regulator 6160 [ 2.491767] Registered IR keymap rc_map_sunxi 6161 [ 2.492173] input: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0/input1 6162 [ 2.492424] rc rc0: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0 6163 [ 2.493405] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input2 6164 [ 2.494022] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-rc-recv) registered at minor = 0 6165 [ 2.494730] sunxi cedar version 0.1 6166 [ 2.494906] VE: install start!!! 6167 6168 [ 2.495095] cedar_ve: cedar-ve the get irq is 278 6169 [ 2.495719] VE: get debugfs_mpp_root is NULL, please check mpp 6170 6171 [ 2.495733] VE: sunxi ve debug register driver failed! 6172 6173 [ 2.498983] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) 6174 [ 2.500304] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com 6175 [ 2.504005] Bluetooth: HCI UART driver ver 2.3 6176 [ 2.504017] Bluetooth: HCI UART protocol H4 registered 6177 [ 2.504023] Bluetooth: HCI UART protocol LL registered 6178 [ 2.504029] Bluetooth: HCI UART protocol Three-wire (H5) registered 6179 [ 2.508037] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 6180 [ 2.508053] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 6181 [ 2.508065] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 6182 [ 2.508077] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 6183 [ 2.508090] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 6184 [ 2.508101] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 6185 [ 2.508459] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 6186 [ 2.508558] sunxi-mmc sdc0: ***ctl-spec-caps*** 8 6187 [ 2.508751] sunxi-mmc sdc0: No vmmc regulator found 6188 [ 2.508758] sunxi-mmc sdc0: No vqmmc regulator found 6189 [ 2.508764] sunxi-mmc sdc0: No vdmmc regulator found 6190 [ 2.508771] sunxi-mmc sdc0: No vd33sw regulator found 6191 [ 2.508777] sunxi-mmc sdc0: No vd18sw regulator found 6192 [ 2.508783] sunxi-mmc sdc0: No vq33sw regulator found 6193 [ 2.508789] sunxi-mmc sdc0: No vq18sw regulator found 6194 [ 2.509499] sunxi-mmc sdc0: set host busy 6195 [ 2.509585] sunxi-mmc sdc0: Got CD GPIO 6196 [ 2.509947] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 6197 [ 2.509981] sunxi-mmc sdc0: no vqmmc,Check if there is regulator 6198 [ 2.523690] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6199 [ 2.540522] sunxi-mmc sdc0: detmode:gpio irq 6200 [ 2.540557] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6201 [ 2.543067] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6202 [ 2.544448] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 6203 [ 2.544584] sunxi-mmc sdc1: ***ctl-spec-caps*** 8 6204 [ 2.544724] sunxi-mmc sdc1: No vmmc regulator found 6205 [ 2.544731] sunxi-mmc sdc1: No vqmmc regulator found 6206 [ 2.544737] sunxi-mmc sdc1: No vdmmc regulator found 6207 [ 2.544744] sunxi-mmc sdc1: No vd33sw regulator found 6208 [ 2.544750] sunxi-mmc sdc1: No vd18sw regulator found 6209 [ 2.544756] sunxi-mmc sdc1: No vq33sw regulator found 6210 [ 2.544762] sunxi-mmc sdc1: No vq18sw regulator found 6211 [ 2.545126] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6212 [ 2.545596] sunxi-mmc sdc1: set host busy 6213 [ 2.545679] mmc:failed to get gpios 6214 [ 2.545966] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 6215 [ 2.547614] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6216 [ 2.560348] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6217 [ 2.571412] mmc0: host does not support reading read-only switch, assuming write-enable 6218 [ 2.573275] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 6219 [ 2.573349] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 6220 [ 2.573493] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B 6221 [ 2.573584] mmc0: new high speed SDXC card at address 0001 6222 [ 2.577048] sunxi-mmc sdc1: detmode:manually by software 6223 [ 2.578128] mmcblk0: mmc0:0001 SD16G 59.5 GiB 6224 [ 2.579024] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 6225 [ 2.579653] ledtrig-cpu: registered to indicate activity on CPUs 6226 [ 2.579944] mmcblk0: p1 6227 [ 2.580248] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 6228 [ 2.580338] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6229 [ 2.582890] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6230 [ 2.584840] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 6231 [ 2.585679] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 6232 [ 2.586138] sunxi_emce_hw_init()368Unable to get pclk, return fffffffe 6233 [ 2.586147] sunxi_emce_probe()590emce hw init failed! 6234 [ 2.586174] emce: probe of emce failed with error -2 6235 [ 2.586465] hidraw: raw HID events driver (C) Jiri Kosina 6236 [ 2.586518] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 6237 [ 2.587372] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 6238 [ 2.587423] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B 6239 [ 2.591403] usbcore: registered new interface driver usbhid 6240 [ 2.591411] usbhid: USB HID core driver 6241 [ 2.592834] optee: probing for conduit method from DT. 6242 [ 2.592847] optee: api uid mismatch 6243 [ 2.593428] usbcore: registered new interface driver snd-usb-audio 6244 [ 2.595169] [sunxi_hdmi_codec_init] driver and deivce register finished. 6245 [ 2.596779] [sunxi_internal_codec_probe]:get audio avcc failed 6246 [ 2.596820] [sunxi_internal_codec_probe]:get audio vcc3v3-audio failed 6247 [ 2.597237] lineout_vol:26, linein_gain:3, fmin_gain:3, digital_vol:0, adcdrc_cfg:0, adchpf_cfg:0, dacdrc_cfg:0, dachpf_cfg:0, ramp_func_used:1, pa_msleep_time:100, pa_ctl_level:1, gpio-spk:0 6248 [ 2.599761] sunxi-codec-machine sndcodec: sun50iw9-codec <-> cpudai mapping ok 6249 [ 2.601723] sndhdmi sndhdmi: ASoC: CPU DAI (null) not registered 6250 [ 2.601737] sndhdmi sndhdmi: snd_soc_register_card() failed: -517 6251 [ 2.604011] sunxi-ahub-cpudai 5097000.cpudai3-controller: ahub cpudai id invalid 6252 [ 2.604036] sunxi-ahub-cpudai: probe of 5097000.cpudai3-controller failed with error -22 6253 [ 2.608032] sndahub sndahub: sunxi-ahub-aif1 <-> 5097000.cpudai0-controller mapping ok 6254 [ 2.609428] sndahub sndahub: sunxi-ahub-aif2 <-> 5097000.cpudai1-controller mapping ok 6255 [ 2.611366] sndahub sndahub: sunxi-ahub-aif3 <-> 5097000.cpudai2-controller mapping ok 6256 [ 2.614415] pktgen: Packet Generator for packet performance testing. Version: 2.75 6257 [ 2.614849] u32 classifier 6258 [ 2.614856] Actions configured 6259 [ 2.614868] Netfilter messages via NETLINK v0.30. 6260 [ 2.614895] nfnl_acct: registering with nfnetlink. 6261 [ 2.615228] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) 6262 [ 2.615480] ctnetlink v0.93: registering with nfnetlink. 6263 [ 2.616249] xt_time: kernel timezone is -0000 6264 [ 2.616273] IPVS: Registered protocols (TCP, UDP) 6265 [ 2.616381] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) 6266 [ 2.616505] IPVS: Creating netns size=1928 id=0 6267 [ 2.616637] IPVS: ipvs loaded. 6268 [ 2.616645] IPVS: [rr] scheduler registered. 6269 [ 2.616742] ipip: IPv4 and MPLS over IPv4 tunneling driver 6270 [ 2.617538] gre: GRE over IPv4 demultiplexor driver 6271 [ 2.617547] ip_gre: GRE over IPv4 tunneling driver 6272 [ 2.618849] IPv4 over IPsec tunneling driver 6273 [ 2.619693] ip_tables: (C) 2000-2006 Netfilter Core Team 6274 [ 2.619971] arp_tables: arp_tables: (C) 2002 David S. Miller 6275 [ 2.620039] Initializing XFRM netlink socket 6276 [ 2.620073] IPsec XFRM device driver 6277 [ 2.620976] NET: Registered protocol family 10 6278 [ 2.622825] mip6: Mobile IPv6 6279 [ 2.622863] ip6_tables: (C) 2000-2006 Netfilter Core Team 6280 [ 2.624413] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver 6281 [ 2.626030] NET: Registered protocol family 17 6282 [ 2.626072] NET: Registered protocol family 15 6283 [ 2.626229] Bridge firewalling registered 6284 [ 2.626375] Bluetooth: RFCOMM TTY layer initialized 6285 [ 2.626393] Bluetooth: RFCOMM socket layer initialized 6286 [ 2.626423] Bluetooth: RFCOMM ver 1.11 6287 [ 2.626438] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 6288 [ 2.626444] Bluetooth: BNEP filters: protocol multicast 6289 [ 2.626458] Bluetooth: BNEP socket layer initialized 6290 [ 2.626463] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 6291 [ 2.626475] Bluetooth: HIDP socket layer initialized 6292 [ 2.626579] l2tp_core: L2TP core driver, V2.0 6293 [ 2.626595] l2tp_ppp: PPPoL2TP kernel driver, V2.0 6294 [ 2.626601] 8021q: 802.1Q VLAN Support v1.8 6295 [ 2.626806] sctp: Hash tables configured (bind 256/256) 6296 [ 2.627451] Key type dns_resolver registered 6297 [ 2.627591] Registered cp15_barrier emulation handler 6298 [ 2.627604] Registered setend emulation handler 6299 [ 2.628525] registered taskstats version 1 6300 [ 2.640055] zswap: default zpool zbud not available 6301 [ 2.640063] zswap: pool creation failed 6302 [ 2.642876] Btrfs loaded, crc32c=crc32c-arm64-hw 6303 [ 2.643649] HDMI 2.0 driver init start! 6304 [ 2.643665] boot_hdmi=true 6305 [ 2.644470] Can not find the node of esm 6306 [ 2.644492] ERROR: pinctrl_get for HDMI2.0 DDC fail 6307 [ 2.644582] Get hdmi_power0:vcc-hdmi 6308 [ 2.644623] 6000000.hdmi supply vcc-hdmi not found, using dummy regulator 6309 [ 2.644796] Get hdmi_power1:vdd-hdmi 6310 [ 2.644817] 6000000.hdmi supply vdd-hdmi not found, using dummy regulator 6311 [ 2.646384] hdmi_cec_init 6312 [ 2.646837] [DISP] disp_device_attached,line:146: 6313 [ 2.646845] attached ok, mgr0<-->device0, type=4 6314 [ 2.646856] [HDMI receive params]: tv mode: 0xa format:0x0 data bits:0x0 eotf:0x0 cs:0x0 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8 6315 [ 2.646868] [DISP] disp_hdmi_set_mode,line:648: 6316 [ 2.646873] hdmi_set_mode is null! 6317 [ 2.647942] HDMI2.0 module init end 6318 [ 2.659175] sunxi-thermal 5070400.thermal_sensor: avcc is not calibrated 6319 [ 2.662696] cpu cpu1: opp_list_debug_create_link: Failed to create link 6320 [ 2.662709] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12) 6321 [ 2.662740] cpu cpu2: opp_list_debug_create_link: Failed to create link 6322 [ 2.662748] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12) 6323 [ 2.662778] cpu cpu3: opp_list_debug_create_link: Failed to create link 6324 [ 2.662785] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12) 6325 [ 2.665054] sndhdmi sndhdmi: audiohdmi-dai <-> sunxi-ahub-cpu-aif1 mapping ok 6326 [ 2.665950] get det_vbus is fail, 84 6327 [ 2.665958] get id is fail, 84 6328 [ 2.666440] sunxi-rtc rtc: setting system clock to 1970-01-01 00:22:04 UTC (1324) 6329 [ 2.670300] ALSA device list: 6330 [ 2.670309] #0: audiocodec 6331 [ 2.670312] #1: sndahub 6332 [ 2.670315] #2: sndhdmi 6333 [ 2.671925] Freeing unused kernel memory: 3008K 6334 [ 2.717256] random: systemd-udevd: uninitialized urandom read (16 bytes read) 6335 [ 2.719187] random: systemd-udevd: uninitialized urandom read (16 bytes read) 6336 [ 2.722174] random: systemd-udevd: uninitialized urandom read (16 bytes read) 6337 [ 2.790881] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device connect 6338 [ 2.953709] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device disconnect 6339 [ 3.050362] HDMI cable is connected 6340 [ 3.306956] usb 4-1: new full-speed USB device number 2 using sunxi-ohci 6341 [ 3.527153] usb 4-1: New USB device found, idVendor=24ae, idProduct=2013 6342 [ 3.527162] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 6343 [ 3.527168] usb 4-1: Product: Rapoo 2.4G Wireless Device 6344 [ 3.527172] usb 4-1: Manufacturer: RAPOO 6345 [ 3.535130] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.0/0003:24AE:2013.0001/input/input3 6346 [ 3.535857] hid-generic 0003:24AE:2013.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input0 6347 [ 3.542018] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.1/0003:24AE:2013.0002/input/input4 6348 [ 3.598482] hid-generic 0003:24AE:2013.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input1 6349 [ 3.602405] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.2/0003:24AE:2013.0003/input/input5 6350 [ 3.659004] hid-generic 0003:24AE:2013.0003: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input2 6351 [ 4.254527] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) 6352 [ 5.147597] systemd[1]: System time before build time, advancing clock. 6353 [ 5.152434] cgroup: cgroup2: unknown option "nsdelegate,memory_recursiveprot" 6354 [ 5.152993] cgroup: cgroup2: unknown option "nsdelegate" 6355 [ 5.173411] systemd[1]: systemd 252.12-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) 6356 [ 5.173436] systemd[1]: Detected architecture arm64. 6357 [ 5.174620] systemd[1]: Warning! Reported kernel version 4.9.318-legacy-sun50iw9 is older than systemd's required baseline kernel version 4.15. Your mileage may vary. 6358 [ 5.184716] systemd[1]: Hostname set to <opi>. 6359 [ 5.211711] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation 6360 [ 6.679990] (sd-execut[1459]: /usr/lib/systemd/system-generators/netplan failed with exit status 1. 6361 [ 6.827012] 6362 insmod_device_driver 6363 6364 [ 6.827268] device_chose finished 124! 6365 [ 7.178621] systemd[1]: /lib/systemd/system/hdmi-audio.service:10: Support for option SysVStartPriority= has been removed and it is ignored 6366 [ 7.418011] systemd[1]: Queued start job for default target graphical.target. 6367 [ 7.425278] systemd[1]: Created slice system-getty.slice - Slice /system/getty. 6368 [ 7.427470] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. 6369 [ 7.429662] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. 6370 [ 7.431043] systemd[1]: Created slice user.slice - User and Session Slice. 6371 [ 7.431679] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. 6372 [ 7.432218] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 6373 [ 7.432550] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. 6374 [ 7.433083] systemd[1]: Reached target slices.target - Slice Units. 6375 [ 7.433377] systemd[1]: Reached target swap.target - Swaps. 6376 [ 7.433743] systemd[1]: Reached target time-set.target - System Time Set. 6377 [ 7.434281] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. 6378 [ 7.451639] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket. 6379 [ 7.452724] systemd[1]: Listening on syslog.socket - Syslog Socket. 6380 [ 7.453747] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. 6381 [ 7.454427] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. 6382 [ 7.456042] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. 6383 [ 7.457073] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). 6384 [ 7.458147] systemd[1]: Listening on systemd-journald.socket - Journal Socket. 6385 [ 7.460405] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. 6386 [ 7.461331] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. 6387 [ 7.465149] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... 6388 [ 7.469688] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... 6389 [ 7.474704] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... 6390 [ 7.475827] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 6391 [ 7.476789] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). 6392 [ 7.484676] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... 6393 [ 7.490408] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... 6394 [ 7.496305] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... 6395 [ 7.504391] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... 6396 [ 7.513221] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 6397 [ 7.521256] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... 6398 [ 7.534210] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 6399 [ 7.541610] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... 6400 [ 7.548969] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 6401 [ 7.552011] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). 6402 [ 7.560987] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... 6403 [ 7.566893] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... 6404 [ 7.572008] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... 6405 [ 7.582594] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. 6406 [ 7.585445] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. 6407 [ 7.587692] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. 6408 [ 7.590770] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. 6409 [ 7.594680] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. 6410 [ 7.598538] systemd[1]: modprobe@configfs.service: Deactivated successfully. 6411 [ 7.599539] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. 6412 [ 7.600206] fuse init (API version 7.26) 6413 [ 7.602681] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 6414 [ 7.604458] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 6415 [ 7.608567] systemd[1]: modprobe@drm.service: Deactivated successfully. 6416 [ 7.624464] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. 6417 [ 7.647729] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro 6418 [ 7.671022] fbtft: module is from the staging directory, the quality is unknown, you have been warned. 6419 [ 7.678825] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned. 6420 [ 7.679738] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 6421 [ 7.679751] spidev spi1.1: dh2228fv spi1.1 16777kHz 8 bits mode=0x00 6422 [ 7.679938] spidev spi1.1: Deleting spi1.1 6423 [ 7.681122] fbtft_device: GPIOS used by 'fb_st7735r': 6424 [ 7.681130] fbtft_device: 'reset' = GPIO73 6425 [ 7.681134] fbtft_device: 'dc' = GPIO70 6426 [ 7.681147] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 6427 [ 7.681152] spi spi1.1: fb_st7735r spi1.1 16000kHz 8 bits mode=0x00 6428 [ 7.682299] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 6429 [ 7.694285] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 6430 [ 7.700918] systemd[1]: modprobe@fuse.service: Deactivated successfully. 6431 [ 7.701801] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. 6432 [ 7.704713] systemd[1]: modprobe@loop.service: Deactivated successfully. 6433 [ 7.705487] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 6434 [ 7.718320] WCN: marlin_init entry! 6435 [ 7.719543] WCN: marlin_parse_dt reset gpio=211 6436 [ 7.719554] WCN_ERR: gpio reset request err: 211 6437 [ 7.719560] WCN: wcn config bt wake host 6438 [ 7.720070] WCN: marlin_registsr_bt_wake bt_hostwake gpio=208 mul-sel=6 pull=-1 drv_level=-1 data=0 intnum=193 6439 [ 7.720400] WCN: wcn config wifi wake host 6440 [ 7.720428] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 6441 [ 7.723976] sdiohal:sdiohal_init ok 6442 [ 7.724860] WCN: marlin_probe ok! 6443 [ 7.733508] mtty_probe init device addr: 0xffffffc009756300 6444 [ 7.733750] -->rfkill_bluetooth_init 6445 [ 7.733974] <--rfkill_bluetooth_init 6446 [ 7.751476] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. 6447 [ 7.760549] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... 6448 [ 7.777992] WCN: start_marlin [MARLIN_WIFI] 6449 [ 7.778004] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 6450 [ 7.778007] WCN: the first power on start 6451 [ 7.784001] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... 6452 [ 7.785242] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 6453 [ 7.791742] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... 6454 [ 7.792850] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 6455 [ 7.799736] systemd[1]: Starting systemd-sysusers.service - Create System Users... 6456 [ 7.816104] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. 6457 [ 7.818743] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. 6458 [ 7.824547] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. 6459 [ 7.880072] systemd[1]: Finished systemd-sysusers.service - Create System Users. 6460 [ 7.893738] WCN: marlin chip en pull up 6461 [ 7.913856] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... 6462 [ 7.923686] sdiohal:sdiohal_scan_card 6463 [ 7.923702] sunxi-wlan soc@03000000:wlan: bus_index: 1 6464 [ 7.923749] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 6465 [ 7.940352] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6466 [ 7.957817] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 6467 [ 7.958681] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 6468 [ 7.958732] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6469 [ 7.961342] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6470 [ 7.964519] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6471 [ 7.980323] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 6472 [ 7.991478] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B 6473 [ 7.992265] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 6474 [ 7.992481] sunxi-mmc sdc1: sdc set ios:clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 6475 [ 7.993275] mmc1: new ultra high speed SDR104 SDIO card at address 8800 6476 [ 7.994154] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=150000000 6477 [ 7.994414] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 6478 [ 7.994440] WCN: marlin_scan_finish! 6479 [ 7.994444] sdiohal:probe ok 6480 [ 7.994497] sdiohal:scan end! 6481 [ 7.994504] WCN: then marlin start to download 6482 [ 7.994525] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! 6483 [ 8.028352] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices. 6484 [ 8.064490] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown... 6485 [ 8.070144] systemd[1]: Starting systemd-udev-settle.service - Wait for udev To Complete Device Initialization... 6486 [ 8.072860] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. 6487 [ 8.075576] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. 6488 [ 8.083857] systemd[1]: Mounting tmp.mount - /tmp... 6489 [ 8.104791] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... 6490 [ 8.108173] systemd[1]: Finished ifupdown-pre.service - Helper to synchronize boot up for ifupdown. 6491 [ 8.114375] systemd[1]: Mounted tmp.mount - /tmp. 6492 [ 8.125610] systemd[1]: Reached target local-fs.target - Local File Systems. 6493 [ 8.131996] WCN: combin_img 0 marlin_firmware_write finish and successful 6494 [ 8.132017] systemd[1]: Starting armbian-led-state.service - Armbian leds state... 6495 [ 8.132412] WCN: marlin_start_run read reset reg val:0x1 6496 [ 8.132420] WCN: after do marlin_start_run reset reg val:0x0 6497 [ 8.132740] WCN: s_marlin_bootup_time=8132731884 6498 [ 8.139412] WCN: clock mode: TSX 6499 [ 8.139605] WCN: marlin_write_cali_data sync init_state:0x1a0f50 6500 [ 8.158138] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config... 6501 [ 8.165206] systemd[1]: Starting console-setup.service - Set console font and keymap... 6502 [ 8.166614] WCN: marlin_write_cali_data sync init_state:0x1a0f50 6503 [ 8.172428] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data... 6504 [ 8.186760] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 6505 [ 8.190913] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1 6506 [ 8.190922] WCN: sdio_config bt_wake_host trigger:[high] 6507 [ 8.190926] WCN: sdio_config irq:[inband] 6508 [ 8.190929] WCN: sdio_config wl_wake_host trigger:[high] 6509 [ 8.190934] WCN: sdio_config wake_host_level_duration_time:[20ms] 6510 [ 8.190937] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse] 6511 [ 8.190941] WCN: marlin_send_sdio_config_to_cp sdio_config:0xb8f01 (enable config) 6512 [ 8.191424] WCN: marlin_write_cali_data finish 6513 [ 8.191680] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 6514 [ 8.195894] systemd[1]: Starting ufw.service - Uncomplicated firewall... 6515 [ 8.206647] systemd[1]: Finished console-setup.service - Set console font and keymap. 6516 [ 8.217359] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 6517 [ 8.243964] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 6518 [ 8.248385] systemd[1]: Received SIGRTMIN+20 from PID 1421 (plymouthd). 6519 [ 8.250720] systemd[1]: Finished ufw.service - Uncomplicated firewall. 6520 [ 8.255168] systemd[1]: Reached target network-pre.target - Preparation for Network. 6521 [ 8.261346] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data. 6522 [ 8.270807] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 6523 [ 8.290946] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 6524 [ 8.291585] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 6525 [ 8.297313] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 6526 [ 8.307628] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 6527 [ 8.318753] systemd[1]: Finished armbian-led-state.service - Armbian leds state. 6528 [ 8.324025] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0 6529 [ 8.324035] WCN: marlin_bind_verify confuse data: 0x8badefa1b12bbe26aeffa8d1a5c07 6530 [ 8.324052] WCN: marlin_bind_verify verify data: 0xccd7f963c19581907680f88f2044f687 6531 [ 8.324656] WCN: check_cp_ready sync val:0xf0f0f0f7, prj_type val:0x0 6532 [ 8.350520] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0 6533 [ 8.350528] sdiohal:sdiohal_runtime_get entry 6534 [ 8.350678] WCN: get_cp2_version entry! 6535 [ 8.352067] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~ 6536 [ 8.352082] WCN: switch_cp2_log - close entry! 6537 [ 8.353466] WCN: WCND at cmd read:OK 6538 [ 8.353509] WCN: then marlin download finished and run ok 6539 [ 8.353515] WCN: start_loopcheck 6540 [ 8.366973] WCN: get_board_ant_num [one_ant] 6541 [ 8.366985] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini 6542 [ 8.459917] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings. 6543 [ 8.464808] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. 6544 [ 8.471521] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... 6545 [ 8.538395] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. 6546 [ 8.548382] systemd[1]: Starting networking.service - Raise network interfaces... 6547 [ 8.612143] zram: Added device: zram0 6548 [ 8.614514] zram: Added device: zram1 6549 [ 8.615542] zram: Added device: zram2 6550 [ 8.651867] zswap: can't enable, initialization failed 6551 [ 8.699500] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files. 6552 [ 8.703442] zram0: detected capacity change from 0 to 506396672 6553 [ 8.720976] systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen... 6554 [ 8.786344] systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen. 6555 [ 8.792421] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 6556 [ 8.794501] systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch. 6557 [ 8.795219] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. 6558 [ 8.805873] fb_st7735r: module is from the staging directory, the quality is unknown, you have been warned. 6559 [ 9.145127] systemd[1]: Finished networking.service - Raise network interfaces. 6560 [ 10.030601] graphics fb1: fb_st7735r frame buffer, 160x128, 40 KiB video memory, 4 KiB buffer memory, fps=20, spi1.1 at 16 MHz 6561 [ 10.148026] systemd[1]: Found device dev-ttyS0.device - /dev/ttyS0. 6562 [ 10.292618] systemd[1]: Reached target usb-gadget.target - Hardware activated USB gadget. 6563 [ 10.937818] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 6564 [ 10.938089] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 6565 [ 10.938840] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch. 6566 [ 10.939951] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 6567 [ 10.953804] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 6568 [ 10.966397] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 6569 [ 10.976169] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 6570 [ 10.983026] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 6571 [ 10.988631] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 6572 [ 10.989717] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 6573 [ 10.994754] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 6574 [ 10.995641] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 6575 [ 11.002768] systemd[1]: modprobe@loop.service: Deactivated successfully. 6576 [ 11.003539] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 6577 [ 11.006299] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 6578 [ 11.006531] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 6579 [ 11.061551] systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status... 6580 [ 11.063576] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 6581 [ 11.064633] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 6582 [ 11.065824] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 6583 [ 11.105893] sunxi-bt soc@03000000:bt: block state already is 1 6584 [ 11.108477] bluetooth_set_power: start_block=1 6585 [ 11.108493] WCN: marlin power state:4, subsys: [MARLIN_BLUETOOTH] power 0 6586 [ 11.108497] WCN: can not power off, other module is on 6587 [ 11.108505] bluetooth_set_power: end_block=1 6588 [ 11.119009] systemd[1]: Started systemd-rfkill.service - Load/Save RF Kill Switch Status. 6589 [ 11.163270] systemd[1]: Finished systemd-udev-settle.service - Wait for udev To Complete Device Initialization. 6590 [ 11.169077] systemd[1]: Starting brltty.service - Braille Device Support... 6591 [ 11.738965] Adding 494524k swap on /dev/zram0. Priority:5 extents:1 across:494524k SSFS 6592 [ 11.887401] zram1: detected capacity change from 0 to 52428800 6593 [ 11.901934] systemd[1]: Started brltty.service - Braille Device Support. 6594 [ 11.929997] input: BRLTTY 6.5 Linux Screen Driver Keyboard as /devices/virtual/input/input6 6595 [ 15.993123] systemd[1]: Finished armbian-zram-config.service - Armbian ZRAM config. 6596 [ 15.999188] systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging... 6597 [ 16.060586] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard 6598 [ 16.128164] systemd[1]: systemd-rfkill.service: Deactivated successfully. 6599 [ 19.887335] systemd[1]: Finished armbian-ramlog.service - Armbian memory supported logging. 6600 [ 19.894062] systemd[1]: Starting systemd-journald.service - Journal Service... 6601 [ 20.169716] systemd-journald[1922]: Data hash table of /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal has a fill level at 75.0 (1654 of 2204 items, 1269760 file size, 767 bytes per hash table item), suggesting rotation. 6602 [ 20.169738] systemd-journald[1922]: /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal: Journal header limits reached or header out-of-date, rotating. 6603 [ 20.176762] systemd[1]: Started systemd-journald.service - Journal Service. 6604 [ 20.223448] systemd-journald[1922]: Received client request to flush runtime journal. 6605 [ 20.493386] IPVS: Creating netns size=1928 id=1 6606 6607 ### armbian-release: 6608 6609 # PLEASE DO NOT EDIT THIS FILE 6610 BOARD=orangepizero2 6611 BOARD_NAME="Orange Pi Zero2" 6612 BOARDFAMILY=sun50iw9 6613 BUILD_REPOSITORY_URL=https://github.com/armbian/build 6614 BUILD_REPOSITORY_COMMIT=ac829eb6 6615 LINUXFAMILY=sun50iw9 6616 ARCH=arm64 6617 IMAGE_TYPE=stable 6618 BOARD_TYPE=conf 6619 INITRD_ARCH=arm 6620 KERNEL_IMAGE_TYPE=Image 6621 FORCE_BOOTSCRIPT_UPDATE=yes 6622 VENDOR=Armbian 6623 BOOTSCRIPT_FORCE_UPDATE="yes" 6624 BOOTSCRIPT_DST="boot.cmd" 6625 VERSION=23.8.1 6626 REVISION=23.8.1 6627 BRANCH=legacy 6628 6629 ### boot environment: 6630 6631 verbosity=1 6632 console=serial 6633 #disp_mode=1080p60 6634 #fb0_width=1280 6635 #fb0_height=720 6636 rootdev=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e 6637 rootfstype=ext4 6638 overlays=spi-spidev 6639 param_spidev_spi_bus=1 6640 param_spidev_spi_cs=1 6641 extraargs=fbcon=map:1 6642 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u 6643 6644 ### lsusb: 6645 6646 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 6647 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 6648 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 6649 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 6650 Bus 004 Device 002: ID 24ae:2013 Shenzhen Rapoo Technology Co., Ltd. Rapoo 2.4G Wireless Device 6651 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 6652 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 6653 6654 ### lscpu: 6655 6656 Architecture: aarch64 6657 CPU op-mode(s): 32-bit, 64-bit 6658 Byte Order: Little Endian 6659 CPU(s): 4 6660 On-line CPU(s) list: 0-3 6661 Vendor ID: ARM 6662 Model name: Cortex-A53 6663 Model: 4 6664 Thread(s) per core: 1 6665 Core(s) per cluster: 4 6666 Socket(s): - 6667 Cluster(s): 1 6668 Stepping: r0p4 6669 CPU(s) scaling MHz: 100% 6670 CPU max MHz: 1512.0000 6671 CPU min MHz: 480.0000 6672 BogoMIPS: 48.00 6673 Flags: fp asimd aes pmull sha1 sha2 crc32 6674 6675 ### cpuinfo: 6676 6677 processor : 0 6678 BogoMIPS : 48.00 6679 Features : fp asimd aes pmull sha1 sha2 crc32 6680 CPU implementer : 0x41 6681 CPU architecture: 8 6682 CPU variant : 0x0 6683 CPU part : 0xd03 6684 CPU revision : 4 6685 6686 processor : 1 6687 BogoMIPS : 48.00 6688 Features : fp asimd aes pmull sha1 sha2 crc32 6689 CPU implementer : 0x41 6690 CPU architecture: 8 6691 CPU variant : 0x0 6692 CPU part : 0xd03 6693 CPU revision : 4 6694 6695 processor : 2 6696 BogoMIPS : 48.00 6697 Features : fp asimd aes pmull sha1 sha2 crc32 6698 CPU implementer : 0x41 6699 CPU architecture: 8 6700 CPU variant : 0x0 6701 CPU part : 0xd03 6702 CPU revision : 4 6703 6704 processor : 3 6705 BogoMIPS : 48.00 6706 Features : fp asimd aes pmull sha1 sha2 crc32 6707 CPU implementer : 0x41 6708 CPU architecture: 8 6709 CPU variant : 0x0 6710 CPU part : 0xd03 6711 CPU revision : 4 6712 6713 6714 ### meminfo: 6715 6716 MemTotal: 989056 kB 6717 MemFree: 792776 kB 6718 MemAvailable: 886300 kB 6719 Buffers: 15368 kB 6720 Cached: 85348 kB 6721 SwapCached: 0 kB 6722 Active: 64416 kB 6723 Inactive: 56496 kB 6724 Active(anon): 20552 kB 6725 Inactive(anon): 644 kB 6726 Active(file): 43864 kB 6727 Inactive(file): 55852 kB 6728 Unevictable: 0 kB 6729 Mlocked: 0 kB 6730 SwapTotal: 494524 kB 6731 SwapFree: 494524 kB 6732 Dirty: 9360 kB 6733 Writeback: 0 kB 6734 AnonPages: 20404 kB 6735 Mapped: 24492 kB 6736 Shmem: 828 kB 6737 Slab: 33092 kB 6738 SReclaimable: 9260 kB 6739 SUnreclaim: 23832 kB 6740 KernelStack: 2544 kB 6741 PageTables: 1056 kB 6742 NFS_Unstable: 0 kB 6743 Bounce: 0 kB 6744 WritebackTmp: 0 kB 6745 CommitLimit: 989052 kB 6746 Committed_AS: 75080 kB 6747 VmallocTotal: 263061440 kB 6748 VmallocUsed: 0 kB 6749 VmallocChunk: 0 kB 6750 CmaTotal: 16384 kB 6751 CmaFree: 7468 kB 6752 HugePages_Total: 0 6753 HugePages_Free: 0 6754 HugePages_Rsvd: 0 6755 HugePages_Surp: 0 6756 Hugepagesize: 2048 kB 6757 6758 ### virtual memory: 6759 6760 vm.admin_reserve_kbytes = 8192 6761 vm.block_dump = 0 6762 vm.compact_unevictable_allowed = 1 6763 vm.dirty_background_bytes = 0 6764 vm.dirty_background_ratio = 10 6765 vm.dirty_bytes = 0 6766 vm.dirty_expire_centisecs = 3000 6767 vm.dirty_ratio = 20 6768 vm.dirtytime_expire_seconds = 43200 6769 vm.dirty_writeback_centisecs = 500 6770 vm.extfrag_threshold = 500 6771 vm.extra_free_kbytes = 0 6772 vm.hugepages_treat_as_movable = 0 6773 vm.hugetlb_shm_group = 0 6774 vm.laptop_mode = 0 6775 vm.legacy_va_layout = 0 6776 vm.lowmem_reserve_ratio = 256 32 6777 vm.max_map_count = 65530 6778 vm.min_free_kbytes = 3937 6779 vm.mmap_min_addr = 4096 6780 vm.mmap_rnd_bits = 18 6781 vm.mmap_rnd_compat_bits = 11 6782 vm.nr_hugepages = 0 6783 vm.nr_overcommit_hugepages = 0 6784 vm.nr_pdflush_threads = 0 6785 vm.oom_dump_tasks = 1 6786 vm.oom_kill_allocating_task = 0 6787 vm.overcommit_kbytes = 0 6788 vm.overcommit_memory = 0 6789 vm.overcommit_ratio = 50 6790 vm.page-cluster = 0 6791 vm.panic_on_oom = 0 6792 vm.percpu_pagelist_fraction = 0 6793 vm.stat_interval = 1 6794 vm.swappiness = 100 6795 vm.user_reserve_kbytes = 30000 6796 vm.vfs_cache_pressure = 100 6797 vm.watermark_scale_factor = 10 6798 6799 ### ip addr: 6800 6801 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 6802 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 6803 inet XXX.XXX.0.1/8 scope host lo 6804 valid_lft forever preferred_lft forever 6805 inet6 ::1/128 scope host noprefixroute 6806 valid_lft forever preferred_lft forever 6807 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 6808 link/ether a2:f9:75:52:ad:58 brd ff:ff:ff:ff:ff:ff 6809 3: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 6810 link/ether fa:6e:f4:da:68:8c brd ff:ff:ff:ff:ff:ff 6811 4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 6812 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 6813 5: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN group default qlen 1 6814 link/gre XXX.XXX.0.0 brd XXX.XXX.0.0 6815 6: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN group default qlen 1000 6816 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 6817 7: ip_vti0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 6818 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 6819 8: ip6_vti0@NONE: <NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1 6820 link/tunnel6 :: brd :: 6821 9: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 6822 link/sit XXX.XXX.0.0 brd XXX.XXX.0.0 6823 10: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN group default qlen 1 6824 link/tunnel6 :: brd :: 6825 11: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 6826 link/ether 48:c9:27:84:d1:40 brd ff:ff:ff:ff:ff:ff 6827 6828 ### partitions: 6829 6830 major minor #blocks name 6831 6832 179 0 62410752 mmcblk0 6833 179 1 61763584 mmcblk0p1 6834 253 0 494528 zram0 6835 253 1 51200 zram1 6836 6837 ### df: 6838 6839 udev 466M 0 466M 0% /dev 6840 tmpfs 97M 2.1M 95M 3% /run 6841 /dev/mmcblk0p1 58G 7.3G 51G 13% / 6842 tmpfs 483M 0 483M 0% /dev/shm 6843 tmpfs 5.0M 0 5.0M 0% /run/lock 6844 tmpfs 483M 4.0K 483M 1% /tmp 6845 /dev/zram1 47M 8.8M 35M 21% /var/log 6846 6847 ### lsblk: 6848 6849 NAME FSTYPE SIZE MOUNTPOINT UUID 6850 mmcblk0 59.5G 6851 └─mmcblk0p1 ext4 58.9G / 0c85f38a-a16e-49a0-a53c-99d9856e983e 6852 zram1 50M /var/log 6853 zram2 0B 6854 6855 ### zramctl: 6856 6857 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT 6858 /dev/zram1 lz4 50M 8.9M 2.4M 2.9M 4 /var/log 6859 /dev/zram0 lzo 482.9M 4K 76B 12K 4 [SWAP] 6860 6861 ### mtab: 6862 6863 /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 6864 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 6865 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 6866 6867 ### mmc0:0001 info: 6868 6869 manfid: 0x0000fe 6870 cid: fe3432534431364720000000690091f5 6871 fwrev: 0x0 6872 csd: 400e00325b590001dc277f800a40008b 6873 ocr: 0x00200000 6874 type: SD 6875 date: 01/2009 6876 hwrev: 0x2 6877 dsr: 0x404 6878 serial: 0x00000069 6879 erase_size: 512 6880 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SD16G MODALIAS=mmc:block 6881 ssr: 000000000800000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 6882 scr: 0285808300000000 6883 oemid: 0x3432 6884 preferred_erase_size: 4194304 6885 name: SD16G 6886 6887 ### Boot system health: 6888 6889 Time CPU load %cpu %sys %usr %nice %io %irq Tcpu C.St. 6890 14:38:29 1512 MHz 1.17 39% 18% 13% 0% 6% 0% 50.8 °C 0/5 6891 14:38:29 1512 MHz 1.17 95% 32% 36% 0% 25% 0% 50.8 °C 0/5 6892 14:38:30 1512 MHz 1.17 100% 34% 57% 1% 7% 0% 49.7 °C 0/5 6893 14:38:30 1512 MHz 1.17 99% 27% 42% 0% 29% 0% 49.7 °C 0/5 6894 14:38:31 1512 MHz 1.17 94% 10% 12% 1% 71% 0% 50.2 °C 0/5 6895 6896 ### Activated 1 lzo zram swap devices with 482MB each. 6897 ### Activated Armbian ramlog partition with lz4 compression 6898 6899 Mon Sep 25 03:19:04 PM -03 2023 | Orange Pi Zero2 | 23.8.1 | arm64 | aarch64 | 4.9.318-legacy-sun50iw9 6900 6901 ### dmesg: 6902 6903 [ 0.000000] Booting Linux on physical CPU 0x0 6904 [ 0.000000] Linux version 4.9.318-legacy-sun50iw9 (armbian@next) (gcc version 11.4.0 (Ubuntu 11.4.0-1ubuntu1~22.04) ) #1 SMP PREEMPT Tue May 17 02:06:13 UTC 2022 6905 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] 6906 [ 0.000000] disp reserve base 0x7bf4fcc0 ,size 0x384000 6907 [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 6908 [ 0.000000] On node 0 totalpages: 262144 6909 [ 0.000000] DMA zone: 4096 pages used for memmap 6910 [ 0.000000] DMA zone: 0 pages reserved 6911 [ 0.000000] DMA zone: 262144 pages, LIFO batch:31 6912 [ 0.000000] psci: probing for conduit method from DT. 6913 [ 0.000000] psci: PSCIv1.0 detected in firmware. 6914 [ 0.000000] psci: Using standard PSCI v0.2 function IDs 6915 [ 0.000000] psci: Trusted OS migration not required 6916 [ 0.000000] psci: SMC Calling Convention v1.0 6917 [ 0.000000] percpu: Embedded 21 pages/cpu s45592 r8192 d32232 u86016 6918 [ 0.000000] pcpu-alloc: s45592 r8192 d32232 u86016 alloc=21*4096 6919 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 6920 [ 0.000000] Detected VIPT I-cache on CPU0 6921 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 6922 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258048 6923 [ 0.000000] Kernel command line: root=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e rootwait rootfstype=ext4 splash=verbose console=ttyS0,115200 consoleblank=0 loglevel=1 ubootpart=68ea14b7-01 disp_reserve=3686400,0x7bf4fcc0 fbcon=map:1 6924 [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes 6925 [ 0.000000] log_buf_len total cpu_extra contributions: 393216 bytes 6926 [ 0.000000] log_buf_len min size: 131072 bytes 6927 [ 0.000000] log_buf_len: 524288 bytes 6928 [ 0.000000] early log buf free: 129352(98%) 6929 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) 6930 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) 6931 [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) 6932 [ 0.000000] Memory: 952408K/1048576K available (11902K kernel code, 1476K rwdata, 6668K rodata, 3008K init, 674K bss, 79784K reserved, 16384K cma-reserved) 6933 [ 0.000000] Virtual kernel memory layout: 6934 [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) 6935 [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) 6936 [ 0.000000] .text : 0xffffff8008208000 - 0xffffff8008da8000 ( 11904 KB) 6937 [ 0.000000] .rodata : 0xffffff8008da8000 - 0xffffff8009438000 ( 6720 KB) 6938 [ 0.000000] .init : 0xffffff8009438000 - 0xffffff8009728000 ( 3008 KB) 6939 [ 0.000000] .data : 0xffffff8009728000 - 0xffffff8009899008 ( 1477 KB) 6940 [ 0.000000] .bss : 0xffffff8009899008 - 0xffffff8009941b94 ( 675 KB) 6941 [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) 6942 [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) 6943 [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) 6944 [ 0.000000] 0xffffffbf00000000 - 0xffffffbf01000000 ( 16 MB actual) 6945 [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB) 6946 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 6947 [ 0.000000] Preemptible hierarchical RCU implementation. 6948 [ 0.000000] Build-time adjustment of leaf fanout to 64. 6949 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 6950 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns 6951 [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt). 6952 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 6953 [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 6954 [ 0.000233] Console: colour dummy device 80x25 6955 [ 0.000248] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) 6956 [ 0.000257] pid_max: default: 32768 minimum: 301 6957 [ 0.000453] Security Framework initialized 6958 [ 0.000462] AppArmor: AppArmor disabled by boot time parameter 6959 [ 0.000578] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) 6960 [ 0.000584] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) 6961 [ 0.001853] sched-energy: CPU device node has no sched-energy-costs 6962 [ 0.001868] Invalid sched_group_energy for CPU0 6963 [ 0.001875] CPU0: update cpu_capacity 1024 6964 [ 0.008962] ASID allocator initialised with 32768 entries 6965 [ 0.027934] BOOTEVENT: 27.918666: ON 6966 [ 0.055912] Detected VIPT I-cache on CPU1 6967 [ 0.055965] Invalid sched_group_energy for CPU1 6968 [ 0.055970] CPU1: update cpu_capacity 1024 6969 [ 0.055973] CPU1: Booted secondary processor [410fd034] 6970 [ 0.079298] Detected VIPT I-cache on CPU2 6971 [ 0.079335] Invalid sched_group_energy for CPU2 6972 [ 0.079338] CPU2: update cpu_capacity 1024 6973 [ 0.079341] CPU2: Booted secondary processor [410fd034] 6974 [ 0.102698] Detected VIPT I-cache on CPU3 6975 [ 0.102733] Invalid sched_group_energy for CPU3 6976 [ 0.102736] CPU3: update cpu_capacity 1024 6977 [ 0.102739] CPU3: Booted secondary processor [410fd034] 6978 [ 0.102819] Brought up 4 CPUs 6979 [ 0.102827] SMP: Total of 4 processors activated. 6980 [ 0.102835] CPU features: detected feature: 32-bit EL0 Support 6981 [ 0.102841] CPU features: detected feature: Kernel page table isolation (KPTI) 6982 [ 0.106589] CPU: All CPU(s) started at EL1 6983 [ 0.106610] alternatives: patching kernel code 6984 [ 0.106786] Invalid sched_group_energy for CPU3 6985 [ 0.106795] CPU3: update max cpu_capacity 1024 6986 [ 0.106801] Invalid sched_group_energy for Cluster3 6987 [ 0.106806] Invalid sched_group_energy for CPU2 6988 [ 0.106811] Invalid sched_group_energy for Cluster2 6989 [ 0.106816] Invalid sched_group_energy for CPU1 6990 [ 0.106822] Invalid sched_group_energy for Cluster1 6991 [ 0.106826] Invalid sched_group_energy for CPU0 6992 [ 0.106832] Invalid sched_group_energy for Cluster0 6993 [ 0.108261] devtmpfs: initialized 6994 [ 0.112714] CPU1: update max cpu_capacity 1024 6995 [ 0.143376] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns 6996 [ 0.143397] futex hash table entries: 1024 (order: 5, 131072 bytes) 6997 [ 0.144050] xor: measuring software checksum speed 6998 [ 0.176262] 8regs : 1933.200 MB/sec 6999 [ 0.209641] 8regs_prefetch: 1720.800 MB/sec 7000 [ 0.243028] 32regs : 2287.200 MB/sec 7001 [ 0.276414] 32regs_prefetch: 1995.600 MB/sec 7002 [ 0.276420] xor: using function: 32regs (2287.200 MB/sec) 7003 [ 0.276481] atomic64_test: passed 7004 [ 0.276487] pinctrl core: initialized pinctrl subsystem 7005 [ 0.277654] NET: Registered protocol family 16 7006 [ 0.278817] dump_class_init,861, success 7007 [ 0.296479] cpuidle: using governor menu 7008 [ 0.297921] sunxi iommu: irq = 8 7009 [ 0.298250] vdso: 2 pages (1 code @ ffffff8008daf000, 1 data @ ffffff800972c000) 7010 [ 0.298267] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. 7011 [ 0.299690] DMA: preallocated 256 KiB pool for atomic allocations 7012 [ 0.301073] sun50iw9p1-r-pinctrl r_pio: initialized sunXi PIO driver 7013 [ 0.315450] sun50iw9p1-pinctrl pio: initialized sunXi PIO driver 7014 [ 0.319373] iommu: Adding device 1c0e000.ve to group 0 7015 [ 0.319896] iommu: Adding device 1c00000.vp9 to group 0 7016 [ 0.331336] iommu: Adding device 1000000.disp to group 0 7017 [ 0.332744] iommu: Adding device 1480000.g2d to group 0 7018 [ 0.335938] iommu: Adding device csi0 to group 0 7019 [ 0.336392] iommu: Adding device csi1 to group 0 7020 [ 0.337594] iommu: Adding device 6600800.vind:scaler@0 to group 0 7021 [ 0.337887] iommu: Adding device 6600800.vind:scaler@1 to group 0 7022 [ 0.338197] iommu: Adding device 6600800.vind:scaler@2 to group 0 7023 [ 0.338484] iommu: Adding device 6600800.vind:scaler@3 to group 0 7024 [ 0.338767] iommu: Adding device 6600800.vind:scaler@4 to group 0 7025 [ 0.339049] iommu: Adding device 6600800.vind:scaler@5 to group 0 7026 [ 0.340020] iommu: Adding device vinc0 to group 0 7027 [ 0.340615] iommu: Adding device vinc1 to group 0 7028 [ 0.342081] iommu: Adding device 1420000.deinterlace to group 0 7029 [ 0.387873] HugeTLB registered 2 MB page size, pre-allocated 0 pages 7030 [ 0.444149] raid6: int64x1 gen() 393 MB/s 7031 [ 0.500762] raid6: int64x1 xor() 364 MB/s 7032 [ 0.557586] raid6: int64x2 gen() 591 MB/s 7033 [ 0.614335] raid6: int64x2 xor() 512 MB/s 7034 [ 0.671105] raid6: int64x4 gen() 840 MB/s 7035 [ 0.727900] raid6: int64x4 xor() 629 MB/s 7036 [ 0.784647] raid6: int64x8 gen() 964 MB/s 7037 [ 0.841457] raid6: int64x8 xor() 655 MB/s 7038 [ 0.898234] raid6: neonx1 gen() 648 MB/s 7039 [ 0.954993] raid6: neonx1 xor() 641 MB/s 7040 [ 1.011776] raid6: neonx2 gen() 976 MB/s 7041 [ 1.068564] raid6: neonx2 xor() 819 MB/s 7042 [ 1.125350] raid6: neonx4 gen() 1287 MB/s 7043 [ 1.182100] raid6: neonx4 xor() 965 MB/s 7044 [ 1.238914] raid6: neonx8 gen() 1324 MB/s 7045 [ 1.295675] raid6: neonx8 xor() 991 MB/s 7046 [ 1.295680] raid6: using algorithm neonx8 gen() 1324 MB/s 7047 [ 1.295685] raid6: .... xor() 991 MB/s, rmw enabled 7048 [ 1.295691] raid6: using intx1 recovery algorithm 7049 [ 1.295829] pwm module init! 7050 [ 1.300128] sunxi-pm debug v3.10 7051 [ 1.301208] SCSI subsystem initialized 7052 [ 1.301846] sunxi_spi_probe()2299 - [spi0] SPI MASTER MODE 7053 [ 1.301929] sunxi_spi_request_gpio()1927 - [spi0] Pinctrl init spi0 7054 [ 1.302048] sunxi_spi_clk_init()1977 - [spi0] mclk 100000000 7055 [ 1.302569] spi spi0: master is unqueued, this is deprecated 7056 [ 1.302881] sunxi_spi_probe()2379 - [spi0]: driver probe succeed, base ffffff8008066000, irq 294 7057 [ 1.303458] sunxi_spi_probe()2299 - [spi1] SPI MASTER MODE 7058 [ 1.303540] sunxi_spi_request_gpio()1927 - [spi1] Pinctrl init spi1 7059 [ 1.303657] sunxi_spi_clk_init()1977 - [spi1] mclk 100000000 7060 [ 1.304121] spi spi1: master is unqueued, this is deprecated 7061 [ 1.304430] sunxi_spi_probe()2379 - [spi1]: driver probe succeed, base ffffff8008068000, irq 295 7062 [ 1.305270] usbcore: registered new interface driver usbfs 7063 [ 1.305352] usbcore: registered new interface driver hub 7064 [ 1.305421] usbcore: registered new device driver usb 7065 [ 1.305590] sunxi_i2c_adap_init()2522 - init 7066 [ 1.306154] sunxi_i2c_probe()2208 - [i2c3] warning: failed to get regulator id 7067 [ 1.306248] sunxi_i2c_probe()2270 - [i2c3] twi_drv_used = 0 7068 [ 1.306255] sunxi_i2c_probe()2274 - [i2c3] twi_pkt_interval = 0 7069 [ 1.306271] twi3 supply twi not found, using dummy regulator 7070 [ 1.306354] twi_request_gpio()451 - [i2c3] init name: twi3 7071 [ 1.307109] sunxi_i2c_probe()2208 - [i2c5] warning: failed to get regulator id 7072 [ 1.307190] sunxi_i2c_probe()2270 - [i2c5] twi_drv_used = 0 7073 [ 1.307197] sunxi_i2c_probe()2274 - [i2c5] twi_pkt_interval = 0 7074 [ 1.307211] twi5 supply twi not found, using dummy regulator 7075 [ 1.307285] twi_request_gpio()451 - [i2c5] init name: twi5 7076 [ 1.307766] axp20x-i2c 5-0036: AXP20x variant AXP806 found 7077 [ 1.326358] random: fast init done 7078 [ 1.337543] axp20x-i2c 5-0036: AXP20X driver loaded 7079 [ 1.338038] media: Linux media interface: v0.10 7080 [ 1.338149] Linux video capture interface: v2.00 7081 [ 1.341644] Advanced Linux Sound Architecture Driver Initialized. 7082 [ 1.342376] Bluetooth: Core ver 2.22 7083 [ 1.342475] NET: Registered protocol family 31 7084 [ 1.342481] Bluetooth: HCI device and connection manager initialized 7085 [ 1.342497] Bluetooth: HCI socket layer initialized 7086 [ 1.342510] Bluetooth: L2CAP socket layer initialized 7087 [ 1.342549] Bluetooth: SCO socket layer initialized 7088 [ 1.343348] [DISP]disp_module_init 7089 [ 1.344556] [DISP] parser_disp_init_para,line:1403: 7090 [ 1.344565] of_property_read fb0_width fail 7091 [ 1.344577] [DISP] disp_init,line:2215: 7092 [ 1.344583] smooth display screen:0 type:4 mode:10 7093 [ 1.361858] [DISP]disp_module_init finish 7094 [ 1.362779] clocksource: Switched to clocksource arch_sys_counter 7095 [ 1.363033] VFS: Disk quotas dquot_6.6.0 7096 [ 1.363120] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 7097 [ 1.363882] Console: switching to colour frame buffer device 240x67 7098 [ 1.407227] NET: Registered protocol family 2 7099 [ 1.407354] IP idents hash table entries: 16384 (order: 5, 131072 bytes) 7100 [ 1.426377] TCP established hash table entries: 8192 (order: 4, 65536 bytes) 7101 [ 1.426450] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) 7102 [ 1.426572] TCP: Hash tables configured (established 8192 bind 8192) 7103 [ 1.426659] UDP hash table entries: 512 (order: 2, 16384 bytes) 7104 [ 1.426686] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) 7105 [ 1.427011] NET: Registered protocol family 1 7106 [ 1.427623] RPC: Registered named UNIX socket transport module. 7107 [ 1.427628] RPC: Registered udp transport module. 7108 [ 1.427631] RPC: Registered tcp transport module. 7109 [ 1.427634] RPC: Registered tcp NFSv4.1 backchannel transport module. 7110 [ 1.427904] Trying to unpack rootfs image as initramfs... 7111 [ 2.181948] Freeing initrd memory: 17256K 7112 [ 2.183090] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available 7113 [ 2.186984] audit: initializing netlink subsys (disabled) 7114 [ 2.187040] audit: type=2000 audit(2.183:1): initialized 7115 [ 2.187965] workingset: timestamp_bits=45 max_order=18 bucket_order=0 7116 [ 2.199123] DLM installed 7117 [ 2.200975] squashfs: version 4.0 (2009/01/31) Phillip Lougher 7118 [ 2.201311] Registering sdcardfs 0.1 7119 [ 2.201792] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 7120 [ 2.203342] ntfs: driver 2.1.32 [Flags: R/W]. 7121 [ 2.209765] NET: Registered protocol family 38 7122 [ 2.210131] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) 7123 [ 2.210270] io scheduler noop registered 7124 [ 2.210278] io scheduler deadline registered 7125 [ 2.210443] io scheduler cfq registered (default) 7126 [ 2.212267] failed to get easy_light_used assign 7127 [ 2.212277] failed to get normal led pin assign 7128 [ 2.212283] failed to get standby led pin assign 7129 [ 2.212288] failed to get standby led pin assign 7130 [ 2.212293] these is zero number for gpio 7131 [ 2.212298] gpio_init finish with uesd 7132 [ 2.215523] uart uart0: get regulator failed 7133 [ 2.215723] uart0: ttyS0 at MMIO 0x5000000 (irq = 280, base_baud = 1500000) is a SUNXI 7134 [ 2.215746] sw_console_setup()1706 - console setup baud 115200 parity n bits 8, flow n 7135 [ 2.215842] console [ttyS0] enabled 7136 [ 2.216722] uart uart1: get regulator failed 7137 [ 2.216914] uart1: ttyS1 at MMIO 0x5000400 (irq = 281, base_baud = 1500000) is a SUNXI 7138 [ 2.217636] uart uart5: get regulator failed 7139 [ 2.217824] uart5: ttyS5 at MMIO 0x5001400 (irq = 282, base_baud = 1500000) is a SUNXI 7140 [ 2.219118] misc dump reg init 7141 [ 2.220682] deinterlace 1420000.deinterlace: version[1.0.0], ip=0x300100 7142 [ 2.221027] Unable to detect cache hierarchy for CPU 0 7143 [ 2.235199] brd: module loaded 7144 [ 2.243362] loop: module loaded 7145 [ 2.243551] [NAND][NE] Not found valid nand node on dts 7146 [ 2.244133] Get boot type cmd line fail 7147 [ 2.244717] sunxi-bt soc@03000000:bt: Missing bt_power. 7148 [ 2.244727] sunxi-bt soc@03000000:bt: bt_power_name ((null)) 7149 [ 2.244735] sunxi-bt soc@03000000:bt: Missing bt_io_regulator. 7150 [ 2.244741] sunxi-bt soc@03000000:bt: io_regulator_name ((null)) 7151 [ 2.244798] sunxi-bt soc@03000000:bt: bt_rst gpio=211 mul-sel=1 pull=-1 drv_level=-1 data=0 7152 [ 2.244869] sunxi-bt soc@03000000:bt: devm_pinctrl_get() failed! 7153 [ 2.245712] sunxi-wlan soc@03000000:wlan: wlan_busnum (1) 7154 [ 2.245723] sunxi-wlan soc@03000000:wlan: Missing wlan_power. 7155 [ 2.245730] sunxi-wlan soc@03000000:wlan: wlan_power_name ((null)) 7156 [ 2.245737] sunxi-wlan soc@03000000:wlan: Missing wlan_io_regulator. 7157 [ 2.245744] sunxi-wlan soc@03000000:wlan: io_regulator_name ((null)) 7158 [ 2.245774] sunxi-wlan soc@03000000:wlan: wlan_regon gpio=210 mul-sel=1 pull=-1 drv_level=-1 data=0 7159 [ 2.245806] sunxi-wlan soc@03000000:wlan: get gpio chip_en failed 7160 [ 2.245814] sunxi-wlan soc@03000000:wlan: get gpio power_en failed 7161 [ 2.245831] sunxi-wlan soc@03000000:wlan: wlan_hostwake gpio=207 mul-sel=6 pull=-1 drv_level=-1 data=0 7162 [ 2.246834] [ADDR_MGT] addr_mgt_probe: success. 7163 [ 2.253317] tun: Universal TUN/TAP device driver, 1.6 7164 [ 2.253327] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 7165 [ 2.255320] gmac-power0: NULL 7166 [ 2.255329] gmac-power1: NULL 7167 [ 2.255335] gmac-power2: NULL 7168 [ 2.256289] PPP generic driver version 2.4.2 7169 [ 2.256610] PPP BSD Compression module registered 7170 [ 2.256620] PPP Deflate Compression module registered 7171 [ 2.256652] PPP MPPE Compression module registered 7172 [ 2.256661] NET: Registered protocol family 24 7173 [ 2.256695] PPTP driver version 0.8.5 7174 [ 2.257063] usbcore: registered new interface driver r8152 7175 [ 2.257140] usbcore: registered new interface driver asix 7176 [ 2.257232] usbcore: registered new interface driver ax88179_178a 7177 [ 2.257297] usbcore: registered new interface driver cdc_ether 7178 [ 2.257357] usbcore: registered new interface driver net1080 7179 [ 2.257416] usbcore: registered new interface driver cdc_subset 7180 [ 2.257474] usbcore: registered new interface driver zaurus 7181 [ 2.257574] usbcore: registered new interface driver cdc_ncm 7182 [ 2.257581] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 7183 [ 2.257942] get drv_vbus is fail, 84 7184 [ 2.257950] get ehci0-controller, regulator_io is no nocare 7185 [ 2.258212] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffff800992ac30, 0x:ffffff80081c1000, irq_no:11e 7186 [ 2.258218] [sunxi-ehci0]: Not init ehci0 7187 [ 2.258335] get ehci1-controller, regulator_io is no nocare 7188 [ 2.258519] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xffffff800992a8e8, 0x:ffffff80081c5000, irq_no:120 7189 [ 2.258578] sunxi-ehci 5200000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 7190 [ 2.258604] sunxi-ehci 5200000.ehci1-controller: new USB bus registered, assigned bus number 1 7191 [ 2.259184] sunxi-ehci 5200000.ehci1-controller: irq 288, io mem 0xffffff80081c5000 7192 [ 2.269475] sunxi-ehci 5200000.ehci1-controller: USB 0.0 started, EHCI 1.00 7193 [ 2.269763] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 7194 [ 2.269772] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 7195 [ 2.269780] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 7196 [ 2.269787] usb usb1: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 7197 [ 2.269794] usb usb1: SerialNumber: sunxi-ehci 7198 [ 2.270655] hub 1-0:1.0: USB hub found 7199 [ 2.270701] hub 1-0:1.0: 1 port detected 7200 [ 2.271370] get drv_vbus is fail, 84 7201 [ 2.271379] get ehci2-controller, regulator_io is no nocare 7202 [ 2.271622] [sunxi-ehci2]: probe, pdev->name: 5310000.ehci2-controller, sunxi_ehci: 0xffffff800992a5a0, 0x:ffffff80081cf000, irq_no:122 7203 [ 2.271682] sunxi-ehci 5310000.ehci2-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 7204 [ 2.271707] sunxi-ehci 5310000.ehci2-controller: new USB bus registered, assigned bus number 2 7205 [ 2.271982] sunxi-ehci 5310000.ehci2-controller: irq 290, io mem 0xffffff80081cf000 7206 [ 2.282810] sunxi-ehci 5310000.ehci2-controller: USB 0.0 started, EHCI 1.00 7207 [ 2.283024] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 7208 [ 2.283033] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 7209 [ 2.283040] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 7210 [ 2.283048] usb usb2: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 7211 [ 2.283054] usb usb2: SerialNumber: sunxi-ehci 7212 [ 2.283925] hub 2-0:1.0: USB hub found 7213 [ 2.283969] hub 2-0:1.0: 1 port detected 7214 [ 2.284638] get drv_vbus is fail, 84 7215 [ 2.284646] get ehci3-controller, regulator_io is no nocare 7216 [ 2.284893] [sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffff800992a258, 0x:ffffff80081d9000, irq_no:124 7217 [ 2.284944] sunxi-ehci 5311000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 7218 [ 2.284969] sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 3 7219 [ 2.285283] sunxi-ehci 5311000.ehci3-controller: irq 292, io mem 0xffffff80081d9000 7220 [ 2.296127] sunxi-ehci 5311000.ehci3-controller: USB 0.0 started, EHCI 1.00 7221 [ 2.296319] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 7222 [ 2.296328] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 7223 [ 2.296336] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 7224 [ 2.296343] usb usb3: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 7225 [ 2.296350] usb usb3: SerialNumber: sunxi-ehci 7226 [ 2.297209] hub 3-0:1.0: USB hub found 7227 [ 2.297254] hub 3-0:1.0: 1 port detected 7228 [ 2.298190] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 7229 [ 2.298560] get drv_vbus is fail, 84 7230 [ 2.298568] get ohci0-controller, regulator_io is no nocare 7231 [ 2.298901] [sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffff800992b950 7232 [ 2.298906] [sunxi-ohci0]: Not init ohci0 7233 [ 2.299023] get ohci1-controller, regulator_io is no nocare 7234 [ 2.299189] hci: request ohci1-controller gpio:80 7235 [ 2.299268] [sunxi-ohci1]: probe, pdev->name: 5200000.ohci1-controller, sunxi_ohci: 0xffffff800992b608 7236 [ 2.299319] sunxi-ohci 5200000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 7237 [ 2.299345] sunxi-ohci 5200000.ohci1-controller: new USB bus registered, assigned bus number 4 7238 [ 2.299423] sunxi-ohci 5200000.ohci1-controller: irq 289, io mem 0x00000000 7239 [ 2.360295] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 7240 [ 2.360306] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 7241 [ 2.360313] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 7242 [ 2.360321] usb usb4: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 7243 [ 2.360328] usb usb4: SerialNumber: sunxi-ohci 7244 [ 2.361205] hub 4-0:1.0: USB hub found 7245 [ 2.361252] hub 4-0:1.0: 1 port detected 7246 [ 2.361920] get drv_vbus is fail, 84 7247 [ 2.361928] get ohci2-controller, regulator_io is no nocare 7248 [ 2.362257] [sunxi-ohci2]: probe, pdev->name: 5310000.ohci2-controller, sunxi_ohci: 0xffffff800992b2c0 7249 [ 2.362308] sunxi-ohci 5310000.ohci2-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 7250 [ 2.362335] sunxi-ohci 5310000.ohci2-controller: new USB bus registered, assigned bus number 5 7251 [ 2.362419] sunxi-ohci 5310000.ohci2-controller: irq 291, io mem 0x00000000 7252 [ 2.420292] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 7253 [ 2.420302] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 7254 [ 2.420310] usb usb5: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 7255 [ 2.420317] usb usb5: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 7256 [ 2.420324] usb usb5: SerialNumber: sunxi-ohci 7257 [ 2.421182] hub 5-0:1.0: USB hub found 7258 [ 2.421226] hub 5-0:1.0: 1 port detected 7259 [ 2.421906] get drv_vbus is fail, 84 7260 [ 2.421914] get ohci3-controller, regulator_io is no nocare 7261 [ 2.422239] [sunxi-ohci3]: probe, pdev->name: 5311000.ohci3-controller, sunxi_ohci: 0xffffff800992af78 7262 [ 2.422288] sunxi-ohci 5311000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 7263 [ 2.422313] sunxi-ohci 5311000.ohci3-controller: new USB bus registered, assigned bus number 6 7264 [ 2.422392] sunxi-ohci 5311000.ohci3-controller: irq 293, io mem 0x00000000 7265 [ 2.480310] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 7266 [ 2.480320] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 7267 [ 2.480328] usb usb6: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 7268 [ 2.480335] usb usb6: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 7269 [ 2.480342] usb usb6: SerialNumber: sunxi-ohci 7270 [ 2.481176] hub 6-0:1.0: USB hub found 7271 [ 2.481227] hub 6-0:1.0: 1 port detected 7272 [ 2.482149] ohci-platform: OHCI generic platform driver 7273 [ 2.482889] usbcore: registered new interface driver uas 7274 [ 2.483057] usbcore: registered new interface driver usb-storage 7275 [ 2.483145] usbcore: registered new interface driver ums-alauda 7276 [ 2.483221] usbcore: registered new interface driver ums-cypress 7277 [ 2.483291] usbcore: registered new interface driver ums-datafab 7278 [ 2.483370] usbcore: registered new interface driver ums_eneub6250 7279 [ 2.483440] usbcore: registered new interface driver ums-freecom 7280 [ 2.483511] usbcore: registered new interface driver ums-isd200 7281 [ 2.483579] usbcore: registered new interface driver ums-jumpshot 7282 [ 2.483648] usbcore: registered new interface driver ums-karma 7283 [ 2.483717] usbcore: registered new interface driver ums-onetouch 7284 [ 2.483809] usbcore: registered new interface driver ums-realtek 7285 [ 2.483893] usbcore: registered new interface driver ums-sddr09 7286 [ 2.483964] usbcore: registered new interface driver ums-sddr55 7287 [ 2.484034] usbcore: registered new interface driver ums-usbat 7288 [ 2.484183] usb_serial_number:20080411 7289 [ 2.485425] input: sunxi-keyboard as /devices/virtual/input/input0 7290 [ 2.486025] usbcore: registered new interface driver xpad 7291 [ 2.486169] usbcore: registered new interface driver usb_acecad 7292 [ 2.486264] usbcore: registered new interface driver aiptek 7293 [ 2.486343] usbcore: registered new interface driver gtco 7294 [ 2.486422] usbcore: registered new interface driver hanwang 7295 [ 2.486501] usbcore: registered new interface driver kbtab 7296 [ 2.486984] axp2101_pek: axp2101-pek can not register without irq 7297 [ 2.487007] axp2101-pek: probe of axp2101-pek.0 failed with error -22 7298 [ 2.488438] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0 7299 [ 2.488502] sunxi-rtc rtc: RTC enabled 7300 [ 2.489001] i2c /dev entries driver 7301 [ 2.489834] lirc_dev: IR Remote Control driver registered, major 244 7302 [ 2.489847] IR NEC protocol handler initialized 7303 [ 2.489853] IR RC5(x/sz) protocol handler initialized 7304 [ 2.489859] IR RC6 protocol handler initialized 7305 [ 2.489865] IR JVC protocol handler initialized 7306 [ 2.489870] IR Sony protocol handler initialized 7307 [ 2.489876] IR SANYO protocol handler initialized 7308 [ 2.489882] IR Sharp protocol handler initialized 7309 [ 2.489888] IR MCE Keyboard/mouse protocol handler initialized 7310 [ 2.489893] IR LIRC bridge handler initialized 7311 [ 2.489898] IR XMP protocol handler initialized 7312 [ 2.490427] sunxi_ir_startup: get ir protocol failed 7313 [ 2.490471] 7040000.s_cir supply ir0 not found, using dummy regulator 7314 [ 2.490653] Registered IR keymap rc_map_sunxi 7315 [ 2.491052] input: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0/input1 7316 [ 2.491306] rc rc0: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0 7317 [ 2.492317] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input2 7318 [ 2.492953] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-rc-recv) registered at minor = 0 7319 [ 2.493657] sunxi cedar version 0.1 7320 [ 2.493847] VE: install start!!! 7321 7322 [ 2.494037] cedar_ve: cedar-ve the get irq is 278 7323 [ 2.494672] VE: get debugfs_mpp_root is NULL, please check mpp 7324 7325 [ 2.494685] VE: sunxi ve debug register driver failed! 7326 7327 [ 2.497872] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) 7328 [ 2.499171] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com 7329 [ 2.499531] Bluetooth: HCI UART driver ver 2.3 7330 [ 2.499542] Bluetooth: HCI UART protocol H4 registered 7331 [ 2.499547] Bluetooth: HCI UART protocol LL registered 7332 [ 2.499554] Bluetooth: HCI UART protocol Three-wire (H5) registered 7333 [ 2.503735] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 7334 [ 2.503751] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 7335 [ 2.503764] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 7336 [ 2.503776] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 7337 [ 2.503788] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 7338 [ 2.503800] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 7339 [ 2.504220] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 7340 [ 2.504336] sunxi-mmc sdc0: ***ctl-spec-caps*** 8 7341 [ 2.504533] sunxi-mmc sdc0: No vmmc regulator found 7342 [ 2.504540] sunxi-mmc sdc0: No vqmmc regulator found 7343 [ 2.504546] sunxi-mmc sdc0: No vdmmc regulator found 7344 [ 2.504552] sunxi-mmc sdc0: No vd33sw regulator found 7345 [ 2.504559] sunxi-mmc sdc0: No vd18sw regulator found 7346 [ 2.504565] sunxi-mmc sdc0: No vq33sw regulator found 7347 [ 2.504571] sunxi-mmc sdc0: No vq18sw regulator found 7348 [ 2.505287] sunxi-mmc sdc0: set host busy 7349 [ 2.505383] sunxi-mmc sdc0: Got CD GPIO 7350 [ 2.505768] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 7351 [ 2.505807] sunxi-mmc sdc0: no vqmmc,Check if there is regulator 7352 [ 2.519473] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7353 [ 2.536426] sunxi-mmc sdc0: detmode:gpio irq 7354 [ 2.536459] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7355 [ 2.538963] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7356 [ 2.540325] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 7357 [ 2.540461] sunxi-mmc sdc1: ***ctl-spec-caps*** 8 7358 [ 2.540604] sunxi-mmc sdc1: No vmmc regulator found 7359 [ 2.540611] sunxi-mmc sdc1: No vqmmc regulator found 7360 [ 2.540617] sunxi-mmc sdc1: No vdmmc regulator found 7361 [ 2.540624] sunxi-mmc sdc1: No vd33sw regulator found 7362 [ 2.540630] sunxi-mmc sdc1: No vd18sw regulator found 7363 [ 2.540636] sunxi-mmc sdc1: No vq33sw regulator found 7364 [ 2.540642] sunxi-mmc sdc1: No vq18sw regulator found 7365 [ 2.541246] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7366 [ 2.542509] sunxi-mmc sdc1: set host busy 7367 [ 2.542591] mmc:failed to get gpios 7368 [ 2.543734] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7369 [ 2.545000] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 7370 [ 2.559526] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7371 [ 2.567486] mmc0: host does not support reading read-only switch, assuming write-enable 7372 [ 2.569393] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 7373 [ 2.569483] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 7374 [ 2.569629] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B 7375 [ 2.569719] mmc0: new high speed SDXC card at address 0001 7376 [ 2.574095] mmcblk0: mmc0:0001 SD16G 59.5 GiB 7377 [ 2.575723] mmcblk0: p1 7378 [ 2.576275] sunxi-mmc sdc1: detmode:manually by software 7379 [ 2.577158] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 7380 [ 2.578572] ledtrig-cpu: registered to indicate activity on CPUs 7381 [ 2.579300] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 7382 [ 2.579336] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7383 [ 2.581911] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7384 [ 2.583839] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 7385 [ 2.584675] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 7386 [ 2.585510] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 7387 [ 2.586345] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 7388 [ 2.586391] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B 7389 [ 2.586772] sunxi_emce_hw_init()368Unable to get pclk, return fffffffe 7390 [ 2.586778] sunxi_emce_probe()590emce hw init failed! 7391 [ 2.586804] emce: probe of emce failed with error -2 7392 [ 2.587070] hidraw: raw HID events driver (C) Jiri Kosina 7393 [ 2.590537] usbcore: registered new interface driver usbhid 7394 [ 2.590545] usbhid: USB HID core driver 7395 [ 2.591815] optee: probing for conduit method from DT. 7396 [ 2.591827] optee: api uid mismatch 7397 [ 2.592469] usbcore: registered new interface driver snd-usb-audio 7398 [ 2.594847] [sunxi_hdmi_codec_init] driver and deivce register finished. 7399 [ 2.597097] [sunxi_internal_codec_probe]:get audio avcc failed 7400 [ 2.597135] [sunxi_internal_codec_probe]:get audio vcc3v3-audio failed 7401 [ 2.597359] lineout_vol:26, linein_gain:3, fmin_gain:3, digital_vol:0, adcdrc_cfg:0, adchpf_cfg:0, dacdrc_cfg:0, dachpf_cfg:0, ramp_func_used:1, pa_msleep_time:100, pa_ctl_level:1, gpio-spk:0 7402 [ 2.599957] sunxi-codec-machine sndcodec: sun50iw9-codec <-> cpudai mapping ok 7403 [ 2.601928] sndhdmi sndhdmi: ASoC: CPU DAI (null) not registered 7404 [ 2.601941] sndhdmi sndhdmi: snd_soc_register_card() failed: -517 7405 [ 2.604379] sunxi-ahub-cpudai 5097000.cpudai3-controller: ahub cpudai id invalid 7406 [ 2.604404] sunxi-ahub-cpudai: probe of 5097000.cpudai3-controller failed with error -22 7407 [ 2.608337] sndahub sndahub: sunxi-ahub-aif1 <-> 5097000.cpudai0-controller mapping ok 7408 [ 2.609749] sndahub sndahub: sunxi-ahub-aif2 <-> 5097000.cpudai1-controller mapping ok 7409 [ 2.611618] sndahub sndahub: sunxi-ahub-aif3 <-> 5097000.cpudai2-controller mapping ok 7410 [ 2.614757] pktgen: Packet Generator for packet performance testing. Version: 2.75 7411 [ 2.615204] u32 classifier 7412 [ 2.615211] Actions configured 7413 [ 2.615223] Netfilter messages via NETLINK v0.30. 7414 [ 2.615251] nfnl_acct: registering with nfnetlink. 7415 [ 2.615593] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) 7416 [ 2.615842] ctnetlink v0.93: registering with nfnetlink. 7417 [ 2.616662] xt_time: kernel timezone is -0000 7418 [ 2.616686] IPVS: Registered protocols (TCP, UDP) 7419 [ 2.616790] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) 7420 [ 2.616915] IPVS: Creating netns size=1928 id=0 7421 [ 2.617048] IPVS: ipvs loaded. 7422 [ 2.617056] IPVS: [rr] scheduler registered. 7423 [ 2.617156] ipip: IPv4 and MPLS over IPv4 tunneling driver 7424 [ 2.617859] gre: GRE over IPv4 demultiplexor driver 7425 [ 2.617869] ip_gre: GRE over IPv4 tunneling driver 7426 [ 2.619142] IPv4 over IPsec tunneling driver 7427 [ 2.620078] ip_tables: (C) 2000-2006 Netfilter Core Team 7428 [ 2.620360] arp_tables: arp_tables: (C) 2002 David S. Miller 7429 [ 2.620428] Initializing XFRM netlink socket 7430 [ 2.620461] IPsec XFRM device driver 7431 [ 2.621305] NET: Registered protocol family 10 7432 [ 2.623214] mip6: Mobile IPv6 7433 [ 2.623253] ip6_tables: (C) 2000-2006 Netfilter Core Team 7434 [ 2.624571] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver 7435 [ 2.626483] NET: Registered protocol family 17 7436 [ 2.626533] NET: Registered protocol family 15 7437 [ 2.626696] Bridge firewalling registered 7438 [ 2.626857] Bluetooth: RFCOMM TTY layer initialized 7439 [ 2.626878] Bluetooth: RFCOMM socket layer initialized 7440 [ 2.626915] Bluetooth: RFCOMM ver 1.11 7441 [ 2.626930] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 7442 [ 2.626936] Bluetooth: BNEP filters: protocol multicast 7443 [ 2.626950] Bluetooth: BNEP socket layer initialized 7444 [ 2.626955] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 7445 [ 2.626967] Bluetooth: HIDP socket layer initialized 7446 [ 2.627052] l2tp_core: L2TP core driver, V2.0 7447 [ 2.627068] l2tp_ppp: PPPoL2TP kernel driver, V2.0 7448 [ 2.627074] 8021q: 802.1Q VLAN Support v1.8 7449 [ 2.627278] sctp: Hash tables configured (bind 256/256) 7450 [ 2.627866] Key type dns_resolver registered 7451 [ 2.628005] Registered cp15_barrier emulation handler 7452 [ 2.628017] Registered setend emulation handler 7453 [ 2.628922] registered taskstats version 1 7454 [ 2.640553] zswap: default zpool zbud not available 7455 [ 2.640561] zswap: pool creation failed 7456 [ 2.643425] Btrfs loaded, crc32c=crc32c-arm64-hw 7457 [ 2.644174] HDMI 2.0 driver init start! 7458 [ 2.644189] boot_hdmi=true 7459 [ 2.645058] Can not find the node of esm 7460 [ 2.645079] ERROR: pinctrl_get for HDMI2.0 DDC fail 7461 [ 2.645170] Get hdmi_power0:vcc-hdmi 7462 [ 2.645210] 6000000.hdmi supply vcc-hdmi not found, using dummy regulator 7463 [ 2.645401] Get hdmi_power1:vdd-hdmi 7464 [ 2.645425] 6000000.hdmi supply vdd-hdmi not found, using dummy regulator 7465 [ 2.647008] hdmi_cec_init 7466 [ 2.647509] [DISP] disp_device_attached,line:146: 7467 [ 2.647519] attached ok, mgr0<-->device0, type=4 7468 [ 2.647529] [HDMI receive params]: tv mode: 0xa format:0x0 data bits:0x0 eotf:0x0 cs:0x0 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8 7469 [ 2.647541] [DISP] disp_hdmi_set_mode,line:648: 7470 [ 2.647546] hdmi_set_mode is null! 7471 [ 2.649787] HDMI2.0 module init end 7472 [ 2.660885] sunxi-thermal 5070400.thermal_sensor: avcc is not calibrated 7473 [ 2.664523] cpu cpu1: opp_list_debug_create_link: Failed to create link 7474 [ 2.664535] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12) 7475 [ 2.664568] cpu cpu2: opp_list_debug_create_link: Failed to create link 7476 [ 2.664575] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12) 7477 [ 2.664605] cpu cpu3: opp_list_debug_create_link: Failed to create link 7478 [ 2.664613] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12) 7479 [ 2.666916] sndhdmi sndhdmi: audiohdmi-dai <-> sunxi-ahub-cpu-aif1 mapping ok 7480 [ 2.667820] get det_vbus is fail, 84 7481 [ 2.667827] get id is fail, 84 7482 [ 2.668300] sunxi-rtc rtc: setting system clock to 2023-09-25 18:18:46 UTC (1695665926) 7483 [ 2.672091] ALSA device list: 7484 [ 2.672099] #0: audiocodec 7485 [ 2.672103] #1: sndahub 7486 [ 2.672106] #2: sndhdmi 7487 [ 2.673747] Freeing unused kernel memory: 3008K 7488 [ 2.718922] random: systemd-udevd: uninitialized urandom read (16 bytes read) 7489 [ 2.721056] random: systemd-udevd: uninitialized urandom read (16 bytes read) 7490 [ 2.724330] random: systemd-udevd: uninitialized urandom read (16 bytes read) 7491 [ 2.796516] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device connect 7492 [ 2.959558] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device disconnect 7493 [ 3.052820] HDMI cable is connected 7494 [ 3.309468] usb 4-1: new full-speed USB device number 2 using sunxi-ohci 7495 [ 3.529904] usb 4-1: New USB device found, idVendor=24ae, idProduct=2013 7496 [ 3.529914] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 7497 [ 3.529919] usb 4-1: Product: Rapoo 2.4G Wireless Device 7498 [ 3.529924] usb 4-1: Manufacturer: RAPOO 7499 [ 3.537841] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.0/0003:24AE:2013.0001/input/input3 7500 [ 3.538427] hid-generic 0003:24AE:2013.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input0 7501 [ 3.544586] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.1/0003:24AE:2013.0002/input/input4 7502 [ 3.600307] hid-generic 0003:24AE:2013.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input1 7503 [ 3.604165] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.2/0003:24AE:2013.0003/input/input5 7504 [ 3.661441] hid-generic 0003:24AE:2013.0003: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input2 7505 [ 4.240626] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) 7506 [ 5.145795] cgroup: cgroup2: unknown option "nsdelegate,memory_recursiveprot" 7507 [ 5.146414] cgroup: cgroup2: unknown option "nsdelegate" 7508 [ 5.166417] systemd[1]: systemd 252.12-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) 7509 [ 5.166442] systemd[1]: Detected architecture arm64. 7510 [ 5.167573] systemd[1]: Warning! Reported kernel version 4.9.318-legacy-sun50iw9 is older than systemd's required baseline kernel version 4.15. Your mileage may vary. 7511 [ 5.177663] systemd[1]: Hostname set to <opi>. 7512 [ 5.204773] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation 7513 [ 6.811857] (sd-execut[1456]: /usr/lib/systemd/system-generators/netplan failed with exit status 1. 7514 [ 6.829498] 7515 insmod_device_driver 7516 7517 [ 6.829774] device_chose finished 124! 7518 [ 7.179240] systemd[1]: /lib/systemd/system/hdmi-audio.service:10: Support for option SysVStartPriority= has been removed and it is ignored 7519 [ 7.418750] systemd[1]: Queued start job for default target graphical.target. 7520 [ 7.426080] systemd[1]: Created slice system-getty.slice - Slice /system/getty. 7521 [ 7.428409] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. 7522 [ 7.430737] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. 7523 [ 7.432003] systemd[1]: Created slice user.slice - User and Session Slice. 7524 [ 7.432654] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. 7525 [ 7.433310] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 7526 [ 7.433681] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. 7527 [ 7.434215] systemd[1]: Reached target slices.target - Slice Units. 7528 [ 7.434632] systemd[1]: Reached target swap.target - Swaps. 7529 [ 7.434911] systemd[1]: Reached target time-set.target - System Time Set. 7530 [ 7.435401] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. 7531 [ 7.452861] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket. 7532 [ 7.453967] systemd[1]: Listening on syslog.socket - Syslog Socket. 7533 [ 7.454906] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. 7534 [ 7.455555] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. 7535 [ 7.457208] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. 7536 [ 7.458156] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). 7537 [ 7.459235] systemd[1]: Listening on systemd-journald.socket - Journal Socket. 7538 [ 7.461469] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. 7539 [ 7.462357] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. 7540 [ 7.466421] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... 7541 [ 7.471032] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... 7542 [ 7.475978] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... 7543 [ 7.477424] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 7544 [ 7.478405] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). 7545 [ 7.486045] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... 7546 [ 7.491690] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... 7547 [ 7.497469] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... 7548 [ 7.506003] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... 7549 [ 7.515590] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 7550 [ 7.527791] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... 7551 [ 7.535173] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 7552 [ 7.543132] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... 7553 [ 7.551053] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 7554 [ 7.552604] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). 7555 [ 7.562751] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... 7556 [ 7.569321] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... 7557 [ 7.574418] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... 7558 [ 7.584799] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. 7559 [ 7.587299] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. 7560 [ 7.589247] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. 7561 [ 7.592005] fuse init (API version 7.26) 7562 [ 7.593312] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. 7563 [ 7.599112] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. 7564 [ 7.603263] systemd[1]: modprobe@configfs.service: Deactivated successfully. 7565 [ 7.603890] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. 7566 [ 7.608223] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 7567 [ 7.644815] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro 7568 [ 7.656743] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 7569 [ 7.662023] systemd[1]: modprobe@drm.service: Deactivated successfully. 7570 [ 7.662567] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. 7571 [ 7.664769] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 7572 [ 7.665330] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 7573 [ 7.667531] systemd[1]: modprobe@fuse.service: Deactivated successfully. 7574 [ 7.668055] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. 7575 [ 7.670976] systemd[1]: modprobe@loop.service: Deactivated successfully. 7576 [ 7.675122] fbtft: module is from the staging directory, the quality is unknown, you have been warned. 7577 [ 7.683286] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned. 7578 [ 7.684222] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 7579 [ 7.684232] spidev spi1.1: dh2228fv spi1.1 16777kHz 8 bits mode=0x00 7580 [ 7.684421] spidev spi1.1: Deleting spi1.1 7581 [ 7.685390] fbtft_device: GPIOS used by 'fb_st7735r': 7582 [ 7.685397] fbtft_device: 'reset' = GPIO73 7583 [ 7.685401] fbtft_device: 'dc' = GPIO70 7584 [ 7.685412] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 7585 [ 7.685418] spi spi1.1: fb_st7735r spi1.1 16000kHz 8 bits mode=0x00 7586 [ 7.696780] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 7587 [ 7.722550] WCN: marlin_init entry! 7588 [ 7.723788] WCN: marlin_parse_dt reset gpio=211 7589 [ 7.723799] WCN_ERR: gpio reset request err: 211 7590 [ 7.723804] WCN: wcn config bt wake host 7591 [ 7.724317] WCN: marlin_registsr_bt_wake bt_hostwake gpio=208 mul-sel=6 pull=-1 drv_level=-1 data=0 intnum=193 7592 [ 7.724446] WCN: wcn config wifi wake host 7593 [ 7.724465] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 7594 [ 7.728152] sdiohal:sdiohal_init ok 7595 [ 7.729058] WCN: marlin_probe ok! 7596 [ 7.737855] mtty_probe init device addr: 0xffffffc0095b6e00 7597 [ 7.738035] -->rfkill_bluetooth_init 7598 [ 7.738242] <--rfkill_bluetooth_init 7599 [ 7.750168] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. 7600 [ 7.758288] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... 7601 [ 7.764967] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... 7602 [ 7.765975] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 7603 [ 7.782030] WCN: start_marlin [MARLIN_WIFI] 7604 [ 7.782044] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 7605 [ 7.782048] WCN: the first power on start 7606 [ 7.791125] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... 7607 [ 7.791851] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 7608 [ 7.798448] systemd[1]: Starting systemd-sysusers.service - Create System Users... 7609 [ 7.804260] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. 7610 [ 7.807510] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. 7611 [ 7.825607] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. 7612 [ 7.884017] systemd[1]: Finished systemd-sysusers.service - Create System Users. 7613 [ 7.890545] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... 7614 [ 7.896198] WCN: marlin chip en pull up 7615 [ 7.922933] sdiohal:sdiohal_scan_card 7616 [ 7.922967] sunxi-wlan soc@03000000:wlan: bus_index: 1 7617 [ 7.923018] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 7618 [ 7.939528] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7619 [ 7.960381] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 7620 [ 7.961290] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 7621 [ 7.961331] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7622 [ 7.963903] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7623 [ 7.967016] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7624 [ 7.982832] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 7625 [ 7.989419] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. 7626 [ 7.991496] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. 7627 [ 7.993907] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B 7628 [ 7.994700] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 7629 [ 7.994798] sunxi-mmc sdc1: sdc set ios:clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 7630 [ 7.995529] mmc1: new ultra high speed SDR104 SDIO card at address 8800 7631 [ 7.996246] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=150000000 7632 [ 7.996461] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 7633 [ 7.996490] WCN: marlin_scan_finish! 7634 [ 7.996494] sdiohal:probe ok 7635 [ 7.996505] sdiohal:scan end! 7636 [ 7.996511] WCN: then marlin start to download 7637 [ 7.996551] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! 7638 [ 7.997527] systemd[1]: Mounting tmp.mount - /tmp... 7639 [ 8.033608] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... 7640 [ 8.038411] systemd[1]: Mounted tmp.mount - /tmp. 7641 [ 8.041135] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices. 7642 [ 8.043567] systemd[1]: Reached target local-fs.target - Local File Systems. 7643 [ 8.048513] systemd[1]: Starting armbian-led-state.service - Armbian leds state... 7644 [ 8.053562] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config... 7645 [ 8.087280] systemd[1]: Starting console-setup.service - Set console font and keymap... 7646 [ 8.102521] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown... 7647 [ 8.112421] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data... 7648 [ 8.130433] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 7649 [ 8.133574] WCN: combin_img 0 marlin_firmware_write finish and successful 7650 [ 8.133756] WCN: marlin_start_run read reset reg val:0x1 7651 [ 8.133760] WCN: after do marlin_start_run reset reg val:0x0 7652 [ 8.133966] WCN: s_marlin_bootup_time=8133959468 7653 [ 8.138879] systemd[1]: Starting systemd-udev-settle.service - Wait for udev To Complete Device Initialization... 7654 [ 8.139807] WCN: clock mode: TSX 7655 [ 8.140084] WCN: marlin_write_cali_data sync init_state:0x1a0f50 7656 [ 8.147303] systemd[1]: Starting ufw.service - Uncomplicated firewall... 7657 [ 8.151926] systemd[1]: Finished console-setup.service - Set console font and keymap. 7658 [ 8.164753] systemd[1]: Finished ifupdown-pre.service - Helper to synchronize boot up for ifupdown. 7659 [ 8.167222] WCN: marlin_write_cali_data sync init_state:0x1a0f50 7660 [ 8.182202] systemd[1]: Received SIGRTMIN+20 from PID 1419 (plymouthd). 7661 [ 8.193224] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1 7662 [ 8.193235] WCN: sdio_config bt_wake_host trigger:[high] 7663 [ 8.193239] WCN: sdio_config irq:[inband] 7664 [ 8.193244] WCN: sdio_config wl_wake_host trigger:[high] 7665 [ 8.193249] WCN: sdio_config wake_host_level_duration_time:[20ms] 7666 [ 8.193252] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse] 7667 [ 8.193256] WCN: marlin_send_sdio_config_to_cp sdio_config:0xb8f01 (enable config) 7668 [ 8.193618] WCN: marlin_write_cali_data finish 7669 [ 8.193804] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 7670 [ 8.210627] systemd[1]: Finished ufw.service - Uncomplicated firewall. 7671 [ 8.217819] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data. 7672 [ 8.219776] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 7673 [ 8.222579] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 7674 [ 8.223377] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 7675 [ 8.224142] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 7676 [ 8.227534] systemd[1]: Reached target network-pre.target - Preparation for Network. 7677 [ 8.246350] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 7678 [ 8.270355] systemd[1]: Finished armbian-led-state.service - Armbian leds state. 7679 [ 8.273053] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 7680 [ 8.299706] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 7681 [ 8.327502] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0 7682 [ 8.327514] WCN: marlin_bind_verify confuse data: 0x2e197f4f5a117df30c640a9405a3d69 7683 [ 8.327533] WCN: marlin_bind_verify verify data: 0x16d6ab91e1d71b3ae4604f224021aa 7684 [ 8.328066] WCN: check_cp_ready sync val:0xf0f0f0f7, prj_type val:0x0 7685 [ 8.353173] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0 7686 [ 8.353181] sdiohal:sdiohal_runtime_get entry 7687 [ 8.353343] WCN: get_cp2_version entry! 7688 [ 8.354857] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~ 7689 [ 8.354887] WCN: switch_cp2_log - close entry! 7690 [ 8.356169] WCN: WCND at cmd read:OK 7691 [ 8.356226] WCN: then marlin download finished and run ok 7692 [ 8.356231] WCN: start_loopcheck 7693 [ 8.374295] WCN: get_board_ant_num [one_ant] 7694 [ 8.374308] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini 7695 [ 8.436980] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings. 7696 [ 8.441339] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. 7697 [ 8.449680] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... 7698 [ 8.520727] zram: Added device: zram0 7699 [ 8.521818] zram: Added device: zram1 7700 [ 8.522652] zram: Added device: zram2 7701 [ 8.547016] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. 7702 [ 8.556837] systemd[1]: Starting networking.service - Raise network interfaces... 7703 [ 8.560976] zswap: can't enable, initialization failed 7704 [ 8.593041] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files. 7705 [ 8.612058] systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen... 7706 [ 8.622557] zram0: detected capacity change from 0 to 506396672 7707 [ 8.689130] fb_st7735r: module is from the staging directory, the quality is unknown, you have been warned. 7708 [ 8.695579] systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen. 7709 [ 8.697665] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 7710 [ 8.698424] systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch. 7711 [ 8.698850] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. 7712 [ 9.164249] systemd[1]: Finished networking.service - Raise network interfaces. 7713 [ 9.885868] graphics fb1: fb_st7735r frame buffer, 160x128, 40 KiB video memory, 4 KiB buffer memory, fps=20, spi1.1 at 16 MHz 7714 [ 9.949826] systemd[1]: Found device dev-ttyS0.device - /dev/ttyS0. 7715 [ 10.196492] systemd[1]: Reached target usb-gadget.target - Hardware activated USB gadget. 7716 [ 10.835602] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 7717 [ 10.835936] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 7718 [ 10.837595] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch. 7719 [ 10.838464] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 7720 [ 10.858823] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 7721 [ 10.892384] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 7722 [ 10.902749] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 7723 [ 10.912628] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 7724 [ 10.919820] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 7725 [ 10.927187] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 7726 [ 10.936512] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 7727 [ 10.938331] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 7728 [ 10.941050] systemd[1]: modprobe@loop.service: Deactivated successfully. 7729 [ 10.941884] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 7730 [ 10.954859] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 7731 [ 10.955133] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 7732 [ 11.014423] systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status... 7733 [ 11.017667] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 7734 [ 11.018461] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 7735 [ 11.020090] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 7736 [ 11.054368] sunxi-bt soc@03000000:bt: set block: 0 7737 [ 11.068226] bluetooth_set_power: start_block=0 7738 [ 11.068238] WCN: start_marlin [MARLIN_BLUETOOTH] 7739 [ 11.068249] WCN: marlin power state:4, subsys: [MARLIN_BLUETOOTH] power 1 7740 [ 11.068253] WCN: marlin have open, GNSS is closed 7741 [ 11.068258] bluetooth_set_power: end_block=0 7742 [ 11.082041] systemd[1]: Started systemd-rfkill.service - Load/Save RF Kill Switch Status. 7743 [ 11.101996] systemd[1]: Finished systemd-udev-settle.service - Wait for udev To Complete Device Initialization. 7744 [ 11.107741] systemd[1]: Starting brltty.service - Braille Device Support... 7745 [ 11.665490] Adding 494524k swap on /dev/zram0. Priority:5 extents:1 across:494524k SSFS 7746 [ 11.811684] zram1: detected capacity change from 0 to 52428800 7747 [ 11.867311] systemd[1]: Started brltty.service - Braille Device Support. 7748 [ 11.887015] input: BRLTTY 6.5 Linux Screen Driver Keyboard as /devices/virtual/input/input6 7749 [ 15.912948] systemd[1]: Finished armbian-zram-config.service - Armbian ZRAM config. 7750 [ 15.918761] systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging... 7751 [ 15.980222] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard 7752 [ 16.099167] systemd[1]: systemd-rfkill.service: Deactivated successfully. 7753 [ 19.866397] systemd[1]: Finished armbian-ramlog.service - Armbian memory supported logging. 7754 [ 19.872691] systemd[1]: Starting systemd-journald.service - Journal Service... 7755 [ 20.143398] systemd-journald[1921]: Data hash table of /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal has a fill level at 75.2 (1658 of 2204 items, 1269760 file size, 765 bytes per hash table item), suggesting rotation. 7756 [ 20.143420] systemd-journald[1921]: /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal: Journal header limits reached or header out-of-date, rotating. 7757 [ 20.150867] systemd[1]: Started systemd-journald.service - Journal Service. 7758 [ 20.197915] systemd-journald[1921]: Received client request to flush runtime journal. 7759 [ 20.271279] systemd-journald[1921]: Data hash table of /var/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal has a fill level at 77.0 (3505 of 4551 items, 2621440 file size, 747 bytes per hash table item), suggesting rotation. 7760 [ 20.271303] systemd-journald[1921]: /var/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal: Journal header limits reached or header out-of-date, rotating. 7761 [ 20.676205] IPVS: Creating netns size=1928 id=1 7762 7763 ### armbian-release: 7764 7765 # PLEASE DO NOT EDIT THIS FILE 7766 BOARD=orangepizero2 7767 BOARD_NAME="Orange Pi Zero2" 7768 BOARDFAMILY=sun50iw9 7769 BUILD_REPOSITORY_URL=https://github.com/armbian/build 7770 BUILD_REPOSITORY_COMMIT=ac829eb6 7771 LINUXFAMILY=sun50iw9 7772 ARCH=arm64 7773 IMAGE_TYPE=stable 7774 BOARD_TYPE=conf 7775 INITRD_ARCH=arm 7776 KERNEL_IMAGE_TYPE=Image 7777 FORCE_BOOTSCRIPT_UPDATE=yes 7778 VENDOR=Armbian 7779 BOOTSCRIPT_FORCE_UPDATE="yes" 7780 BOOTSCRIPT_DST="boot.cmd" 7781 VERSION=23.8.1 7782 REVISION=23.8.1 7783 BRANCH=legacy 7784 7785 ### boot environment: 7786 7787 verbosity=1 7788 console=serial 7789 #disp_mode=1080p60 7790 #fb0_width=1280 7791 #fb0_height=720 7792 rootdev=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e 7793 rootfstype=ext4 7794 overlays=spi-spidev 7795 param_spidev_spi_bus=1 7796 param_spidev_spi_cs=1 7797 extraargs=fbcon=map:1 7798 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u 7799 7800 ### lsusb: 7801 7802 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 7803 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 7804 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 7805 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 7806 Bus 004 Device 002: ID 24ae:2013 Shenzhen Rapoo Technology Co., Ltd. Rapoo 2.4G Wireless Device 7807 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 7808 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 7809 7810 ### lscpu: 7811 7812 Architecture: aarch64 7813 CPU op-mode(s): 32-bit, 64-bit 7814 Byte Order: Little Endian 7815 CPU(s): 4 7816 On-line CPU(s) list: 0-3 7817 Vendor ID: ARM 7818 Model name: Cortex-A53 7819 Model: 4 7820 Thread(s) per core: 1 7821 Core(s) per cluster: 4 7822 Socket(s): - 7823 Cluster(s): 1 7824 Stepping: r0p4 7825 CPU(s) scaling MHz: 100% 7826 CPU max MHz: 1512.0000 7827 CPU min MHz: 480.0000 7828 BogoMIPS: 48.00 7829 Flags: fp asimd aes pmull sha1 sha2 crc32 7830 7831 ### cpuinfo: 7832 7833 processor : 0 7834 BogoMIPS : 48.00 7835 Features : fp asimd aes pmull sha1 sha2 crc32 7836 CPU implementer : 0x41 7837 CPU architecture: 8 7838 CPU variant : 0x0 7839 CPU part : 0xd03 7840 CPU revision : 4 7841 7842 processor : 1 7843 BogoMIPS : 48.00 7844 Features : fp asimd aes pmull sha1 sha2 crc32 7845 CPU implementer : 0x41 7846 CPU architecture: 8 7847 CPU variant : 0x0 7848 CPU part : 0xd03 7849 CPU revision : 4 7850 7851 processor : 2 7852 BogoMIPS : 48.00 7853 Features : fp asimd aes pmull sha1 sha2 crc32 7854 CPU implementer : 0x41 7855 CPU architecture: 8 7856 CPU variant : 0x0 7857 CPU part : 0xd03 7858 CPU revision : 4 7859 7860 processor : 3 7861 BogoMIPS : 48.00 7862 Features : fp asimd aes pmull sha1 sha2 crc32 7863 CPU implementer : 0x41 7864 CPU architecture: 8 7865 CPU variant : 0x0 7866 CPU part : 0xd03 7867 CPU revision : 4 7868 7869 7870 ### meminfo: 7871 7872 MemTotal: 989056 kB 7873 MemFree: 791132 kB 7874 MemAvailable: 886204 kB 7875 Buffers: 15672 kB 7876 Cached: 86408 kB 7877 SwapCached: 0 kB 7878 Active: 66432 kB 7879 Inactive: 56804 kB 7880 Active(anon): 21348 kB 7881 Inactive(anon): 632 kB 7882 Active(file): 45084 kB 7883 Inactive(file): 56172 kB 7884 Unevictable: 0 kB 7885 Mlocked: 0 kB 7886 SwapTotal: 494524 kB 7887 SwapFree: 494524 kB 7888 Dirty: 10092 kB 7889 Writeback: 0 kB 7890 AnonPages: 21068 kB 7891 Mapped: 24172 kB 7892 Shmem: 808 kB 7893 Slab: 33212 kB 7894 SReclaimable: 9276 kB 7895 SUnreclaim: 23936 kB 7896 KernelStack: 2544 kB 7897 PageTables: 1056 kB 7898 NFS_Unstable: 0 kB 7899 Bounce: 0 kB 7900 WritebackTmp: 0 kB 7901 CommitLimit: 989052 kB 7902 Committed_AS: 79860 kB 7903 VmallocTotal: 263061440 kB 7904 VmallocUsed: 0 kB 7905 VmallocChunk: 0 kB 7906 CmaTotal: 16384 kB 7907 CmaFree: 7468 kB 7908 HugePages_Total: 0 7909 HugePages_Free: 0 7910 HugePages_Rsvd: 0 7911 HugePages_Surp: 0 7912 Hugepagesize: 2048 kB 7913 7914 ### virtual memory: 7915 7916 vm.admin_reserve_kbytes = 8192 7917 vm.block_dump = 0 7918 vm.compact_unevictable_allowed = 1 7919 vm.dirty_background_bytes = 0 7920 vm.dirty_background_ratio = 10 7921 vm.dirty_bytes = 0 7922 vm.dirty_expire_centisecs = 3000 7923 vm.dirty_ratio = 20 7924 vm.dirtytime_expire_seconds = 43200 7925 vm.dirty_writeback_centisecs = 500 7926 vm.extfrag_threshold = 500 7927 vm.extra_free_kbytes = 0 7928 vm.hugepages_treat_as_movable = 0 7929 vm.hugetlb_shm_group = 0 7930 vm.laptop_mode = 0 7931 vm.legacy_va_layout = 0 7932 vm.lowmem_reserve_ratio = 256 32 7933 vm.max_map_count = 65530 7934 vm.min_free_kbytes = 3937 7935 vm.mmap_min_addr = 4096 7936 vm.mmap_rnd_bits = 18 7937 vm.mmap_rnd_compat_bits = 11 7938 vm.nr_hugepages = 0 7939 vm.nr_overcommit_hugepages = 0 7940 vm.nr_pdflush_threads = 0 7941 vm.oom_dump_tasks = 1 7942 vm.oom_kill_allocating_task = 0 7943 vm.overcommit_kbytes = 0 7944 vm.overcommit_memory = 0 7945 vm.overcommit_ratio = 50 7946 vm.page-cluster = 0 7947 vm.panic_on_oom = 0 7948 vm.percpu_pagelist_fraction = 0 7949 vm.stat_interval = 1 7950 vm.swappiness = 100 7951 vm.user_reserve_kbytes = 29994 7952 vm.vfs_cache_pressure = 100 7953 vm.watermark_scale_factor = 10 7954 7955 ### ip addr: 7956 7957 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 7958 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 7959 inet XXX.XXX.0.1/8 scope host lo 7960 valid_lft forever preferred_lft forever 7961 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 7962 link/ether a2:f9:75:52:ad:58 brd ff:ff:ff:ff:ff:ff 7963 3: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 7964 link/ether fa:6e:f4:da:68:8c brd ff:ff:ff:ff:ff:ff 7965 4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 7966 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 7967 5: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN group default qlen 1 7968 link/gre XXX.XXX.0.0 brd XXX.XXX.0.0 7969 6: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN group default qlen 1000 7970 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 7971 7: ip_vti0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 7972 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 7973 8: ip6_vti0@NONE: <NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1 7974 link/tunnel6 :: brd :: 7975 9: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 7976 link/sit XXX.XXX.0.0 brd XXX.XXX.0.0 7977 10: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN group default qlen 1 7978 link/tunnel6 :: brd :: 7979 11: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 7980 link/ether 48:c9:27:84:d1:40 brd ff:ff:ff:ff:ff:ff 7981 7982 ### partitions: 7983 7984 major minor #blocks name 7985 7986 179 0 62410752 mmcblk0 7987 179 1 61763584 mmcblk0p1 7988 253 0 494528 zram0 7989 253 1 51200 zram1 7990 7991 ### df: 7992 7993 udev 466M 0 466M 0% /dev 7994 tmpfs 97M 2.1M 95M 3% /run 7995 /dev/mmcblk0p1 58G 7.3G 51G 13% / 7996 tmpfs 483M 0 483M 0% /dev/shm 7997 tmpfs 5.0M 0 5.0M 0% /run/lock 7998 tmpfs 483M 4.0K 483M 1% /tmp 7999 /dev/zram1 47M 9.8M 34M 23% /var/log 8000 8001 ### lsblk: 8002 8003 NAME FSTYPE SIZE MOUNTPOINT UUID 8004 mmcblk0 59.5G 8005 └─mmcblk0p1 ext4 58.9G / 0c85f38a-a16e-49a0-a53c-99d9856e983e 8006 zram1 50M /var/log 8007 zram2 0B 8008 8009 ### zramctl: 8010 8011 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT 8012 /dev/zram1 lz4 50M 9.8M 2.6M 3.1M 4 /var/log 8013 /dev/zram0 lzo 482.9M 4K 76B 12K 4 [SWAP] 8014 8015 ### mtab: 8016 8017 /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 8018 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 8019 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 8020 8021 ### mmc0:0001 info: 8022 8023 manfid: 0x0000fe 8024 cid: fe3432534431364720000000690091f5 8025 fwrev: 0x0 8026 csd: 400e00325b590001dc277f800a40008b 8027 ocr: 0x00200000 8028 type: SD 8029 date: 01/2009 8030 hwrev: 0x2 8031 dsr: 0x404 8032 serial: 0x00000069 8033 erase_size: 512 8034 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SD16G MODALIAS=mmc:block 8035 ssr: 000000000800000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 8036 scr: 0285808300000000 8037 oemid: 0x3432 8038 preferred_erase_size: 4194304 8039 name: SD16G 8040 8041 ### Boot system health: 8042 8043 Time CPU load %cpu %sys %usr %nice %io %irq Tcpu C.St. 8044 15:19:07 1512 MHz 1.10 39% 19% 13% 0% 6% 0% 52.2 °C 0/5 8045 15:19:07 1512 MHz 1.10 95% 31% 45% 1% 17% 0% 49.6 °C 0/5 8046 15:19:07 1512 MHz 1.10 99% 29% 48% 0% 20% 0% 49.6 °C 0/5 8047 15:19:08 1512 MHz 1.10 99% 38% 52% 0% 7% 0% 51.7 °C 0/5 8048 15:19:08 1512 MHz 1.10 98% 28% 63% 0% 5% 0% 51.7 °C 0/5 8049 8050 ### Activated 1 lzo zram swap devices with 482MB each. 8051 ### Activated Armbian ramlog partition with lz4 compression 8052 8053 Mon Sep 25 03:30:19 PM -03 2023 | Orange Pi Zero2 | 23.8.1 | arm64 | aarch64 | 4.9.318-legacy-sun50iw9 8054 8055 ### dmesg: 8056 8057 [ 0.000000] Booting Linux on physical CPU 0x0 8058 [ 0.000000] Linux version 4.9.318-legacy-sun50iw9 (armbian@next) (gcc version 11.4.0 (Ubuntu 11.4.0-1ubuntu1~22.04) ) #1 SMP PREEMPT Tue May 17 02:06:13 UTC 2022 8059 [ 0.000000] Boot CPU: AArch64 Processor [410fd034] 8060 [ 0.000000] disp reserve base 0x7bf4fcc0 ,size 0x384000 8061 [ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000 8062 [ 0.000000] On node 0 totalpages: 262144 8063 [ 0.000000] DMA zone: 4096 pages used for memmap 8064 [ 0.000000] DMA zone: 0 pages reserved 8065 [ 0.000000] DMA zone: 262144 pages, LIFO batch:31 8066 [ 0.000000] psci: probing for conduit method from DT. 8067 [ 0.000000] psci: PSCIv1.0 detected in firmware. 8068 [ 0.000000] psci: Using standard PSCI v0.2 function IDs 8069 [ 0.000000] psci: Trusted OS migration not required 8070 [ 0.000000] psci: SMC Calling Convention v1.0 8071 [ 0.000000] percpu: Embedded 21 pages/cpu s45592 r8192 d32232 u86016 8072 [ 0.000000] pcpu-alloc: s45592 r8192 d32232 u86016 alloc=21*4096 8073 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 8074 [ 0.000000] Detected VIPT I-cache on CPU0 8075 [ 0.000000] CPU features: enabling workaround for ARM erratum 845719 8076 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258048 8077 [ 0.000000] Kernel command line: root=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e rootwait rootfstype=ext4 splash=verbose console=ttyS0,115200 consoleblank=0 loglevel=1 ubootpart=68ea14b7-01 disp_reserve=3686400,0x7bf4fcc0 fbcon=map:1 8078 [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes 8079 [ 0.000000] log_buf_len total cpu_extra contributions: 393216 bytes 8080 [ 0.000000] log_buf_len min size: 131072 bytes 8081 [ 0.000000] log_buf_len: 524288 bytes 8082 [ 0.000000] early log buf free: 129352(98%) 8083 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) 8084 [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) 8085 [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) 8086 [ 0.000000] Memory: 952408K/1048576K available (11902K kernel code, 1476K rwdata, 6668K rodata, 3008K init, 674K bss, 79784K reserved, 16384K cma-reserved) 8087 [ 0.000000] Virtual kernel memory layout: 8088 [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB) 8089 [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB) 8090 [ 0.000000] .text : 0xffffff8008208000 - 0xffffff8008da8000 ( 11904 KB) 8091 [ 0.000000] .rodata : 0xffffff8008da8000 - 0xffffff8009438000 ( 6720 KB) 8092 [ 0.000000] .init : 0xffffff8009438000 - 0xffffff8009728000 ( 3008 KB) 8093 [ 0.000000] .data : 0xffffff8009728000 - 0xffffff8009899008 ( 1477 KB) 8094 [ 0.000000] .bss : 0xffffff8009899008 - 0xffffff8009941b94 ( 675 KB) 8095 [ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB) 8096 [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB) 8097 [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum) 8098 [ 0.000000] 0xffffffbf00000000 - 0xffffffbf01000000 ( 16 MB actual) 8099 [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB) 8100 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 8101 [ 0.000000] Preemptible hierarchical RCU implementation. 8102 [ 0.000000] Build-time adjustment of leaf fanout to 64. 8103 [ 0.000000] NR_IRQS:64 nr_irqs:64 0 8104 [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns 8105 [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt). 8106 [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns 8107 [ 0.000004] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns 8108 [ 0.000226] Console: colour dummy device 80x25 8109 [ 0.000240] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000) 8110 [ 0.000250] pid_max: default: 32768 minimum: 301 8111 [ 0.000445] Security Framework initialized 8112 [ 0.000453] AppArmor: AppArmor disabled by boot time parameter 8113 [ 0.000570] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes) 8114 [ 0.000576] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes) 8115 [ 0.001838] sched-energy: CPU device node has no sched-energy-costs 8116 [ 0.001854] Invalid sched_group_energy for CPU0 8117 [ 0.001861] CPU0: update cpu_capacity 1024 8118 [ 0.008972] ASID allocator initialised with 32768 entries 8119 [ 0.027949] BOOTEVENT: 27.933623: ON 8120 [ 0.055922] Detected VIPT I-cache on CPU1 8121 [ 0.055976] Invalid sched_group_energy for CPU1 8122 [ 0.055979] CPU1: update cpu_capacity 1024 8123 [ 0.055982] CPU1: Booted secondary processor [410fd034] 8124 [ 0.079312] Detected VIPT I-cache on CPU2 8125 [ 0.079350] Invalid sched_group_energy for CPU2 8126 [ 0.079353] CPU2: update cpu_capacity 1024 8127 [ 0.079356] CPU2: Booted secondary processor [410fd034] 8128 [ 0.102713] Detected VIPT I-cache on CPU3 8129 [ 0.102748] Invalid sched_group_energy for CPU3 8130 [ 0.102752] CPU3: update cpu_capacity 1024 8131 [ 0.102754] CPU3: Booted secondary processor [410fd034] 8132 [ 0.102833] Brought up 4 CPUs 8133 [ 0.102841] SMP: Total of 4 processors activated. 8134 [ 0.102849] CPU features: detected feature: 32-bit EL0 Support 8135 [ 0.102855] CPU features: detected feature: Kernel page table isolation (KPTI) 8136 [ 0.106620] CPU: All CPU(s) started at EL1 8137 [ 0.106643] alternatives: patching kernel code 8138 [ 0.106819] Invalid sched_group_energy for CPU3 8139 [ 0.106829] CPU3: update max cpu_capacity 1024 8140 [ 0.106834] Invalid sched_group_energy for Cluster3 8141 [ 0.106839] Invalid sched_group_energy for CPU2 8142 [ 0.106845] Invalid sched_group_energy for Cluster2 8143 [ 0.106849] Invalid sched_group_energy for CPU1 8144 [ 0.106855] Invalid sched_group_energy for Cluster1 8145 [ 0.106860] Invalid sched_group_energy for CPU0 8146 [ 0.106865] Invalid sched_group_energy for Cluster0 8147 [ 0.108291] devtmpfs: initialized 8148 [ 0.112724] CPU1: update max cpu_capacity 1024 8149 [ 0.143412] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns 8150 [ 0.143433] futex hash table entries: 1024 (order: 5, 131072 bytes) 8151 [ 0.144092] xor: measuring software checksum speed 8152 [ 0.176256] 8regs : 1933.200 MB/sec 8153 [ 0.209635] 8regs_prefetch: 1720.800 MB/sec 8154 [ 0.243021] 32regs : 2287.200 MB/sec 8155 [ 0.276408] 32regs_prefetch: 1935.600 MB/sec 8156 [ 0.276414] xor: using function: 32regs (2287.200 MB/sec) 8157 [ 0.276474] atomic64_test: passed 8158 [ 0.276480] pinctrl core: initialized pinctrl subsystem 8159 [ 0.277654] NET: Registered protocol family 16 8160 [ 0.278809] dump_class_init,861, success 8161 [ 0.296468] cpuidle: using governor menu 8162 [ 0.297898] sunxi iommu: irq = 8 8163 [ 0.298211] vdso: 2 pages (1 code @ ffffff8008daf000, 1 data @ ffffff800972c000) 8164 [ 0.298228] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. 8165 [ 0.299630] DMA: preallocated 256 KiB pool for atomic allocations 8166 [ 0.301010] sun50iw9p1-r-pinctrl r_pio: initialized sunXi PIO driver 8167 [ 0.315366] sun50iw9p1-pinctrl pio: initialized sunXi PIO driver 8168 [ 0.319287] iommu: Adding device 1c0e000.ve to group 0 8169 [ 0.319799] iommu: Adding device 1c00000.vp9 to group 0 8170 [ 0.331254] iommu: Adding device 1000000.disp to group 0 8171 [ 0.332671] iommu: Adding device 1480000.g2d to group 0 8172 [ 0.335875] iommu: Adding device csi0 to group 0 8173 [ 0.336335] iommu: Adding device csi1 to group 0 8174 [ 0.337567] iommu: Adding device 6600800.vind:scaler@0 to group 0 8175 [ 0.337861] iommu: Adding device 6600800.vind:scaler@1 to group 0 8176 [ 0.338173] iommu: Adding device 6600800.vind:scaler@2 to group 0 8177 [ 0.338459] iommu: Adding device 6600800.vind:scaler@3 to group 0 8178 [ 0.338742] iommu: Adding device 6600800.vind:scaler@4 to group 0 8179 [ 0.339026] iommu: Adding device 6600800.vind:scaler@5 to group 0 8180 [ 0.339983] iommu: Adding device vinc0 to group 0 8181 [ 0.340544] iommu: Adding device vinc1 to group 0 8182 [ 0.341998] iommu: Adding device 1420000.deinterlace to group 0 8183 [ 0.391224] HugeTLB registered 2 MB page size, pre-allocated 0 pages 8184 [ 0.447338] raid6: int64x1 gen() 391 MB/s 8185 [ 0.504125] raid6: int64x1 xor() 363 MB/s 8186 [ 0.560790] raid6: int64x2 gen() 590 MB/s 8187 [ 0.617590] raid6: int64x2 xor() 512 MB/s 8188 [ 0.674310] raid6: int64x4 gen() 840 MB/s 8189 [ 0.731025] raid6: int64x4 xor() 628 MB/s 8190 [ 0.787767] raid6: int64x8 gen() 964 MB/s 8191 [ 0.844540] raid6: int64x8 xor() 655 MB/s 8192 [ 0.901328] raid6: neonx1 gen() 648 MB/s 8193 [ 0.958023] raid6: neonx1 xor() 641 MB/s 8194 [ 1.014746] raid6: neonx2 gen() 975 MB/s 8195 [ 1.071510] raid6: neonx2 xor() 819 MB/s 8196 [ 1.128240] raid6: neonx4 gen() 1286 MB/s 8197 [ 1.184979] raid6: neonx4 xor() 965 MB/s 8198 [ 1.241748] raid6: neonx8 gen() 1323 MB/s 8199 [ 1.298459] raid6: neonx8 xor() 991 MB/s 8200 [ 1.298465] raid6: using algorithm neonx8 gen() 1323 MB/s 8201 [ 1.298470] raid6: .... xor() 991 MB/s, rmw enabled 8202 [ 1.298475] raid6: using intx1 recovery algorithm 8203 [ 1.298647] pwm module init! 8204 [ 1.302976] sunxi-pm debug v3.10 8205 [ 1.304067] SCSI subsystem initialized 8206 [ 1.304687] sunxi_spi_probe()2299 - [spi0] SPI MASTER MODE 8207 [ 1.304772] sunxi_spi_request_gpio()1927 - [spi0] Pinctrl init spi0 8208 [ 1.304889] sunxi_spi_clk_init()1977 - [spi0] mclk 100000000 8209 [ 1.305384] spi spi0: master is unqueued, this is deprecated 8210 [ 1.305695] sunxi_spi_probe()2379 - [spi0]: driver probe succeed, base ffffff8008066000, irq 294 8211 [ 1.306284] sunxi_spi_probe()2299 - [spi1] SPI MASTER MODE 8212 [ 1.306365] sunxi_spi_request_gpio()1927 - [spi1] Pinctrl init spi1 8213 [ 1.306483] sunxi_spi_clk_init()1977 - [spi1] mclk 100000000 8214 [ 1.306950] spi spi1: master is unqueued, this is deprecated 8215 [ 1.307263] sunxi_spi_probe()2379 - [spi1]: driver probe succeed, base ffffff8008068000, irq 295 8216 [ 1.308058] usbcore: registered new interface driver usbfs 8217 [ 1.308143] usbcore: registered new interface driver hub 8218 [ 1.308221] usbcore: registered new device driver usb 8219 [ 1.308375] sunxi_i2c_adap_init()2522 - init 8220 [ 1.308951] sunxi_i2c_probe()2208 - [i2c3] warning: failed to get regulator id 8221 [ 1.309047] sunxi_i2c_probe()2270 - [i2c3] twi_drv_used = 0 8222 [ 1.309054] sunxi_i2c_probe()2274 - [i2c3] twi_pkt_interval = 0 8223 [ 1.309070] twi3 supply twi not found, using dummy regulator 8224 [ 1.309146] twi_request_gpio()451 - [i2c3] init name: twi3 8225 [ 1.309915] sunxi_i2c_probe()2208 - [i2c5] warning: failed to get regulator id 8226 [ 1.309994] sunxi_i2c_probe()2270 - [i2c5] twi_drv_used = 0 8227 [ 1.310001] sunxi_i2c_probe()2274 - [i2c5] twi_pkt_interval = 0 8228 [ 1.310015] twi5 supply twi not found, using dummy regulator 8229 [ 1.310090] twi_request_gpio()451 - [i2c5] init name: twi5 8230 [ 1.310571] axp20x-i2c 5-0036: AXP20x variant AXP806 found 8231 [ 1.329304] random: fast init done 8232 [ 1.340490] axp20x-i2c 5-0036: AXP20X driver loaded 8233 [ 1.340973] media: Linux media interface: v0.10 8234 [ 1.341049] Linux video capture interface: v2.00 8235 [ 1.341908] Advanced Linux Sound Architecture Driver Initialized. 8236 [ 1.342633] Bluetooth: Core ver 2.22 8237 [ 1.342705] NET: Registered protocol family 31 8238 [ 1.342711] Bluetooth: HCI device and connection manager initialized 8239 [ 1.342727] Bluetooth: HCI socket layer initialized 8240 [ 1.342739] Bluetooth: L2CAP socket layer initialized 8241 [ 1.342777] Bluetooth: SCO socket layer initialized 8242 [ 1.343552] [DISP]disp_module_init 8243 [ 1.344766] [DISP] parser_disp_init_para,line:1403: 8244 [ 1.344776] of_property_read fb0_width fail 8245 [ 1.344788] [DISP] disp_init,line:2215: 8246 [ 1.344794] smooth display screen:0 type:4 mode:10 8247 [ 1.362118] [DISP]disp_module_init finish 8248 [ 1.362980] clocksource: Switched to clocksource arch_sys_counter 8249 [ 1.363241] VFS: Disk quotas dquot_6.6.0 8250 [ 1.363330] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 8251 [ 1.364068] Console: switching to colour frame buffer device 240x67 8252 [ 1.407307] NET: Registered protocol family 2 8253 [ 1.407432] IP idents hash table entries: 16384 (order: 5, 131072 bytes) 8254 [ 1.419902] TCP established hash table entries: 8192 (order: 4, 65536 bytes) 8255 [ 1.419977] TCP bind hash table entries: 8192 (order: 5, 131072 bytes) 8256 [ 1.420100] TCP: Hash tables configured (established 8192 bind 8192) 8257 [ 1.420192] UDP hash table entries: 512 (order: 2, 16384 bytes) 8258 [ 1.420220] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) 8259 [ 1.420538] NET: Registered protocol family 1 8260 [ 1.421159] RPC: Registered named UNIX socket transport module. 8261 [ 1.421164] RPC: Registered udp transport module. 8262 [ 1.421167] RPC: Registered tcp transport module. 8263 [ 1.421170] RPC: Registered tcp NFSv4.1 backchannel transport module. 8264 [ 1.421447] Trying to unpack rootfs image as initramfs... 8265 [ 2.175632] Freeing initrd memory: 17256K 8266 [ 2.176730] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available 8267 [ 2.180610] audit: initializing netlink subsys (disabled) 8268 [ 2.180669] audit: type=2000 audit(2.176:1): initialized 8269 [ 2.181586] workingset: timestamp_bits=45 max_order=18 bucket_order=0 8270 [ 2.192665] DLM installed 8271 [ 2.194509] squashfs: version 4.0 (2009/01/31) Phillip Lougher 8272 [ 2.194846] Registering sdcardfs 0.1 8273 [ 2.195314] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). 8274 [ 2.196852] ntfs: driver 2.1.32 [Flags: R/W]. 8275 [ 2.203364] NET: Registered protocol family 38 8276 [ 2.203725] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) 8277 [ 2.203867] io scheduler noop registered 8278 [ 2.203874] io scheduler deadline registered 8279 [ 2.204034] io scheduler cfq registered (default) 8280 [ 2.205837] failed to get easy_light_used assign 8281 [ 2.205848] failed to get normal led pin assign 8282 [ 2.205854] failed to get standby led pin assign 8283 [ 2.205858] failed to get standby led pin assign 8284 [ 2.205864] these is zero number for gpio 8285 [ 2.205868] gpio_init finish with uesd 8286 [ 2.209224] uart uart0: get regulator failed 8287 [ 2.209419] uart0: ttyS0 at MMIO 0x5000000 (irq = 280, base_baud = 1500000) is a SUNXI 8288 [ 2.209441] sw_console_setup()1706 - console setup baud 115200 parity n bits 8, flow n 8289 [ 2.209530] console [ttyS0] enabled 8290 [ 2.210376] uart uart1: get regulator failed 8291 [ 2.210568] uart1: ttyS1 at MMIO 0x5000400 (irq = 281, base_baud = 1500000) is a SUNXI 8292 [ 2.211256] uart uart5: get regulator failed 8293 [ 2.211441] uart5: ttyS5 at MMIO 0x5001400 (irq = 282, base_baud = 1500000) is a SUNXI 8294 [ 2.212650] misc dump reg init 8295 [ 2.214153] deinterlace 1420000.deinterlace: version[1.0.0], ip=0x300100 8296 [ 2.214492] Unable to detect cache hierarchy for CPU 0 8297 [ 2.228621] brd: module loaded 8298 [ 2.236971] loop: module loaded 8299 [ 2.237161] [NAND][NE] Not found valid nand node on dts 8300 [ 2.237751] Get boot type cmd line fail 8301 [ 2.238358] sunxi-bt soc@03000000:bt: Missing bt_power. 8302 [ 2.238368] sunxi-bt soc@03000000:bt: bt_power_name ((null)) 8303 [ 2.238376] sunxi-bt soc@03000000:bt: Missing bt_io_regulator. 8304 [ 2.238383] sunxi-bt soc@03000000:bt: io_regulator_name ((null)) 8305 [ 2.238438] sunxi-bt soc@03000000:bt: bt_rst gpio=211 mul-sel=1 pull=-1 drv_level=-1 data=0 8306 [ 2.238509] sunxi-bt soc@03000000:bt: devm_pinctrl_get() failed! 8307 [ 2.239340] sunxi-wlan soc@03000000:wlan: wlan_busnum (1) 8308 [ 2.239351] sunxi-wlan soc@03000000:wlan: Missing wlan_power. 8309 [ 2.239358] sunxi-wlan soc@03000000:wlan: wlan_power_name ((null)) 8310 [ 2.239365] sunxi-wlan soc@03000000:wlan: Missing wlan_io_regulator. 8311 [ 2.239372] sunxi-wlan soc@03000000:wlan: io_regulator_name ((null)) 8312 [ 2.239400] sunxi-wlan soc@03000000:wlan: wlan_regon gpio=210 mul-sel=1 pull=-1 drv_level=-1 data=0 8313 [ 2.239433] sunxi-wlan soc@03000000:wlan: get gpio chip_en failed 8314 [ 2.239441] sunxi-wlan soc@03000000:wlan: get gpio power_en failed 8315 [ 2.239459] sunxi-wlan soc@03000000:wlan: wlan_hostwake gpio=207 mul-sel=6 pull=-1 drv_level=-1 data=0 8316 [ 2.240488] [ADDR_MGT] addr_mgt_probe: success. 8317 [ 2.247040] tun: Universal TUN/TAP device driver, 1.6 8318 [ 2.247049] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> 8319 [ 2.249068] gmac-power0: NULL 8320 [ 2.249077] gmac-power1: NULL 8321 [ 2.249083] gmac-power2: NULL 8322 [ 2.250067] PPP generic driver version 2.4.2 8323 [ 2.250358] PPP BSD Compression module registered 8324 [ 2.250367] PPP Deflate Compression module registered 8325 [ 2.250393] PPP MPPE Compression module registered 8326 [ 2.250401] NET: Registered protocol family 24 8327 [ 2.250436] PPTP driver version 0.8.5 8328 [ 2.250796] usbcore: registered new interface driver r8152 8329 [ 2.250879] usbcore: registered new interface driver asix 8330 [ 2.250978] usbcore: registered new interface driver ax88179_178a 8331 [ 2.251047] usbcore: registered new interface driver cdc_ether 8332 [ 2.251115] usbcore: registered new interface driver net1080 8333 [ 2.251177] usbcore: registered new interface driver cdc_subset 8334 [ 2.251244] usbcore: registered new interface driver zaurus 8335 [ 2.251332] usbcore: registered new interface driver cdc_ncm 8336 [ 2.251338] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 8337 [ 2.251694] get drv_vbus is fail, 84 8338 [ 2.251702] get ehci0-controller, regulator_io is no nocare 8339 [ 2.251972] [sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffff800992ac30, 0x:ffffff80081c1000, irq_no:11e 8340 [ 2.251978] [sunxi-ehci0]: Not init ehci0 8341 [ 2.252100] get ehci1-controller, regulator_io is no nocare 8342 [ 2.252283] [sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xffffff800992a8e8, 0x:ffffff80081c5000, irq_no:120 8343 [ 2.252343] sunxi-ehci 5200000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 8344 [ 2.252369] sunxi-ehci 5200000.ehci1-controller: new USB bus registered, assigned bus number 1 8345 [ 2.252940] sunxi-ehci 5200000.ehci1-controller: irq 288, io mem 0xffffff80081c5000 8346 [ 2.266333] sunxi-ehci 5200000.ehci1-controller: USB 0.0 started, EHCI 1.00 8347 [ 2.266621] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 8348 [ 2.266630] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 8349 [ 2.266638] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 8350 [ 2.266645] usb usb1: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 8351 [ 2.266652] usb usb1: SerialNumber: sunxi-ehci 8352 [ 2.267517] hub 1-0:1.0: USB hub found 8353 [ 2.267564] hub 1-0:1.0: 1 port detected 8354 [ 2.268248] get drv_vbus is fail, 84 8355 [ 2.268255] get ehci2-controller, regulator_io is no nocare 8356 [ 2.268498] [sunxi-ehci2]: probe, pdev->name: 5310000.ehci2-controller, sunxi_ehci: 0xffffff800992a5a0, 0x:ffffff80081cf000, irq_no:122 8357 [ 2.268550] sunxi-ehci 5310000.ehci2-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 8358 [ 2.268575] sunxi-ehci 5310000.ehci2-controller: new USB bus registered, assigned bus number 2 8359 [ 2.268856] sunxi-ehci 5310000.ehci2-controller: irq 290, io mem 0xffffff80081cf000 8360 [ 2.279667] sunxi-ehci 5310000.ehci2-controller: USB 0.0 started, EHCI 1.00 8361 [ 2.279900] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 8362 [ 2.279908] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 8363 [ 2.279916] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 8364 [ 2.279923] usb usb2: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 8365 [ 2.279930] usb usb2: SerialNumber: sunxi-ehci 8366 [ 2.280780] hub 2-0:1.0: USB hub found 8367 [ 2.280827] hub 2-0:1.0: 1 port detected 8368 [ 2.281492] get drv_vbus is fail, 84 8369 [ 2.281501] get ehci3-controller, regulator_io is no nocare 8370 [ 2.281752] [sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffff800992a258, 0x:ffffff80081d9000, irq_no:124 8371 [ 2.281804] sunxi-ehci 5311000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 8372 [ 2.281829] sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 3 8373 [ 2.282118] sunxi-ehci 5311000.ehci3-controller: irq 292, io mem 0xffffff80081d9000 8374 [ 2.292996] sunxi-ehci 5311000.ehci3-controller: USB 0.0 started, EHCI 1.00 8375 [ 2.293184] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 8376 [ 2.293193] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 8377 [ 2.293201] usb usb3: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver 8378 [ 2.293208] usb usb3: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ehci_hcd 8379 [ 2.293214] usb usb3: SerialNumber: sunxi-ehci 8380 [ 2.294072] hub 3-0:1.0: USB hub found 8381 [ 2.294127] hub 3-0:1.0: 1 port detected 8382 [ 2.295056] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 8383 [ 2.295424] get drv_vbus is fail, 84 8384 [ 2.295433] get ohci0-controller, regulator_io is no nocare 8385 [ 2.295766] [sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffff800992b950 8386 [ 2.295771] [sunxi-ohci0]: Not init ohci0 8387 [ 2.295894] get ohci1-controller, regulator_io is no nocare 8388 [ 2.296065] hci: request ohci1-controller gpio:80 8389 [ 2.296142] [sunxi-ohci1]: probe, pdev->name: 5200000.ohci1-controller, sunxi_ohci: 0xffffff800992b608 8390 [ 2.296193] sunxi-ohci 5200000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 8391 [ 2.296221] sunxi-ohci 5200000.ohci1-controller: new USB bus registered, assigned bus number 4 8392 [ 2.296349] sunxi-ohci 5200000.ohci1-controller: irq 289, io mem 0x00000000 8393 [ 2.357161] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 8394 [ 2.357171] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 8395 [ 2.357179] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 8396 [ 2.357186] usb usb4: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 8397 [ 2.357193] usb usb4: SerialNumber: sunxi-ohci 8398 [ 2.358062] hub 4-0:1.0: USB hub found 8399 [ 2.358111] hub 4-0:1.0: 1 port detected 8400 [ 2.358785] get drv_vbus is fail, 84 8401 [ 2.358793] get ohci2-controller, regulator_io is no nocare 8402 [ 2.359127] [sunxi-ohci2]: probe, pdev->name: 5310000.ohci2-controller, sunxi_ohci: 0xffffff800992b2c0 8403 [ 2.359176] sunxi-ohci 5310000.ohci2-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 8404 [ 2.359200] sunxi-ohci 5310000.ohci2-controller: new USB bus registered, assigned bus number 5 8405 [ 2.359276] sunxi-ohci 5310000.ohci2-controller: irq 291, io mem 0x00000000 8406 [ 2.417156] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 8407 [ 2.417165] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 8408 [ 2.417173] usb usb5: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 8409 [ 2.417180] usb usb5: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 8410 [ 2.417187] usb usb5: SerialNumber: sunxi-ohci 8411 [ 2.418050] hub 5-0:1.0: USB hub found 8412 [ 2.418098] hub 5-0:1.0: 1 port detected 8413 [ 2.418769] get drv_vbus is fail, 84 8414 [ 2.418778] get ohci3-controller, regulator_io is no nocare 8415 [ 2.419116] [sunxi-ohci3]: probe, pdev->name: 5311000.ohci3-controller, sunxi_ohci: 0xffffff800992af78 8416 [ 2.419164] sunxi-ohci 5311000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver 8417 [ 2.419189] sunxi-ohci 5311000.ohci3-controller: new USB bus registered, assigned bus number 6 8418 [ 2.419272] sunxi-ohci 5311000.ohci3-controller: irq 293, io mem 0x00000000 8419 [ 2.477167] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 8420 [ 2.477177] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 8421 [ 2.477185] usb usb6: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver 8422 [ 2.477192] usb usb6: Manufacturer: Linux 4.9.318-legacy-sun50iw9 ohci_hcd 8423 [ 2.477199] usb usb6: SerialNumber: sunxi-ohci 8424 [ 2.478053] hub 6-0:1.0: USB hub found 8425 [ 2.478102] hub 6-0:1.0: 1 port detected 8426 [ 2.479025] ohci-platform: OHCI generic platform driver 8427 [ 2.479761] usbcore: registered new interface driver uas 8428 [ 2.479930] usbcore: registered new interface driver usb-storage 8429 [ 2.480022] usbcore: registered new interface driver ums-alauda 8430 [ 2.480105] usbcore: registered new interface driver ums-cypress 8431 [ 2.480180] usbcore: registered new interface driver ums-datafab 8432 [ 2.480252] usbcore: registered new interface driver ums_eneub6250 8433 [ 2.480324] usbcore: registered new interface driver ums-freecom 8434 [ 2.480398] usbcore: registered new interface driver ums-isd200 8435 [ 2.480467] usbcore: registered new interface driver ums-jumpshot 8436 [ 2.480538] usbcore: registered new interface driver ums-karma 8437 [ 2.480610] usbcore: registered new interface driver ums-onetouch 8438 [ 2.480705] usbcore: registered new interface driver ums-realtek 8439 [ 2.480786] usbcore: registered new interface driver ums-sddr09 8440 [ 2.480860] usbcore: registered new interface driver ums-sddr55 8441 [ 2.480930] usbcore: registered new interface driver ums-usbat 8442 [ 2.481078] usb_serial_number:20080411 8443 [ 2.482313] input: sunxi-keyboard as /devices/virtual/input/input0 8444 [ 2.482918] usbcore: registered new interface driver xpad 8445 [ 2.483079] usbcore: registered new interface driver usb_acecad 8446 [ 2.483182] usbcore: registered new interface driver aiptek 8447 [ 2.483274] usbcore: registered new interface driver gtco 8448 [ 2.483354] usbcore: registered new interface driver hanwang 8449 [ 2.483428] usbcore: registered new interface driver kbtab 8450 [ 2.483907] axp2101_pek: axp2101-pek can not register without irq 8451 [ 2.483929] axp2101-pek: probe of axp2101-pek.0 failed with error -22 8452 [ 2.485346] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0 8453 [ 2.485413] sunxi-rtc rtc: RTC enabled 8454 [ 2.485898] i2c /dev entries driver 8455 [ 2.486907] lirc_dev: IR Remote Control driver registered, major 244 8456 [ 2.486921] IR NEC protocol handler initialized 8457 [ 2.486927] IR RC5(x/sz) protocol handler initialized 8458 [ 2.486933] IR RC6 protocol handler initialized 8459 [ 2.486938] IR JVC protocol handler initialized 8460 [ 2.486944] IR Sony protocol handler initialized 8461 [ 2.486950] IR SANYO protocol handler initialized 8462 [ 2.486955] IR Sharp protocol handler initialized 8463 [ 2.486961] IR MCE Keyboard/mouse protocol handler initialized 8464 [ 2.486967] IR LIRC bridge handler initialized 8465 [ 2.486973] IR XMP protocol handler initialized 8466 [ 2.487486] sunxi_ir_startup: get ir protocol failed 8467 [ 2.487529] 7040000.s_cir supply ir0 not found, using dummy regulator 8468 [ 2.487721] Registered IR keymap rc_map_sunxi 8469 [ 2.488116] input: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0/input1 8470 [ 2.488357] rc rc0: sunxi_ir_recv as /devices/platform/soc/7040000.s_cir/rc/rc0 8471 [ 2.489366] input: MCE IR Keyboard/Mouse (sunxi-rc-recv) as /devices/virtual/input/input2 8472 [ 2.490022] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-rc-recv) registered at minor = 0 8473 [ 2.490724] sunxi cedar version 0.1 8474 [ 2.490913] VE: install start!!! 8475 8476 [ 2.491111] cedar_ve: cedar-ve the get irq is 278 8477 [ 2.491723] VE: get debugfs_mpp_root is NULL, please check mpp 8478 8479 [ 2.491736] VE: sunxi ve debug register driver failed! 8480 8481 [ 2.494939] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) 8482 [ 2.496210] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com 8483 [ 2.496595] Bluetooth: HCI UART driver ver 2.3 8484 [ 2.496606] Bluetooth: HCI UART protocol H4 registered 8485 [ 2.496611] Bluetooth: HCI UART protocol LL registered 8486 [ 2.496617] Bluetooth: HCI UART protocol Three-wire (H5) registered 8487 [ 2.500827] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 8488 [ 2.500842] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 8489 [ 2.500856] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 8490 [ 2.500867] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 8491 [ 2.500880] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:uart0 8492 [ 2.500892] sun50iw9p1-pinctrl pio: expect_func as:uart0_jtag, but muxsel(3) is func:jtag 8493 [ 2.501309] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 8494 [ 2.501428] sunxi-mmc sdc0: ***ctl-spec-caps*** 8 8495 [ 2.501623] sunxi-mmc sdc0: No vmmc regulator found 8496 [ 2.501630] sunxi-mmc sdc0: No vqmmc regulator found 8497 [ 2.501636] sunxi-mmc sdc0: No vdmmc regulator found 8498 [ 2.501643] sunxi-mmc sdc0: No vd33sw regulator found 8499 [ 2.501649] sunxi-mmc sdc0: No vd18sw regulator found 8500 [ 2.501655] sunxi-mmc sdc0: No vq33sw regulator found 8501 [ 2.501661] sunxi-mmc sdc0: No vq18sw regulator found 8502 [ 2.502371] sunxi-mmc sdc0: set host busy 8503 [ 2.502473] sunxi-mmc sdc0: Got CD GPIO 8504 [ 2.502857] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 8505 [ 2.502895] sunxi-mmc sdc0: no vqmmc,Check if there is regulator 8506 [ 2.516376] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8507 [ 2.533298] sunxi-mmc sdc0: detmode:gpio irq 8508 [ 2.533332] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8509 [ 2.535844] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8510 [ 2.536714] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14:29) 8511 [ 2.536825] sunxi-mmc sdc1: ***ctl-spec-caps*** 8 8512 [ 2.536966] sunxi-mmc sdc1: No vmmc regulator found 8513 [ 2.536973] sunxi-mmc sdc1: No vqmmc regulator found 8514 [ 2.536980] sunxi-mmc sdc1: No vdmmc regulator found 8515 [ 2.536986] sunxi-mmc sdc1: No vd33sw regulator found 8516 [ 2.536992] sunxi-mmc sdc1: No vd18sw regulator found 8517 [ 2.536998] sunxi-mmc sdc1: No vq33sw regulator found 8518 [ 2.537004] sunxi-mmc sdc1: No vq18sw regulator found 8519 [ 2.537718] sunxi-mmc sdc1: set host busy 8520 [ 2.537803] mmc:failed to get gpios 8521 [ 2.538013] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8522 [ 2.538075] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 8523 [ 2.540529] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8524 [ 2.553046] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8525 [ 2.564072] mmc0: host does not support reading read-only switch, assuming write-enable 8526 [ 2.565936] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 8527 [ 2.566012] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B 8528 [ 2.566157] sunxi-mmc sdc0: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B 8529 [ 2.566246] mmc0: new high speed SDXC card at address 0001 8530 [ 2.567310] mmcblk0: mmc0:0001 SD16G 59.5 GiB 8531 [ 2.568929] mmcblk0: p1 8532 [ 2.569701] sunxi-mmc sdc1: detmode:manually by software 8533 [ 2.572007] ledtrig-cpu: registered to indicate activity on CPUs 8534 [ 2.572640] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 8535 [ 2.573501] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 8536 [ 2.573535] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8537 [ 2.576038] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8538 [ 2.577979] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 8539 [ 2.578814] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 8540 [ 2.579346] sunxi_emce_hw_init()368Unable to get pclk, return fffffffe 8541 [ 2.579356] sunxi_emce_probe()590emce hw init failed! 8542 [ 2.579383] emce: probe of emce failed with error -2 8543 [ 2.579661] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 8544 [ 2.579706] hidraw: raw HID events driver (C) Jiri Kosina 8545 [ 2.580515] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !! 8546 [ 2.580558] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B 8547 [ 2.584734] usbcore: registered new interface driver usbhid 8548 [ 2.584742] usbhid: USB HID core driver 8549 [ 2.586156] optee: probing for conduit method from DT. 8550 [ 2.586170] optee: api uid mismatch 8551 [ 2.586791] usbcore: registered new interface driver snd-usb-audio 8552 [ 2.588405] [sunxi_hdmi_codec_init] driver and deivce register finished. 8553 [ 2.590251] [sunxi_internal_codec_probe]:get audio avcc failed 8554 [ 2.590288] [sunxi_internal_codec_probe]:get audio vcc3v3-audio failed 8555 [ 2.590522] lineout_vol:26, linein_gain:3, fmin_gain:3, digital_vol:0, adcdrc_cfg:0, adchpf_cfg:0, dacdrc_cfg:0, dachpf_cfg:0, ramp_func_used:1, pa_msleep_time:100, pa_ctl_level:1, gpio-spk:0 8556 [ 2.593057] sunxi-codec-machine sndcodec: sun50iw9-codec <-> cpudai mapping ok 8557 [ 2.595028] sndhdmi sndhdmi: ASoC: CPU DAI (null) not registered 8558 [ 2.595041] sndhdmi sndhdmi: snd_soc_register_card() failed: -517 8559 [ 2.597331] sunxi-ahub-cpudai 5097000.cpudai3-controller: ahub cpudai id invalid 8560 [ 2.597354] sunxi-ahub-cpudai: probe of 5097000.cpudai3-controller failed with error -22 8561 [ 2.601497] sndahub sndahub: sunxi-ahub-aif1 <-> 5097000.cpudai0-controller mapping ok 8562 [ 2.602879] sndahub sndahub: sunxi-ahub-aif2 <-> 5097000.cpudai1-controller mapping ok 8563 [ 2.604821] sndahub sndahub: sunxi-ahub-aif3 <-> 5097000.cpudai2-controller mapping ok 8564 [ 2.607941] pktgen: Packet Generator for packet performance testing. Version: 2.75 8565 [ 2.608358] u32 classifier 8566 [ 2.608365] Actions configured 8567 [ 2.608377] Netfilter messages via NETLINK v0.30. 8568 [ 2.608412] nfnl_acct: registering with nfnetlink. 8569 [ 2.608756] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) 8570 [ 2.609006] ctnetlink v0.93: registering with nfnetlink. 8571 [ 2.609825] xt_time: kernel timezone is -0000 8572 [ 2.609850] IPVS: Registered protocols (TCP, UDP) 8573 [ 2.609966] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) 8574 [ 2.610093] IPVS: Creating netns size=1928 id=0 8575 [ 2.610224] IPVS: ipvs loaded. 8576 [ 2.610232] IPVS: [rr] scheduler registered. 8577 [ 2.610330] ipip: IPv4 and MPLS over IPv4 tunneling driver 8578 [ 2.611032] gre: GRE over IPv4 demultiplexor driver 8579 [ 2.611040] ip_gre: GRE over IPv4 tunneling driver 8580 [ 2.612335] IPv4 over IPsec tunneling driver 8581 [ 2.613220] ip_tables: (C) 2000-2006 Netfilter Core Team 8582 [ 2.613513] arp_tables: arp_tables: (C) 2002 David S. Miller 8583 [ 2.613577] Initializing XFRM netlink socket 8584 [ 2.613610] IPsec XFRM device driver 8585 [ 2.614458] NET: Registered protocol family 10 8586 [ 2.616399] mip6: Mobile IPv6 8587 [ 2.616442] ip6_tables: (C) 2000-2006 Netfilter Core Team 8588 [ 2.617778] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver 8589 [ 2.619393] NET: Registered protocol family 17 8590 [ 2.619435] NET: Registered protocol family 15 8591 [ 2.619593] Bridge firewalling registered 8592 [ 2.619825] Bluetooth: RFCOMM TTY layer initialized 8593 [ 2.619857] Bluetooth: RFCOMM socket layer initialized 8594 [ 2.619890] Bluetooth: RFCOMM ver 1.11 8595 [ 2.619904] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 8596 [ 2.619910] Bluetooth: BNEP filters: protocol multicast 8597 [ 2.619923] Bluetooth: BNEP socket layer initialized 8598 [ 2.619929] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 8599 [ 2.619940] Bluetooth: HIDP socket layer initialized 8600 [ 2.620040] l2tp_core: L2TP core driver, V2.0 8601 [ 2.620055] l2tp_ppp: PPPoL2TP kernel driver, V2.0 8602 [ 2.620061] 8021q: 802.1Q VLAN Support v1.8 8603 [ 2.620273] sctp: Hash tables configured (bind 256/256) 8604 [ 2.620854] Key type dns_resolver registered 8605 [ 2.620994] Registered cp15_barrier emulation handler 8606 [ 2.621007] Registered setend emulation handler 8607 [ 2.621924] registered taskstats version 1 8608 [ 2.633581] zswap: default zpool zbud not available 8609 [ 2.633589] zswap: pool creation failed 8610 [ 2.636385] Btrfs loaded, crc32c=crc32c-arm64-hw 8611 [ 2.637159] HDMI 2.0 driver init start! 8612 [ 2.637174] boot_hdmi=true 8613 [ 2.637967] Can not find the node of esm 8614 [ 2.637985] ERROR: pinctrl_get for HDMI2.0 DDC fail 8615 [ 2.638077] Get hdmi_power0:vcc-hdmi 8616 [ 2.638116] 6000000.hdmi supply vcc-hdmi not found, using dummy regulator 8617 [ 2.638286] Get hdmi_power1:vdd-hdmi 8618 [ 2.638308] 6000000.hdmi supply vdd-hdmi not found, using dummy regulator 8619 [ 2.639871] hdmi_cec_init 8620 [ 2.640362] [DISP] disp_device_attached,line:146: 8621 [ 2.640372] attached ok, mgr0<-->device0, type=4 8622 [ 2.640382] [HDMI receive params]: tv mode: 0xa format:0x0 data bits:0x0 eotf:0x0 cs:0x0 dvi_hdmi:2 range:2 scan:0 aspect_ratio:8 8623 [ 2.640395] [DISP] disp_hdmi_set_mode,line:648: 8624 [ 2.640399] hdmi_set_mode is null! 8625 [ 2.643344] HDMI2.0 module init end 8626 [ 2.654464] sunxi-thermal 5070400.thermal_sensor: avcc is not calibrated 8627 [ 2.657947] cpu cpu1: opp_list_debug_create_link: Failed to create link 8628 [ 2.657959] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12) 8629 [ 2.657991] cpu cpu2: opp_list_debug_create_link: Failed to create link 8630 [ 2.657998] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12) 8631 [ 2.658028] cpu cpu3: opp_list_debug_create_link: Failed to create link 8632 [ 2.658035] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12) 8633 [ 2.660318] sndhdmi sndhdmi: audiohdmi-dai <-> sunxi-ahub-cpu-aif1 mapping ok 8634 [ 2.661220] get det_vbus is fail, 84 8635 [ 2.661227] get id is fail, 84 8636 [ 2.661721] sunxi-rtc rtc: setting system clock to 2023-09-25 18:30:00 UTC (1695666600) 8637 [ 2.665499] ALSA device list: 8638 [ 2.665507] #0: audiocodec 8639 [ 2.665510] #1: sndahub 8640 [ 2.665514] #2: sndhdmi 8641 [ 2.667177] Freeing unused kernel memory: 3008K 8642 [ 2.712490] random: systemd-udevd: uninitialized urandom read (16 bytes read) 8643 [ 2.714526] random: systemd-udevd: uninitialized urandom read (16 bytes read) 8644 [ 2.717507] random: systemd-udevd: uninitialized urandom read (16 bytes read) 8645 [ 2.790131] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device connect 8646 [ 2.953094] sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device disconnect 8647 [ 3.046476] HDMI cable is connected 8648 [ 3.303019] usb 4-1: new full-speed USB device number 2 using sunxi-ohci 8649 [ 3.523445] usb 4-1: New USB device found, idVendor=24ae, idProduct=2013 8650 [ 3.523453] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 8651 [ 3.523458] usb 4-1: Product: Rapoo 2.4G Wireless Device 8652 [ 3.523463] usb 4-1: Manufacturer: RAPOO 8653 [ 3.531450] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.0/0003:24AE:2013.0001/input/input3 8654 [ 3.531851] hid-generic 0003:24AE:2013.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input0 8655 [ 3.538116] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.1/0003:24AE:2013.0002/input/input4 8656 [ 3.593821] hid-generic 0003:24AE:2013.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input1 8657 [ 3.597732] input: RAPOO Rapoo 2.4G Wireless Device as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1:1.2/0003:24AE:2013.0003/input/input5 8658 [ 3.655013] hid-generic 0003:24AE:2013.0003: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-sunxi-ohci-1/input2 8659 [ 4.172009] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null) 8660 [ 5.088174] cgroup: cgroup2: unknown option "nsdelegate,memory_recursiveprot" 8661 [ 5.088729] cgroup: cgroup2: unknown option "nsdelegate" 8662 [ 5.108905] systemd[1]: systemd 252.12-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) 8663 [ 5.108928] systemd[1]: Detected architecture arm64. 8664 [ 5.110063] systemd[1]: Warning! Reported kernel version 4.9.318-legacy-sun50iw9 is older than systemd's required baseline kernel version 4.15. Your mileage may vary. 8665 [ 5.120132] systemd[1]: Hostname set to <opi>. 8666 [ 5.147190] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation 8667 [ 6.751702] (sd-execut[1458]: /usr/lib/systemd/system-generators/netplan failed with exit status 1. 8668 [ 6.826412] 8669 insmod_device_driver 8670 8671 [ 6.826664] device_chose finished 124! 8672 [ 7.115440] systemd[1]: /lib/systemd/system/hdmi-audio.service:10: Support for option SysVStartPriority= has been removed and it is ignored 8673 [ 7.353360] systemd[1]: Queued start job for default target graphical.target. 8674 [ 7.360912] systemd[1]: Created slice system-getty.slice - Slice /system/getty. 8675 [ 7.363078] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. 8676 [ 7.365312] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. 8677 [ 7.366692] systemd[1]: Created slice user.slice - User and Session Slice. 8678 [ 7.367364] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. 8679 [ 7.367910] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 8680 [ 7.368238] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. 8681 [ 7.368754] systemd[1]: Reached target slices.target - Slice Units. 8682 [ 7.369075] systemd[1]: Reached target swap.target - Swaps. 8683 [ 7.369356] systemd[1]: Reached target time-set.target - System Time Set. 8684 [ 7.369884] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. 8685 [ 7.387168] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket. 8686 [ 7.388284] systemd[1]: Listening on syslog.socket - Syslog Socket. 8687 [ 7.389250] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. 8688 [ 7.389957] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. 8689 [ 7.391577] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. 8690 [ 7.392533] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). 8691 [ 7.393634] systemd[1]: Listening on systemd-journald.socket - Journal Socket. 8692 [ 7.395836] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. 8693 [ 7.396804] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. 8694 [ 7.400774] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... 8695 [ 7.405320] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... 8696 [ 7.410389] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... 8697 [ 7.411621] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 8698 [ 7.412593] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). 8699 [ 7.420265] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... 8700 [ 7.425722] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... 8701 [ 7.431650] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... 8702 [ 7.440500] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... 8703 [ 7.447331] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 8704 [ 7.454548] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... 8705 [ 7.462303] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 8706 [ 7.473740] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... 8707 [ 7.481344] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 8708 [ 7.482443] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). 8709 [ 7.493092] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... 8710 [ 7.499560] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... 8711 [ 7.506195] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... 8712 [ 7.516841] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. 8713 [ 7.519005] fuse init (API version 7.26) 8714 [ 7.519490] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. 8715 [ 7.522235] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. 8716 [ 7.526118] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. 8717 [ 7.529936] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. 8718 [ 7.533852] systemd[1]: modprobe@configfs.service: Deactivated successfully. 8719 [ 7.534744] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. 8720 [ 7.538055] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 8721 [ 7.538688] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 8722 [ 7.541365] systemd[1]: modprobe@drm.service: Deactivated successfully. 8723 [ 7.542298] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. 8724 [ 7.574567] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro 8725 [ 7.591901] fbtft: module is from the staging directory, the quality is unknown, you have been warned. 8726 [ 7.607877] fbtft_device: module is from the staging directory, the quality is unknown, you have been warned. 8727 [ 7.608629] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 8728 [ 7.608639] spidev spi1.1: dh2228fv spi1.1 16777kHz 8 bits mode=0x00 8729 [ 7.608821] spidev spi1.1: Deleting spi1.1 8730 [ 7.609454] fbtft_device: GPIOS used by 'fb_st7735r': 8731 [ 7.609461] fbtft_device: 'reset' = GPIO73 8732 [ 7.609465] fbtft_device: 'dc' = GPIO70 8733 [ 7.609475] spidev spi0.0: dh2228fv spi0.0 16777kHz 8 bits mode=0x00 8734 [ 7.609481] spi spi1.1: fb_st7735r spi1.1 16000kHz 8 bits mode=0x00 8735 [ 7.638015] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 8736 [ 7.638919] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 8737 [ 7.645879] systemd[1]: modprobe@fuse.service: Deactivated successfully. 8738 [ 7.646962] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. 8739 [ 7.648404] WCN: marlin_init entry! 8740 [ 7.649755] WCN: marlin_parse_dt reset gpio=211 8741 [ 7.649767] WCN_ERR: gpio reset request err: 211 8742 [ 7.649773] WCN: wcn config bt wake host 8743 [ 7.650362] WCN: marlin_registsr_bt_wake bt_hostwake gpio=208 mul-sel=6 pull=-1 drv_level=-1 data=0 intnum=193 8744 [ 7.650505] WCN: wcn config wifi wake host 8745 [ 7.650528] sdiohal:sdiohal_parse_dt adma_tx:1, adma_rx:1, pwrseq:0, irq type:data, gpio_num:0, blksize:840 8746 [ 7.650657] systemd[1]: modprobe@loop.service: Deactivated successfully. 8747 [ 7.651761] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 8748 [ 7.654271] sdiohal:sdiohal_init ok 8749 [ 7.655500] WCN: marlin_probe ok! 8750 [ 7.664425] mtty_probe init device addr: 0xffffffc009691300 8751 [ 7.664618] -->rfkill_bluetooth_init 8752 [ 7.664783] <--rfkill_bluetooth_init 8753 [ 7.707577] WCN: start_marlin [MARLIN_WIFI] 8754 [ 7.707591] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 8755 [ 7.707594] WCN: the first power on start 8756 [ 7.734127] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. 8757 [ 7.741893] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... 8758 [ 7.747724] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... 8759 [ 7.748381] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 8760 [ 7.754364] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... 8761 [ 7.755073] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 8762 [ 7.762283] systemd[1]: Starting systemd-sysusers.service - Create System Users... 8763 [ 7.777941] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. 8764 [ 7.789071] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. 8765 [ 7.791343] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. 8766 [ 7.823067] WCN: marlin chip en pull up 8767 [ 7.846466] systemd[1]: Finished systemd-sysusers.service - Create System Users. 8768 [ 7.849776] sdiohal:sdiohal_scan_card 8769 [ 7.849796] sunxi-wlan soc@03000000:wlan: bus_index: 1 8770 [ 7.849843] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B 8771 [ 7.853128] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... 8772 [ 7.869767] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8773 [ 7.887224] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 8774 [ 7.888126] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !! 8775 [ 7.888152] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8776 [ 7.890713] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8777 [ 7.893813] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8778 [ 7.909833] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B 8779 [ 7.921526] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B 8780 [ 7.922310] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 8781 [ 7.922399] sunxi-mmc sdc1: sdc set ios:clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B 8782 [ 7.923148] mmc1: new ultra high speed SDR104 SDIO card at address 8800 8783 [ 7.923572] sdiohal:sdiohal_probe: func->class=0, vendor=0x0000, device=0x0000, func_num=0x0001, clock=150000000 8784 [ 7.923777] WCN: marlin_get_wcn_chipid: chipid: 0x2355b001 8785 [ 7.923802] WCN: marlin_scan_finish! 8786 [ 7.923806] sdiohal:probe ok 8787 [ 7.923815] sdiohal:scan end! 8788 [ 7.923822] WCN: then marlin start to download 8789 [ 7.923852] WCN: marlin_request_firmware from /lib/firmware/wcnmodem.bin start! 8790 [ 7.975932] systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices. 8791 [ 8.003941] systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown... 8792 [ 8.009254] systemd[1]: Starting systemd-udev-settle.service - Wait for udev To Complete Device Initialization... 8793 [ 8.028187] systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev. 8794 [ 8.031986] systemd[1]: Finished ifupdown-pre.service - Helper to synchronize boot up for ifupdown. 8795 [ 8.034815] systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems. 8796 [ 8.054097] WCN: combin_img 0 marlin_firmware_write finish and successful 8797 [ 8.054258] WCN: marlin_start_run read reset reg val:0x1 8798 [ 8.054262] WCN: after do marlin_start_run reset reg val:0x0 8799 [ 8.054446] WCN: s_marlin_bootup_time=8054442843 8800 [ 8.059830] WCN: clock mode: TSX 8801 [ 8.060008] WCN: marlin_write_cali_data sync init_state:0x1a0f50 8802 [ 8.086581] WCN: marlin_write_cali_data sync init_state:0x1a0f50 8803 [ 8.103931] systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files... 8804 [ 8.113313] WCN: marlin_write_cali_data sync init_state:0xf0f0f0f1 8805 [ 8.113320] WCN: sdio_config bt_wake_host trigger:[high] 8806 [ 8.113324] WCN: sdio_config irq:[inband] 8807 [ 8.113328] WCN: sdio_config wl_wake_host trigger:[high] 8808 [ 8.113333] WCN: sdio_config wake_host_level_duration_time:[20ms] 8809 [ 8.113336] WCN: sdio_config wake_host_data_separation:[bt/wifi reuse] 8810 [ 8.113341] WCN: marlin_send_sdio_config_to_cp sdio_config:0xb8f01 (enable config) 8811 [ 8.113836] WCN: marlin_write_cali_data finish 8812 [ 8.114047] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 8813 [ 8.140045] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 8814 [ 8.166816] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 8815 [ 8.194046] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 8816 [ 8.220108] WCN: check_cp_ready sync val:0xf0f0f0f2, prj_type val:0x0 8817 [ 8.246820] WCN: check_cp_ready sync val:0xf0f0f0f6, prj_type val:0x0 8818 [ 8.246830] WCN: marlin_bind_verify confuse data: 0x2e197f4f5a117df30c640a9405a3d69 8819 [ 8.246846] WCN: marlin_bind_verify verify data: 0x16d6ab91e1d71b3ae4604f224021aa 8820 [ 8.247587] WCN: check_cp_ready sync val:0xf0f0f0f7, prj_type val:0x0 8821 [ 8.273306] WCN: check_cp_ready sync val:0xf0f0f0ff, prj_type val:0x0 8822 [ 8.273314] sdiohal:sdiohal_runtime_get entry 8823 [ 8.273538] WCN: get_cp2_version entry! 8824 [ 8.275022] WCN: WCND at cmd read:WCN_VER:Platform Version:MARLIN3_19B_W20.37.4~Project Version:sc2355_marlin3_lite_ott~09-11-2020 21:27:32~ 8825 [ 8.276174] WCN: switch_cp2_log - close entry! 8826 [ 8.277357] WCN: WCND at cmd read:OK 8827 [ 8.277407] WCN: then marlin download finished and run ok 8828 [ 8.277413] WCN: start_loopcheck 8829 [ 8.291310] WCN: get_board_ant_num [one_ant] 8830 [ 8.291321] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini 8831 [ 8.351243] unisoc_wifi unisoc_wifi wlan0: mixed HW and IP checksum settings. 8832 [ 8.355693] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. 8833 [ 8.363121] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... 8834 [ 8.426057] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. 8835 [ 8.473186] systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files. 8836 [ 8.482704] systemd[1]: Starting plymouth-start.service - Show Plymouth Boot Screen... 8837 [ 8.556898] systemd[1]: Mounting tmp.mount - /tmp... 8838 [ 8.563210] fb_st7735r: module is from the staging directory, the quality is unknown, you have been warned. 8839 [ 8.577168] systemd[1]: Mounted tmp.mount - /tmp. 8840 [ 8.583105] systemd[1]: Reached target local-fs.target - Local File Systems. 8841 [ 8.595141] systemd[1]: Starting armbian-led-state.service - Armbian leds state... 8842 [ 8.603193] systemd[1]: Starting armbian-zram-config.service - Armbian ZRAM config... 8843 [ 8.614005] systemd[1]: Starting console-setup.service - Set console font and keymap... 8844 [ 8.630626] systemd[1]: Starting plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data... 8845 [ 8.657014] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 8846 [ 8.667052] systemd[1]: Starting ufw.service - Uncomplicated firewall... 8847 [ 8.672909] systemd[1]: Started plymouth-start.service - Show Plymouth Boot Screen. 8848 [ 8.711853] systemd[1]: Finished console-setup.service - Set console font and keymap. 8849 [ 8.715338] systemd[1]: Finished plymouth-read-write.service - Tell Plymouth To Write Out Runtime Data. 8850 [ 8.718391] systemd[1]: Received SIGRTMIN+20 from PID 1420 (plymouthd). 8851 [ 8.719486] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 8852 [ 8.720812] systemd[1]: Started systemd-ask-password-plymouth.path - Forward Password Requests to Plymouth Directory Watch. 8853 [ 8.721402] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. 8854 [ 8.722909] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 8855 [ 8.729296] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 8856 [ 8.730244] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 8857 [ 8.733715] systemd[1]: Finished ufw.service - Uncomplicated firewall. 8858 [ 8.735896] systemd[1]: Reached target network-pre.target - Preparation for Network. 8859 [ 8.820062] systemd[1]: Starting networking.service - Raise network interfaces... 8860 [ 8.823212] systemd[1]: Finished armbian-led-state.service - Armbian leds state. 8861 [ 9.134198] zram: Added device: zram0 8862 [ 9.137482] zram: Added device: zram1 8863 [ 9.140693] zram: Added device: zram2 8864 [ 9.213815] zswap: can't enable, initialization failed 8865 [ 9.283892] zram0: detected capacity change from 0 to 506396672 8866 [ 9.468604] systemd[1]: Finished networking.service - Raise network interfaces. 8867 [ 10.026558] graphics fb1: fb_st7735r frame buffer, 160x128, 40 KiB video memory, 4 KiB buffer memory, fps=20, spi1.1 at 16 MHz 8868 [ 10.087472] systemd[1]: Found device dev-ttyS0.device - /dev/ttyS0. 8869 [ 10.255438] systemd[1]: Reached target usb-gadget.target - Hardware activated USB gadget. 8870 [ 10.838127] systemd[1]: systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch was skipped because of an unmet condition check (ConditionPathExists=!/run/plymouth/pid). 8871 [ 10.838386] systemd[1]: proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point was skipped because of an unmet condition check (ConditionPathExists=/proc/sys/fs/binfmt_misc). 8872 [ 10.842784] systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch. 8873 [ 10.844808] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). 8874 [ 10.862392] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... 8875 [ 10.872755] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... 8876 [ 10.902803] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... 8877 [ 10.923927] systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats... 8878 [ 10.931494] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. 8879 [ 10.932769] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. 8880 [ 10.936796] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. 8881 [ 10.937756] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. 8882 [ 10.945788] systemd[1]: modprobe@loop.service: Deactivated successfully. 8883 [ 10.946873] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. 8884 [ 10.963034] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). 8885 [ 10.963434] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. 8886 [ 11.010957] systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status... 8887 [ 11.013289] systemd[1]: systemd-binfmt.service: Main process exited, code=exited, status=1/FAILURE 8888 [ 11.014319] systemd[1]: systemd-binfmt.service: Failed with result 'exit-code'. 8889 [ 11.015398] systemd[1]: Failed to start systemd-binfmt.service - Set Up Additional Binary Formats. 8890 [ 11.052518] sunxi-bt soc@03000000:bt: set block: 0 8891 [ 11.064965] bluetooth_set_power: start_block=0 8892 [ 11.064975] WCN: start_marlin [MARLIN_BLUETOOTH] 8893 [ 11.064987] WCN: marlin power state:4, subsys: [MARLIN_BLUETOOTH] power 1 8894 [ 11.064992] WCN: marlin have open, GNSS is closed 8895 [ 11.064998] bluetooth_set_power: end_block=0 8896 [ 11.078425] systemd[1]: Started systemd-rfkill.service - Load/Save RF Kill Switch Status. 8897 [ 11.125453] systemd[1]: Finished systemd-udev-settle.service - Wait for udev To Complete Device Initialization. 8898 [ 11.131316] systemd[1]: Starting brltty.service - Braille Device Support... 8899 [ 11.848745] systemd[1]: Started brltty.service - Braille Device Support. 8900 [ 11.863372] input: BRLTTY 6.5 Linux Screen Driver Keyboard as /devices/virtual/input/input6 8901 [ 12.318625] Adding 494524k swap on /dev/zram0. Priority:5 extents:1 across:494524k SSFS 8902 [ 12.459276] zram1: detected capacity change from 0 to 52428800 8903 [ 16.088924] systemd[1]: systemd-rfkill.service: Deactivated successfully. 8904 [ 16.536118] systemd[1]: Finished armbian-zram-config.service - Armbian ZRAM config. 8905 [ 16.542493] systemd[1]: Starting armbian-ramlog.service - Armbian memory supported logging... 8906 [ 16.604114] EXT4-fs (zram1): mounted filesystem without journal. Opts: discard 8907 [ 20.536223] systemd[1]: Finished armbian-ramlog.service - Armbian memory supported logging. 8908 [ 20.542685] systemd[1]: Starting systemd-journald.service - Journal Service... 8909 [ 20.811168] systemd-journald[1921]: Data hash table of /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal has a fill level at 75.2 (1658 of 2204 items, 1269760 file size, 765 bytes per hash table item), suggesting rotation. 8910 [ 20.811191] systemd-journald[1921]: /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal: Journal header limits reached or header out-of-date, rotating. 8911 [ 20.818287] systemd[1]: Started systemd-journald.service - Journal Service. 8912 [ 20.865608] systemd-journald[1921]: Received client request to flush runtime journal. 8913 [ 21.145803] IPVS: Creating netns size=1928 id=1 8914 8915 ### armbian-release: 8916 8917 # PLEASE DO NOT EDIT THIS FILE 8918 BOARD=orangepizero2 8919 BOARD_NAME="Orange Pi Zero2" 8920 BOARDFAMILY=sun50iw9 8921 BUILD_REPOSITORY_URL=https://github.com/armbian/build 8922 BUILD_REPOSITORY_COMMIT=ac829eb6 8923 LINUXFAMILY=sun50iw9 8924 ARCH=arm64 8925 IMAGE_TYPE=stable 8926 BOARD_TYPE=conf 8927 INITRD_ARCH=arm 8928 KERNEL_IMAGE_TYPE=Image 8929 FORCE_BOOTSCRIPT_UPDATE=yes 8930 VENDOR=Armbian 8931 BOOTSCRIPT_FORCE_UPDATE="yes" 8932 BOOTSCRIPT_DST="boot.cmd" 8933 VERSION=23.8.1 8934 REVISION=23.8.1 8935 BRANCH=legacy 8936 8937 ### boot environment: 8938 8939 verbosity=1 8940 console=serial 8941 #disp_mode=1080p60 8942 #fb0_width=1280 8943 #fb0_height=720 8944 rootdev=UUID=0c85f38a-a16e-49a0-a53c-99d9856e983e 8945 rootfstype=ext4 8946 overlays=spi-spidev 8947 param_spidev_spi_bus=1 8948 param_spidev_spi_cs=1 8949 extraargs=fbcon=map:1 8950 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u 8951 8952 ### lsusb: 8953 8954 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 8955 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 8956 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 8957 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 8958 Bus 004 Device 002: ID 24ae:2013 Shenzhen Rapoo Technology Co., Ltd. Rapoo 2.4G Wireless Device 8959 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 8960 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 8961 8962 ### lscpu: 8963 8964 Architecture: aarch64 8965 CPU op-mode(s): 32-bit, 64-bit 8966 Byte Order: Little Endian 8967 CPU(s): 4 8968 On-line CPU(s) list: 0-3 8969 Vendor ID: ARM 8970 Model name: Cortex-A53 8971 Model: 4 8972 Thread(s) per core: 1 8973 Core(s) per cluster: 4 8974 Socket(s): - 8975 Cluster(s): 1 8976 Stepping: r0p4 8977 CPU(s) scaling MHz: 100% 8978 CPU max MHz: 1512.0000 8979 CPU min MHz: 480.0000 8980 BogoMIPS: 48.00 8981 Flags: fp asimd aes pmull sha1 sha2 crc32 8982 8983 ### cpuinfo: 8984 8985 processor : 0 8986 BogoMIPS : 48.00 8987 Features : fp asimd aes pmull sha1 sha2 crc32 8988 CPU implementer : 0x41 8989 CPU architecture: 8 8990 CPU variant : 0x0 8991 CPU part : 0xd03 8992 CPU revision : 4 8993 8994 processor : 1 8995 BogoMIPS : 48.00 8996 Features : fp asimd aes pmull sha1 sha2 crc32 8997 CPU implementer : 0x41 8998 CPU architecture: 8 8999 CPU variant : 0x0 9000 CPU part : 0xd03 9001 CPU revision : 4 9002 9003 processor : 2 9004 BogoMIPS : 48.00 9005 Features : fp asimd aes pmull sha1 sha2 crc32 9006 CPU implementer : 0x41 9007 CPU architecture: 8 9008 CPU variant : 0x0 9009 CPU part : 0xd03 9010 CPU revision : 4 9011 9012 processor : 3 9013 BogoMIPS : 48.00 9014 Features : fp asimd aes pmull sha1 sha2 crc32 9015 CPU implementer : 0x41 9016 CPU architecture: 8 9017 CPU variant : 0x0 9018 CPU part : 0xd03 9019 CPU revision : 4 9020 9021 9022 ### meminfo: 9023 9024 MemTotal: 989056 kB 9025 MemFree: 790420 kB 9026 MemAvailable: 885996 kB 9027 Buffers: 15620 kB 9028 Cached: 86968 kB 9029 SwapCached: 0 kB 9030 Active: 65592 kB 9031 Inactive: 58252 kB 9032 Active(anon): 21428 kB 9033 Inactive(anon): 652 kB 9034 Active(file): 44164 kB 9035 Inactive(file): 57600 kB 9036 Unevictable: 0 kB 9037 Mlocked: 0 kB 9038 SwapTotal: 494524 kB 9039 SwapFree: 494524 kB 9040 Dirty: 11316 kB 9041 Writeback: 0 kB 9042 AnonPages: 21292 kB 9043 Mapped: 24272 kB 9044 Shmem: 828 kB 9045 Slab: 33084 kB 9046 SReclaimable: 9272 kB 9047 SUnreclaim: 23812 kB 9048 KernelStack: 2512 kB 9049 PageTables: 1116 kB 9050 NFS_Unstable: 0 kB 9051 Bounce: 0 kB 9052 WritebackTmp: 0 kB 9053 CommitLimit: 989052 kB 9054 Committed_AS: 79636 kB 9055 VmallocTotal: 263061440 kB 9056 VmallocUsed: 0 kB 9057 VmallocChunk: 0 kB 9058 CmaTotal: 16384 kB 9059 CmaFree: 7468 kB 9060 HugePages_Total: 0 9061 HugePages_Free: 0 9062 HugePages_Rsvd: 0 9063 HugePages_Surp: 0 9064 Hugepagesize: 2048 kB 9065 9066 ### virtual memory: 9067 9068 vm.admin_reserve_kbytes = 8192 9069 vm.block_dump = 0 9070 vm.compact_unevictable_allowed = 1 9071 vm.dirty_background_bytes = 0 9072 vm.dirty_background_ratio = 10 9073 vm.dirty_bytes = 0 9074 vm.dirty_expire_centisecs = 3000 9075 vm.dirty_ratio = 20 9076 vm.dirtytime_expire_seconds = 43200 9077 vm.dirty_writeback_centisecs = 500 9078 vm.extfrag_threshold = 500 9079 vm.extra_free_kbytes = 0 9080 vm.hugepages_treat_as_movable = 0 9081 vm.hugetlb_shm_group = 0 9082 vm.laptop_mode = 0 9083 vm.legacy_va_layout = 0 9084 vm.lowmem_reserve_ratio = 256 32 9085 vm.max_map_count = 65530 9086 vm.min_free_kbytes = 3937 9087 vm.mmap_min_addr = 4096 9088 vm.mmap_rnd_bits = 18 9089 vm.mmap_rnd_compat_bits = 11 9090 vm.nr_hugepages = 0 9091 vm.nr_overcommit_hugepages = 0 9092 vm.nr_pdflush_threads = 0 9093 vm.oom_dump_tasks = 1 9094 vm.oom_kill_allocating_task = 0 9095 vm.overcommit_kbytes = 0 9096 vm.overcommit_memory = 0 9097 vm.overcommit_ratio = 50 9098 vm.page-cluster = 0 9099 vm.panic_on_oom = 0 9100 vm.percpu_pagelist_fraction = 0 9101 vm.stat_interval = 1 9102 vm.swappiness = 100 9103 vm.user_reserve_kbytes = 29998 9104 vm.vfs_cache_pressure = 100 9105 vm.watermark_scale_factor = 10 9106 9107 ### ip addr: 9108 9109 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 9110 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 9111 inet XXX.XXX.0.1/8 scope host lo 9112 valid_lft forever preferred_lft forever 9113 inet6 ::1/128 scope host noprefixroute 9114 valid_lft forever preferred_lft forever 9115 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 9116 link/ether a2:f9:75:52:ad:58 brd ff:ff:ff:ff:ff:ff 9117 3: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 9118 link/ether fa:6e:f4:da:68:8c brd ff:ff:ff:ff:ff:ff 9119 4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 9120 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 9121 5: gre0@NONE: <NOARP> mtu 1476 qdisc noop state DOWN group default qlen 1 9122 link/gre XXX.XXX.0.0 brd XXX.XXX.0.0 9123 6: gretap0@NONE: <BROADCAST,MULTICAST> mtu 1462 qdisc noop state DOWN group default qlen 1000 9124 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 9125 7: ip_vti0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 9126 link/ipip XXX.XXX.0.0 brd XXX.XXX.0.0 9127 8: ip6_vti0@NONE: <NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1 9128 link/tunnel6 :: brd :: 9129 9: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1 9130 link/sit XXX.XXX.0.0 brd XXX.XXX.0.0 9131 10: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN group default qlen 1 9132 link/tunnel6 :: brd :: 9133 11: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 9134 link/ether 48:c9:27:84:d1:40 brd ff:ff:ff:ff:ff:ff 9135 9136 ### partitions: 9137 9138 major minor #blocks name 9139 9140 179 0 62410752 mmcblk0 9141 179 1 61763584 mmcblk0p1 9142 253 0 494528 zram0 9143 253 1 51200 zram1 9144 9145 ### df: 9146 9147 udev 466M 0 466M 0% /dev 9148 tmpfs 97M 2.1M 95M 3% /run 9149 /dev/mmcblk0p1 58G 7.3G 51G 13% / 9150 tmpfs 483M 0 483M 0% /dev/shm 9151 tmpfs 5.0M 0 5.0M 0% /run/lock 9152 tmpfs 483M 4.0K 483M 1% /tmp 9153 /dev/zram1 47M 11M 33M 25% /var/log 9154 9155 ### lsblk: 9156 9157 NAME FSTYPE SIZE MOUNTPOINT UUID 9158 mmcblk0 59.5G 9159 └─mmcblk0p1 ext4 58.9G / 0c85f38a-a16e-49a0-a53c-99d9856e983e 9160 zram1 50M /var/log 9161 zram2 0B 9162 9163 ### zramctl: 9164 9165 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT 9166 /dev/zram1 lz4 50M 10.8M 2.9M 3.3M 4 /var/log 9167 /dev/zram0 lzo 482.9M 4K 76B 12K 4 [SWAP] 9168 9169 ### mtab: 9170 9171 /dev/mmcblk0p1 / ext4 rw,noatime,errors=remount-ro,commit=600 0 0 9172 /dev/mmcblk0p1 /var/log.hdd ext4 rw,noatime,errors=remount-ro,commit=600 0 0 9173 /dev/zram1 /var/log ext4 rw,relatime,discard 0 0 9174 9175 ### mmc0:0001 info: 9176 9177 manfid: 0x0000fe 9178 cid: fe3432534431364720000000690091f5 9179 fwrev: 0x0 9180 csd: 400e00325b590001dc277f800a40008b 9181 ocr: 0x00200000 9182 type: SD 9183 date: 01/2009 9184 hwrev: 0x2 9185 dsr: 0x404 9186 serial: 0x00000069 9187 erase_size: 512 9188 uevent: DRIVER=mmcblk MMC_TYPE=SD MMC_NAME=SD16G MODALIAS=mmc:block 9189 ssr: 000000000800000004049000080a190a000800000001000000000000000000000000000000000000000000000000000000000000000000000000000000000000 9190 scr: 0285808300000000 9191 oemid: 0x3432 9192 preferred_erase_size: 4194304 9193 name: SD16G 9194 9195 ### Boot system health: 9196 9197 Time CPU load %cpu %sys %usr %nice %io %irq Tcpu C.St. 9198 15:30:21 1512 MHz 1.31 38% 18% 13% 0% 6% 0% 50.1 °C 0/5 9199 15:30:22 1512 MHz 1.31 99% 38% 49% 0% 11% 0% 50.1 °C 0/5 9200 15:30:22 1512 MHz 1.31 100% 33% 60% 1% 4% 0% 51.3 °C 0/5 9201 15:30:22 1512 MHz 1.31 100% 42% 51% 1% 4% 0% 51.3 °C 0/5 9202 15:30:23 1512 MHz 4.81 98% 29% 56% 1% 10% 0% 51.3 °C 0/5 9203 9204 ### lsusb: 9205 9206 Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 9207 Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 9208 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 9209 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 9210 Bus 004 Device 002: ID 24ae:2013 Shenzhen Rapoo Technology Co., Ltd. Rapoo 2.4G Wireless Device 9211 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub 9212 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub 9213 9214 /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ohci/1p, 12M 9215 /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ohci/1p, 12M 9216 /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ohci/1p, 12M 9217 |__ Port 1: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M 9218 |__ Port 1: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M 9219 |__ Port 1: Dev 2, If 2, Class=Human Interface Device, Driver=usbhid, 12M 9220 /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ehci/1p, 480M 9221 /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ehci/1p, 480M 9222 /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=sunxi-ehci/1p, 480M 9223 9224 ### Userland: 9225 9226 PRETTY_NAME="Armbian 23.8.3 bookworm" 9227 ARMBIAN_PRETTY_NAME="Armbian 23.8.3 bookworm" 9228 9229 ### Installed packages: 9230 9231 ii armbian-bookworm-desktop-xfce 23.8.3 all Armbian desktop for Debian bookworm xfce 9232 ii armbian-bsp-cli-orangepizero2-legacy 23.8.1 arm64 Armbian CLI BSP for board 'orangepizero2' branch 'legacy' 9233 ii armbian-config 23.8.3 all Armbian configuration utility 9234 ii armbian-firmware-full 23.02.2 all Linux firmware-full 9235 ii armbian-zsh 23.8.3 all Armbian improved ZShell (oh-my-zsh...) 9236 ii linux-base 4.9 all Linux image base package 9237 ii linux-dtb-legacy-sun50iw9 23.8.1 arm64 Armbian Linux legacy DTBs in /boot/dtb-4.9.318-legacy-sun50iw9 9238 ii linux-image-legacy-sun50iw9 23.8.1 arm64 Armbian Linux legacy kernel image 4.9.318-legacy-sun50iw9 9239 ii linux-libc-dev:arm64 23.02.2 arm64 Armbian Linux support headers for userspace development 9240 ii linux-u-boot-orangepizero2-legacy 23.8.1 arm64 Das U-Boot for orangepizero2 9241 9242 ### Loaded modules: 9243 9244 Module Size Used by 9245 zram 36864 2 9246 fb_st7735r 16384 1 9247 sprdwl_ng 442368 0 9248 sprdbt_tty 40960 2 9249 uwe5622_bsp_sdio 307200 2 sprdbt_tty,sprdwl_ng 9250 fbtft_device 61440 0 9251 fbtft 57344 2 fbtft_device,fb_st7735r 9252 fb_sys_fops 16384 1 fbtft 9253 syscopyarea 16384 1 fbtft 9254 sysfillrect 16384 1 fbtft 9255 sysimgblt 16384 1 fbtft 9256 fuse 139264 3 9257 9258 ### Current system health: 9259 9260 Time CPU load %cpu %sys %usr %nice %io %irq Tcpu C.St. 9261 17:08:45 1512 MHz 2.63 25% 5% 14% 0% 4% 0% 44.2 °C 0/5 9262 17:08:45 1512 MHz 2.63 5% 2% 0% 1% 0% 0% 44.2 °C 0/5 9263 17:08:45 1512 MHz 2.63 8% 5% 2% 0% 0% 0% 45.7 °C 0/5 9264 17:08:46 1512 MHz 2.63 5% 2% 0% 2% 0% 0% 45.7 °C 0/5 9265 17:08:46 1512 MHz 2.63 10% 5% 5% 0% 0% 0% 45.7 °C 0/5 9266 17:08:48 1512 MHz 2.63 25% 5% 14% 0% 4% 0% 51.2 °C 0/5 9267 17:08:49 1512 MHz 2.63 100% 1% 97% 0% 0% 0% 55.9 °C 0/5 9268 17:08:50 1512 MHz 2.98 74% 1% 72% 0% 0% 0% 56.4 °C 0/5 9269 17:08:50 1512 MHz 2.98 7% 5% 1% 0% 0% 0% 56.4 °C 0/5 9270 17:08:51 1512 MHz 2.98 5% 2% 0% 1% 0% 0% 50.3 °C 0/5 9271 9272 ### resolv.conf 9273 9274 -rw-r--r-- 1 root root 30 Sep 25 17:02 /etc/resolv.conf 9275 # Generated by NetworkManager 9276 9277 ### Current sysinfo: 9278 9279 Linux 4.9.318-legacy-sun50iw9 (opi) 09/25/2023 _aarch64_ (4 CPU) 9280 9281 avg-cpu: %user %nice %system %iowait %steal %idle 9282 14.58 0.01 5.88 4.60 0.00 74.94 9283 9284 Device tps kB_read/s kB_wrtn/s kB_dscd/s kB_read kB_wrtn kB_dscd 9285 ram0 0.00 0.00 0.00 0.00 0 0 0 9286 ram1 0.00 0.00 0.00 0.00 0 0 0 9287 ram2 0.00 0.00 0.00 0.00 0 0 0 9288 ram3 0.00 0.00 0.00 0.00 0 0 0 9289 ram4 0.00 0.00 0.00 0.00 0 0 0 9290 ram5 0.00 0.00 0.00 0.00 0 0 0 9291 ram6 0.00 0.00 0.00 0.00 0 0 0 9292 ram7 0.00 0.00 0.00 0.00 0 0 0 9293 ram8 0.00 0.00 0.00 0.00 0 0 0 9294 ram9 0.00 0.00 0.00 0.00 0 0 0 9295 ram10 0.00 0.00 0.00 0.00 0 0 0 9296 ram11 0.00 0.00 0.00 0.00 0 0 0 9297 ram12 0.00 0.00 0.00 0.00 0 0 0 9298 ram13 0.00 0.00 0.00 0.00 0 0 0 9299 ram14 0.00 0.00 0.00 0.00 0 0 0 9300 ram15 0.00 0.00 0.00 0.00 0 0 0 9301 mmcblk0 37.13 1581.19 2.58 0.00 9385503 15340 0 9302 mmcblk0p1 37.12 1580.84 2.58 0.00 9383399 15340 0 9303 zram0 47.34 35.42 153.93 0.00 210216 913700 0 9304 zram1 0.73 0.50 2.40 0.00 2976 14260 0 9305 zram2 0.00 0.00 0.00 0.00 0 0 0 9306 9307 --procs-- -----------------------memory---------------------- ---swap-- -----io---- -system-- ----------cpu---------- 9308 r b swpd free buff cache si so bi bo in cs us sy id wa st gu 9309 3 0 484508 14440 14888 297328 9 39 402 1 312 458 15 6 75 5 0 0 9310 9311 total used free shared buff/cache available 9312 Mem: 965Mi 702Mi 14Mi 40Mi 304Mi 263Mi 9313 Swap: 482Mi 473Mi 9.8Mi 9314 9315 NAME ALGORITHM DISKSIZE DATA COMPR TOTAL STREAMS MOUNTPOINT 9316 /dev/zram1 lz4 50M 11.9M 3.2M 3.7M 4 /var/log 9317 /dev/zram0 lzo 482.9M 471.2M 134.8M 139.7M 4 [SWAP] 9318 9319 17:08:51 up 1:38, 2 users, load average: 2.98, 2.40, 2.27 9320 9321 [ 5528.824915] sunxi-mmc sdc1: REG_DRV_DL: 0x00030000 9322 [ 5528.824920] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710110 9323 [ 5528.824949] sunxi-mmc sdc1: *****retry:re-send cmd***** 9324 [ 5528.935756] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9325 [ 5528.935852] sunxi-mmc sdc1: *****retry:start***** 9326 [ 5528.935890] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9327 [ 5528.935895] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9328 [ 5528.935922] sunxi-mmc sdc1: *****retry:re-send cmd***** 9329 [ 5529.046729] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9330 [ 5529.046811] sunxi-mmc sdc1: *****retry:start***** 9331 [ 5529.046847] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9332 [ 5529.046852] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9333 [ 5529.046877] sunxi-mmc sdc1: *****retry:re-send cmd***** 9334 [ 5529.157645] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9335 [ 5529.157681] sunxi-mmc sdc1: *****retry:start***** 9336 [ 5529.157716] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9337 [ 5529.157721] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9338 [ 5529.157745] sunxi-mmc sdc1: *****retry:re-send cmd***** 9339 [ 5529.268510] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9340 [ 5529.268603] sunxi-mmc sdc1: *****retry:start***** 9341 [ 5529.268638] sunxi-mmc sdc1: REG_DRV_DL: 0x00030000 9342 [ 5529.268643] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9343 [ 5529.268669] sunxi-mmc sdc1: *****retry:re-send cmd***** 9344 [ 5529.379488] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9345 [ 5529.379579] sunxi-mmc sdc1: *****retry:start***** 9346 [ 5529.379614] sunxi-mmc sdc1: REG_DRV_DL: 0x00030000 9347 [ 5529.379619] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9348 [ 5529.379643] sunxi-mmc sdc1: *****retry:re-send cmd***** 9349 [ 5529.490458] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9350 [ 5529.490493] sunxi-mmc sdc1: *****retry:start***** 9351 [ 5529.490528] sunxi-mmc sdc1: REG_DRV_DL: 0x00030000 9352 [ 5529.490534] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9353 [ 5529.490566] sunxi-mmc sdc1: *****retry:re-send cmd***** 9354 [ 5529.601328] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9355 [ 5529.601364] sunxi-mmc sdc1: *****retry:start***** 9356 [ 5529.601396] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9357 [ 5529.601406] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710110 9358 [ 5529.601432] sunxi-mmc sdc1: *****retry:re-send cmd***** 9359 [ 5529.712241] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9360 [ 5529.712332] sunxi-mmc sdc1: *****retry:start***** 9361 [ 5529.712368] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9362 [ 5529.712373] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710110 9363 [ 5529.712398] sunxi-mmc sdc1: *****retry:re-send cmd***** 9364 [ 5529.823213] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9365 [ 5529.823250] sunxi-mmc sdc1: *****retry:start***** 9366 [ 5529.823285] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9367 [ 5529.823290] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710110 9368 [ 5529.823314] sunxi-mmc sdc1: *****retry:re-send cmd***** 9369 [ 5529.934127] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9370 [ 5529.934218] sunxi-mmc sdc1: *****retry:start***** 9371 [ 5529.934254] sunxi-mmc sdc1: REG_DRV_DL: 0x00030000 9372 [ 5529.934259] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710220 9373 [ 5529.934286] sunxi-mmc sdc1: *****retry:re-send cmd***** 9374 [ 5530.045094] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9375 [ 5530.045184] sunxi-mmc sdc1: *****retry:start***** 9376 [ 5530.045219] sunxi-mmc sdc1: REG_DRV_DL: 0x00030000 9377 [ 5530.045224] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710220 9378 [ 5530.045251] sunxi-mmc sdc1: *****retry:re-send cmd***** 9379 [ 5530.156092] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9380 [ 5530.156224] sunxi-mmc sdc1: *****retry:start***** 9381 [ 5530.156288] sunxi-mmc sdc1: REG_DRV_DL: 0x00030000 9382 [ 5530.156301] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710220 9383 [ 5530.156339] sunxi-mmc sdc1: *****retry:re-send cmd***** 9384 [ 5530.267115] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9385 [ 5530.267170] sunxi-mmc sdc1: *****retry:start***** 9386 [ 5530.267227] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9387 [ 5530.267239] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710220 9388 [ 5530.267277] sunxi-mmc sdc1: *****retry:re-send cmd***** 9389 [ 5530.378085] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9390 [ 5530.378170] sunxi-mmc sdc1: *****retry:start***** 9391 [ 5530.378204] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9392 [ 5530.378209] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710220 9393 [ 5530.378235] sunxi-mmc sdc1: *****retry:re-send cmd***** 9394 [ 5530.488998] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9395 [ 5530.489081] sunxi-mmc sdc1: *****retry:start***** 9396 [ 5530.489116] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9397 [ 5530.489121] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710220 9398 [ 5530.489146] sunxi-mmc sdc1: *****retry:re-send cmd***** 9399 [ 5530.599954] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9400 [ 5530.599992] sunxi-mmc sdc1: *****retry:start***** 9401 [ 5530.600031] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9402 [ 5530.600038] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9403 [ 5530.600069] sunxi-mmc sdc1: *****retry:re-send cmd***** 9404 [ 5530.710876] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9405 [ 5530.710960] sunxi-mmc sdc1: *****retry:start***** 9406 [ 5530.710995] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9407 [ 5530.711000] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9408 [ 5530.711026] sunxi-mmc sdc1: *****retry:re-send cmd***** 9409 [ 5530.821834] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9410 [ 5530.821916] sunxi-mmc sdc1: *****retry:start***** 9411 [ 5530.821950] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9412 [ 5530.821955] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9413 [ 5530.821979] sunxi-mmc sdc1: *****retry:re-send cmd***** 9414 [ 5530.932792] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9415 [ 5530.932884] sunxi-mmc sdc1: *****retry:start***** 9416 [ 5530.932919] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9417 [ 5530.932924] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9418 [ 5530.932952] sunxi-mmc sdc1: *****retry:re-send cmd***** 9419 [ 5531.043761] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9420 [ 5531.043853] sunxi-mmc sdc1: *****retry:start***** 9421 [ 5531.043887] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9422 [ 5531.043892] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9423 [ 5531.043918] sunxi-mmc sdc1: *****retry:re-send cmd***** 9424 [ 5531.154729] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9425 [ 5531.154820] sunxi-mmc sdc1: *****retry:start***** 9426 [ 5531.154854] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9427 [ 5531.154859] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9428 [ 5531.154883] sunxi-mmc sdc1: *****retry:re-send cmd***** 9429 [ 5531.265646] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9430 [ 5531.265695] sunxi-mmc sdc1: *****retry:start***** 9431 [ 5531.265729] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9432 [ 5531.265734] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9433 [ 5531.265755] sunxi-mmc sdc1: *****retry:re-send cmd***** 9434 [ 5531.376573] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9435 [ 5531.376667] sunxi-mmc sdc1: *****retry:start***** 9436 [ 5531.376703] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9437 [ 5531.376708] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9438 [ 5531.376734] sunxi-mmc sdc1: *****retry:re-send cmd***** 9439 [ 5531.487542] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9440 [ 5531.487631] sunxi-mmc sdc1: *****retry:start***** 9441 [ 5531.487666] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9442 [ 5531.487671] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9443 [ 5531.487697] sunxi-mmc sdc1: *****retry:re-send cmd***** 9444 [ 5531.598507] sunxi-mmc sdc1: smc 1 p1 err, cmd 53, RD DTO !! 9445 [ 5531.598547] sunxi-mmc sdc1: *****retry:start***** 9446 [ 5531.598582] sunxi-mmc sdc1: REG_DRV_DL: 0x00000000 9447 [ 5531.598593] sunxi-mmc sdc1: REG_SD_NTSR: 0x81710000 9448 [ 5531.598601] sunxi-mmc sdc1: sunxi v4p1x retry give up 9449 [ 5531.598607] sunxi-mmc sdc1: retry:set phase failed or over retry times 9450 [ 5531.598624] sunxi-mmc sdc1: retry:give up 9451 [ 5531.598667] sdiohal err:dt read fail ret:-110, system_addr=0x4024f000 9452 [ 5531.598672] sdiohal:sdio dump_aon_reg entry 9453 [ 5531.598707] sdiohal:pmu sdio status:[0x140]:0x6b 9454 [ 5531.598735] sdiohal:pmu sdio status:[0x141]:0x3c 9455 [ 5531.598755] sdiohal:pmu sdio status:[0x142]:0xe1 9456 [ 5531.598775] sdiohal:pmu sdio status:[0x143]:0x0 9457 [ 5531.598794] sdiohal:pmu sdio status:[0x144]:0x0 9458 [ 5531.598812] sdiohal:pmu sdio status:[0x145]:0x0 9459 [ 5531.598831] sdiohal:pmu sdio status:[0x146]:0x0 9460 [ 5531.598849] sdiohal:pmu sdio status:[0x147]:0x0 9461 [ 5531.598868] sdiohal:pmu sdio status:[0x148]:0x60 9462 [ 5531.598887] sdiohal:pmu sdio status:[0x149]:0x0 9463 [ 5531.598906] sdiohal:pmu sdio status:[0x14a]:0x0 9464 [ 5531.598925] sdiohal:pmu sdio status:[0x14b]:0x0 9465 [ 5531.598945] sdiohal:pmu sdio status:[0x14c]:0x0 9466 [ 5531.598963] sdiohal:pmu sdio status:[0x14d]:0x0 9467 [ 5531.598982] sdiohal:pmu sdio status:[0x14e]:0x0 9468 [ 5531.599000] sdiohal:pmu sdio status:[0x14f]:0x0 9469 [ 5531.599077] sdiohal:cm4d haddr 0:[0x144]:0x0 9470 [ 5531.599096] sdiohal:cm4d haddr 0:[0x145]:0x20 9471 [ 5531.599115] sdiohal:cm4d haddr 0:[0x146]:0x12 9472 [ 5531.599134] sdiohal:cm4d haddr 0:[0x147]:0x0 9473 [ 5531.599209] sdiohal:cm4i haddr 1:[0x144]:0xe0 9474 [ 5531.599228] sdiohal:cm4i haddr 1:[0x145]:0x40 9475 [ 5531.599247] sdiohal:cm4i haddr 1:[0x146]:0x10 9476 [ 5531.599266] sdiohal:cm4i haddr 1:[0x147]:0x0 9477 [ 5531.599341] sdiohal:cm4s haddr 2:[0x144]:0x7c 9478 [ 5531.599360] sdiohal:cm4s haddr 2:[0x145]:0x6 9479 [ 5531.599379] sdiohal:cm4s haddr 2:[0x146]:0x14 9480 [ 5531.599398] sdiohal:cm4s haddr 2:[0x147]:0x40 9481 [ 5531.599474] sdiohal:dmaw haddr 3:[0x144]:0x0 9482 [ 5531.599493] sdiohal:dmaw haddr 3:[0x145]:0x0 9483 [ 5531.599512] sdiohal:dmaw haddr 3:[0x146]:0x0 9484 [ 5531.599531] sdiohal:dmaw haddr 3:[0x147]:0x0 9485 [ 5531.599645] sdiohal:dmar haddr 4:[0x144]:0x0 9486 [ 5531.599665] sdiohal:dmar haddr 4:[0x145]:0x0 9487 [ 5531.599684] sdiohal:dmar haddr 4:[0x146]:0x0 9488 [ 5531.599703] sdiohal:dmar haddr 4:[0x147]:0x0 9489 [ 5531.599828] sdiohal:aon_to_ahb haddr 5:[0x144]:0x0 9490 [ 5531.599859] sdiohal:aon_to_ahb haddr 5:[0x145]:0x0 9491 [ 5531.599881] sdiohal:aon_to_ahb haddr 5:[0x146]:0x0 9492 [ 5531.599900] sdiohal:aon_to_ahb haddr 5:[0x147]:0x0 9493 [ 5531.599977] sdiohal:axi_to_ahb haddr 6:[0x144]:0x4 9494 [ 5531.599996] sdiohal:axi_to_ahb haddr 6:[0x145]:0xf0 9495 [ 5531.600015] sdiohal:axi_to_ahb haddr 6:[0x146]:0x24 9496 [ 5531.600035] sdiohal:axi_to_ahb haddr 6:[0x147]:0x40 9497 [ 5531.600111] sdiohal:hready_status haddr 7:[0x144]:0xcf 9498 [ 5531.600130] sdiohal:hready_status haddr 7:[0x145]:0xff 9499 [ 5531.600149] sdiohal:hready_status haddr 7:[0x146]:0xf9 9500 [ 5531.600168] sdiohal:hready_status haddr 7:[0x147]:0x70 9501 [ 5531.600171] sdiohal:val:0xc 9502 [ 5531.600220] sdiohal:after reset hready status:[0x144]:0xcf 9503 [ 5531.600238] sdiohal:after reset hready status:[0x145]:0xff 9504 [ 5531.600256] sdiohal:after reset hready status:[0x146]:0xf9 9505 [ 5531.600275] sdiohal:after reset hready status:[0x147]:0x70 9506 [ 5531.600278] sdiohal:sdio dump_aon_reg end 9507 9508 [ 5531.600281] sdiohal:sdiohal_abort 9509 [ 5531.600286] sdiohal:carddump flag set[1] 9510 [ 5531.600315] sdiohal:disable rx int for dump 9511 [ 5531.600321] sdiohal:chn8 tx push old, cmdid=25, mstime=5527952, record_time=5527952 9512 [ 5531.600330] chn8 tx push old: 00 00 00 00 10 19 a5 00 90 59 54 00 00 00 00 00 .........YT..... 9513 [ 5531.600335] sdiohal:chn8 tx denq old, cmdid=25, mstime=5527952, record_time=5527955 9514 [ 5531.600339] chn8 tx denq old: 80 52 00 08 10 19 a5 00 90 59 54 00 00 00 00 00 .R.......YT..... 9515 [ 5531.600344] sdiohal:chn22 rx dispatch old, cmdid=27, mstime=5527848, record_time=5527853 9516 [ 5531.600348] chn22 rx dispatch old: 3f 06 00 0a 00 1b 0c 00 28 59 54 00 00 38 00 00 ?.......(YT..8.. 9517 [ 5531.600353] sdiohal:chn8 tx push new, cmdid=11, mstime=5527958, record_time=5527958 9518 [ 5531.600357] chn8 tx push new: 00 00 00 00 10 0b 57 00 96 59 54 00 00 00 00 00 ......W..YT..... 9519 [ 5531.600361] sdiohal:chn8 tx denq new, cmdid=11, mstime=5527958, record_time=5527958 9520 [ 5531.600366] chn8 tx denq new: 80 2b 00 08 10 0b 57 00 96 59 54 00 00 00 00 00 .+....W..YT..... 9521 [ 5531.600370] sdiohal:chn22 rx dispatch new, cmdid=25, mstime=5527952, record_time=5527958 9522 [ 5531.600375] chn22 rx dispatch new: 3f 06 00 0a 00 19 0c 00 90 59 54 00 00 39 00 00 ?........YT..9.. 9523 [ 5531.600381] WCN_ERR: mdbg_dump_data dump memory error:-110 9524 [ 5531.600394] WCN: mdbg dump bt modem 0 ok! 9525 [ 5531.600399] WCN_ERR: read HCI_ARM_WR_RD_MODE reg error:-1 9526 [ 5531.600413] WCN_ERR: mdbg_dump_data dump memory error:-1 9527 [ 5531.600418] WCN: mdbg dump bt_cmd buf 0 ok! 9528 [ 5531.600422] WCN_ERR: mdbg_dump_data dump memory error:-1 9529 [ 5531.600427] WCN: mdbg dump btevent buf 0 ok! 9530 [ 5531.600431] WCN_ERR: mdbg_dump_data dump memory error:-1 9531 [ 5531.600435] WCN: mdbg dump bt_lmp_tx_buf 0 ok! 9532 [ 5531.600440] WCN_ERR: mdbg_dump_data dump memory error:-1 9533 [ 5531.600444] WCN: mdbg dump bt_lmp_rx_buf 0 ok! 9534 [ 5531.600449] WCN_ERR: mdbg_dump_data dump memory error:-1 9535 [ 5531.600453] WCN: mdbg dump bt_acl_tx_buf0 ok! 9536 [ 5531.600457] WCN_ERR: mdbg_dump_data dump memory error:-1 9537 [ 5531.600462] WCN: mdbg dump bt_acl_rx_buf 0 ok! 9538 [ 5531.600466] WCN_ERR: mdbg_dump_data dump memory error:-1 9539 [ 5531.600470] WCN: mdbg dump bt_sco_tx_buf 0 ok! 9540 [ 5531.600475] WCN_ERR: mdbg_dump_data dump memory error:-1 9541 [ 5531.600479] WCN: mdbg dump bt_sco_rx_buf 0 ok! 9542 [ 5531.600483] WCN_ERR: mdbg_dump_data dump memory error:-1 9543 [ 5531.600488] WCN: mdbg dump bt_bb_tx_buf 0 ok! 9544 [ 5531.600492] WCN_ERR: mdbg_dump_data dump memory error:-1 9545 [ 5531.600496] WCN: mdbg dump bt_bb_rx_buf 0 ok! 9546 [ 5531.646525] WCN: dumpmem_rx_callback 9547 [ 5531.646535] WCN: dump str finish! 9548 [ 5531.646538] WCN: mdbg dump memory finish 9549 [ 5531.646564] sdiohal err:sdiohal_adma_pt_read line 510 dump happened 9550 [ 5531.646568] sdiohal err:adma read fail ret:-19 9551 [ 5531.876603] WCN: stop_loopcheck 9552 [ 5537.210058] WCN: mdbg_assert_interface:[CMD] WIFI_CMD_SCAN, [REASON] CMD_RSP_TIMEOUT_ERROR 9553 [ 5537.210077] sdiohal:carddump flag set[1] 9554 [ 5537.210150] sdiohal:disable rx int for dump 9555 [ 5537.210162] sdiohal:chn8 tx push old, cmdid=25, mstime=5527952, record_time=5527952 9556 [ 5537.210174] chn8 tx push old: 00 00 00 00 10 19 a5 00 90 59 54 00 00 00 00 00 .........YT..... 9557 [ 5537.210180] sdiohal:chn8 tx denq old, cmdid=25, mstime=5527952, record_time=5527955 9558 [ 5537.210184] chn8 tx denq old: 80 52 00 08 10 19 a5 00 90 59 54 00 00 00 00 00 .R.......YT..... 9559 [ 5537.210189] sdiohal:chn22 rx dispatch old, cmdid=27, mstime=5527848, record_time=5527853 9560 [ 5537.210194] chn22 rx dispatch old: 3f 06 00 0a 00 1b 0c 00 28 59 54 00 00 38 00 00 ?.......(YT..8.. 9561 [ 5537.210198] sdiohal:chn8 tx push new, cmdid=11, mstime=5527958, record_time=5527958 9562 [ 5537.210203] chn8 tx push new: 00 00 00 00 10 0b 57 00 96 59 54 00 00 00 00 00 ......W..YT..... 9563 [ 5537.210208] sdiohal:chn8 tx denq new, cmdid=11, mstime=5527958, record_time=5527958 9564 [ 5537.210213] chn8 tx denq new: 80 2b 00 08 10 0b 57 00 96 59 54 00 00 00 00 00 .+....W..YT..... 9565 [ 5537.210218] sdiohal:chn22 rx dispatch new, cmdid=25, mstime=5527952, record_time=5527958 9566 [ 5537.210223] chn22 rx dispatch new: 3f 06 00 0a 00 19 0c 00 90 59 54 00 00 39 00 00 ?........YT..9.. 9567 [ 5537.210227] WCN_ERR: Not dump again! 9568 [ 5543.137795] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready 9569 [ 5549.247975] systemd-journald[1921]: Data hash table of /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal has a fill level at 75.0 (1654 of 2204 items, 1269760 file size, 767 bytes per hash table item), suggesting rotation. 9570 [ 5549.248004] systemd-journald[1921]: /run/log/journal/e9c8407423c44a66b4ba6432f86d3639/system.journal: Journal header limits reached or header out-of-date, rotating. 9571 9572 9573 9574 ### interrupts: 9575 CPU0 CPU1 CPU2 CPU3 9576 3: 199127 209462 208307 179917 wakeupgen 48 Level sun4i_timer0 9577 6: 848063 721119 701849 726177 GIC-0 27 Level arch_timer 9578 8: 0 0 0 0 wakeupgen 61 Level 30f0000.iommu 9579 151: 0 0 0 0 sunxi_pio_edge 134 Edge sdc0 cd 9580 193: 0 0 0 0 sunxi_pio_edge 176 Edge bt_wake_isr 9581 273: 483 0 0 0 wakeupgen 42 Level 3002000.dma-controller 9582 275: 0 0 0 0 wakeupgen 106 Level RemoteIR_RX 9583 276: 0 0 0 0 wakeupgen 104 Level rtc 9584 278: 0 0 0 0 wakeupgen 93 Level cedar_dev 9585 280: 298 0 0 0 wakeupgen 0 Level uart0 9586 283: 0 0 0 0 wakeupgen 9 Level twi3 9587 284: 138080 0 0 0 wakeupgen 105 Level twi5 9588 285: 0 0 0 0 wakeupgen 25 Level sunxi_usb_udc 9589 288: 2 0 0 0 wakeupgen 28 Level ehci_hcd:usb1 9590 289: 94396 0 0 0 wakeupgen 29 Level ohci_hcd:usb4 9591 290: 0 0 0 0 wakeupgen 30 Level ehci_hcd:usb2 9592 291: 0 0 0 0 wakeupgen 31 Level ohci_hcd:usb5 9593 292: 0 0 0 0 wakeupgen 32 Level ehci_hcd:usb3 9594 293: 0 0 0 0 wakeupgen 33 Level ohci_hcd:usb6 9595 294: 0 0 0 0 wakeupgen 12 Level spi0 9596 295: 504 0 0 0 wakeupgen 13 Level spi1 9597 298: 3567 0 0 239620 wakeupgen 35 Level sunxi-mmc0 9598 299: 104922 0 0 0 wakeupgen 36 Level sunxi-mmc1 9599 300: 9 0 0 0 wakeupgen 88 Level dispaly 9600 303: 355994 0 0 0 wakeupgen 66 Level dispaly 9601 314: 0 0 0 0 wakeupgen 91 Edge ss 9602 316: 0 0 0 0 wakeupgen 89 Level 1420000.deinterlace 9603 319: 0 0 0 0 wakeupgen 20 Edge sunxikbd 9604 320: 0 0 0 0 wakeupgen 14 Level gmac0 9605 IPI0: 624833 665809 618948 567108 Rescheduling interrupts 9606 IPI1: 1658 2105 2104 2033 Function call interrupts 9607 IPI2: 0 0 0 0 CPU stop interrupts 9608 IPI3: 5958 12785 18303 20397 Timer broadcast interrupts 9609 IPI4: 2433 2158 1928 2034 IRQ work interrupts 9610 IPI5: 0 0 0 0 CPU wake-up interrupts 9611 Err: 0 Please upload the whole output above to an online pasteboard service and provide the URL in the forum where you have been asked for this.