daniele95100

Hi, any hint on how to debug this one? This issue makes it very difficult to use those SBCs as an headless server and I would like to use them instead of turning them to e-waste. @c0rnelius maybe I've not disabled the driver correctly, can you give me an hint on how to disable it from the DTS?

Hi, sorry for the late reply, tried both the suggestion but the problem still remains. What I've noticed is that the panic happen at the first boot every time, but then it happens randomly. In details the process is: first boot panic every times reboot after the first panic complete the setup process the system seems stable until a new panic happens (last time it happened after ~30hrs)

Mmh, ok but how can I do that if it panic before reaching the login?

You mean to compile myself an Armbian image? Thanks! I'll give it a shot.

Any help on this one? I still can't figure out what's happening here.

Thanks, maybe I've found the problem, by default the param disp_mode is set to 1920x1080p60 in /boot/armbianEnv.txt, setting this to none seems to have fixed the issue. Is it correct for an headless setup? And was actually this setting causing the kernel panics? In my previous tests the display was 480p while testing with an actual 1080p 60fps display seemed stable. EDIT: it happened again but it succesfully booted this time [ 443.082858] Internal error: Oops: 0000000096000004 [#1] SMP [ 443.088462] Modules linked in: lz4hc lz4 zram hci_uart btqca btrtl btintel btbcm r8723bs(C) snd_soc_hdmi_codec bluetooth polyval_ce cfg80211 sunxi_cedrus(C) snd_soc_simple_card ecdh_generic polyval_generic snd_soc_simple_card_utils rfkill sun9i_hdmi_audio libarc4 axp20x_adc ecc lima axp20x_battery axp20x_ac_power sun4i_gpadc_iio gpu_sched sun8i_a33_mbus dw_hdmi_i2s_audio dw_hdmi_cec v4l2_mem2mem drm_shmem_helper sun4i_i2s binfmt_misc videobuf2_dma_contig industrialio videobuf2_memops videobuf2_v4l2 videodev videobuf2_common display_connector mc cpufreq_dt fuse dm_mod pinctrl_axp209 realtek dwmac_sun8i mdio_mux [ 443.142637] CPU: 3 PID: 2172 Comm: modinfo Tainted: G WC 6.6.16-current-sunxi64 #1 [ 443.151520] Hardware name: Pine64+ (DT) [ 443.155366] pstate: 400000c5 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 443.162338] pc : pick_next_task_fair+0x100/0x3f4 [ 443.166989] lr : pick_next_task_fair+0x130/0x3f4 [ 443.171624] sp : ffff8000832bbc50 [ 443.174950] x29: ffff8000832bbc50 x28: ffff000004c55400 x27: ffff80008105df50 [ 443.182100] x26: ffff00003fda1380 x25: ffff80008115d390 x24: ffff00003fda1380 [ 443.189251] x23: ffff00003fda1300 x22: ffff8000832bbd08 x21: ffff000004c55400 [ 443.196401] x20: ffff0000029c9000 x19: 0000000000000000 x18: ffff8000832bbc58 [ 443.203548] x17: 0000000000000000 x16: ffff800080f6bc10 x15: 0000b5b17cbbb478 [ 443.210698] x14: 07f353bbb346defe x13: 0000000000000001 x12: 0000000000000001 [ 443.217848] x11: 0000000000000001 x10: 00000000000002cc x9 : ffff0000029c9000 [ 443.224999] x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000002 [ 1043.720544] 0xffff8000814fbe60x15cate:R running task stack:0 pid:15 ppid:2 flags:0x0000000acpu=2

Hi, I've opened with tag orangepiprime because there was no a64 tag eventhough in the Armbian site is flagged as standard support, tell me if i have to reopen it elsewhere. Anyhow I'm constantly getting kernel panics during boot, I've tested images minimal/cli images starting from 23.5.1 down to 24.5.0 (just downloaded the image and flashed with balena etcher), attached there are all the serial logs of the boot processes, all of them are the same more or less. I've tried: powering from GPIO changing powersupply changing usb cable 4 different uSD cards changing the board hooking it up to a display and none of them worked. What else can I try? Armbian_24.5.0-trunk.223_Pine64_trixie_current_6.6.22_minimal.img.xz.log Armbian_24.2.1_Pine64_bookworm_current_6.6.16_minimal.img.xz.log Armbian_23.11.1_Pine64_bookworm_current_6.1.63.img.xz.log Armbian_23.8.1_Pine64_bookworm_current_6.1.47.img.xz.log Armbian_23.5.1_Pine64_bookworm_current_6.1.30.img.xz.log