Juan Rangel

Thanks SteeMan, thanks a lot. Then after backup, I will try to "improve" or "check" all things in the "sd card installation". Thanks, in the first photo of my screen, just above lsblk command, you can see "UNABLE TO FIND YOUR EMMC DRIVE or YOU ALREADY RUN FROM EMMC !!!" I dont know if this helps and it is or isn't normal: in the second photo also says: Does give you a "Key" ? Thansk

I have open it, and the chip is this: FORESEE NCEMBSF9-16G, I think it is a real emmc.

Hi, I want to make step by step and I am reading all post that I can't, but I have not information about this. I can use linux commands, but I am a newbie. I have download and flash a micro sd as this links steps (I think there are the same what I have read in several posts here: https://i12bretro.github.io/tutorials/0269.html Firmware donwloaded from https://forum.armbian.com/topic/17106-installation-instructions-for-tv-boxes-with-amlogic-cpus (https://es.sbcmirror.org/dl/aml-s9xx-box/archive/) This one: Armbian_23.11.1_Aml-s9xx-box_bookworm_current_6.1.63_xfce_desktop.img.xz Checked SHA256 And flash Boot is ok with armbian. Yesterday I had problem to boot in android after taking off the micro sd card, but today I was preparing to record you some photos and .... android boots, so no problem here. So next step is backup android partition just in case. I have a Mini MXIII-II with 2gb and 16gb emmc S905X So, as my sd card is only 8gb, I plug a 16gb usb to my tv box. This is my situation: 1. u-boot correctly choosen 2. extlinux/extlinux.conf is this: LABEL Armbian LINUX /Image INITRD /uInitrd #FDT /dtb/amlogic/meson-gxbb-p200.dtb FDT /dtb/amlogic/meson-gxl-s905x-p212.dtb #FDT /dtb/amlogic/meson-gxl-s905w-tx3-mini.dtb #FDT /dtb/amlogic/meson-gxm-q200.dtb #FDT /dtb/amlogic/meson-g12a-x96-max.dtb #FDT /dtb/amlogic/meson-g12b-odroid-n2.dtb append root=UUID=b2d62f8f-4a4c-49bb-a09e-779ec9099bb9 rootflags=data=writeback console=ttyAML0,115200n8 console=tty0 rw no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 splash plymouth.ignore-serial-consoles 3. Some information of my boot with the armbian sd card: ddbr doesn't detect emmc, but I think that I can see it in lsblk: mmcblk1, can't I? I am newbie, so probably I need something about mount or something like that? Or there is also something wrong in extlinux.conf (append root line?) ? Thanks a lot for your support. After I can make the backup, I will try to install from SD card to EMMC. Then I will solve the problem about audio. I understand that once I have "linux" installed in emmc I can boot with any bootable usb drive, update drivers, and so on, isn't it?