Jump to content

Tu Hu

  • Posts

  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. @going: it's strange,Armbian_23.10_Bananapim3_bookworm_edge_6.4.16_minimal.img doesn't work at all on my board.
  2. @going i tested Armbian_23.10_Bananapim3_bookworm_edge_6.4.10_minimal.zip, it works also on my borad, but if i change the language from RU to US, then dead😵‍💫
  3. @goingmy moard: Bpi-M3 v1.2 AXP813 RTL8211E i can not see the info of LPDDR3, the heat sink glued on the chips
  4. @Gunjan Guptafirst boot with ethernet, works☺️, but run upgrade... dad 😩(log8), new booted.... (log9😩) log8.txt log9.txt
  5. @Gunjan Gupta in the Armbian_5.83_Bananapim3> armbian-image-release # PLEASE DO NOT EDIT THIS FILE BOARD=bananapim3 BOARD_NAME="Banana Pi M3" BOARDFAMILY=sun8i VERSION=5.83 LINUXFAMILY=sunxi BRANCH=next ARCH=arm IMAGE_TYPE=stable BOARD_TYPE=csc INITRD_ARCH=arm KERNEL_IMAGE_TYPE=zImage IMAGE_UUID=0de509c3-93b2-4c43-b227-2a5a7d0ed2aa
  6. @Gunjan Gupta@going dmesg output lod_5.83_notime.txt
  7. @Gunjan Guptaagain with debug log6.txt
  8. @Gunjan Guptai can not find the links of img (Armbian_5.83_Bananapim3_Debian_stretch_next_4.19.38.img), i just have a backup in my disk. the log is very short. log3.txt
  9. @Gunjan Guptathanks for your suggestion. I use always barrel jack. I'm not sure, the power supply hat problem. The old IMG 5.83 works very well on my board.
  10. @Gunjan Guptai have tested 3 different power supplys, nothing changed😥
  11. @Gunjan Gupta again logs from 24.2 log.txt
  12. @Gunjan Guptathanks, i changed the armbianEnv.txt and got the logs log.txt and with img 24.2 got log2.txt log2.txt
  13. @Werneru r right, i changed the speed to 115200, but still didn't work on Windows, but on linux it works:) i got some screenshot, m3 booted to staring kernel.... then reboot, i didn't see any error message
  14. @Wernerthanks. i can not connect to my M3 board via putty, i will try it on linux agagin.
  15. @goingyes, i used HDMI. Sorry, i don't know, how can i get uart output🥺. via UART-->TTL and special programm? during the booting, i saw, error at console-setup.service
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines